Skip to contentSkip to conversation

gdbstub: Allow late attachment

PATCH Superseded Ilya Leoshkevich 1 participant 9 messages Jan 10, 2025 Arm/Amlogic Meson SoC support

v5 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

v5 cover gdbstub: Allow late attachment

v4: https://lore.kernel.org/qemu-devel/[email protected]/
v4 -> v5: Fix the qemu-user-only build by adding qemu-sockets.c to it.
Drop the qapi_bool_parse() changes (Daniel).

v3: https://lore.kernel.org/qemu-devel/[email protected]/
v3 -> v4: Rebase.
Add missing "\n"s to error messages.
Use unix_listen() (Alex).
Use qapi_bool_parse() and patch it to accept NULL (Alex). Remove a leftover include (Alex).
Rename port_or_path to path, set it to NULL after freeing (Alex).

v2: https://lore.kernel.org/qemu-devel/[email protected]/
v2 -> v3: Rebase.
Patches that need review:
- [PATCH 2/8] gdbstub: Try unlinking the unix socket before binding
- [PATCH 4/8] user: Introduce host_interrupt_signal # linux part
- [PATCH 6/8] gdbstub: Allow late attachment
- [PATCH 7/8] docs/user: Document the %d placeholder and suspend=n QEMU_GDB features
- [PATCH 8/8] tests/tcg: Add late gdbstub attach test

v1: https://lore.kernel.org/qemu-devel/[email protected]/
v1 -> v2: Rebase, fix conflicts with the QEMU_RTSIG_MAP patch.
Use qemu_get_thread_id() for %d (Helge, Richard, Warner). Add R-bs, except for the Richard's one on 4/8, since conflict resolution caused a noticeable change.

Hi,

This series adds the ability to attach GDB to a running qemu-user instance. This is useful for debugging multi-process apps.

Patches 1 and 2 implement a small related feature: the ability to create individual UNIX sockets for each child process.

Patches 3-5 add the required infrastructure. In particular, we need to reserve a host signal for waking up threads, as discussed in [1]. By the way, the problem with atomicity of checking for pending signals and invoking syscalls that I'm describing in that thread seems to have already been solved by the safe_syscall infrastructure, so the changes are fairly simple.

If this series is accepted, I will rebase the all-stop series on top of it.

Patch 6 is the implementation, patch 7 is a documentation update, patch 8 is a test. I tested this series on Linux and only compile-tested on the BSDs.

Best regards,
Ilya

Ilya Leoshkevich (8):
gdbstub: Allow the %d placeholder in the socket path
gdbstub: Try unlinking the unix socket before binding
user: Introduce user/signal.h
user: Introduce host_interrupt_signal
osdep: Introduce qemu_kill_thread()
gdbstub: Allow late attachment
docs/user: Document the %d placeholder and suspend=n QEMU_GDB features tests/tcg: Add late gdbstub attach test

 bsd-user/main.c                            |   1 -
 bsd-user/signal-common.h                   |   1 -
 bsd-user/signal.c                          |  13 ++
 docs/user/main.rst                         |  16 ++-
 gdbstub/user.c                             | 154 +++++++++++++++++----
 include/qemu/osdep.h                       |   9 ++
 include/user/signal.h                      |  25 ++++
 linux-user/main.c                          |   1 -
 linux-user/signal-common.h                 |   1 -
 linux-user/signal.c                        |  26 +++-
 linux-user/syscall.c                       |   1 +
 stubs/meson.build                          |   2 +
 stubs/monitor-fd.c                         |   9 ++
 tests/guest-debug/run-test.py              |  15 +-
 tests/tcg/multiarch/Makefile.target        |   9 +-
 tests/tcg/multiarch/gdbstub/late-attach.py |  28 ++++
 tests/tcg/multiarch/late-attach.c          |  41 ++++++
 util/meson.build                           |   2 +
 util/oslib-posix.c                         |  15 ++
 19 files changed, 326 insertions(+), 43 deletions(-)
 create mode 100644 include/user/signal.h
 create mode 100644 stubs/monitor-fd.c
 create mode 100644 tests/tcg/multiarch/gdbstub/late-attach.py
 create mode 100644 tests/tcg/multiarch/late-attach.c
Signature · 1 line
2.47.1
#8 lore raw

PATCH v5 8/8 tests/tcg: Add late gdbstub attach test

Add a small test to prevent regressions.
Make sure that host_interrupt_signal is not visible to the guest.

