arago.conf: disable buildpaths QA errors in meta-qt5
PATCH 1/1 arago.conf: disable buildpaths QA errors in meta-qt5
From: Denys Dmytriyenko <[email protected]>
As meta-qt5 is not going to fix the issues causing the errors:
https://github.com/meta-qt5/meta-qt5/issues/575
--- meta-arago-distro/conf/distro/arago.conf | 4 ++++ 1 file changed, 4 insertions(+)
meta-arago-distro/conf/distro/arago.conf +4 -0
@@ -188,3 +188,7 @@ LICENSE_FLAGS_ACCEPTED = "commercial_gst-ffmpeg commercial_gstreamer1.0-libav co # Do not package own copy of perl into devkit, rely on host one ASSUME_PROVIDED += "nativesdk-perl" + +# https://github.com/meta-qt5/meta-qt5/issues/575 +ERROR_QA:remove:layer-qt5-layer = "buildpaths" +WARN_QA:append:layer-qt5-layer = " buildpaths"
Signature · 1 line
2.25.1
PATCH 1/1 ti-llvm: adopt an LLVM fix for buildpaths errors
From: Denys Dmytriyenko <[email protected]>
Make sure llvm-configs doesn't have absolute build paths.
--- meta-arago-extras/recipes-core/llvm/ti-llvm3.6_3.6.bb | 5 +++++ 1 file changed, 5 insertions(+)
meta-arago-extras/recipes-core/llvm/ti-llvm3.6_3.6.bb +5 -0
@@ -62,6 +62,11 @@ EXTRA_OECONF += " --enable-targets="host,arm,c6000,msp430" \ EXTRA_OEMAKE += "LIBXML2_INC="${LIBXML2_INC}" LIBXML2_LIBS="${LIBXML2_LIBS}"" +# patch out build host paths for reproducibility +do_compile:prepend() { + sed -i -e "s,${WORKDIR},,g" ${LLVM_BUILD_DIR}/tools/llvm-config/Release/BuildVariables.inc +} + do_compile:class-native() { cd ${LLVM_BUILD_DIR}
Signature · 1 line
2.25.1
Re: [meta-arago] [master][PATCH] ti-llvm: adopt an LLVM fix for buildpaths errors
Quoted 15 lines · Denys Dmytriyenko
From: Denys Dmytriyenko <[email protected]>
Make sure llvm-configs doesn't have absolute build paths.
Signed-off-by Denys Dmytriyenko <[email protected]>--- meta-arago-extras/recipes-core/llvm/ti-llvm3.6_3.6.bb | 5 +++++ 1 file changed, 5 insertions(+)meta-arago-extras/recipes-core/llvm/ti-llvm3.6_3.6.bb +0
-0@@ -62,6 +62,11 @@ EXTRA_OECONF += " --enable-targets="host,arm,c6000,msp430" \
meta-arago-extras/recipes-core/llvm/ti-llvm3.6_3.6.bb EXTRA_OECONF += " --enable-targets="host,arm,c6000,msp430" \ · line 72
Quoted 10 lines
meta-arago-extras/recipes-core/llvm/ti-llvm3.6_3.6.bb +5
-0EXTRA_OEMAKE += "LIBXML2_INC="${LIBXML2_INC}" LIBXML2_LIBS="${LIBXML2_LIBS}"" +# patch out build host paths for reproducibility +do_compile:prepend() { + sed -i -e "s,${WORKDIR},,g" ${LLVM_BUILD_DIR}/tools/llvm-config/Release/BuildVariables.inc +} + do_compile:class-native() { cd ${LLVM_BUILD_DIR}
I'm getting build errors with this.
native:
sed: can't read /scratch/jenkins_builds/arago-master-wip/build/build/arago-tmp-default-glibc/work/x86_64-linux/ti-llvm3.6-native/3.6/llvm-3.6.build/tools/llvm-config/Release/BuildVariables.inc: No such file or directory
nativesdk:
sed: can't read /scratch/jenkins_builds/arago-master-wip/build/build/arago-tmp-default-glibc/work/x86_64-nativesdk-arago-linux/nativesdk-ti-llvm3.6/3.6/llvm-3.6.build/tools/llvm-config/Release/BuildVariables.inc: No such file or directory
Signature · 3 lines
Ryan Eatmon [email protected] ----------------------------------------- Texas Instruments, Inc. - LCPD - MGTS
A message that is not in the archive (sent off-list or not yet received): [email protected]
Re: [meta-arago] [master][PATCH] ti-llvm: adopt an LLVM fix for buildpaths errors
Quoted 30 lines · Ryan Eatmon via lists.yoctoproject.org
Quoted 22 lines · Denys Dmytriyenko
From: Denys Dmytriyenko <[email protected]>
Make sure llvm-configs doesn't have absolute build paths.
