x86: Address Space Isolation FPU preparations
PATCH v3 1/12 x86/xstate: Create map/unmap primitives for xsave areas
In reply to Alejandro VallejoAdd infrastructure to simplify ASI handling. With ASI in the picture we'll have several different means of accessing the XSAVE area of a given vCPU, depending on whether a domain is covered by ASI or not and whether the vCPU is question is scheduled on the current pCPU or not.
Having these complexities exposed at the call sites becomes unwieldy very fast. These wrappers are intended to be used in a similar way to map_domain_page() and unmap_domain_page(); The map operation will dispatch the appropriate pointer for each case in a future patch, while unmap will remain a no-op where no unmap is required (e.g: when there's no ASI) and remove the transient maping if one was required.
Follow-up patches replace all uses of raw v->arch.xsave_area by this mechanism in preparation to add the beforementioned dispatch logic to be added at a later time.
---v2->v3:
* Evaluate v in UNMAP (casted to void)
v1->v2:
* Comment macros more heavily to show their performance characteristics.
* Addressed various nits in the macro comments.
* Macro names to uppercase.
--- xen/arch/x86/include/asm/xstate.h | 42 +++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+)
xen/arch/x86/include/asm/xstate.h +42 -0
@@ -143,4 +143,46 @@ static inline bool xstate_all(const struct vcpu *v) (v->arch.xcr0_accum & XSTATE_LAZY & ~XSTATE_FP_SSE); } +/* +* Fetch a pointer to a vCPU's XSAVE area +* +* TL;DR: If v == current, the mapping is guaranteed to already exist. +* +* Despite the name, this macro might not actually map anything. The only case +* in which a mutation of page tables is strictly required is when ASI==on && +* v!=current. For everything else the mapping already exists and needs not +* be created nor destroyed. +* +* +-----------------+--------------+ +* | v == current | v != current | +* +--------------+-----------------+--------------+ +* | ASI enabled | per-vCPU fixmap | actual map | +* +--------------+-----------------+--------------+ +* | ASI disabled | directmap | +* +--------------+--------------------------------+ +* +* There MUST NOT be outstanding maps of XSAVE areas of the non-current vCPU +* at the point of context switch. Otherwise, the unmap operation will +* misbehave. +* +* TODO: Expand the macro to the ASI cases after infra to do so is in place. +* +* @param v Owner of the XSAVE area +*/ +#define VCPU_MAP_XSAVE_AREA (v) ((v)->arch.xsave_area) + +/* +* Drops the mapping of a vCPU's XSAVE area and nullifies its pointer on exit +* +* See VCPU_MAP_XSAVE_AREA() for additional information on the persistence of +* these mappings. This macro only tears down the mappings in the ASI=on && +* v!=current case. +* +* TODO: Expand the macro to the ASI cases after infra to do so is in place. +* +* @param v Owner of the XSAVE area +* @param x XSAVE blob of v +*/ +#define VCPU_UNMAP_XSAVE_AREA (v, x) do { (void)(v); (x) = NULL; } while(0) +#endif /* __ASM_XSTATE_H */
Signature · 1 line
2.47.1
v3 cover x86: Address Space Isolation FPU preparations
See original cover letter in v1
v2: https://lore.kernel.org/xen-devel/[email protected]/v2->v3:
* Evaluated v argument in UNMAP operation (see patch 1)
* Fixed bug on (de)compressing xstates by not unmapping them on early return.
* Constified more when converting (f)xrstor and (f)xsave
v1: https://lore.kernel.org/xen-devel/[email protected]/v1->v2:
* Turned v1/patch1 into an assert removal
* Dropped v1/patch11: "x86/mpx: Adjust read_bndcfgu() to clean after itself"
* Other minor changes out of feedback. Explained in each patch.
Alejandro Vallejo (12):
x86/xstate: Create map/unmap primitives for xsave areas x86/hvm: Map/unmap xsave area in hvm_save_cpu_ctxt() x86/fpu: Map/umap xsave area in vcpu_{reset,setup}_fpu() x86/xstate: Map/unmap xsave area in xstate_set_init() and
handle_setbv()
x86/hvm: Map/unmap xsave area in hvmemul_{get,put}_fpu() x86/domctl: Map/unmap xsave area in arch_get_info_guest() x86/xstate: Map/unmap xsave area in {compress,expand}_xsave_states() x86/emulator: Refactor FXSAVE_AREA to use wrappers x86/mpx: Map/unmap xsave area in in read_bndcfgu() x86/fpu: Pass explicit xsave areas to fpu_(f)xsave() x86/fpu: Pass explicit xsave areas to fpu_(f)xrstor() x86/xstate: Make xstate_all() and vcpu_xsave_mask() take explicit
xstate
xen/arch/x86/domctl.c | 9 ++-- xen/arch/x86/hvm/emulate.c | 12 +++++- xen/arch/x86/hvm/hvm.c | 8 ++-- xen/arch/x86/i387.c | 69 ++++++++++++++++++++----------- xen/arch/x86/include/asm/xstate.h | 51 +++++++++++++++++++++-- xen/arch/x86/x86_emulate/blk.c | 11 ++++- xen/arch/x86/xstate.c | 53 +++++++++++++++++------- 7 files changed, 157 insertions(+), 56 deletions(-)
Signature · 1 line
2.47.1
PATCH v3 2/12 x86/hvm: Map/unmap xsave area in hvm_save_cpu_ctxt()
No functional change.
---v2->v3:
* Added A-by
v1->v2:
* No change
--- xen/arch/x86/hvm/hvm.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
xen/arch/x86/hvm/hvm.c +4 -4
@@ -914,11 +914,11 @@ static int cf_check hvm_save_cpu_ctxt(struct vcpu *v, hvm_domain_context_t *h)if ( v->fpu_initialised ) { -BUILD_BUG_ON (sizeof (ctxt.fpu_regs) != -sizeof (v->arch.xsave_area->fpu_sse)); -memcpy (ctxt.fpu_regs, &v->arch.xsave_area->fpu_sse, -sizeof (ctxt.fpu_regs)); +const struct xsave_struct *xsave_area =VCPU_MAP_XSAVE_AREA (v); +BUILD_BUG_ON (sizeof (ctxt.fpu_regs) !=sizeof (xsave_area->fpu_sse)); +memcpy (ctxt.fpu_regs, &xsave_area->fpu_sse,sizeof (ctxt.fpu_regs)); +VCPU_UNMAP_XSAVE_AREA (v, xsave_area); ctxt.flags =XEN_X86_FPU_INITIALISED ; }
Signature · 1 line
2.47.1
PATCH v3 3/12 x86/fpu: Map/umap xsave area in vcpu_{reset,setup}_fpu()
In reply to Alejandro VallejoNo functional change.