---
 tests/guest-debug/run-test.py              | 15 ++++++--
 tests/tcg/multiarch/Makefile.target        |  9 ++++-
 tests/tcg/multiarch/gdbstub/late-attach.py | 28 +++++++++++++++
 tests/tcg/multiarch/late-attach.c          | 41 ++++++++++++++++++++++
 4 files changed, 90 insertions(+), 3 deletions(-)
 create mode 100644 tests/tcg/multiarch/gdbstub/late-attach.py
 create mode 100644 tests/tcg/multiarch/late-attach.c
tests/guest-debug/run-test.py +13 -2
index 5a091db8be9..75e9c92e036 100755
@@ -36,6 +36,8 @@ def get_args():
     parser.add_argument("--gdb-args", help="Additional gdb arguments")
     parser.add_argument("--output", help="A file to redirect output to")
     parser.add_argument("--stderr", help="A file to redirect stderr to")
+    parser.add_argument("--no-suspend", action="store_true",
+                        help="Ask the binary to not wait for GDB connection")
 
     return parser.parse_args()
 
@@ -73,10 +75,19 @@ def log(output, msg):
 
     # Launch QEMU with binary
     if "system" in args.qemu:
+        if args.no_suspend:
+            suspend = ''
+        else:
+            suspend = ' -S'
         cmd = f'{args.qemu} {args.qargs} {args.binary}' \
-            f' -S -gdb unix:path={socket_name},server=on'
+            f'{suspend} -gdb unix:path={socket_name},server=on'
     else:
-        cmd = f'{args.qemu} {args.qargs} -g {socket_name} {args.binary}'
+        if args.no_suspend:
+            suspend = ',suspend=n'
+        else:
+            suspend = ''
+        cmd = f'{args.qemu} {args.qargs} -g {socket_name}{suspend}' \
+            f' {args.binary}'
 
     log(output, "QEMU CMD: %s" % (cmd))
     inferior = subprocess.Popen(shlex.split(cmd))
tests/tcg/multiarch/Makefile.target +8 -1
index 18d3cf4ae00..688a6be203c 100644
@@ -130,6 +130,13 @@ run-gdbstub-follow-fork-mode-parent: follow-fork-mode
 		--bin $< --test $(MULTIARCH_SRC)/gdbstub/follow-fork-mode-parent.py, \
 	following parents on fork)
 
+run-gdbstub-late-attach: late-attach
+	$(call run-test, $@, env LATE_ATTACH_PY=1 $(GDB_SCRIPT) \
+		--gdb $(GDB) \
+		--qemu $(QEMU) --qargs "$(QEMU_OPTS)" --no-suspend \
+		--bin $< --test $(MULTIARCH_SRC)/gdbstub/late-attach.py, \
+	attaching to a running process)
+
 else
 run-gdbstub-%:
 	$(call skip-test, "gdbstub test $*", "need working gdb with $(patsubst -%,,$(TARGET_NAME)) support")
@@ -139,7 +146,7 @@ EXTRA_RUNS += run-gdbstub-sha1 run-gdbstub-qxfer-auxv-read \
 	      run-gdbstub-registers run-gdbstub-prot-none \
 	      run-gdbstub-catch-syscalls run-gdbstub-follow-fork-mode-child \
 	      run-gdbstub-follow-fork-mode-parent \
-	      run-gdbstub-qxfer-siginfo-read
+	      run-gdbstub-qxfer-siginfo-read run-gdbstub-late-attach
 