Signed-off-by Denys Dmytriyenko <[email protected]>---
meta-arago-extras/recipes-core/llvm/ti-llvm3.6_3.6.bb | 5 +++++1 file changed, 5 insertions(+)meta-arago-extras/recipes-core/llvm/ti-llvm3.6_3.6.bb +0
-1@@ -62,6 +62,11 @@ EXTRA_OECONF += " --enable-targets="host,arm,c6000,msp430" \
EXTRA_OEMAKE+= "LIBXML2_INC="${LIBXML2_INC}" LIBXML2_LIBS="${LIBXML2_LIBS}""meta-arago-extras/recipes-core/llvm/ti-llvm3.6_3.6.bb +3
-0+# patch out build host paths for reproducibility +do_compile:prepend() { + sed -i -e "s,${WORKDIR},,g"${LLVM_BUILD_DIR}/tools/llvm-config/Release/BuildVariables.inc
meta-arago-extras/recipes-core/llvm/ti-llvm3.6_3.6.bb +2
-0+} +Quoted 2 lines
do_compile:class-native() {
cd ${LLVM_BUILD_DIR}I'm getting build errors with this.
Quoted 8 lines
native:
sed: can't read /scratch/jenkins_builds/arago-master-wip/build/build/arago-tmp-default-glibc/work/x86_64-linux/ti-llvm3.6-native/3.6/llvm-3.6.build/tools/llvm-config/Release/BuildVariables.inc: No such file or directory
nativesdk:
sed: can't read /scratch/jenkins_builds/arago-master-wip/build/build/arago-tmp-default-glibc/work/x86_64-nativesdk-arago-linux/nativesdk-ti-llvm3.6/3.6/llvm-3.6.build/tools/llvm-config/Release/BuildVariables.inc: No such file or directory
I think that during the build it creates this file, but before the builds the files does not exist yet. Maybe you tested this against a built directory where the file existed but from a clean dir it fails?
Signature · 3 lines
Ryan Eatmon [email protected] ----------------------------------------- Texas Instruments, Inc. - LCPD - MGTS
A message that is not in the archive (sent off-list or not yet received): [email protected]
Re: [meta-arago] [master][PATCH] ti-llvm: adopt an LLVM fix for buildpaths errors
Quoted 35 lines · Ryan Eatmon via lists.yoctoproject.org
Quoted 32 lines · Ryan Eatmon via lists.yoctoproject.org
Quoted 22 lines · Denys Dmytriyenko
From: Denys Dmytriyenko <[email protected]>
Make sure llvm-configs doesn't have absolute build paths.
Signed-off-by Denys Dmytriyenko <[email protected]>---
meta-arago-extras/recipes-core/llvm/ti-llvm3.6_3.6.bb | 5 +++++1 file changed, 5 insertions(+)meta-arago-extras/recipes-core/llvm/ti-llvm3.6_3.6.bb +0
-1@@ -62,6 +62,11 @@ EXTRA_OECONF += " --enable-targets="host,arm,c6000,msp430" \
EXTRA_OEMAKE+= "LIBXML2_INC="${LIBXML2_INC}" LIBXML2_LIBS="${LIBXML2_LIBS}""meta-arago-extras/recipes-core/llvm/ti-llvm3.6_3.6.bb +3
-0+# patch out build host paths for reproducibility +do_compile:prepend() { + sed -i -e "s,${WORKDIR},,g"${LLVM_BUILD_DIR}/tools/llvm-config/Release/BuildVariables.inc
meta-arago-extras/recipes-core/llvm/ti-llvm3.6_3.6.bb +2
-0+} +Quoted 2 lines
do_compile:class-native() {
cd ${LLVM_BUILD_DIR}I'm getting build errors with this.
native:
Quoted 9 lines
Quoted 6 lines
sed: can't read /scratch/jenkins_builds/arago-master-wip/build/build/arago-tmp-default-glibc/work/x86_64-linux/ti-llvm3.6-native/3.6/llvm-3.6.build/tools/llvm-config/Release/BuildVariables.inc: No such file or directory
nativesdk:
sed: can't read /scratch/jenkins_builds/arago-master-wip/build/build/arago-tmp-default-glibc/work/x86_64-nativesdk-arago-linux/nativesdk-ti-llvm3.6/3.6/llvm-3.6.build/tools/llvm-config/Release/BuildVariables.inc: No such file or directory
I think that during the build it creates this file, but before the builds the files does not exist yet. Maybe you tested this against a built directory where the file existed but from a clean dir it fails?