---v2->v3:
* Added A-by
v1->v2:
* No change
--- xen/arch/x86/i387.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-)
xen/arch/x86/i387.c +13 -5
@@ -304,24 +304,32 @@ int vcpu_init_fpu(struct vcpu *v)void vcpu_reset_fpu (struct vcpu *v) { +struct xsave_struct *xsave_area =VCPU_MAP_XSAVE_AREA (v); + v->fpu_initialised = false; - *v->arch.xsave_area = (struct xsave_struct ) { + *xsave_area = (struct xsave_struct ) { .xsave_hdr.xstate_bv =X86_XCR0_X87 , };/* Old gcc doesn't permit these to be part of the initializer. */ - v->arch.xsave_area->fpu_sse.mxcsr =MXCSR_DEFAULT ; - v->arch.xsave_area->fpu_sse.fcw =FCW_RESET ; - v->arch.xsave_area->fpu_sse.ftw =FXSAVE_FTW_RESET ; + xsave_area->fpu_sse.mxcsr =MXCSR_DEFAULT ; + xsave_area->fpu_sse.fcw =FCW_RESET ; + xsave_area->fpu_sse.ftw =FXSAVE_FTW_RESET ; + +VCPU_UNMAP_XSAVE_AREA (v, xsave_area); }void vcpu_setup_fpu (struct vcpu *v,const void *data) { +struct xsave_struct *xsave_area =VCPU_MAP_XSAVE_AREA (v); + v->fpu_initialised = true; - *v->arch.xsave_area = (struct xsave_struct ) { + *xsave_area = (struct xsave_struct ) { .fpu_sse = *(const fpusse_t *)data, .xsave_hdr.xstate_bv =XSTATE_FP_SSE , }; + +VCPU_UNMAP_XSAVE_AREA (v, xsave_area); }/* Free FPU's context save area */
Signature · 1 line
2.47.1
PATCH v3 4/12 x86/xstate: Map/unmap xsave area in xstate_set_init() and handle_setbv()
In reply to Alejandro VallejoNo functional change.
---v2->v3:
* style: Capitalized first letter of the comment.
* Added A-by
v1->v2:
* Added comment highlighting fastpath for current
--- xen/arch/x86/xstate.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)
xen/arch/x86/xstate.c +10 -2
@@ -993,7 +993,13 @@ int handle_xsetbv(u32 index, u64 new_bv)clts ();if ( curr->fpu_dirtied ) - asm ("stmxcsr %0" :"=m" (curr->arch.xsave_area->fpu_sse.mxcsr) ); + { +/* Has a fastpath for `current`, so there's no actual map */ +struct xsave_struct *xsave_area =VCPU_MAP_XSAVE_AREA (curr); + + asm ("stmxcsr %0" :"=m" (xsave_area->fpu_sse.mxcsr) ); +VCPU_UNMAP_XSAVE_AREA (curr, xsave_area); + }else if (xstate_all (curr) ) {/* See the comment in i387.c:vcpu_restore_fpu_eager(). */
@@ -1048,7 +1054,7 @@ void xstate_set_init(uint64_t mask)unsigned long cr0 =read_cr0 ();unsigned long xcr0 =this_cpu (xcr0);struct vcpu *v = idle_vcpu[smp_processor_id ()]; -struct xsave_struct *xstate = v->arch.xsave_area; +struct xsave_struct *xstate;if ( ~xfeature_mask & mask ) {
@@ -1061,8 +1067,10 @@ void xstate_set_init(uint64_t mask)clts (); + xstate =VCPU_MAP_XSAVE_AREA (v);memset (&xstate->xsave_hdr,0 ,sizeof (xstate->xsave_hdr));xrstor (v, mask); +VCPU_UNMAP_XSAVE_AREA (v, xstate);if ( cr0 &X86_CR0_TS )write_cr0 (cr0);
Signature · 1 line
2.47.1
PATCH v3 5/12 x86/hvm: Map/unmap xsave area in hvmemul_{get,put}_fpu()
In reply to Alejandro VallejoNo functional change.
---v2->v3:
* style: Capitalized first letter of the fastpath comment
* Added A-by
v1->v2:
* Added comments highlighting fastpath for current
--- xen/arch/x86/hvm/emulate.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)
xen/arch/x86/hvm/emulate.c +10 -2
@@ -2371,7 +2371,9 @@ static int cf_check hvmemul_get_fpu(alternative_vcall (hvm_funcs.fpu_dirty_intercept); else if ( type == X86EMUL_FPU_fpu ) { -const fpusse_t *fpu_ctxt = &curr->arch.xsave_area->fpu_sse; +/* Has a fastpath for `current`, so there's no actual map */ +const struct xsave_struct *xsave_area =VCPU_MAP_XSAVE_AREA (curr); +const fpusse_t *fpu_ctxt = &xsave_area->fpu_sse;/* * Latch current register state so that we can back out changes
@@ -2397,6 +2399,8 @@ static int cf_check hvmemul_get_fpu(else ASSERT (fcw == fpu_ctxt->fcw); } + +VCPU_UNMAP_XSAVE_AREA (curr, xsave_area); }return X86EMUL_OKAY ;
@@ -2411,7 +2415,9 @@ static void cf_check hvmemul_put_fpu(if ( aux ) { -fpusse_t *fpu_ctxt = &curr->arch.xsave_area->fpu_sse; +/* Has a fastpath for `current`, so there's no actual map */ +struct xsave_struct *xsave_area =VCPU_MAP_XSAVE_AREA (curr); +fpusse_t *fpu_ctxt = &xsave_area->fpu_sse;bool dval = aux->dval;int mode =hvm_guest_x86_mode (curr);
@@ -2467,6 +2473,8 @@ static void cf_check hvmemul_put_fpu( fpu_ctxt->fop = aux->op; +VCPU_UNMAP_XSAVE_AREA (curr, xsave_area); +/* Re-use backout code below. */ backout = X86EMUL_FPU_fpu; }
Signature · 1 line
2.47.1
PATCH v3 6/12 x86/domctl: Map/unmap xsave area in arch_get_info_guest()
In reply to Alejandro VallejoNo functional change.
---v1->v2:
* Added A-by
v1->v2:
* No change
--- xen/arch/x86/domctl.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
xen/arch/x86/domctl.c +5 -4
@@ -1377,16 +1377,17 @@ void arch_get_info_guest(struct vcpu *v, vcpu_guest_context_u c)unsigned int i;const struct domain *d = v->domain;bool compat =is_pv_32bit_domain (d); +const struct xsave_struct *xsave_area;#ifdef CONFIG_COMPAT #define c (fld) (!compat ? (c.nat->fld) : (c.cmp->fld))#else #define c (fld) (c.nat->fld)#endif -BUILD_BUG_ON (sizeof (c.nat->fpu_ctxt) != -sizeof (v->arch.xsave_area->fpu_sse)); -memcpy (&c.nat->fpu_ctxt, &v->arch.xsave_area->fpu_sse, -sizeof (c.nat->fpu_ctxt)); + xsave_area =VCPU_MAP_XSAVE_AREA (v); +BUILD_BUG_ON (sizeof (c.nat->fpu_ctxt) !=sizeof (xsave_area->fpu_sse)); +memcpy (&c.nat->fpu_ctxt, &xsave_area->fpu_sse,sizeof (c.nat->fpu_ctxt)); +VCPU_UNMAP_XSAVE_AREA (v, xsave_area);if (is_pv_domain (d) )c (flags = v->arch.pv.vgc_flags & ~(VGCF_i387_valid|VGCF_in_kernel));
Signature · 1 line
2.47.1
PATCH v3 7/12 x86/xstate: Map/unmap xsave area in {compress,expand}_xsave_states()
In reply to Alejandro VallejoNo functional change.