 # ARM Compatible Semi Hosting Tests
 #
tests/tcg/multiarch/gdbstub/late-attach.py new file +28 -0
new file mode 100644
index 00000000000..1d40efb5ec8
@@ -0,0 +1,28 @@
+"""Test attaching GDB to a running process.
+
+SPDX-License-Identifier: GPL-2.0-or-later
+"""
+from test_gdbstub import main, report
+
+
+def run_test():
+    """Run through the tests one by one"""
+    try:
+        phase = gdb.parse_and_eval("phase").string()
+    except gdb.error:
+        # Assume the guest did not reach main().
+        phase = "start"
+
+    if phase == "start":
+        gdb.execute("break sigwait")
+        gdb.execute("continue")
+        phase = gdb.parse_and_eval("phase").string()
+    report(phase == "sigwait", "{} == \"sigwait\"".format(phase))
+
+    gdb.execute("signal SIGUSR1")
+
+    exitcode = int(gdb.parse_and_eval("$_exitcode"))
+    report(exitcode == 0, "{} == 0".format(exitcode))
+
+
+main(run_test)
tests/tcg/multiarch/late-attach.c new file +41 -0

41 lines not on this page · raw message

Signature · 1 line
2.47.1
#3 lore raw

PATCH v5 3/8 user: Introduce user/signal.h

In reply to Ilya Leoshkevich

gdbstub needs target_to_host_signal(), so move its declaration to a public header.

---
 bsd-user/signal-common.h   |  1 -
 bsd-user/signal.c          |  1 +
 include/user/signal.h      | 23 +++++++++++++++++++++++
 linux-user/signal-common.h |  1 -
 linux-user/signal.c        |  1 +
 linux-user/syscall.c       |  1 +
 6 files changed, 26 insertions(+), 2 deletions(-)
 create mode 100644 include/user/signal.h
bsd-user/signal-common.h +0 -1
index 77d7c7a78b7..4e634e04a30 100644
@@ -42,7 +42,6 @@ void process_pending_signals(CPUArchState *env);
 void queue_signal(CPUArchState *env, int sig, int si_type,
                   target_siginfo_t *info);
 void signal_init(void);
-int target_to_host_signal(int sig);
 void target_to_host_sigset(sigset_t *d, const target_sigset_t *s);
 
 /*
bsd-user/signal.c +1 -0
index b4e1458237a..8c51f6ce653 100644
@@ -24,6 +24,7 @@
 #include "user/cpu_loop.h"
 #include "exec/page-protection.h"
 #include "user/page-protection.h"
+#include "user/signal.h"
 #include "user/tswap-target.h"
 #include "gdbstub/user.h"
 #include "signal-common.h"
include/user/signal.h new file +23 -0
new file mode 100644
index 00000000000..19b6b9e5ddc
@@ -0,0 +1,23 @@
+/*
+ * Signal-related declarations.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+#ifndef USER_SIGNAL_H
+#define USER_SIGNAL_H
+
+#ifndef CONFIG_USER_ONLY
+#error Cannot include this header from system emulation
+#endif
+
+/**
+ * target_to_host_signal:
+ * @sig: target signal.
+ *
+ * On success, return the host signal between 0 (inclusive) and NSIG
+ * (exclusive) corresponding to the target signal @sig. Return any other value
+ * on failure.
+ */
+int target_to_host_signal(int sig);
+
+#endif
linux-user/signal-common.h +0 -1
index 8584d9ecc2a..196d2406f86 100644
@@ -61,7 +61,6 @@ void queue_signal(CPUArchState *env, int sig, int si_type,
                   target_siginfo_t *info);
 void host_to_target_siginfo(target_siginfo_t *tinfo, const siginfo_t *info);
 void target_to_host_siginfo(siginfo_t *info, const target_siginfo_t *tinfo);
-int target_to_host_signal(int sig);
 int host_to_target_signal(int sig);
 long do_sigreturn(CPUArchState *env);
 long do_rt_sigreturn(CPUArchState *env);
linux-user/signal.c +1 -0
index 087c4d270e4..bffbef235cd 100644
@@ -36,6 +36,7 @@
 #include "user/cpu_loop.h"
 #include "user/page-protection.h"
 #include "user/safe-syscall.h"
+#include "user/signal.h"
 #include "tcg/tcg.h"
 
 /* target_siginfo_t must fit in gdbstub's siginfo save area. */
linux-user/syscall.c +1 -0
index 78c7c0b34ef..53837113c4a 100644
@@ -138,6 +138,7 @@
 #include "user-mmap.h"
 #include "user/page-protection.h"
 #include "user/safe-syscall.h"
+#include "user/signal.h"
 #include "qemu/guest-random.h"
 #include "qemu/selfmap.h"
 #include "user/syscall-trace.h"
Signature · 1 line
2.47.1
#5 lore raw

PATCH v5 5/8 osdep: Introduce qemu_kill_thread()

In reply to Ilya Leoshkevich

Add a function for sending signals to individual threads. It does not make sense on Windows, so do not provide an implementation, so that if someone uses it by accident, they will get a linker error.