Also, it looks the contents of the BuildVariables.inc might be in a "bad" state with this change. But I could be wrong as I don't know how all of this package works.
#define LLVM_SRC_ROOT "/git"
#define LLVM_OBJ_ROOT "/llvm-3.6.build"
By just replacing the WORKDIR with "" we are pointing this file to the root directory where I doubt these things will be living. Again, without knowing how this package works and uses those two variables I can't speak as to the correctness of this. I agree it fixes the buildpaths issue, but does it break the software package at that point?
Signature · 3 lines
Ryan Eatmon [email protected] ----------------------------------------- Texas Instruments, Inc. - LCPD - MGTS
Re: [meta-arago] [master][PATCH] ti-llvm: adopt an LLVM fix for buildpaths errors
Quoted 63 lines · Ryan Eatmon
Quoted 43 lines · Ryan Eatmon via lists.yoctoproject.org
Quoted 40 lines · Ryan Eatmon via lists.yoctoproject.org
Quoted 25 lines · Denys Dmytriyenko
From: Denys Dmytriyenko <[email protected]>
Make sure llvm-configs doesn't have absolute build paths.
Signed-off-by Denys Dmytriyenko <[email protected]>---
meta-arago-extras/recipes-core/llvm/ti-llvm3.6_3.6.bb | 5 +++++1 file changed, 5 insertions(+)diff --git a/meta-arago-extras/recipes-core/llvm/ti-llvm3.6_3.6.bb b/meta-arago-extras/recipes-core/llvm/ti-llvm3.6_3.6.bb index
4b990b7f..810c603b100644meta-arago-extras/recipes-core/llvm/ti-llvm3.6_3.6.bb +0
-1@@ -62,6 +62,11 @@ EXTRA_OECONF += " --enable-targets="host,arm,c6000,msp430" \
EXTRA_OEMAKE+= "LIBXML2_INC="${LIBXML2_INC}"
LIBXML2_LIBS="${LIBXML2_LIBS}""meta-arago-extras/recipes-core/llvm/ti-llvm3.6_3.6.bb +3
-0+# patch out build host paths for reproducibility +do_compile:prepend() { + sed -i -e "s,${WORKDIR},,g"${LLVM_BUILD_DIR}/tools/llvm-config/Release/BuildVariables.inc
meta-arago-extras/recipes-core/llvm/ti-llvm3.6_3.6.bb +2
-0+} +Quoted 2 lines
do_compile:class-native() {
cd ${LLVM_BUILD_DIR}I'm getting build errors with this.
native:
sed: can't read /scratch/jenkins_builds/arago-master-wip/build/build/arago-tmp-default-glibc/work/x86_64-linux/ti-llvm3.6-native/3.6/llvm-3.6.build/tools/llvm-config/Release/BuildVariables.inc:
No such file or directorynativesdk:
Quoted 9 lines
Quoted 3 lines
sed: can't read /scratch/jenkins_builds/arago-master-wip/build/build/arago-tmp-default-glibc/work/x86_64-nativesdk-arago-linux/nativesdk-ti-llvm3.6/3.6/llvm-3.6.build/tools/llvm-config/Release/BuildVariables.inc:
No such file or directoryI think that during the build it creates this file, but before the builds the files does not exist yet. Maybe you tested this against a built directory where the file existed but from a clean dir it fails?
Also, it looks the contents of the BuildVariables.inc might be in a "bad" state with this change. But I could be wrong as I don't know how all of this package works.
#define
LLVM_SRC_ROOT"/git"
#defineLLVM_OBJ_ROOT"/llvm-3.6.build"
Quoted 6 lines
By just replacing the WORKDIR with "" we are pointing this file to the root directory where I doubt these things will be living. Again, without knowing how this package works and uses those two variables I can't speak as to the correctness of this. I agree it fixes the buildpaths issue, but does it break the software package at that point?
This is exactly what OE-Core does with upstream LLVM.
