Skip to contentSkip to conversation

bpf: Introduce BPF_F_CPU and BPF_F_ALL_CPUS flags for percpu maps

PATCH Superseded Leon Hwang 2 participants 13 messages Sep 25, 2025 – Sep 29, 2025

Subsystems (5)
Kselftest BPF BPF selftests BPF core +1 more subsystems

v8 of 13 Superseded Latest is v13 →

lore
Share & tools
lore

Leon Hwang

author
#0 lore raw

v8 cover bpf: Introduce BPF_F_CPU and BPF_F_ALL_CPUS flags for percpu maps

This patch set introduces the BPF_F_CPU and BPF_F_ALL_CPUS flags for percpu maps, as the requirement of BPF_F_ALL_CPUS flag for percpu_array maps was discussed in the thread of
"[PATCH bpf-next v3 0/4] bpf: Introduce global percpu data"[1].

The goal of BPF_F_ALL_CPUS flag is to reduce data caching overhead in light skeletons by allowing a single value to be reused to update values across all CPUs. This avoids the M:N problem where M cached values are used to update a map on N CPUs kernel.

The BPF_F_CPU flag is accompanied by *flags*-embedded cpu info, which specifies the target CPU for the operation:

* For lookup operations: the flag field alongside cpu info enable querying a value on the specified CPU.
* For update operations: the flag field alongside cpu info enable updating value for specified CPU.

Links:
[1] https://lore.kernel.org/bpf/[email protected]/

Changes:
v7 -> v8:
* Address comments from Andrii:
* Check BPF_F_LOCK when update percpu_array, percpu_hash and lru_percpu_hash maps.
* Refactor flags check in __htab_map_lookup_and_delete_batch().
* Keep value_size unaligned and copy value using copy_map_value() in __htab_map_lookup_and_delete_batch() when BPF_F_CPU is specified.
* Update warn message in libbpf's validate_map_op().
* Update comment of libbpf's bpf_map__lookup_elem().

v6 -> v7:
* Get correct value size for percpu_hash and lru_percpu_hash in update_batch API.
* Set 'count' as 'max_entries' in test cases for lookup_batch API.
* Address comment from Alexei:
* Move cpu flags check into bpf_map_check_op_flags().

v5 -> v6:
* Move bpf_map_check_op_flags() from 'bpf.h' to 'syscall.c'.
* Address comments from Alexei:
* Drop the refactoring code of data copying logic for percpu maps.
* Drop bpf_map_check_op_flags() wrappers.

v4 -> v5:
* Address comments from Andrii:
* Refactor data copying logic for all percpu maps.
* Drop this_cpu_ptr() micro-optimization.
* Drop cpu check in libbpf's validate_map_op().
* Enhance bpf_map_check_op_flags() using *allowed flags* instead of

    'extra_flags_mask'.

v3 -> v4:
* Address comments from Andrii:
* Remove unnecessary map_type check in bpf_map_value_size().
* Reduce code churn.
* Remove unnecessary do_delete check in

    __htab_map_lookup_and_delete_batch().
  * Introduce bpf_percpu_copy_to_user() and bpf_percpu_copy_from_user().
  * Rename check_map_flags() to bpf_map_check_op_flags() with
    extra_flags_mask.
  * Add human-readable pr_warn() explanations in validate_map_op().
  * Use flags in bpf_map__delete_elem() and
    bpf_map__lookup_and_delete_elem().

* Drop "for alignment reasons".
v3 link: https://lore.kernel.org/bpf/[email protected]/

v2 -> v3:
* Address comments from Alexei:
* Use BPF_F_ALL_CPUS instead of BPF_ALL_CPUS magic.
* Introduce these two cpu flags for all percpu maps.
* Address comments from Jiri:
* Reduce some unnecessary u32 cast.
* Refactor more generic map flags check function.
* A code style issue.
v2 link: https://lore.kernel.org/bpf/[email protected]/

v1 -> v2:
* Address comments from Andrii:
* Embed cpu info as high 32 bits of *flags* totally.
* Use ERANGE instead of E2BIG.
* Few format issues.

Leon Hwang (7):
bpf: Introduce internal bpf_map_check_op_flags helper function
bpf: Introduce BPF_F_CPU and BPF_F_ALL_CPUS flags
bpf: Add BPF_F_CPU and BPF_F_ALL_CPUS flags support for percpu_array
maps
bpf: Add BPF_F_CPU and BPF_F_ALL_CPUS flags support for percpu_hash
and lru_percpu_hash maps
bpf: Add BPF_F_CPU and BPF_F_ALL_CPUS flags support for
percpu_cgroup_storage maps
libbpf: Add BPF_F_CPU and BPF_F_ALL_CPUS flags support for percpu maps selftests/bpf: Add cases to test BPF_F_CPU and BPF_F_ALL_CPUS flags

 include/linux/bpf-cgroup.h                    |   4 +-
 include/linux/bpf.h                           |  44 +++-
 include/uapi/linux/bpf.h                      |   2 +
 kernel/bpf/arraymap.c                         |  24 +-
 kernel/bpf/hashtab.c                          |  79 ++++--
 kernel/bpf/local_storage.c                    |  22 +-
 kernel/bpf/syscall.c                          |  65 +++--
 tools/include/uapi/linux/bpf.h                |   2 +
 tools/lib/bpf/bpf.h                           |   8 +
 tools/lib/bpf/libbpf.c                        |  26 +-
 tools/lib/bpf/libbpf.h                        |  21 +-
 .../selftests/bpf/prog_tests/percpu_alloc.c   | 234 ++++++++++++++++++
 .../selftests/bpf/progs/percpu_alloc_array.c  |  32 +++
 13 files changed, 473 insertions(+), 90 deletions(-)

--
2.50.1

author
#1 lore raw

PATCH v8 1/7 bpf: Introduce internal bpf_map_check_op_flags helper function

It is to unify map flags checking for lookup_elem, update_elem, lookup_batch and update_batch APIs.