---
 include/qemu/osdep.h |  9 +++++++++
 util/oslib-posix.c   | 15 +++++++++++++++
 2 files changed, 24 insertions(+)
include/qemu/osdep.h +9 -0
index b94fb5fab8c..37ee3eabae3 100644
@@ -630,6 +630,15 @@ bool qemu_write_pidfile(const char *pidfile, Error **errp);
 
 int qemu_get_thread_id(void);
 
+/**
+ * qemu_kill_thread:
+ * @tid: thread id.
+ * @sig: host signal.
+ *
+ * Send @sig to one of QEMU's own threads with identifier @tid.
+ */
+int qemu_kill_thread(int tid, int sig);
+
 #ifndef CONFIG_IOVEC
 struct iovec {
     void *iov_base;
util/oslib-posix.c +15 -0
index 7a542cb50b5..f8eb3f17b2f 100644
@@ -111,6 +111,21 @@ int qemu_get_thread_id(void)
 #endif
 }
 
+int qemu_kill_thread(int tid, int sig)
+{
+#if defined(__linux__)
+    return syscall(__NR_tgkill, getpid(), tid, sig);
+#elif defined(__FreeBSD__)
+    return thr_kill2(getpid(), tid, sig);
+#elif defined(__NetBSD__)
+    return _lwp_kill(tid, sig);
+#elif defined(__OpenBSD__)
+    return thrkill(tid, sig, NULL);
+#else
+    return kill(tid, sig);
+#endif
+}
+
 int qemu_daemon(int nochdir, int noclose)
 {
     return daemon(nochdir, noclose);
Signature · 1 line
2.47.1
#4 lore raw

PATCH v5 4/8 user: Introduce host_interrupt_signal

In reply to Ilya Leoshkevich

Attaching to the gdbstub of a running process requires stopping its threads. For threads that run on a CPU, cpu_exit() is enough, but the only way to grab attention of a thread that is stuck in a long-running syscall is to interrupt it with a signal.

Reserve a host realtime signal for this, just like it's already done for TARGET_SIGABRT on Linux. This may reduce the number of available guest realtime signals by one, but this is acceptable, since there are quite a lot of them, and it's unlikely that there are apps that need them all.

Set signal_pending for the safe_sycall machinery to prevent invoking the syscall. This is a lie, since we don't queue a guest signal, but process_pending_signals() can handle the absence of pending signals. The syscall returns with QEMU_ERESTARTSYS errno, which arranges for the automatic restart. This is important, because it helps avoiding disturbing poorly written guests.

---
 bsd-user/signal.c     | 12 ++++++++++++
 include/user/signal.h |  2 ++
 linux-user/signal.c   | 25 ++++++++++++++++++++-----
 3 files changed, 34 insertions(+), 5 deletions(-)
bsd-user/signal.c +12 -0
index 8c51f6ce653..ff2ccbbf605 100644
@@ -51,6 +51,8 @@ static inline int sas_ss_flags(TaskState *ts, unsigned long sp)
         on_sig_stack(ts, sp) ? SS_ONSTACK : 0;
 }
 
+int host_interrupt_signal = SIGRTMAX;
+
 /*
  * The BSD ABIs use the same signal numbers across all the CPU architectures, so
  * (unlike Linux) these functions are just the identity mapping. This might not
@@ -491,6 +493,12 @@ static void host_signal_handler(int host_sig, siginfo_t *info, void *puc)
     uintptr_t pc = 0;
     bool sync_sig = false;
 