Signature · 1 line
Denys
Re: [meta-arago] [master][PATCH] ti-llvm: adopt an LLVM fix for buildpaths errors
Quoted 64 lines · Denys Dmytriyenko
Quoted 63 lines · Ryan Eatmon
Quoted 43 lines · Ryan Eatmon via lists.yoctoproject.org
Quoted 40 lines · Ryan Eatmon via lists.yoctoproject.org
Quoted 23 lines · Denys Dmytriyenko
From: Denys Dmytriyenko <[email protected]>
Make sure llvm-configs doesn't have absolute build paths.
Signed-off-by Denys Dmytriyenko <[email protected]>--- meta-arago-extras/recipes-core/llvm/ti-llvm3.6_3.6.bb | 5 +++++ 1 file changed, 5 insertions(+)diff --git a/meta-arago-extras/recipes-core/llvm/ti-llvm3.6_3.6.bb b/meta-arago-extras/recipes-core/llvm/ti-llvm3.6_3.6.bb index
4b990b7f..810c603b100644meta-arago-extras/recipes-core/llvm/ti-llvm3.6_3.6.bb +0
-1@@ -62,6 +62,11 @@ EXTRA_OECONF += " --enable-targets="host,arm,c6000,msp430" \ EXTRA_OEMAKE += "LIBXML2_INC="${LIBXML2_INC}"LIBXML2_LIBS="${LIBXML2_LIBS}""
meta-arago-extras/recipes-core/llvm/ti-llvm3.6_3.6.bb +3
-0+# patch out build host paths for reproducibility +do_compile:prepend() { + sed -i -e "s,${WORKDIR},,g"${LLVM_BUILD_DIR}/tools/llvm-config/Release/BuildVariables.inc
meta-arago-extras/recipes-core/llvm/ti-llvm3.6_3.6.bb EXTRA_OECONF += " --enable-targets="host,arm,c6000,msp430" \ · line 71
Quoted 4 lines
meta-arago-extras/recipes-core/llvm/ti-llvm3.6_3.6.bb +2
-0+} + do_compile:class-native() { cd ${LLVM_BUILD_DIR}I'm getting build errors with this.
native:
sed: can't read /scratch/jenkins_builds/arago-master-wip/build/build/arago-tmp-default-glibc/work/x86_64-linux/ti-llvm3.6-native/3.6/llvm-3.6.build/tools/llvm-config/Release/BuildVariables.inc:
No such file or directorynativesdk:
Quoted 9 lines
Quoted 3 lines
sed: can't read /scratch/jenkins_builds/arago-master-wip/build/build/arago-tmp-default-glibc/work/x86_64-nativesdk-arago-linux/nativesdk-ti-llvm3.6/3.6/llvm-3.6.build/tools/llvm-config/Release/BuildVariables.inc:
No such file or directoryI think that during the build it creates this file, but before the builds the files does not exist yet. Maybe you tested this against a built directory where the file existed but from a clean dir it fails?
Also, it looks the contents of the BuildVariables.inc might be in a "bad" state with this change. But I could be wrong as I don't know how all of this package works.
#define
LLVM_SRC_ROOT"/git"
#defineLLVM_OBJ_ROOT"/llvm-3.6.build"
Quoted 9 lines
Quoted 6 lines
By just replacing the WORKDIR with "" we are pointing this file to the root directory where I doubt these things will be living. Again, without knowing how this package works and uses those two variables I can't speak as to the correctness of this. I agree it fixes the buildpaths issue, but does it break the software package at that point?
This is exactly what OE-Core does with upstream LLVM.
Good enough for me then. =)
Signature · 3 lines
Ryan Eatmon [email protected] ----------------------------------------- Texas Instruments, Inc. - LCPD - MGTS
Re: [meta-arago] [master][PATCH] ti-llvm: adopt an LLVM fix for buildpaths errors
Quoted 74 lines · Ryan Eatmon
Quoted 71 lines · Denys Dmytriyenko
Quoted 69 lines · Ryan Eatmon
Quoted 43 lines · Ryan Eatmon via lists.yoctoproject.org
Quoted 40 lines · Ryan Eatmon via lists.yoctoproject.org
Quoted 25 lines · Denys Dmytriyenko
From: Denys Dmytriyenko <[email protected]>
Make sure llvm-configs doesn't have absolute build paths.
