zedboard correct comments in lowlevel.c
Subsystems (2)
PATCH 1/1 zedboard correct comments in lowlevel.c
From: Johannes Roith <[email protected]>
According to the TRM of the Zynq 7000 the registers under 'UART1 pinmux' represents the pinmux for UART0. So, I fixed the comments and also added the pin number for the UART0, UART1 and QSPI pins to the pinctrl.
Link to TRM page for pinmux:
https://docs.amd.com/r/en-US/ug585-zynq-7000-SoC-TRM/Register-slcr-MIO_PIN_50
--- arch/arm/boards/avnet-zedboard/lowlevel.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
arch/arm/boards/avnet-zedboard/lowlevel.c +3 -2
@@ -223,12 +223,13 @@ static void avnet_zedboard_ps7_init(void)writel (0x00000081 ,0XF8006000 );/* poor mans pinctrl */ +/* UART1 pinmux TxD: MIO_PIN 48, RxD: MIO_PIN 49 */ writel (0x000002E0 ,ZYNQ_MIO_BASE +0xC0 );writel (0x000002E1 ,ZYNQ_MIO_BASE +0xC4 ); -/* UART1 pinmux */ +/* UART0 pinmux TxD: MIO_PIN 50, RxD: MIO_PIN 51 */ writel (0x000002E1 ,ZYNQ_MIO_BASE +0xC8 );writel (0x000002E0 ,ZYNQ_MIO_BASE +0xCC ); -/* QSPI pinmux */ +/* QSPI pinmux MIO_PIN 01 - 08 */ writel (0x00001602 ,ZYNQ_MIO_BASE +0x04 );writel (0x00000702 ,ZYNQ_MIO_BASE +0x08 );writel (0x00000702 ,ZYNQ_MIO_BASE +0x0c );
Signature · 1 line
2.39.5
Sascha Hauer
AppliedQuoted 9 lines · On Mon, 28 Apr 2025 19:54:24 +0200, [email protected] wrote:
Signed-off-by Johannes Roith <[email protected]>According to the TRM of the Zynq 7000 the registers under 'UART1 pinmux' represents the pinmux for UART0. So, I fixed the comments and also added the pin number for the UART0, UART1 and QSPI pins to the pinctrl.
Link to TRM page for pinmux:
[...]
Applied, thanks!
[1/1] zedboard correct comments in lowlevel.c
https://git.pengutronix.de/cgit/barebox/commit/?id=72ea1dbb99d6 (link may not be stable)
Best regards,
Signature · 1 line
Sascha Hauer <[email protected]>