+    if (host_sig == host_interrupt_signal) {
+        ts->signal_pending = 1;
+        cpu_exit(thread_cpu);
+        return;
+    }
+
     /*
      * Non-spoofed SIGSEGV and SIGBUS are synchronous, and need special
      * handling wrt signal blocking and unwinding.
@@ -854,6 +862,9 @@ void signal_init(void)
 
     for (i = 1; i <= TARGET_NSIG; i++) {
         host_sig = target_to_host_signal(i);
+        if (host_sig == host_interrupt_signal) {
+            continue;
+        }
         sigaction(host_sig, NULL, &oact);
         if (oact.sa_sigaction == (void *)SIG_IGN) {
             sigact_table[i - 1]._sa_handler = TARGET_SIG_IGN;
@@ -872,6 +883,7 @@ void signal_init(void)
             sigaction(host_sig, &act, NULL);
         }
     }
+    sigaction(host_interrupt_signal, &act, NULL);
 }
 
 static void handle_pending_signal(CPUArchState *env, int sig,
include/user/signal.h +2 -0
index 19b6b9e5ddc..7fa33b05d91 100644
@@ -20,4 +20,6 @@
  */
 int target_to_host_signal(int sig);
 
+extern int host_interrupt_signal;
+
 #endif
linux-user/signal.c +20 -5
index bffbef235cd..81a98c6d02f 100644
@@ -517,6 +517,8 @@ static int core_dump_signal(int sig)
     }
 }
 
+int host_interrupt_signal;
+
 static void signal_table_init(const char *rtsig_map)
 {
     int hsig, tsig, count;
@@ -580,10 +582,10 @@ static void signal_table_init(const char *rtsig_map)
          * Attempts for configure "missing" signals via sigaction will be
          * silently ignored.
          *
-         * Reserve one signal for internal usage (see below).
+         * Reserve two signals for internal usage (see below).
          */
 
-        hsig = SIGRTMIN + 1;
+        hsig = SIGRTMIN + 2;
         for (tsig = TARGET_SIGRTMIN;
              hsig <= SIGRTMAX && tsig <= TARGET_NSIG;
              hsig++, tsig++) {
@@ -604,12 +606,17 @@ static void signal_table_init(const char *rtsig_map)
     host_to_target_signal_table[SIGABRT] = 0;
     for (hsig = SIGRTMIN; hsig <= SIGRTMAX; hsig++) {
         if (!host_to_target_signal_table[hsig]) {
-            host_to_target_signal_table[hsig] = TARGET_SIGABRT;
-            break;
+            if (host_interrupt_signal) {
+                host_to_target_signal_table[hsig] = TARGET_SIGABRT;
+                break;
+            } else {
+                host_interrupt_signal = hsig;
+            }
         }
     }
     if (hsig > SIGRTMAX) {
-        fprintf(stderr, "No rt signals left for SIGABRT mapping\n");
+        fprintf(stderr,
+                "No rt signals left for interrupt and SIGABRT mapping\n");
         exit(EXIT_FAILURE);
     }
 
@@ -689,6 +696,8 @@ void signal_init(const char *rtsig_map)
         }
         sigact_table[tsig - 1]._sa_handler = thand;
     }
+
+    sigaction(host_interrupt_signal, &act, NULL);
 }
 
 /* Force a synchronously taken signal. The kernel force_sig() function
@@ -1036,6 +1045,12 @@ static void host_signal_handler(int host_sig, siginfo_t *info, void *puc)
     bool sync_sig = false;
     void *sigmask;
 
+    if (host_sig == host_interrupt_signal) {
+        ts->signal_pending = 1;
+        cpu_exit(thread_cpu);
+        return;
+    }
+
     /*
      * Non-spoofed SIGSEGV and SIGBUS are synchronous, and need special
      * handling wrt signal blocking and unwinding.  Non-spoofed SIGILL,
Signature · 1 line
2.47.1
#1 lore raw

PATCH v5 1/8 gdbstub: Allow the %d placeholder in the socket path

In reply to Ilya Leoshkevich

Just like for QEMU_LOG_FILENAME, replace %d with PID in the GDB socket path. This allows running multi-process applications with, e.g., export QEMU_GDB=/tmp/qemu-%d.sock. Currently this is not possible, since the first process will cause the subsequent ones to fail due to not being able to bind() the GDB socket.