---v2->v3:
* Unmap xsave area also before the early return.
v1->v2:
* No change
--- xen/arch/x86/xstate.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-)
xen/arch/x86/xstate.c +10 -4
@@ -177,7 +177,7 @@ static void setup_xstate_comp(uint16_t *comp_offsets,*/ void expand_xsave_states (const struct vcpu *v,void *dest,unsigned int size) { -const struct xsave_struct *xstate = v->arch.xsave_area; +const struct xsave_struct *xstate =VCPU_MAP_XSAVE_AREA (v);const void *src;uint16_t comp_offsets[sizeof (xfeature_mask)*8 ];u64 xstate_bv = xstate->xsave_hdr.xstate_bv;
@@ -191,7 +191,7 @@ void expand_xsave_states(const struct vcpu *v, void *dest, unsigned int size)if ( !(xstate->xsave_hdr.xcomp_bv &XSTATE_COMPACTION_ENABLED ) ) {memcpy (dest, xstate, size); -return ; + goto out; }ASSERT (xsave_area_compressed (xstate));
@@ -228,6 +228,9 @@ void expand_xsave_states(const struct vcpu *v, void *dest, unsigned int size) valid &= ~feature; } + + out: +VCPU_UNMAP_XSAVE_AREA (v, xstate); }/*
@@ -242,7 +245,7 @@ void expand_xsave_states(const struct vcpu *v, void *dest, unsigned int size)*/ void compress_xsave_states (struct vcpu *v,const void *src,unsigned int size) { -struct xsave_struct *xstate = v->arch.xsave_area; +struct xsave_struct *xstate =VCPU_MAP_XSAVE_AREA (v);void *dest;uint16_t comp_offsets[sizeof (xfeature_mask)*8 ];u64 xstate_bv, valid;
@@ -256,7 +259,7 @@ void compress_xsave_states(struct vcpu *v, const void *src, unsigned int size)if ( !(v->arch.xcr0_accum &XSTATE_XSAVES_ONLY ) ) {memcpy (xstate, src, size); -return ; + goto out; }/*
@@ -294,6 +297,9 @@ void compress_xsave_states(struct vcpu *v, const void *src, unsigned int size) valid &= ~feature; } + + out: +VCPU_UNMAP_XSAVE_AREA (v, xstate); }void xsave (struct vcpu *v,uint64_t mask)
Signature · 1 line
2.47.1
PATCH v3 8/12 x86/emulator: Refactor FXSAVE_AREA to use wrappers
In reply to Alejandro VallejoAdds an UNMAP primitive to make use of vcpu_unmap_xsave_area() when linked into xen. unmap is a no-op during tests.
---v2->v3:
* Fixed typo in first parameter of UNMAP_FXSAVE_AREA.
* Added Parenthesis around "x" in #else's UNMAP_FXSAVE_AREA(x)
v1->v2:
* Added comments highlighting fastpath on current
--- xen/arch/x86/x86_emulate/blk.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)
xen/arch/x86/x86_emulate/blk.c +10 -1
@@ -11,9 +11,12 @@ !defined(X86EMUL_NO_SIMD)# ifdef __XEN__# include <asm/xstate.h> -# define FXSAVE_AREA ((void *)¤t->arch.xsave_area->fpu_sse) +/* Has a fastpath for `current`, so there's no actual map */ +# define FXSAVE_AREA ((void *)VCPU_MAP_XSAVE_AREA(current)) +# define UNMAP_FXSAVE_AREA (x) VCPU_UNMAP_XSAVE_AREA(current, x)# else # define FXSAVE_AREA get_fpu_save_area() +# define UNMAP_FXSAVE_AREA (x) ((void)(x))# endif #endif
@@ -292,6 +295,9 @@ int x86_emul_blk( }else asmvolatile ("fxrstor %0" ::"m" (*fxsr) ); + +UNMAP_FXSAVE_AREA (fxsr); +break ; }
@@ -320,6 +326,9 @@ int x86_emul_blk(if ( fxsr != ptr )/* i.e. s->op_bytes < sizeof(*fxsr) */ memcpy (ptr, fxsr, s->op_bytes); + +UNMAP_FXSAVE_AREA (fxsr); +break ; }
Signature · 1 line
2.47.1
PATCH v3 9/12 x86/mpx: Map/unmap xsave area in in read_bndcfgu()
In reply to Alejandro VallejoNo functional change.
---v2->v3:
* No change
v1->v2:
* s/ret/bndcfgu
--- xen/arch/x86/xstate.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)
xen/arch/x86/xstate.c +9 -3
@@ -1024,9 +1024,10 @@ int handle_xsetbv(u32 index, u64 new_bv)uint64_t read_bndcfgu (void ) { +uint64_t bndcfgu =0 ;unsigned long cr0 =read_cr0 (); -struct xsave_struct *xstate - = idle_vcpu[smp_processor_id ()]->arch.xsave_area; +struct vcpu *v = idle_vcpu[smp_processor_id ()]; +struct xsave_struct *xstate =VCPU_MAP_XSAVE_AREA (v);const struct xstate_bndcsr *bndcsr;ASSERT (cpu_has_mpx);
@@ -1052,7 +1053,12 @@ uint64_t read_bndcfgu(void)if ( cr0 &X86_CR0_TS )write_cr0 (cr0); -return xstate->xsave_hdr.xstate_bv &X86_XCR0_BNDCSR ? bndcsr->bndcfgu :0 ; +if ( xstate->xsave_hdr.xstate_bv &X86_XCR0_BNDCSR ) + bndcfgu = bndcsr->bndcfgu; + +VCPU_UNMAP_XSAVE_AREA (v, xstate); + +return bndcfgu; }void xstate_set_init (uint64_t mask)
Signature · 1 line
2.47.1
PATCH v3 10/12 x86/fpu: Pass explicit xsave areas to fpu_(f)xsave()
In reply to Alejandro VallejoNo functional change.
---v2->v3:
* const-ified v in fpu_fxsave() (missing in v2)
v1->v2:
* const-ified v
--- xen/arch/x86/i387.c | 16 ++++++++++------ xen/arch/x86/include/asm/xstate.h | 2 +- xen/arch/x86/xstate.c | 3 +-- 3 files changed, 12 insertions(+), 9 deletions(-)
xen/arch/x86/i387.c +10 -6
@@ -129,7 +129,7 @@ static inline uint64_t vcpu_xsave_mask(const struct vcpu *v) }/* Save x87 extended state */ -static inline void fpu_xsave (struct vcpu *v) +static inline void fpu_xsave (const struct vcpu *v,struct xsave_struct *xsave_area) {bool ok;uint64_t mask =vcpu_xsave_mask (v);
@@ -141,15 +141,14 @@ static inline void fpu_xsave(struct vcpu *v)*/ ok =set_xcr0 (v->arch.xcr0_accum |XSTATE_FP_SSE );ASSERT (ok); -xsave (v, mask); +xsave (v, xsave_area, mask); ok =set_xcr0 (v->arch.xcr0 ?:XSTATE_FP_SSE );ASSERT (ok); }/* Save x87 FPU, MMX, SSE and SSE2 state */ -static inline void fpu_fxsave (struct vcpu *v) +static inline void fpu_fxsave (const struct vcpu *v,fpusse_t *fpu_ctxt) { -fpusse_t *fpu_ctxt = &v->arch.xsave_area->fpu_sse;unsigned int fip_width = v->domain->arch.x87_fip_width;if ( fip_width !=4 )
@@ -264,6 +263,8 @@ void vcpu_restore_fpu_lazy(struct vcpu *v)*/ static bool _vcpu_save_fpu (struct vcpu *v) { +struct xsave_struct *xsave_area; +if ( !v->fpu_dirtied && !v->arch.nonlazy_xstate_used )return false;
@@ -272,11 +273,14 @@ static bool _vcpu_save_fpu(struct vcpu *v)/* This can happen, if a paravirtualised guest OS has set its CR0.TS. */ clts (); + xsave_area =VCPU_MAP_XSAVE_AREA (v); +if ( cpu_has_xsave ) -fpu_xsave (v); +fpu_xsave (v, xsave_area);else -fpu_fxsave (v); +fpu_fxsave (v, &xsave_area->fpu_sse); +VCPU_UNMAP_XSAVE_AREA (v, xsave_area); v->fpu_dirtied =0 ;return true;
xen/arch/x86/include/asm/xstate.h +1 -1
@@ -97,7 +97,7 @@ uint64_t get_xcr0(void);void set_msr_xss (u64 xss);uint64_t get_msr_xss (void );uint64_t read_bndcfgu (void ); -void xsave (struct vcpu *v,uint64_t mask); +void xsave (const struct vcpu *v,struct xsave_struct *ptr,uint64_t mask);void xrstor (struct vcpu *v,uint64_t mask);void xstate_set_init (uint64_t mask);bool xsave_enabled (const struct vcpu *v);
xen/arch/x86/xstate.c +1 -2
@@ -302,9 +302,8 @@ void compress_xsave_states(struct vcpu *v, const void *src, unsigned int size)VCPU_UNMAP_XSAVE_AREA (v, xstate); } -void xsave (struct vcpu *v,uint64_t mask) +void xsave (const struct vcpu *v,struct xsave_struct *ptr,uint64_t mask) { -struct xsave_struct *ptr = v->arch.xsave_area;uint32_t hmask = mask >>32 ;uint32_t lmask = mask;unsigned int fip_width = v->domain->arch.x87_fip_width;
Signature · 1 line
2.47.1
PATCH v3 12/12 x86/xstate: Make xstate_all() and vcpu_xsave_mask() take explicit xstate
In reply to Alejandro VallejoNo functional change.