Therefore, it will be convenient to check BPF_F_CPU and BPF_F_ALL_CPUS flags in it for these APIs in next patch.

---
 include/linux/bpf.h  | 11 +++++++++++
 kernel/bpf/syscall.c | 34 +++++++++++-----------------------
 2 files changed, 22 insertions(+), 23 deletions(-)
include/linux/bpf.h +11 -0
index ea2ed6771cc60..536a640246fec 100644
@@ -3768,4 +3768,15 @@ int bpf_prog_get_file_line(struct bpf_prog *prog, unsigned long ip, const char *
 			   const char **linep, int *nump);
 struct bpf_prog *bpf_prog_find_from_stack(void);
 
+static inline int bpf_map_check_op_flags(struct bpf_map *map, u64 flags, u64 allowed_flags)
+{
+	if (flags & ~allowed_flags)
+		return -EINVAL;
+
+	if ((flags & BPF_F_LOCK) && !btf_record_has_field(map->record, BPF_SPIN_LOCK))
+		return -EINVAL;
+
+	return 0;
+}
+
 #endif /* _LINUX_BPF_H */
kernel/bpf/syscall.c +11 -23
index adb05d235011f..84261a0211c51 100644
@@ -1708,9 +1708,6 @@ static int map_lookup_elem(union bpf_attr *attr)
 	if (CHECK_ATTR(BPF_MAP_LOOKUP_ELEM))
 		return -EINVAL;
 
-	if (attr->flags & ~BPF_F_LOCK)
-		return -EINVAL;
-
 	CLASS(fd, f)(attr->map_fd);
 	map = __bpf_map_get(f);
 	if (IS_ERR(map))
@@ -1718,9 +1715,9 @@ static int map_lookup_elem(union bpf_attr *attr)
 	if (!(map_get_sys_perms(map, f) & FMODE_CAN_READ))
 		return -EPERM;
 
-	if ((attr->flags & BPF_F_LOCK) &&
-	    !btf_record_has_field(map->record, BPF_SPIN_LOCK))
-		return -EINVAL;
+	err = bpf_map_check_op_flags(map, attr->flags, BPF_F_LOCK);
+	if (err)
+		return err;
 
 	key = __bpf_copy_key(ukey, map->key_size);
 	if (IS_ERR(key))
@@ -1783,11 +1780,9 @@ static int map_update_elem(union bpf_attr *attr, bpfptr_t uattr)
 		goto err_put;
 	}
 
-	if ((attr->flags & BPF_F_LOCK) &&
-	    !btf_record_has_field(map->record, BPF_SPIN_LOCK)) {
-		err = -EINVAL;
+	err = bpf_map_check_op_flags(map, attr->flags, ~0);
+	if (err)
 		goto err_put;
-	}
 
 	key = ___bpf_copy_key(ukey, map->key_size);
 	if (IS_ERR(key)) {
@@ -1991,13 +1986,9 @@ int generic_map_update_batch(struct bpf_map *map, struct file *map_file,
 	void *key, *value;
 	int err = 0;
 
-	if (attr->batch.elem_flags & ~BPF_F_LOCK)
-		return -EINVAL;
-
-	if ((attr->batch.elem_flags & BPF_F_LOCK) &&
-	    !btf_record_has_field(map->record, BPF_SPIN_LOCK)) {
-		return -EINVAL;
-	}
+	err = bpf_map_check_op_flags(map, attr->batch.elem_flags, BPF_F_LOCK);
+	if (err)
+		return err;
 
 	value_size = bpf_map_value_size(map);
 
@@ -2054,12 +2045,9 @@ int generic_map_lookup_batch(struct bpf_map *map,
 	u32 value_size, cp, max_count;
 	int err;
 
-	if (attr->batch.elem_flags & ~BPF_F_LOCK)
-		return -EINVAL;
-
-	if ((attr->batch.elem_flags & BPF_F_LOCK) &&
-	    !btf_record_has_field(map->record, BPF_SPIN_LOCK))
-		return -EINVAL;
+	err = bpf_map_check_op_flags(map, attr->batch.elem_flags, BPF_F_LOCK);
+	if (err)
+		return err;
 
 	value_size = bpf_map_value_size(map);
 
Signature · 1 line
2.50.1
author
#2 lore raw

PATCH v8 2/7 bpf: Introduce BPF_F_CPU and BPF_F_ALL_CPUS flags

In reply to Leon Hwang

Introduce BPF_F_CPU and BPF_F_ALL_CPUS flags and check them for following APIs:

* 'map_lookup_elem()'
* 'map_update_elem()'
* 'generic_map_lookup_batch()'
* 'generic_map_update_batch()'

And, get the correct value size for these APIs.

