ARM: dts: nuvoton: Add OHCI node
PATCH v2 1/1 ARM: dts: nuvoton: Add OHCI node
The EHCI peripheral already exists in the devicetree, but the hardware also supports a discrete OHCI unit on the same USB PHY. Generic OHCI works fine for this device already and has been tested on real hardware.
---
V1 -> V2: Fixed nodename from ohci -> usb
arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi | 7 +++++++ 1 file changed, 7 insertions(+)
arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi +7 -0
@@ -151,6 +151,13 @@ ehci1: usb@f0806000 { status = "disabled"; }; + ohci1: usb@f0807000 { + compatible = "generic-ohci"; + reg = <0xf0807000 0x1000>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + fiu0: spi@fb000000 { compatible = "nuvoton,npcm750-fiu"; #address-cells = <1>;
Signature · 1 line
2.49.0.472.ge94155a9ec-goog
Quoted 5 lines · William A. Kennington III
The EHCI peripheral already exists in the devicetree, but the hardware also supports a discrete OHCI unit on the same USB PHY. Generic OHCI works fine for this device already and has been tested on real hardware.
Thanks, I've applied this to be picked up through the BMC tree.
Signature · 1 line
Andrew Jeffery <[email protected]>
Tomer Maimon
Reviewed-byWilliam, thanks for the patch.
Quoted 13 lines · Andrew Jeffery
Quoted 5 lines · William A. Kennington III
The EHCI peripheral already exists in the devicetree, but the hardware also supports a discrete OHCI unit on the same USB PHY. Generic OHCI works fine for this device already and has been tested on real hardware.
Thanks, I've applied this to be picked up through the BMC tree.
--
Andrew Jeffery <[email protected]>