---v2->v3:
* Added A-by
--- xen/arch/x86/i387.c | 9 +++++---- xen/arch/x86/include/asm/xstate.h | 5 +++-- xen/arch/x86/xstate.c | 2 +- 3 files changed, 9 insertions(+), 7 deletions(-)
xen/arch/x86/i387.c +5 -4
@@ -107,7 +107,8 @@ static inline void fpu_fxrstor(const fpusse_t *fpu_ctxt)/* FPU Save Functions */ /*******************************/ -static inline uint64_t vcpu_xsave_mask (const struct vcpu *v) +static inline uint64_t vcpu_xsave_mask (const struct vcpu *v, +const struct xsave_struct *xsave_area) {if ( v->fpu_dirtied )return v->arch.nonlazy_xstate_used ?XSTATE_ALL :XSTATE_LAZY ;
@@ -124,14 +125,14 @@ static inline uint64_t vcpu_xsave_mask(const struct vcpu *v)* XSTATE_FP_SSE), vcpu_xsave_mask will return XSTATE_ALL. Otherwise * return XSTATE_NONLAZY. */ -return xstate_all (v) ?XSTATE_ALL :XSTATE_NONLAZY ; +return xstate_all (v, xsave_area) ?XSTATE_ALL :XSTATE_NONLAZY ; }/* Save x87 extended state */ static inline void fpu_xsave (const struct vcpu *v,struct xsave_struct *xsave_area) {bool ok; -uint64_t mask =vcpu_xsave_mask (v); +uint64_t mask =vcpu_xsave_mask (v, xsave_area);ASSERT (mask);/*
@@ -211,7 +212,7 @@ void vcpu_restore_fpu_nonlazy(struct vcpu *v, bool need_stts)* saving state belonging to another vCPU. */ xsave_area =VCPU_MAP_XSAVE_AREA (v); -if ( v->arch.fully_eager_fpu ||xstate_all (v) ) +if ( v->arch.fully_eager_fpu ||xstate_all (v, xsave_area) ) {if ( cpu_has_xsave )fpu_xrstor (v, xsave_area,XSTATE_ALL );
xen/arch/x86/include/asm/xstate.h +3 -2
@@ -132,14 +132,15 @@ xsave_area_compressed(const struct xsave_struct *xsave_area)return xsave_area->xsave_hdr.xcomp_bv &XSTATE_COMPACTION_ENABLED ; } -static inline bool xstate_all (const struct vcpu *v) +static inline bool xstate_all (const struct vcpu *v, +const struct xsave_struct *xsave_area) {/* * XSTATE_FP_SSE may be excluded, because the offsets of XSTATE_FP_SSE * (in the legacy region of xsave area) are fixed, so saving * XSTATE_FP_SSE will not cause overwriting problem with XSAVES/XSAVEC. */ -return xsave_area_compressed (v->arch.xsave_area) && +return xsave_area_compressed (xsave_area) && (v->arch.xcr0_accum &XSTATE_LAZY & ~XSTATE_FP_SSE ); }
xen/arch/x86/xstate.c +1 -1
@@ -1005,7 +1005,7 @@ int handle_xsetbv(u32 index, u64 new_bv) asm ("stmxcsr %0" :"=m" (xsave_area->fpu_sse.mxcsr) );VCPU_UNMAP_XSAVE_AREA (curr, xsave_area); } -else if (xstate_all (curr) ) +else if (xstate_all (curr, xsave_area) ) {/* See the comment in i387.c:vcpu_restore_fpu_eager(). */ mask |=XSTATE_LAZY ;
Signature · 1 line
2.47.1
PATCH v3 11/12 x86/fpu: Pass explicit xsave areas to fpu_(f)xrstor()
In reply to Alejandro VallejoNo functional change.
---v2->v3:
* const-ified v in fpu_xrstor()
* Removed v in fpu_fxrstor()
v1->v2:
* const-ified v in xrstor()
( it was incorrectly reported in v2 as it being fpu_xrstor() )
--- xen/arch/x86/i387.c | 26 ++++++++++++++++---------- xen/arch/x86/include/asm/xstate.h | 2 +- xen/arch/x86/xstate.c | 10 ++++++---- 3 files changed, 23 insertions(+), 15 deletions(-)
xen/arch/x86/i387.c +16 -10
@@ -20,7 +20,8 @@/* FPU Restore Functions */ /*******************************/ /* Restore x87 extended state */ -static inline void fpu_xrstor (struct vcpu *v,uint64_t mask) +static inline void fpu_xrstor (const struct vcpu *v, +struct xsave_struct *xsave_area,uint64_t mask) {bool ok;
@@ -30,16 +31,14 @@ static inline void fpu_xrstor(struct vcpu *v, uint64_t mask)*/ ok =set_xcr0 (v->arch.xcr0_accum |XSTATE_FP_SSE );ASSERT (ok); -xrstor (v, mask); +xrstor (v, xsave_area, mask); ok =set_xcr0 (v->arch.xcr0 ?:XSTATE_FP_SSE );ASSERT (ok); }/* Restore x87 FPU, MMX, SSE and SSE2 state */ -static inline void fpu_fxrstor (struct vcpu *v) +static inline void fpu_fxrstor (const fpusse_t *fpu_ctxt) { -const fpusse_t *fpu_ctxt = &v->arch.xsave_area->fpu_sse; -/* * Some CPUs don't save/restore FDP/FIP/FOP unless an exception * is pending. Clear the x87 state here by setting it to fixed
@@ -195,6 +194,8 @@ static inline void fpu_fxsave(const struct vcpu *v, fpusse_t *fpu_ctxt)/* Restore FPU state whenever VCPU is schduled in. */ void vcpu_restore_fpu_nonlazy (struct vcpu *v,bool need_stts) { +struct xsave_struct *xsave_area; +/* Restore nonlazy extended state (i.e. parts not tracked by CR0.TS). */ if ( !v->arch.fully_eager_fpu && !v->arch.nonlazy_xstate_used ) goto maybe_stts;
@@ -209,12 +210,13 @@ void vcpu_restore_fpu_nonlazy(struct vcpu *v, bool need_stts)* above) we also need to restore full state, to prevent subsequently * saving state belonging to another vCPU. */ + xsave_area =VCPU_MAP_XSAVE_AREA (v);if ( v->arch.fully_eager_fpu ||xstate_all (v) ) {if ( cpu_has_xsave ) -fpu_xrstor (v,XSTATE_ALL ); +fpu_xrstor (v, xsave_area,XSTATE_ALL );else -fpu_fxrstor (v); +fpu_fxrstor (&xsave_area->fpu_sse); v->fpu_initialised =1 ; v->fpu_dirtied =1 ;
@@ -224,9 +226,10 @@ void vcpu_restore_fpu_nonlazy(struct vcpu *v, bool need_stts) }else { -fpu_xrstor (v,XSTATE_NONLAZY ); +fpu_xrstor (v, xsave_area,XSTATE_NONLAZY ); need_stts = true; } +VCPU_UNMAP_XSAVE_AREA (v, xsave_area); maybe_stts:if ( need_stts )
@@ -238,6 +241,7 @@ void vcpu_restore_fpu_nonlazy(struct vcpu *v, bool need_stts)*/ void vcpu_restore_fpu_lazy (struct vcpu *v) { +struct xsave_struct *xsave_area;ASSERT (!is_idle_vcpu (v));/* Avoid recursion. */