---
 include/linux/bpf.h            | 23 ++++++++++++++++++++++-
 include/uapi/linux/bpf.h       |  2 ++
 kernel/bpf/syscall.c           | 31 +++++++++++++++++--------------
 tools/include/uapi/linux/bpf.h |  2 ++
 4 files changed, 43 insertions(+), 15 deletions(-)
include/linux/bpf.h +22 -1
index 536a640246fec..80719765d40e6 100644
@@ -3768,14 +3768,35 @@ int bpf_prog_get_file_line(struct bpf_prog *prog, unsigned long ip, const char *
 			   const char **linep, int *nump);
 struct bpf_prog *bpf_prog_find_from_stack(void);
 
+static inline bool bpf_map_supports_cpu_flags(enum bpf_map_type map_type)
+{
+	return false;
+}
+
 static inline int bpf_map_check_op_flags(struct bpf_map *map, u64 flags, u64 allowed_flags)
 {
-	if (flags & ~allowed_flags)
+	u32 cpu;
+
+	if ((u32)flags & ~allowed_flags)
 		return -EINVAL;
 
 	if ((flags & BPF_F_LOCK) && !btf_record_has_field(map->record, BPF_SPIN_LOCK))
 		return -EINVAL;
 
+	if (!(flags & BPF_F_CPU) && flags >> 32)
+		return -EINVAL;
+
+	if (flags & (BPF_F_CPU | BPF_F_ALL_CPUS)) {
+		if (!bpf_map_supports_cpu_flags(map->map_type))
+			return -EINVAL;
+		if ((flags & BPF_F_CPU) && (flags & BPF_F_ALL_CPUS))
+			return -EINVAL;
+
+		cpu = flags >> 32;
+		if ((flags & BPF_F_CPU) && cpu >= num_possible_cpus())
+			return -ERANGE;
+	}
+
 	return 0;
 }
 
include/uapi/linux/bpf.h +2 -0
index ae83d8649ef1c..f827353424ec5 100644
@@ -1372,6 +1372,8 @@ enum {
 	BPF_NOEXIST	= 1, /* create new element if it didn't exist */
 	BPF_EXIST	= 2, /* update existing element */
 	BPF_F_LOCK	= 4, /* spin_lock-ed map_lookup/map_update */
+	BPF_F_CPU	= 8, /* cpu flag for percpu maps, upper 32-bit of flags is a cpu number */
+	BPF_F_ALL_CPUS	= 16, /* update value across all CPUs for percpu maps */
 };
 
 /* flags for BPF_MAP_CREATE command */
kernel/bpf/syscall.c +17 -14
index 84261a0211c51..d1bbc309b62ff 100644
@@ -133,12 +133,14 @@ bool bpf_map_write_active(const struct bpf_map *map)
 	return atomic64_read(&map->writecnt) != 0;
 }
 
-static u32 bpf_map_value_size(const struct bpf_map *map)
-{
-	if (map->map_type == BPF_MAP_TYPE_PERCPU_HASH ||
-	    map->map_type == BPF_MAP_TYPE_LRU_PERCPU_HASH ||
-	    map->map_type == BPF_MAP_TYPE_PERCPU_ARRAY ||
-	    map->map_type == BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE)
+static u32 bpf_map_value_size(const struct bpf_map *map, u64 flags)
+{
+	if (flags & (BPF_F_CPU | BPF_F_ALL_CPUS))
+		return round_up(map->value_size, 8);
+	else if (map->map_type == BPF_MAP_TYPE_PERCPU_HASH ||
+		 map->map_type == BPF_MAP_TYPE_LRU_PERCPU_HASH ||
+		 map->map_type == BPF_MAP_TYPE_PERCPU_ARRAY ||
+		 map->map_type == BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE)
 		return round_up(map->value_size, 8) * num_possible_cpus();
 	else if (IS_FD_MAP(map))
 		return sizeof(u32);
@@ -1715,7 +1717,7 @@ static int map_lookup_elem(union bpf_attr *attr)
 	if (!(map_get_sys_perms(map, f) & FMODE_CAN_READ))
 		return -EPERM;
 
-	err = bpf_map_check_op_flags(map, attr->flags, BPF_F_LOCK);
+	err = bpf_map_check_op_flags(map, attr->flags, BPF_F_LOCK | BPF_F_CPU);
 	if (err)
 		return err;
 
@@ -1723,7 +1725,7 @@ static int map_lookup_elem(union bpf_attr *attr)
 	if (IS_ERR(key))
 		return PTR_ERR(key);
 
-	value_size = bpf_map_value_size(map);
+	value_size = bpf_map_value_size(map, attr->flags);
 
 	err = -ENOMEM;
 	value = kvmalloc(value_size, GFP_USER | __GFP_NOWARN);
@@ -1790,7 +1792,7 @@ static int map_update_elem(union bpf_attr *attr, bpfptr_t uattr)
 		goto err_put;
 	}
 