---
 gdbstub/user.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
gdbstub/user.c +10 -0
index 0b4bfa9c488..ef52f249ce9 100644
@@ -316,9 +316,19 @@ static bool gdb_accept_socket(int gdb_fd)
 
 static int gdbserver_open_socket(const char *path)
 {
+    g_autoptr(GString) buf = g_string_new("");
     struct sockaddr_un sockaddr = {};
+    char *pid_placeholder;
     int fd, ret;
 
+    pid_placeholder = strstr(path, "%d");
+    if (pid_placeholder != NULL) {
+        g_string_append_len(buf, path, pid_placeholder - path);
+        g_string_append_printf(buf, "%d", qemu_get_thread_id());
+        g_string_append(buf, pid_placeholder + 2);
+        path = buf->str;
+    }
+
     fd = socket(AF_UNIX, SOCK_STREAM, 0);
     if (fd < 0) {
         perror("create socket");
Signature · 1 line
2.47.1
#7 lore raw

PATCH v5 7/8 docs/user: Document the %d placeholder and suspend=n QEMU_GDB features

In reply to Ilya Leoshkevich
---
 docs/user/main.rst | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)
docs/user/main.rst +13 -3
index 7a126ee8093..8dcb1d90a8b 100644
@@ -50,7 +50,7 @@ Command line options
 
 ::
 
-   qemu-i386 [-h] [-d] [-L path] [-s size] [-cpu model] [-g port] [-B offset] [-R size] program [arguments...]
+   qemu-i386 [-h] [-d] [-L path] [-s size] [-cpu model] [-g endpoint] [-B offset] [-R size] program [arguments...]
 
 ``-h``
    Print the help
@@ -87,8 +87,18 @@ Debug options:
    Activate logging of the specified items (use '-d help' for a list of
    log items)
 
-``-g port``
-   Wait gdb connection to port
+``-g endpoint``
+   Wait gdb connection to a port (e.g., ``1234``) or a unix socket (e.g.,
+   ``/tmp/qemu.sock``).
+
+   If a unix socket path contains single ``%d`` placeholder (e.g.,
+   ``/tmp/qemu-%d.sock``), it is replaced by the emulator PID, which is useful
+   when passing this option via the ``QEMU_GDB`` environment variable to a
+   multi-process application.
+
+   If the endpoint address is followed by ``,suspend=n`` (e.g.,
+   ``1234,suspend=n``), then the emulated program starts without waiting for a
+   connection, which can be established at any later point in time.
 
 ``-one-insn-per-tb``
    Run the emulation with one guest instruction per translation block.
Signature · 1 line
2.47.1
#6 lore raw

PATCH v5 6/8 gdbstub: Allow late attachment

In reply to Ilya Leoshkevich

Allow debugging individual processes in multi-process applications by starting them with export QEMU_GDB=/tmp/qemu-%d.sock,suspend=n. Currently one would have to attach to every process to ensure the app makes progress.

In case suspend=n is not specified, the flow remains unchanged. If it is specified, then accepting the client connection is delegated to a thread. In the future this machinery may be reused for handling reconnections and interruptions.

On accepting a connection, the thread schedules gdb_handlesig() on the first CPU and wakes it up with host_interrupt_signal. Note that the result of this gdb_handlesig() invocation is handled, as opposed to many other existing call sites. These other call sites probably need to be fixed separately.

---
 bsd-user/main.c   |   1 -
 gdbstub/user.c    | 122 ++++++++++++++++++++++++++++++++++++++++++----
 linux-user/main.c |   1 -
 3 files changed, 112 insertions(+), 12 deletions(-)
bsd-user/main.c +0 -1
index 0a5bc578365..478c2b65e7d 100644
@@ -629,7 +629,6 @@ int main(int argc, char **argv)
 
     if (gdbstub) {
         gdbserver_start(gdbstub);
-        gdb_handlesig(cpu, 0, NULL, NULL, 0);
     }
     cpu_loop(env);
     /* never exits */
gdbstub/user.c +112 -10