@@ -248,10 +252,12 @@ void vcpu_restore_fpu_lazy(struct vcpu *v)ASSERT (!v->arch.fully_eager_fpu); + xsave_area =VCPU_MAP_XSAVE_AREA (v);if ( cpu_has_xsave ) -fpu_xrstor (v,XSTATE_LAZY ); +fpu_xrstor (v, xsave_area,XSTATE_LAZY );else -fpu_fxrstor (v); +fpu_fxrstor (&xsave_area->fpu_sse); +VCPU_UNMAP_XSAVE_AREA (v, xsave_area); v->fpu_initialised =1 ; v->fpu_dirtied =1 ;
xen/arch/x86/include/asm/xstate.h +1 -1
@@ -98,7 +98,7 @@ void set_msr_xss(u64 xss);uint64_t get_msr_xss (void );uint64_t read_bndcfgu (void );void xsave (const struct vcpu *v,struct xsave_struct *ptr,uint64_t mask); -void xrstor (struct vcpu *v,uint64_t mask); +void xrstor (const struct vcpu *v,struct xsave_struct *ptr,uint64_t mask);void xstate_set_init (uint64_t mask);bool xsave_enabled (const struct vcpu *v); int __must_check validate_xstate(const struct domain *d,
xen/arch/x86/xstate.c +6 -4
@@ -376,11 +376,10 @@ void xsave(const struct vcpu *v, struct xsave_struct *ptr, uint64_t mask) ptr->fpu_sse.x[FPU_WORD_SIZE_OFFSET ] = fip_width; } -void xrstor (struct vcpu *v,uint64_t mask) +void xrstor (const struct vcpu *v,struct xsave_struct *ptr,uint64_t mask) {uint32_t hmask = mask >>32 ;uint32_t lmask = mask; -struct xsave_struct *ptr = v->arch.xsave_area;unsigned int faults, prev_faults;/*
@@ -994,6 +993,7 @@ int handle_xsetbv(u32 index, u64 new_bv) mask &= curr->fpu_dirtied ? ~XSTATE_FP_SSE :XSTATE_NONLAZY ;if ( mask ) { +struct xsave_struct *xsave_area =VCPU_MAP_XSAVE_AREA (curr);unsigned long cr0 =read_cr0 ();clts ();
@@ -1013,7 +1013,9 @@ int handle_xsetbv(u32 index, u64 new_bv) curr->fpu_dirtied =1 ; cr0 &= ~X86_CR0_TS ; } -xrstor (curr, mask); +xrstor (curr, xsave_area, mask); +VCPU_UNMAP_XSAVE_AREA (curr, xsave_area); +if ( cr0 &X86_CR0_TS )write_cr0 (cr0); }
@@ -1080,7 +1082,7 @@ void xstate_set_init(uint64_t mask) xstate =VCPU_MAP_XSAVE_AREA (v);memset (&xstate->xsave_hdr,0 ,sizeof (xstate->xsave_hdr)); -xrstor (v, mask); +xrstor (v, xstate, mask);VCPU_UNMAP_XSAVE_AREA (v, xstate);if ( cr0 &X86_CR0_TS )
Signature · 1 line
2.47.1
Re: [PATCH v3 01/12] x86/xstate: Create map/unmap primitives for xsave areas
In reply to Alejandro VallejoQuoted 12 lines · Alejandro Vallejo
Add infrastructure to simplify ASI handling. With ASI in the picture we'll have several different means of accessing the XSAVE area of a given vCPU, depending on whether a domain is covered by ASI or not and whether the vCPU is question is scheduled on the current pCPU or not.
Having these complexities exposed at the call sites becomes unwieldy very fast. These wrappers are intended to be used in a similar way to
map_domain_page()andunmap_domain_page(); The map operation will dispatch the appropriate pointer for each case in a future patch, while unmap will remain a no-op where no unmap is required (e.g: when there's no ASI) and remove the transient maping if one was required.
Quoted 5 lines
Follow-up patches replace all uses of raw
v->arch.xsave_areaby this mechanism in preparation to add the beforementioned dispatch logic to be added at a later time.Signed-off-by Alejandro Vallejo <[email protected]>
with one nit below.
Quoted 37 lines
xen/arch/x86/include/asm/xstate.h +31
-0@@ -143,4 +143,46 @@ static inline bool xstate_all(const struct vcpu *v) (v->arch.xcr0_accum &XSTATE_LAZY & ~XSTATE_FP_SSE ); } +/* +* Fetch a pointer to a vCPU's XSAVE area +* +* TL;DR: If v == current, the mapping is guaranteed to already exist. +* +* Despite the name, this macro might not actually map anything. The only case +* in which a mutation of page tables is strictly required is when ASI==on && +* v!=current. For everything else the mapping already exists and needs not +* be created nor destroyed. +* +* +-----------------+--------------+ +* | v == current | v != current | +* +--------------+-----------------+--------------+ +* | ASI enabled | per-vCPU fixmap | actual map | +* +--------------+-----------------+--------------+ +* | ASI disabled | directmap | +* +--------------+--------------------------------+ +* +* There MUST NOT be outstanding maps of XSAVE areas of the non-current vCPU +* at the point of context switch. Otherwise, the unmap operation will +* misbehave. +* +* TODO: Expand the macro to the ASI cases after infra to do so is in place. +* +* @param v Owner of the XSAVE area +*/ +#define VCPU_MAP_XSAVE_AREA (v) ((v)->arch.xsave_area) + +/* +* Drops the mapping of a vCPU's XSAVE area and nullifies its pointer on exit +*
xen/arch/x86/include/asm/xstate.h static inline bool xstate_all(const struct vcpu *v) · line 186
Quoted 10 lines
xen/arch/x86/include/asm/xstate.h +10
-0+* See VCPU_MAP_XSAVE_AREA() for additional information on the persistence of +* these mappings. This macro only tears down the mappings in the ASI=on && +* v!=current case. +* +* TODO: Expand the macro to the ASI cases after infra to do so is in place. +* +* @param v Owner of the XSAVE area +* @param x XSAVE blob of v +*/ +#define VCPU_UNMAP_XSAVE_AREA (v, x) do { (void)(v); (x) = NULL; } while(0)
The "while" still wants to conform to style, despite it being a kind of degenerate form. The overwhelming majority of instances we've got have at least a blank before the opening parenthesis. Many also have the ones inside.
Jan
Re: [PATCH v3 07/12] x86/xstate: Map/unmap xsave area in {compress,expand}_xsave_states()
In reply to Alejandro VallejoQuoted 3 lines · Alejandro Vallejo
No functional change.