-	value_size = bpf_map_value_size(map);
+	value_size = bpf_map_value_size(map, attr->flags);
 	value = kvmemdup_bpfptr(uvalue, value_size);
 	if (IS_ERR(value)) {
 		err = PTR_ERR(value);
@@ -1986,11 +1988,12 @@ int generic_map_update_batch(struct bpf_map *map, struct file *map_file,
 	void *key, *value;
 	int err = 0;
 
-	err = bpf_map_check_op_flags(map, attr->batch.elem_flags, BPF_F_LOCK);
+	err = bpf_map_check_op_flags(map, attr->batch.elem_flags,
+				     BPF_F_LOCK | BPF_F_CPU | BPF_F_ALL_CPUS);
 	if (err)
 		return err;
 
-	value_size = bpf_map_value_size(map);
+	value_size = bpf_map_value_size(map, attr->batch.elem_flags);
 
 	max_count = attr->batch.count;
 	if (!max_count)
@@ -2045,11 +2048,11 @@ int generic_map_lookup_batch(struct bpf_map *map,
 	u32 value_size, cp, max_count;
 	int err;
 
-	err = bpf_map_check_op_flags(map, attr->batch.elem_flags, BPF_F_LOCK);
+	err = bpf_map_check_op_flags(map, attr->batch.elem_flags, BPF_F_LOCK | BPF_F_CPU);
 	if (err)
 		return err;
 
-	value_size = bpf_map_value_size(map);
+	value_size = bpf_map_value_size(map, attr->batch.elem_flags);
 
 	max_count = attr->batch.count;
 	if (!max_count)
@@ -2171,7 +2174,7 @@ static int map_lookup_and_delete_elem(union bpf_attr *attr)
 		goto err_put;
 	}
 
-	value_size = bpf_map_value_size(map);
+	value_size = bpf_map_value_size(map, 0);
 
 	err = -ENOMEM;
 	value = kvmalloc(value_size, GFP_USER | __GFP_NOWARN);
tools/include/uapi/linux/bpf.h +2 -0
index ae83d8649ef1c..f827353424ec5 100644
@@ -1372,6 +1372,8 @@ enum {
 	BPF_NOEXIST	= 1, /* create new element if it didn't exist */
 	BPF_EXIST	= 2, /* update existing element */
 	BPF_F_LOCK	= 4, /* spin_lock-ed map_lookup/map_update */
+	BPF_F_CPU	= 8, /* cpu flag for percpu maps, upper 32-bit of flags is a cpu number */
+	BPF_F_ALL_CPUS	= 16, /* update value across all CPUs for percpu maps */
 };
 
 /* flags for BPF_MAP_CREATE command */
Signature · 1 line
2.50.1
author
#4 lore raw

PATCH v8 3/7 bpf: Add BPF_F_CPU and BPF_F_ALL_CPUS flags support for percpu_array maps

In reply to Leon Hwang

Introduce support for the BPF_F_ALL_CPUS flag in percpu_array maps to allow updating values for all CPUs with a single value for both update_elem and update_batch APIs.

Introduce support for the BPF_F_CPU flag in percpu_array maps to allow:

* update value for specified CPU for both update_elem and update_batch APIs.
* lookup value for specified CPU for both lookup_elem and lookup_batch APIs.

The BPF_F_CPU flag is passed via:

* map_flags of lookup_elem and update_elem APIs along with embedded cpu info.
* elem_flags of lookup_batch and update_batch APIs along with embedded cpu info.

---
 include/linux/bpf.h   |  9 +++++++--
 kernel/bpf/arraymap.c | 24 +++++++++++++++++++++---
 kernel/bpf/syscall.c  |  2 +-
 3 files changed, 29 insertions(+), 6 deletions(-)
include/linux/bpf.h +7 -2
index 80719765d40e6..9c4101f537c86 100644
@@ -2718,7 +2718,7 @@ int map_set_for_each_callback_args(struct bpf_verifier_env *env,
 				   struct bpf_func_state *callee);
 
 int bpf_percpu_hash_copy(struct bpf_map *map, void *key, void *value);
-int bpf_percpu_array_copy(struct bpf_map *map, void *key, void *value);
+int bpf_percpu_array_copy(struct bpf_map *map, void *key, void *value, u64 flags);
 int bpf_percpu_hash_update(struct bpf_map *map, void *key, void *value,
 			   u64 flags);
 int bpf_percpu_array_update(struct bpf_map *map, void *key, void *value,
@@ -3770,7 +3770,12 @@ struct bpf_prog *bpf_prog_find_from_stack(void);
 
 static inline bool bpf_map_supports_cpu_flags(enum bpf_map_type map_type)
 {
-	return false;
+	switch (map_type) {
+	case BPF_MAP_TYPE_PERCPU_ARRAY:
+		return true;
+	default:
+		return false;
+	}
 }
 
 static inline int bpf_map_check_op_flags(struct bpf_map *map, u64 flags, u64 allowed_flags)
kernel/bpf/arraymap.c +21 -3
index 80b1765a31596..a8bf1f99ad548 100644
@@ -307,7 +307,7 @@ static void *percpu_array_map_lookup_percpu_elem(struct bpf_map *map, void *key,
 	return per_cpu_ptr(array->pptrs[index & array->index_mask], cpu);
 }
 