Signed-off-by Denys Dmytriyenko <[email protected]>---
meta-arago-extras/recipes-core/llvm/ti-llvm3.6_3.6.bb | 5 +++++1 file changed, 5 insertions(+)diff --git a/meta-arago-extras/recipes-core/llvm/ti-llvm3.6_3.6.bb b/meta-arago-extras/recipes-core/llvm/ti-llvm3.6_3.6.bb index
4b990b7f..810c603b100644meta-arago-extras/recipes-core/llvm/ti-llvm3.6_3.6.bb +0
-1@@ -62,6 +62,11 @@ EXTRA_OECONF += " --enable-targets="host,arm,c6000,msp430" \
EXTRA_OEMAKE+= "LIBXML2_INC="${LIBXML2_INC}"
LIBXML2_LIBS="${LIBXML2_LIBS}""meta-arago-extras/recipes-core/llvm/ti-llvm3.6_3.6.bb +3
-0+# patch out build host paths for reproducibility +do_compile:prepend() { + sed -i -e "s,${WORKDIR},,g"${LLVM_BUILD_DIR}/tools/llvm-config/Release/BuildVariables.inc
meta-arago-extras/recipes-core/llvm/ti-llvm3.6_3.6.bb +2
-0+} +Quoted 2 lines
do_compile:class-native() {
cd ${LLVM_BUILD_DIR}I'm getting build errors with this.
native:
sed: can't read /scratch/jenkins_builds/arago-master-wip/build/build/arago-tmp-default-glibc/work/x86_64-linux/ti-llvm3.6-native/3.6/llvm-3.6.build/tools/llvm-config/Release/BuildVariables.inc:
No such file or directorynativesdk:
Quoted 9 lines
Quoted 3 lines
sed: can't read /scratch/jenkins_builds/arago-master-wip/build/build/arago-tmp-default-glibc/work/x86_64-nativesdk-arago-linux/nativesdk-ti-llvm3.6/3.6/llvm-3.6.build/tools/llvm-config/Release/BuildVariables.inc:
No such file or directoryI think that during the build it creates this file, but before the builds the files does not exist yet. Maybe you tested this against a built directory where the file existed but from a clean dir it fails?
Also, it looks the contents of the BuildVariables.inc might be in a "bad" state with this change. But I could be wrong as I don't know how all of this package works.
#define
LLVM_SRC_ROOT"/git"
#defineLLVM_OBJ_ROOT"/llvm-3.6.build"By just replacing the WORKDIR with "" we are pointing this file to the root directory where I doubt these things will be living. Again, without knowing how this package works and uses those two variables I can't speak as to the correctness of this. I agree it fixes the buildpaths issue, but does it break the software package at that point?
Quoted 4 lines
Quoted 2 lines
This is exactly what OE-Core does with upstream LLVM.
Good enough for me then. =)
The only difference is that much newer LLVM 18.1.8 (vs. 3.6 here) apparently generates BuildVariables.inc file in do_configure() and not in do_compile() so it already exists for the sed command...
Signature · 1 line
Denys
Quoted 16 lines · Denys Dmytriyenko
From: Denys Dmytriyenko <[email protected]>
As meta-qt5 is not going to fix the issues causing the errors:
https://github.com/meta-qt5/meta-qt5/issues/575
Signed-off-by Denys Dmytriyenko <[email protected]>--- meta-arago-distro/conf/distro/arago.conf | 4 ++++ 1 file changed, 4 insertions(+)meta-arago-distro/conf/distro/arago.conf +0
-0
meta-arago-distro/conf/distro/arago.conf LICENSE_FLAGS_ACCEPTED = "commercial_gst-ffmpeg commercial_gstreamer1.0-libav co · line 194
Quoted 7 lines
meta-arago-distro/conf/distro/arago.conf +4
-0@@ -188,3 +188,7 @@ LICENSE_FLAGS_ACCEPTED = "commercial_gst-ffmpeg commercial_gstreamer1.0-libav co # Do not package own copy of perl into devkit, rely on host one ASSUME_PROVIDED += "nativesdk-perl" + +# https://github.com/meta-qt5/meta-qt5/issues/575 +ERROR_QA:remove:layer-qt5-layer = "buildpaths" +WARN_QA:append:layer-qt5-layer = " buildpaths"
Yeah, I saw that and thought this should be the answer. Since meta-arago is not seeking compatible status this should be acceptable.
Signature · 3 lines
Ryan Eatmon [email protected] ----------------------------------------- Texas Instruments, Inc. - LCPD - MGTS