Signed-off-by Alejandro Vallejo <[email protected]>
Re: [PATCH v3 08/12] x86/emulator: Refactor FXSAVE_AREA to use wrappers
In reply to Alejandro VallejoQuoted 4 lines · Alejandro Vallejo
Adds an UNMAP primitive to make use of
vcpu_unmap_xsave_area()when linked into xen. unmap is a no-op during tests.Signed-off-by Alejandro Vallejo <[email protected]>
despite ...
xen/arch/x86/x86_emulate/blk.c line 16
Quoted 10 lines
xen/arch/x86/x86_emulate/blk.c +3
-1@@ -11,9 +11,12 @@ !defined(X86EMUL_NO_SIMD)# ifdef __XEN__# include <asm/xstate.h> -# define FXSAVE_AREA ((void *)¤t->arch.xsave_area->fpu_sse) +/* Has a fastpath for `current`, so there's no actual map */ +# define FXSAVE_AREA ((void *)VCPU_MAP_XSAVE_AREA(current)) +# define UNMAP_FXSAVE_AREA (x) VCPU_UNMAP_XSAVE_AREA(current, x)
... the comment here kind of suggesting that ...
xen/arch/x86/x86_emulate/blk.c line 19
Quoted 3 lines
xen/arch/x86/x86_emulate/blk.c +1
-0# else # define FXSAVE_AREA get_fpu_save_area() +# define UNMAP_FXSAVE_AREA (x) ((void)(x))
... use of this new construct is solely decoration, and could hence as well be omitted.
Jan
Re: [PATCH v3 09/12] x86/mpx: Map/unmap xsave area in in read_bndcfgu()
In reply to Alejandro Vallejoxen/arch/x86/xstate.c int handle_xsetbv(u32 index, u64 new_bv) · line 1029
Quoted 11 lines · Alejandro Vallejo
xen/arch/x86/xstate.c +2
-2@@ -1024,9 +1024,10 @@ int handle_xsetbv(u32 index, u64 new_bv)uint64_t read_bndcfgu (void ) { +uint64_t bndcfgu =0 ;unsigned long cr0 =read_cr0 (); -struct xsave_struct *xstate - = idle_vcpu[smp_processor_id ()]->arch.xsave_area; +struct vcpu *v = idle_vcpu[smp_processor_id ()];
Question on this one remains: Can it be pointer-to-const (in the longer run; certainly in can be right now)?
xen/arch/x86/xstate.c int handle_xsetbv(u32 index, u64 new_bv) · line 1030
Quoted 1 line
xen/arch/x86/xstate.c +1
-0+struct xsave_struct *xstate =VCPU_MAP_XSAVE_AREA (v);
I realize my similar remark on this one was actually wrong; the asm()s clearly modify what is being pointed top.
Jan
Re: [PATCH v3 10/12] x86/fpu: Pass explicit xsave areas to fpu_(f)xsave()
In reply to Alejandro VallejoQuoted 6 lines · Alejandro Vallejo
No functional change.
Signed-off-by Alejandro Vallejo <[email protected]>---
v2->v3:
* const-ified v infpu_fxsave()(missing in v2)
Sadly this has rendered ...
xen/arch/x86/i387.c static inline uint64_t vcpu_xsave_mask(const struct vcpu *v) · line 132
Quoted 8 lines
xen/arch/x86/i387.c +1
-1@@ -129,7 +129,7 @@ static inline uint64_t vcpu_xsave_mask(const struct vcpu *v) }/* Save x87 extended state */ -static inline void fpu_xsave (struct vcpu *v) +static inline void fpu_xsave (const struct vcpu *v,struct xsave_struct *xsave_area)
... this line too long now. With it suitably wrapped (possibly doable while committing, if no other reason for a v4 appears)
Jan
Re: [PATCH v3 11/12] x86/fpu: Pass explicit xsave areas to fpu_(f)xrstor()
In reply to Alejandro VallejoQuoted 3 lines · Alejandro Vallejo
No functional change.
Signed-off-by Alejandro Vallejo <[email protected]>
Quoted 4 lines
---
v2->v3:
* const-ified v infpu_xrstor()
* Removed v infpu_fxrstor()
On this basis the parameter could also be removed from fpu_fxsave(), by passing in fip_width instead.
Jan
Re: [PATCH v3 09/12] x86/mpx: Map/unmap xsave area in in read_bndcfgu()
In reply to Jan BeulichHi,
Thanks for reviewing this and the other patches.
Quoted 5 lines · Jan Beulich
Quoted 4 lines · Alejandro Vallejo
xen/arch/x86/xstate.c +0
-0@@ -1024,9 +1024,10 @@ int handle_xsetbv(u32 index, u64 new_bv)
Quoted 10 lines
xen/arch/x86/xstate.c int handle_xsetbv(u32 index, u64 new_bv) · line 1029
Quoted 7 lines
xen/arch/x86/xstate.c +2
-2uint64_t read_bndcfgu (void ) { +uint64_t bndcfgu =0 ;unsigned long cr0 =read_cr0 (); -struct xsave_struct *xstate - = idle_vcpu[smp_processor_id ()]->arch.xsave_area; +struct vcpu *v = idle_vcpu[smp_processor_id ()];Question on this one remains: Can it be pointer-to-const (in the longer run; certainly in can be right now)?
I have no idea where I got the idea the C constness was transitive (quite likely from Rust, as its illegal to grab a &mut from a &). Const being non-transitive means I can constify the vcpu as you suggest/ask. The rationale was that getting a pointer to non-const from a pointer to const seemed wrong.
But C is bizarre and its finer details have a way of biting. Oh well.
FWIW, this ought to hold even in the long run. There won't be anything special in the map/unmap macros besides some indirection, so it'll work in a very similar fashion as it does now.
I'll adjust it as you propose.
Quoted 5 lines
xen/arch/x86/xstate.c int handle_xsetbv(u32 index, u64 new_bv) · line 1030
Quoted 2 lines
xen/arch/x86/xstate.c +1
-0+struct xsave_struct *xstate =VCPU_MAP_XSAVE_AREA (v);I realize my similar remark on this one was actually wrong; the asm()s clearly modify what is being pointed top.
Indeed, xstate can definitely not be const.
Quoted 1 line
Jan
Cheers,
Alejandro
Re: [PATCH v3 01/12] x86/xstate: Create map/unmap primitives for xsave areas
In reply to Jan BeulichHi,
Quoted 75 lines · Jan Beulich
Quoted 12 lines · Alejandro Vallejo
Add infrastructure to simplify ASI handling. With ASI in the picture we'll have several different means of accessing the XSAVE area of a given vCPU, depending on whether a domain is covered by ASI or not and whether the vCPU is question is scheduled on the current pCPU or not.
Having these complexities exposed at the call sites becomes unwieldy very fast. These wrappers are intended to be used in a similar way to
map_domain_page()andunmap_domain_page(); The map operation will dispatch the appropriate pointer for each case in a future patch, while unmap will remain a no-op where no unmap is required (e.g: when there's no ASI) and remove the transient maping if one was required.Quoted 5 lines
Follow-up patches replace all uses of raw
v->arch.xsave_areaby this mechanism in preparation to add the beforementioned dispatch logic to be added at a later time.Signed-off-by Alejandro Vallejo <[email protected]>Acked-by Jan Beulich <[email protected]>with one nit below.