-int bpf_percpu_array_copy(struct bpf_map *map, void *key, void *value)
+int bpf_percpu_array_copy(struct bpf_map *map, void *key, void *value, u64 map_flags)
 {
 	struct bpf_array *array = container_of(map, struct bpf_array, map);
 	u32 index = *(u32 *)key;
@@ -325,11 +325,18 @@ int bpf_percpu_array_copy(struct bpf_map *map, void *key, void *value)
 	size = array->elem_size;
 	rcu_read_lock();
 	pptr = array->pptrs[index & array->index_mask];
+	if (map_flags & BPF_F_CPU) {
+		cpu = map_flags >> 32;
+		copy_map_value_long(map, value, per_cpu_ptr(pptr, cpu));
+		check_and_init_map_value(map, value);
+		goto unlock;
+	}
 	for_each_possible_cpu(cpu) {
 		copy_map_value_long(map, value + off, per_cpu_ptr(pptr, cpu));
 		check_and_init_map_value(map, value + off);
 		off += size;
 	}
+unlock:
 	rcu_read_unlock();
 	return 0;
 }
@@ -402,7 +409,7 @@ int bpf_percpu_array_update(struct bpf_map *map, void *key, void *value,
 	int cpu, off = 0;
 	u32 size;
 
-	if (unlikely(map_flags > BPF_EXIST))
+	if (unlikely((map_flags & BPF_F_LOCK) || (u32)map_flags > BPF_F_ALL_CPUS))
 		/* unknown flags */
 		return -EINVAL;
 
@@ -423,11 +430,22 @@ int bpf_percpu_array_update(struct bpf_map *map, void *key, void *value,
 	size = array->elem_size;
 	rcu_read_lock();
 	pptr = array->pptrs[index & array->index_mask];
+	if (map_flags & BPF_F_CPU) {
+		cpu = map_flags >> 32;
+		copy_map_value_long(map, per_cpu_ptr(pptr, cpu), value);
+		bpf_obj_free_fields(array->map.record, per_cpu_ptr(pptr, cpu));
+		goto unlock;
+	}
 	for_each_possible_cpu(cpu) {
 		copy_map_value_long(map, per_cpu_ptr(pptr, cpu), value + off);
 		bpf_obj_free_fields(array->map.record, per_cpu_ptr(pptr, cpu));
-		off += size;
+		/* same user-provided value is used if BPF_F_ALL_CPUS is
+		 * specified, otherwise value is an array of per-CPU values.
+		 */
+		if (!(map_flags & BPF_F_ALL_CPUS))
+			off += size;
 	}
+unlock:
 	rcu_read_unlock();
 	return 0;
 }
kernel/bpf/syscall.c +1 -1
index d1bbc309b62ff..91868fded80e2 100644
@@ -318,7 +318,7 @@ static int bpf_map_copy_value(struct bpf_map *map, void *key, void *value,
 	    map->map_type == BPF_MAP_TYPE_LRU_PERCPU_HASH) {
 		err = bpf_percpu_hash_copy(map, key, value);
 	} else if (map->map_type == BPF_MAP_TYPE_PERCPU_ARRAY) {
-		err = bpf_percpu_array_copy(map, key, value);
+		err = bpf_percpu_array_copy(map, key, value, flags);
 	} else if (map->map_type == BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE) {
 		err = bpf_percpu_cgroup_storage_copy(map, key, value);
 	} else if (map->map_type == BPF_MAP_TYPE_STACK_TRACE) {
Signature · 1 line
2.50.1
author
#5 lore raw

PATCH v8 4/7 bpf: Add BPF_F_CPU and BPF_F_ALL_CPUS flags support for percpu_hash and lru_percpu_hash maps

In reply to Leon Hwang

Introduce BPF_F_ALL_CPUS flag support for percpu_hash and lru_percpu_hash maps to allow updating values for all CPUs with a single value for both update_elem and update_batch APIs.

Introduce BPF_F_CPU flag support for percpu_hash and lru_percpu_hash maps to allow:

* update value for specified CPU for both update_elem and update_batch APIs.
* lookup value for specified CPU for both lookup_elem and lookup_batch APIs.

The BPF_F_CPU flag is passed via:

* map_flags along with embedded cpu info.
* elem_flags along with embedded cpu info.

---
 include/linux/bpf.h  |  4 ++-
 kernel/bpf/hashtab.c | 79 ++++++++++++++++++++++++++++++--------------
 kernel/bpf/syscall.c |  2 +-
 3 files changed, 59 insertions(+), 26 deletions(-)
include/linux/bpf.h +3 -1
index 9c4101f537c86..04041dd35d42f 100644
@@ -2717,7 +2717,7 @@ int map_set_for_each_callback_args(struct bpf_verifier_env *env,
 				   struct bpf_func_state *caller,
 				   struct bpf_func_state *callee);
 
-int bpf_percpu_hash_copy(struct bpf_map *map, void *key, void *value);
+int bpf_percpu_hash_copy(struct bpf_map *map, void *key, void *value, u64 flags);
 int bpf_percpu_array_copy(struct bpf_map *map, void *key, void *value, u64 flags);
 int bpf_percpu_hash_update(struct bpf_map *map, void *key, void *value,
 			   u64 flags);
@@ -3772,6 +3772,8 @@ static inline bool bpf_map_supports_cpu_flags(enum bpf_map_type map_type)
 {
 	switch (map_type) {
 	case BPF_MAP_TYPE_PERCPU_ARRAY:
+	case BPF_MAP_TYPE_PERCPU_HASH:
+	case BPF_MAP_TYPE_LRU_PERCPU_HASH:
 		return true;
 	default:
 		return false;
kernel/bpf/hashtab.c +55 -24

