Skip to contentSkip to conversation

Bluetooth: btnxpuart: Switch to SYSTEM_SLEEP_PM_OPS

PATCH In review Fabio Estevam 3 participants 3 messages Nov 22, 2024 – Nov 26, 2024

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Bluetooth: btnxpuart: Switch to SYSTEM_SLEEP_PM_OPS

From: Fabio Estevam <[email protected]>

Replace SET_SYSTEM_SLEEP_PM_OPS() with its modern SYSTEM_SLEEP_PM_OPS() alternative.

The combined usage of pm_sleep_ptr() and SYSTEM_SLEEP_PM_OPS() allows the compiler to evaluate if the suspend/resume() functions are used at build time or are simply dead code.

This allows removing the CONFIG_PM_SLEEP ifdefery from the suspend/resume() functions.

---
 drivers/bluetooth/btnxpuart.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
drivers/bluetooth/btnxpuart.c +2 -4
index 569f5b7d6e46..06c1093c70ab 100644
@@ -1588,7 +1588,6 @@ static void nxp_serdev_remove(struct serdev_device *serdev)
 	hci_free_dev(hdev);
 }
 
-#ifdef CONFIG_PM_SLEEP
 static int nxp_serdev_suspend(struct device *dev)
 {
 	struct btnxpuart_dev *nxpdev = dev_get_drvdata(dev);
@@ -1606,7 +1605,6 @@ static int nxp_serdev_resume(struct device *dev)
 	ps_control(psdata->hdev, PS_STATE_AWAKE);
 	return 0;
 }
-#endif
 
 static struct btnxpuart_data w8987_data __maybe_unused = {
 	.helper_fw_name = NULL,
@@ -1628,7 +1626,7 @@ static const struct of_device_id nxpuart_of_match_table[] __maybe_unused = {
 MODULE_DEVICE_TABLE(of, nxpuart_of_match_table);
 
 static const struct dev_pm_ops nxp_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(nxp_serdev_suspend, nxp_serdev_resume)
+	SYSTEM_SLEEP_PM_OPS(nxp_serdev_suspend, nxp_serdev_resume)
 };
 
 static struct serdev_device_driver nxp_serdev_driver = {
@@ -1637,7 +1635,7 @@ static struct serdev_device_driver nxp_serdev_driver = {
 	.driver = {
 		.name = "btnxpuart",
 		.of_match_table = of_match_ptr(nxpuart_of_match_table),
-		.pm = &nxp_pm_ops,
+		.pm = pm_sleep_ptr(&nxp_pm_ops),
 	},
 };
 
Signature · 1 line
2.34.1
#1 lore raw

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=911801

---Test result---

Test Summary:

CheckPatch                    PENDING   0.43 seconds
GitLint                       PENDING   0.26 seconds
SubjectPrefix                 PASS      0.07 seconds
BuildKernel                   PASS      24.91 seconds
CheckAllWarning               PASS      27.57 seconds
CheckSparse                   PASS      30.16 seconds
BuildKernel32                 PASS      28.02 seconds
TestRunnerSetup               PASS      434.25 seconds
TestRunner_l2cap-tester       PASS      20.16 seconds
TestRunner_iso-tester         FAIL      34.34 seconds
TestRunner_bnep-tester        PASS      4.81 seconds
TestRunner_mgmt-tester        FAIL      121.11 seconds
TestRunner_rfcomm-tester      PASS      7.54 seconds
TestRunner_sco-tester         PASS      13.50 seconds
TestRunner_ioctl-tester       PASS      8.07 seconds
TestRunner_mesh-tester        PASS      5.91 seconds
TestRunner_smp-tester         PASS      6.91 seconds
TestRunner_userchan-tester    PASS      4.95 seconds
IncrementalBuild              PENDING   0.80 seconds

Details
##############################
Test: CheckPatch - PENDING
Desc: Run checkpatch.pl script
Output:

##############################
Test: GitLint - PENDING
Desc: Run gitlint
Output:

##############################
Test: TestRunner_iso-tester - FAIL
Desc: Run iso-tester with test-runner
Output:
WARNING: possible circular locking dependency detected
Total: 124, Passed: 120 (96.8%), Failed: 0, Not Run: 4
##############################
Test: TestRunner_mgmt-tester - FAIL
Desc: Run mgmt-tester with test-runner Output:
Total: 492, Passed: 487 (99.0%), Failed: 1, Not Run: 4

Failed Test Cases
LL Privacy - Start Discovery 2 (Disable RL) Failed 0.202 seconds
##############################
Test: IncrementalBuild - PENDING
Desc: Incremental build with the patches in the series Output:

---
Regards,
Linux Bluetooth

#2 lore raw

PATCH 1/1 Bluetooth: btnxpuart: Switch to SYSTEM_SLEEP_PM_OPS

In reply to Fabio Estevam

Hi Fabio,

Thank you for the patch and the improvement it brings along.

Thanks,
Neeraj

Quoted 60 lines

From: Fabio Estevam <[email protected]>

Replace SET_SYSTEM_SLEEP_PM_OPS() with its modern
SYSTEM_SLEEP_PM_OPS() alternative.

The combined usage of pm_sleep_ptr() and SYSTEM_SLEEP_PM_OPS() allows the compiler to evaluate if the suspend/resume() functions are used at build time or are simply dead code.

This allows removing the CONFIG_PM_SLEEP ifdefery from the suspend/resume() functions.

---
 drivers/bluetooth/btnxpuart.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
drivers/bluetooth/btnxpuart.c +2 -3
index 569f5b7d6e46..06c1093c70ab 100644
@@ -1588,7 +1588,6 @@ static void nxp_serdev_remove(struct
 serdev_device *serdev)
        hci_free_dev(hdev);
 }
 
-#ifdef CONFIG_PM_SLEEP
 static int nxp_serdev_suspend(struct device *dev)  {
        struct btnxpuart_dev *nxpdev = dev_get_drvdata(dev); @@ -1606,7
+1605,6 @@ static int nxp_serdev_resume(struct device *dev)
        ps_control(psdata->hdev, PS_STATE_AWAKE);
        return 0;
 }
-#endif
 
 static struct btnxpuart_data w8987_data __maybe_unused = {
        .helper_fw_name = NULL,
@@ -1628,7 +1626,7 @@ static const struct of_device_id
 nxpuart_of_match_table[] __maybe_unused = {  MODULE_DEVICE_TABLE(of,
 nxpuart_of_match_table);
 
 static const struct dev_pm_ops nxp_pm_ops = {
-       SET_SYSTEM_SLEEP_PM_OPS(nxp_serdev_suspend,
 nxp_serdev_resume)
+       SYSTEM_SLEEP_PM_OPS(nxp_serdev_suspend, nxp_serdev_resume)
 };

static struct serdev_device_driver nxp_serdev_driver = { @@ -1637,7 +1635,7
@@ static struct serdev_device_driver nxp_serdev_driver = {
.driver = {
.name = "btnxpuart",
.of_match_table = of_match_ptr(nxpuart_of_match_table),

drivers/bluetooth/btnxpuart.c +1 -2
-               .pm = &nxp_pm_ops,
+               .pm = pm_sleep_ptr(&nxp_pm_ops),
        },
 };
 
--

2.34.1