145 lines not on this page · raw message

linux-user/main.c +0 -1
index b97634a32dd..affec6863aa 100644
@@ -1028,7 +1028,6 @@ int main(int argc, char **argv, char **envp)
                     gdbstub);
             exit(EXIT_FAILURE);
         }
-        gdb_handlesig(cpu, 0, NULL, NULL, 0);
     }
 
 #ifdef CONFIG_SEMIHOSTING
Signature · 1 line
2.47.1
#2 lore raw

PATCH v5 2/8 gdbstub: Try unlinking the unix socket before binding

In reply to Ilya Leoshkevich

In case an emulated process execve()s another emulated process, bind() will fail, because the socket already exists. So try deleting it. Use the existing unix_listen() function which does this. Link qemu-user with qemu-sockets.c and add the monitor_get_fd() stub.

Note that it is not possible to handle this in do_execv(): deleting gdbserver_user_state.socket_path before safe_execve() is not correct, because the latter may fail, and afterwards we may lose control.

---
 gdbstub/user.c     | 24 +++++-------------------
 stubs/meson.build  |  2 ++
 stubs/monitor-fd.c |  9 +++++++++
 util/meson.build   |  2 ++
 4 files changed, 18 insertions(+), 19 deletions(-)
 create mode 100644 stubs/monitor-fd.c
gdbstub/user.c +5 -19
index ef52f249ce9..2c500eb1e23 100644
@@ -10,6 +10,7 @@
  */
 
 #include "qemu/osdep.h"
+#include "qapi/error.h"
 #include "qemu/bitops.h"
 #include "qemu/cutils.h"
 #include "qemu/sockets.h"
@@ -317,9 +318,9 @@ static bool gdb_accept_socket(int gdb_fd)
 static int gdbserver_open_socket(const char *path)
 {
     g_autoptr(GString) buf = g_string_new("");
-    struct sockaddr_un sockaddr = {};
     char *pid_placeholder;
-    int fd, ret;
+    Error *err = NULL;
+    int fd;
 
     pid_placeholder = strstr(path, "%d");
     if (pid_placeholder != NULL) {
@@ -329,24 +330,9 @@ static int gdbserver_open_socket(const char *path)
         path = buf->str;
     }
 
-    fd = socket(AF_UNIX, SOCK_STREAM, 0);
+    fd = unix_listen(path, &err);
     if (fd < 0) {
-        perror("create socket");
-        return -1;
-    }
-
-    sockaddr.sun_family = AF_UNIX;
-    pstrcpy(sockaddr.sun_path, sizeof(sockaddr.sun_path) - 1, path);
-    ret = bind(fd, (struct sockaddr *)&sockaddr, sizeof(sockaddr));
-    if (ret < 0) {
-        perror("bind socket");
-        close(fd);
-        return -1;
-    }
-    ret = listen(fd, 1);
-    if (ret < 0) {
-        perror("listen socket");
-        close(fd);
+        warn_report_err(err);
         return -1;
     }
 
stubs/meson.build +2 -0
index e91614a874d..17168d03eed 100644
@@ -61,6 +61,8 @@ if have_user
   if not (have_system or have_tools)
     stub_ss.add(files('qdev.c'))
   endif
+
+  stub_ss.add(files('monitor-fd.c'))
 endif
 
 if have_system
stubs/monitor-fd.c new file +9 -0
new file mode 100644
index 00000000000..9bb67498850
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include "qemu/osdep.h"
+#include "monitor/monitor.h"
+
+int monitor_get_fd(Monitor *mon, const char *fdname, Error **errp)
+{
+    abort();
+}
util/meson.build +2 -0
index 5d8bef98912..780b5977a89 100644
@@ -84,6 +84,8 @@ if have_block or have_ga
   util_ss.add(files('qemu-coroutine.c', 'qemu-coroutine-lock.c', 'qemu-coroutine-io.c'))
   util_ss.add(files(f'coroutine-@[email protected]'))
   util_ss.add(files('thread-pool.c', 'qemu-timer.c'))
+endif
+if have_block or have_ga or have_user
   util_ss.add(files('qemu-sockets.c'))
 endif
 if have_block
Signature · 1 line
2.47.1