205 lines not on this page · raw message

kernel/bpf/syscall.c +1 -1
index 91868fded80e2..f336ca1f48d9b 100644
@@ -316,7 +316,7 @@ static int bpf_map_copy_value(struct bpf_map *map, void *key, void *value,
 	bpf_disable_instrumentation();
 	if (map->map_type == BPF_MAP_TYPE_PERCPU_HASH ||
 	    map->map_type == BPF_MAP_TYPE_LRU_PERCPU_HASH) {
-		err = bpf_percpu_hash_copy(map, key, value);
+		err = bpf_percpu_hash_copy(map, key, value, flags);
 	} else if (map->map_type == BPF_MAP_TYPE_PERCPU_ARRAY) {
 		err = bpf_percpu_array_copy(map, key, value, flags);
 	} else if (map->map_type == BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE) {
Signature · 1 line
2.50.1
author
#6 lore raw

PATCH v8 5/7 bpf: Add BPF_F_CPU and BPF_F_ALL_CPUS flags support for percpu_cgroup_storage maps

In reply to Leon Hwang

Introduce BPF_F_ALL_CPUS flag support for percpu_cgroup_storage maps to allow updating values for all CPUs with a single value for update_elem API.

Introduce BPF_F_CPU flag support for percpu_cgroup_storage maps to allow:

* update value for specified CPU for update_elem API.
* lookup value for specified CPU for lookup_elem API.

The BPF_F_CPU flag is passed via map_flags along with embedded cpu info.

---
 include/linux/bpf-cgroup.h |  4 ++--
 include/linux/bpf.h        |  1 +
 kernel/bpf/local_storage.c | 22 +++++++++++++++++++---
 kernel/bpf/syscall.c       |  2 +-
 4 files changed, 23 insertions(+), 6 deletions(-)
include/linux/bpf-cgroup.h +2 -2
index aedf573bdb426..013f4db9903fd 100644
@@ -172,7 +172,7 @@ void bpf_cgroup_storage_link(struct bpf_cgroup_storage *storage,
 void bpf_cgroup_storage_unlink(struct bpf_cgroup_storage *storage);
 int bpf_cgroup_storage_assign(struct bpf_prog_aux *aux, struct bpf_map *map);
 
-int bpf_percpu_cgroup_storage_copy(struct bpf_map *map, void *key, void *value);
+int bpf_percpu_cgroup_storage_copy(struct bpf_map *map, void *key, void *value, u64 flags);
 int bpf_percpu_cgroup_storage_update(struct bpf_map *map, void *key,
 				     void *value, u64 flags);
 
@@ -467,7 +467,7 @@ static inline struct bpf_cgroup_storage *bpf_cgroup_storage_alloc(
 static inline void bpf_cgroup_storage_free(
 	struct bpf_cgroup_storage *storage) {}
 static inline int bpf_percpu_cgroup_storage_copy(struct bpf_map *map, void *key,
-						 void *value) {
+						 void *value, u64 flags) {
 	return 0;
 }
 static inline int bpf_percpu_cgroup_storage_update(struct bpf_map *map,
include/linux/bpf.h +1 -0
index 04041dd35d42f..c19237cd122ac 100644
@@ -3774,6 +3774,7 @@ static inline bool bpf_map_supports_cpu_flags(enum bpf_map_type map_type)
 	case BPF_MAP_TYPE_PERCPU_ARRAY:
 	case BPF_MAP_TYPE_PERCPU_HASH:
 	case BPF_MAP_TYPE_LRU_PERCPU_HASH:
+	case BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE:
 		return true;
 	default:
 		return false;
kernel/bpf/local_storage.c +19 -3
index c93a756e035c0..6887a78b4823a 100644
@@ -180,7 +180,7 @@ static long cgroup_storage_update_elem(struct bpf_map *map, void *key,
 }
 
 int bpf_percpu_cgroup_storage_copy(struct bpf_map *_map, void *key,
-				   void *value)
+				   void *value, u64 map_flags)
 {
 	struct bpf_cgroup_storage_map *map = map_to_storage(_map);
 	struct bpf_cgroup_storage *storage;
@@ -199,11 +199,17 @@ int bpf_percpu_cgroup_storage_copy(struct bpf_map *_map, void *key,
 	 * will not leak any kernel data
 	 */
 	size = round_up(_map->value_size, 8);
+	if (map_flags & BPF_F_CPU) {
+		cpu = map_flags >> 32;
+		bpf_long_memcpy(value, per_cpu_ptr(storage->percpu_buf, cpu), size);
+		goto unlock;
+	}
 	for_each_possible_cpu(cpu) {
 		bpf_long_memcpy(value + off,
 				per_cpu_ptr(storage->percpu_buf, cpu), size);
 		off += size;
 	}
+unlock:
 	rcu_read_unlock();
 	return 0;
 }
@@ -216,7 +222,7 @@ int bpf_percpu_cgroup_storage_update(struct bpf_map *_map, void *key,
 	int cpu, off = 0;
 	u32 size;
 