Quoted 37 lines
xen/arch/x86/include/asm/xstate.h +31
-0@@ -143,4 +143,46 @@ static inline bool xstate_all(const struct vcpu *v) (v->arch.xcr0_accum &XSTATE_LAZY & ~XSTATE_FP_SSE ); } +/* +* Fetch a pointer to a vCPU's XSAVE area +* +* TL;DR: If v == current, the mapping is guaranteed to already exist. +* +* Despite the name, this macro might not actually map anything. The only case +* in which a mutation of page tables is strictly required is when ASI==on && +* v!=current. For everything else the mapping already exists and needs not +* be created nor destroyed. +* +* +-----------------+--------------+ +* | v == current | v != current | +* +--------------+-----------------+--------------+ +* | ASI enabled | per-vCPU fixmap | actual map | +* +--------------+-----------------+--------------+ +* | ASI disabled | directmap | +* +--------------+--------------------------------+ +* +* There MUST NOT be outstanding maps of XSAVE areas of the non-current vCPU +* at the point of context switch. Otherwise, the unmap operation will +* misbehave. +* +* TODO: Expand the macro to the ASI cases after infra to do so is in place. +* +* @param v Owner of the XSAVE area +*/ +#define VCPU_MAP_XSAVE_AREA (v) ((v)->arch.xsave_area) + +/* +* Drops the mapping of a vCPU's XSAVE area and nullifies its pointer on exit +* xen/arch/x86/include/asm/xstate.h static inline bool xstate_all(const struct vcpu *v) · line 186
Quoted 10 lines
xen/arch/x86/include/asm/xstate.h +10
-0+* See VCPU_MAP_XSAVE_AREA() for additional information on the persistence of +* these mappings. This macro only tears down the mappings in the ASI=on && +* v!=current case. +* +* TODO: Expand the macro to the ASI cases after infra to do so is in place. +* +* @param v Owner of the XSAVE area +* @param x XSAVE blob of v +*/ +#define VCPU_UNMAP_XSAVE_AREA (v, x) do { (void)(v); (x) = NULL; } while(0)The "while" still wants to conform to style, despite it being a kind of degenerate form. The overwhelming majority of instances we've got have at least a blank before the opening parenthesis. Many also have the ones inside.
Quoted 1 line
Jan
Sure, makes sense. I'll adjust it.
Cheers
Alejandro
Re: [PATCH v3 08/12] x86/emulator: Refactor FXSAVE_AREA to use wrappers
In reply to Jan BeulichQuoted 7 lines · Jan Beulich
Quoted 4 lines · Alejandro Vallejo
Adds an UNMAP primitive to make use of
vcpu_unmap_xsave_area()when linked into xen. unmap is a no-op during tests.Signed-off-by Alejandro Vallejo <[email protected]>Acked-by Jan Beulich <[email protected]>
Thanks,
Quoted 15 lines
despite ...
xen/arch/x86/x86_emulate/blk.c line 16
Quoted 10 lines
xen/arch/x86/x86_emulate/blk.c +3
-1@@ -11,9 +11,12 @@ !defined(X86EMUL_NO_SIMD)# ifdef __XEN__# include <asm/xstate.h> -# define FXSAVE_AREA ((void *)¤t->arch.xsave_area->fpu_sse) +/* Has a fastpath for `current`, so there's no actual map */ +# define FXSAVE_AREA ((void *)VCPU_MAP_XSAVE_AREA(current)) +# define UNMAP_FXSAVE_AREA (x) VCPU_UNMAP_XSAVE_AREA(current, x)... the comment here kind of suggesting that ...
Quoted 8 lines
xen/arch/x86/x86_emulate/blk.c line 19
Quoted 3 lines
xen/arch/x86/x86_emulate/blk.c +1
-0# else # define FXSAVE_AREA get_fpu_save_area() +# define UNMAP_FXSAVE_AREA (x) ((void)(x))... use of this new construct is solely decoration, and could hence as well be omitted.
Jan
It seems like a dangerous proposition to abuse knowledge of an implementation in order to skip parts of its interface. The fact that no such map is required at this point in x86_emulate does not mean it never will be. Predicting the future is hard, but being consistent today is less so (imo).
Cheers,
Alejandro
Re: [PATCH v3 10/12] x86/fpu: Pass explicit xsave areas to fpu_(f)xsave()
In reply to Jan BeulichQuoted 15 lines · Jan Beulich
Quoted 6 lines · Alejandro Vallejo
No functional change.
Signed-off-by Alejandro Vallejo <[email protected]>---
v2->v3:
* const-ified v infpu_fxsave()(missing in v2)Sadly this has rendered ...
Quoted 5 lines
xen/arch/x86/i387.c +0
-0@@ -129,7 +129,7 @@ static inline uint64_t vcpu_xsave_mask(const struct vcpu *v) }
Quoted 6 lines
xen/arch/x86/i387.c static inline uint64_t vcpu_xsave_mask(const struct vcpu *v) · line 132
Quoted 3 lines
xen/arch/x86/i387.c +1
-1/* Save x87 extended state */ -static inline void fpu_xsave (struct vcpu *v) +static inline void fpu_xsave (const struct vcpu *v,struct xsave_struct *xsave_area)... this line too long now. With it suitably wrapped (possibly doable while committing, if no other reason for a v4 appears)
Bah, yes. You're right. I don't mind it being adjusted on commit.
Quoted 3 lines
Acked-by Jan Beulich <[email protected]>Jan
Cheers,
Alejandro
Re: [PATCH v3 11/12] x86/fpu: Pass explicit xsave areas to fpu_(f)xrstor()
In reply to Jan BeulichHi,
Quoted 12 lines · Jan Beulich
Quoted 3 lines · Alejandro Vallejo
No functional change.
Signed-off-by Alejandro Vallejo <[email protected]>Acked-by Jan Beulich <[email protected]>Quoted 4 lines
---
v2->v3:
* const-ified v infpu_xrstor()
* Removed v infpu_fxrstor()
Quoted 4 lines
On this basis the parameter could also be removed from
fpu_fxsave(), by passing infip_widthinstead.Jan
Could be, but there's not a whole lot of gain to be had? The access must be done either way before or after the fpu_fxsave() call, and a parameter must be passed (be it fip_width or v). Passing the vCPU encapsulates the access of fip_width where its actually used, which seems more desirable, I'd say.
Cheers,
Alejandro
Re: [PATCH v3 08/12] x86/emulator: Refactor FXSAVE_AREA to use wrappers
In reply to Alejandro VallejoQuoted 30 lines · Alejandro Vallejo
Quoted 7 lines · Jan Beulich
Quoted 4 lines · Alejandro Vallejo
Adds an UNMAP primitive to make use of
vcpu_unmap_xsave_area()when linked into xen. unmap is a no-op during tests.Signed-off-by Alejandro Vallejo <[email protected]>Acked-by Jan Beulich <[email protected]>Thanks,
Quoted 19 lines
despite ...
xen/arch/x86/x86_emulate/blk.c line 16
Quoted 10 lines
xen/arch/x86/x86_emulate/blk.c +3
-1@@ -11,9 +11,12 @@ !defined(X86EMUL_NO_SIMD)# ifdef __XEN__# include <asm/xstate.h> -# define FXSAVE_AREA ((void *)¤t->arch.xsave_area->fpu_sse) +/* Has a fastpath for `current`, so there's no actual map */ +# define FXSAVE_AREA ((void *)VCPU_MAP_XSAVE_AREA(current)) +# define UNMAP_FXSAVE_AREA (x) VCPU_UNMAP_XSAVE_AREA(current, x)... the comment here kind of suggesting that ...
Quoted 3 lines
xen/arch/x86/x86_emulate/blk.c +1
-0# else # define FXSAVE_AREA get_fpu_save_area() +# define UNMAP_FXSAVE_AREA (x) ((void)(x))
Quoted 7 lines
Quoted 2 lines
... use of this new construct is solely decoration, and could hence as well be omitted.
It seems like a dangerous proposition to abuse knowledge of an implementation in order to skip parts of its interface. The fact that no such map is required at this point in
x86_emulatedoes not mean it never will be. Predicting the future is hard, but being consistent today is less so (imo).
Entirely true. How likely do you consider it though that with a future change altering that property, the comment above would be left in place (and hence then be stale)? My take: Very likely, as long as the two "current" uses wouldn't need altering.
Yet FTAOD: I'm not asking for any adjustment here, I'm merely mentioning an observation.
Jan
Re: [PATCH v3 11/12] x86/fpu: Pass explicit xsave areas to fpu_(f)xrstor()
In reply to Alejandro VallejoQuoted 13 lines · Alejandro Vallejo
Quoted 12 lines · Jan Beulich
Quoted 3 lines · Alejandro Vallejo
No functional change.