-	if (map_flags != BPF_ANY && map_flags != BPF_EXIST)
+	if ((u32)map_flags & ~(BPF_ANY | BPF_EXIST | BPF_F_CPU | BPF_F_ALL_CPUS))
 		return -EINVAL;
 
 	rcu_read_lock();
@@ -233,11 +239,21 @@ int bpf_percpu_cgroup_storage_update(struct bpf_map *_map, void *key,
 	 * so no kernel data leaks possible
 	 */
 	size = round_up(_map->value_size, 8);
+	if (map_flags & BPF_F_CPU) {
+		cpu = map_flags >> 32;
+		bpf_long_memcpy(per_cpu_ptr(storage->percpu_buf, cpu), value, size);
+		goto unlock;
+	}
 	for_each_possible_cpu(cpu) {
 		bpf_long_memcpy(per_cpu_ptr(storage->percpu_buf, cpu),
 				value + off, size);
-		off += size;
+		/* same user-provided value is used if BPF_F_ALL_CPUS is
+		 * specified, otherwise value is an array of per-CPU values.
+		 */
+		if (!(map_flags & BPF_F_ALL_CPUS))
+			off += size;
 	}
+unlock:
 	rcu_read_unlock();
 	return 0;
 }
kernel/bpf/syscall.c +1 -1
index f336ca1f48d9b..c227994c065ff 100644
@@ -320,7 +320,7 @@ static int bpf_map_copy_value(struct bpf_map *map, void *key, void *value,
 	} else if (map->map_type == BPF_MAP_TYPE_PERCPU_ARRAY) {
 		err = bpf_percpu_array_copy(map, key, value, flags);
 	} else if (map->map_type == BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE) {
-		err = bpf_percpu_cgroup_storage_copy(map, key, value);
+		err = bpf_percpu_cgroup_storage_copy(map, key, value, flags);
 	} else if (map->map_type == BPF_MAP_TYPE_STACK_TRACE) {
 		err = bpf_stackmap_copy(map, key, value);
 	} else if (IS_FD_ARRAY(map) || IS_FD_PROG_ARRAY(map)) {
Signature · 1 line
2.50.1
author
#10 lore raw

PATCH v8 6/7 libbpf: Add BPF_F_CPU and BPF_F_ALL_CPUS flags support for percpu maps

In reply to Leon Hwang

Add libbpf support for the BPF_F_CPU flag for percpu maps by embedding the cpu info into the high 32 bits of:

1. **flags**: bpf_map_lookup_elem_flags(), bpf_map__lookup_elem(), bpf_map_update_elem() and bpf_map__update_elem()
2. **opts->elem_flags**: bpf_map_lookup_batch() and bpf_map_update_batch()

And the flag can be BPF_F_ALL_CPUS, but cannot be
'BPF_F_CPU | BPF_F_ALL_CPUS'.

Behavior:

* If the flag is BPF_F_ALL_CPUS, the update is applied across all CPUs.
* If the flag is BPF_F_CPU, it updates value only to the specified CPU.
* If the flag is BPF_F_CPU, lookup value only from the specified CPU.
* lookup does not support BPF_F_ALL_CPUS.

---
 tools/lib/bpf/bpf.h    |  8 ++++++++
 tools/lib/bpf/libbpf.c | 26 ++++++++++++++++++++------
 tools/lib/bpf/libbpf.h | 21 ++++++++-------------
 3 files changed, 36 insertions(+), 19 deletions(-)
tools/lib/bpf/bpf.h +8 -0
index e983a3e40d612..ffd93feffd71d 100644
@@ -289,6 +289,14 @@ LIBBPF_API int bpf_map_lookup_and_delete_batch(int fd, void *in_batch,
  *    Update spin_lock-ed map elements. This must be
  *    specified if the map value contains a spinlock.
  *
+ * **BPF_F_CPU**
+ *    As for percpu maps, update value on the specified CPU. And the cpu
+ *    info is embedded into the high 32 bits of **opts->elem_flags**.
+ *
+ * **BPF_F_ALL_CPUS**
+ *    As for percpu maps, update value across all CPUs. This flag cannot
+ *    be used with BPF_F_CPU at the same time.
+ *
  * @param fd BPF map file descriptor
  * @param keys pointer to an array of *count* keys
  * @param values pointer to an array of *count* values
tools/lib/bpf/libbpf.c +20 -6
index 5161c2b398753..61983c603fa17 100644
@@ -10675,7 +10675,7 @@ bpf_object__find_map_fd_by_name(const struct bpf_object *obj, const char *name)
 }
 
 static int validate_map_op(const struct bpf_map *map, size_t key_sz,
-			   size_t value_sz, bool check_value_sz)
+			   size_t value_sz, bool check_value_sz, __u64 flags)
 {
 	if (!map_is_created(map)) /* map is not yet created */
 		return -ENOENT;
@@ -10702,6 +10702,20 @@ static int validate_map_op(const struct bpf_map *map, size_t key_sz,
 		int num_cpu = libbpf_num_possible_cpus();
 		size_t elem_sz = roundup(map->def.value_size, 8);
 