Signed-off-by Alejandro Vallejo <[email protected]>Acked-by Jan Beulich <[email protected]>Quoted 4 lines
---
v2->v3:
* const-ified v infpu_xrstor()
* Removed v infpu_fxrstor()
Quoted 7 lines
Quoted 2 lines
On this basis the parameter could also be removed from
fpu_fxsave(), by passing infip_widthinstead.Could be, but there's not a whole lot of gain to be had? The access must be done either way before or after the
fpu_fxsave()call, and a parameter must be passed (be itfip_widthor v). Passing the vCPU encapsulates the access offip_widthwhere its actually used, which seems more desirable, I'd say.
Not much of a gain indeed, largely for symmetry between the two sibling functions.
Jan
Re: [PATCH v3 08/12] x86/emulator: Refactor FXSAVE_AREA to use wrappers
In reply to Alejandro VallejoQuoted 5 lines · Alejandro Vallejo
xen/arch/x86/x86_emulate/blk.c +0
-0@@ -11,9 +11,12 @@ !defined(X86EMUL_NO_SIMD)# ifdef __XEN__
xen/arch/x86/x86_emulate/blk.c line 21
Quoted 10 lines
xen/arch/x86/x86_emulate/blk.c +4
-1# include <asm/xstate.h> -# define FXSAVE_AREA ((void *)¤t->arch.xsave_area->fpu_sse) +/* Has a fastpath for `current`, so there's no actual map */ +# define FXSAVE_AREA ((void *)VCPU_MAP_XSAVE_AREA(current)) +# define UNMAP_FXSAVE_AREA (x) VCPU_UNMAP_XSAVE_AREA(current, x)# else # define FXSAVE_AREA get_fpu_save_area() +# define UNMAP_FXSAVE_AREA (x) ((void)(x))# endif #endif
While preparing to commit this I felt a little uneasy. The mapping aspect is ...
Quoted 11 lines
xen/arch/x86/x86_emulate/blk.c +3
-0@@ -292,6 +295,9 @@ int x86_emul_blk( }else asmvolatile ("fxrstor %0" ::"m" (*fxsr) ); + +UNMAP_FXSAVE_AREA (fxsr); +break ; }
xen/arch/x86/x86_emulate/blk.c int x86_emul_blk( · line 334
Quoted 9 lines
xen/arch/x86/x86_emulate/blk.c +3
-0@@ -320,6 +326,9 @@ int x86_emul_blk(if ( fxsr != ptr )/* i.e. s->op_bytes < sizeof(*fxsr) */ memcpy (ptr, fxsr, s->op_bytes); + +UNMAP_FXSAVE_AREA (fxsr); +break ; }
... is entirely invisible at the use sites. This imo calls for making mistakes, and hence the existing macro better would be adjusted to become MAP_FXSAVE_AREA().
Jan
Re: [PATCH v3 08/12] x86/emulator: Refactor FXSAVE_AREA to use wrappers
Quoted 11 lines · Jan Beulich
Quoted 10 lines · Alejandro Vallejo
xen/arch/x86/x86_emulate/blk.c +3
-1@@ -11,9 +11,12 @@ !defined(X86EMUL_NO_SIMD)# ifdef __XEN__# include <asm/xstate.h> -# define FXSAVE_AREA ((void *)¤t->arch.xsave_area->fpu_sse) +/* Has a fastpath for `current`, so there's no actual map */ +# define FXSAVE_AREA ((void *)VCPU_MAP_XSAVE_AREA(current)) +# define UNMAP_FXSAVE_AREA (x) VCPU_UNMAP_XSAVE_AREA(current, x)
Quoted 8 lines
xen/arch/x86/x86_emulate/blk.c line 21
Quoted 5 lines
xen/arch/x86/x86_emulate/blk.c +1
-0# else # define FXSAVE_AREA get_fpu_save_area() +# define UNMAP_FXSAVE_AREA (x) ((void)(x))# endif #endif While preparing to commit this I felt a little uneasy. The mapping aspect is ...
Thanks for coming back to it :)
Quoted 26 lines
Quoted 12 lines
xen/arch/x86/x86_emulate/blk.c +3
-0@@ -292,6 +295,9 @@ int x86_emul_blk( }else asmvolatile ("fxrstor %0" ::"m" (*fxsr) ); + +UNMAP_FXSAVE_AREA (fxsr); +break ; }xen/arch/x86/x86_emulate/blk.c int x86_emul_blk( · line 334
Quoted 9 lines
xen/arch/x86/x86_emulate/blk.c +3
-0@@ -320,6 +326,9 @@ int x86_emul_blk(if ( fxsr != ptr )/* i.e. s->op_bytes < sizeof(*fxsr) */ memcpy (ptr, fxsr, s->op_bytes); + +UNMAP_FXSAVE_AREA (fxsr); +break ; }... is entirely invisible at the use sites. This imo calls for making mistakes, and hence the existing macro better would be adjusted to become
MAP_FXSAVE_AREA().
Quoted 1 line
Jan
I prefer it that way too; I was simply trying to minimize the diff. Would you like me to resend it with that adjustment?
Cheers,
Alejandro
Re: [PATCH v3 08/12] x86/emulator: Refactor FXSAVE_AREA to use wrappers
Quoted 49 lines · Alejandro Vallejo
Quoted 11 lines · Jan Beulich
Quoted 10 lines · Alejandro Vallejo
xen/arch/x86/x86_emulate/blk.c +3
-1@@ -11,9 +11,12 @@ !defined(X86EMUL_NO_SIMD)# ifdef __XEN__# include <asm/xstate.h> -# define FXSAVE_AREA ((void *)¤t->arch.xsave_area->fpu_sse) +/* Has a fastpath for `current`, so there's no actual map */ +# define FXSAVE_AREA ((void *)VCPU_MAP_XSAVE_AREA(current)) +# define UNMAP_FXSAVE_AREA (x) VCPU_UNMAP_XSAVE_AREA(current, x)Quoted 8 lines
xen/arch/x86/x86_emulate/blk.c line 21
Quoted 5 lines
xen/arch/x86/x86_emulate/blk.c +1
-0# else # define FXSAVE_AREA get_fpu_save_area() +# define UNMAP_FXSAVE_AREA (x) ((void)(x))# endif #endif While preparing to commit this I felt a little uneasy. The mapping aspect is ...
Thanks for coming back to it :)
Quoted 13 lines
Quoted 13 lines
xen/arch/x86/x86_emulate/blk.c +3
-0@@ -292,6 +295,9 @@ int x86_emul_blk( }else asmvolatile ("fxrstor %0" ::"m" (*fxsr) ); + +UNMAP_FXSAVE_AREA (fxsr); +break ; }@@ -320,6 +326,9 @@ int x86_emul_blk(Quoted 12 lines
xen/arch/x86/x86_emulate/blk.c int x86_emul_blk( · line 334
Quoted 8 lines
xen/arch/x86/x86_emulate/blk.c +3
-0if ( fxsr != ptr )/* i.e. s->op_bytes < sizeof(*fxsr) */ memcpy (ptr, fxsr, s->op_bytes); + +UNMAP_FXSAVE_AREA (fxsr); +break ; }... is entirely invisible at the use sites. This imo calls for making mistakes, and hence the existing macro better would be adjusted to become
MAP_FXSAVE_AREA().
Quoted 2 lines
I prefer it that way too; I was simply trying to minimize the diff. Would you like me to resend it with that adjustment?
Yes please. Plus whatever else adjustments are needed in the subsequent patches (sorry, it has been a while, so I don't recall the state of those later ones).
Jan