+		if (flags & (BPF_F_CPU | BPF_F_ALL_CPUS)) {
+			if ((flags & BPF_F_CPU) && (flags & BPF_F_ALL_CPUS)) {
+				pr_warn("map '%s': BPF_F_CPU and BPF_F_ALL_CPUS are mutually exclusive\n",
+					map->name);
+				return -EINVAL;
+			}
+			if (value_sz != elem_sz) {
+				pr_warn("map '%s': unexpected value size %zu provided for per-CPU map, expected %zu\n",
+					map->name, value_sz, elem_sz);
+				return -EINVAL;
+			}
+			break;
+		}
+
 		if (value_sz != num_cpu * elem_sz) {
 			pr_warn("map '%s': unexpected value size %zu provided for per-CPU map, expected %d * %zu = %zd\n",
 				map->name, value_sz, num_cpu, elem_sz, num_cpu * elem_sz);
@@ -10726,7 +10740,7 @@ int bpf_map__lookup_elem(const struct bpf_map *map,
 {
 	int err;
 
-	err = validate_map_op(map, key_sz, value_sz, true);
+	err = validate_map_op(map, key_sz, value_sz, true, flags);
 	if (err)
 		return libbpf_err(err);
 
@@ -10739,7 +10753,7 @@ int bpf_map__update_elem(const struct bpf_map *map,
 {
 	int err;
 
-	err = validate_map_op(map, key_sz, value_sz, true);
+	err = validate_map_op(map, key_sz, value_sz, true, flags);
 	if (err)
 		return libbpf_err(err);
 
@@ -10751,7 +10765,7 @@ int bpf_map__delete_elem(const struct bpf_map *map,
 {
 	int err;
 
-	err = validate_map_op(map, key_sz, 0, false /* check_value_sz */);
+	err = validate_map_op(map, key_sz, 0, false /* check_value_sz */, flags);
 	if (err)
 		return libbpf_err(err);
 
@@ -10764,7 +10778,7 @@ int bpf_map__lookup_and_delete_elem(const struct bpf_map *map,
 {
 	int err;
 
-	err = validate_map_op(map, key_sz, value_sz, true);
+	err = validate_map_op(map, key_sz, value_sz, true, flags);
 	if (err)
 		return libbpf_err(err);
 
@@ -10776,7 +10790,7 @@ int bpf_map__get_next_key(const struct bpf_map *map,
 {
 	int err;
 
-	err = validate_map_op(map, key_sz, 0, false /* check_value_sz */);
+	err = validate_map_op(map, key_sz, 0, false /* check_value_sz */, 0);
 	if (err)
 		return libbpf_err(err);
 
tools/lib/bpf/libbpf.h +8 -13
index 5118d0a90e243..8c06a5cb7569f 100644
@@ -1196,12 +1196,13 @@ LIBBPF_API struct bpf_map *bpf_map__inner_map(struct bpf_map *map);
  * @param key_sz size in bytes of key data, needs to match BPF map definition's **key_size**
  * @param value pointer to memory in which looked up value will be stored
  * @param value_sz size in byte of value data memory; it has to match BPF map
- * definition's **value_size**. For per-CPU BPF maps value size has to be
- * a product of BPF map value size and number of possible CPUs in the system
- * (could be fetched with **libbpf_num_possible_cpus()**). Note also that for
- * per-CPU values value size has to be aligned up to closest 8 bytes for
- * alignment reasons, so expected size is: `round_up(value_size, 8)
- * * libbpf_num_possible_cpus()`.
+ * definition's **value_size**. For per-CPU BPF maps, value size can be
+ * `round_up(value_size, 8)` if either **BPF_F_CPU** or **BPF_F_ALL_CPUS** is
+ * specified in **flags**, otherwise a product of BPF map value size and number
+ * of possible CPUs in the system (could be fetched with
+ * **libbpf_num_possible_cpus()**). Note also that for per-CPU values value
+ * size has to be aligned up to closest 8 bytes, so expected size is:
+ * `round_up(value_size, 8) * libbpf_num_possible_cpus()`.
  * @flags extra flags passed to kernel for this operation
  * @return 0, on success; negative error, otherwise
  *
@@ -1219,13 +1220,7 @@ LIBBPF_API int bpf_map__lookup_elem(const struct bpf_map *map,
  * @param key pointer to memory containing bytes of the key
  * @param key_sz size in bytes of key data, needs to match BPF map definition's **key_size**
  * @param value pointer to memory containing bytes of the value
- * @param value_sz size in byte of value data memory; it has to match BPF map
- * definition's **value_size**. For per-CPU BPF maps value size has to be
- * a product of BPF map value size and number of possible CPUs in the system
- * (could be fetched with **libbpf_num_possible_cpus()**). Note also that for
- * per-CPU values value size has to be aligned up to closest 8 bytes for
- * alignment reasons, so expected size is: `round_up(value_size, 8)
- * * libbpf_num_possible_cpus()`.
+ * @param value_sz refer to **bpf_map__lookup_elem**'s description.'
  * @flags extra flags passed to kernel for this operation
  * @return 0, on success; negative error, otherwise
  *
Signature · 1 line
2.50.1
author
#12 lore raw

PATCH v8 7/7 selftests/bpf: Add cases to test BPF_F_CPU and BPF_F_ALL_CPUS flags

In reply to Leon Hwang

Add test coverage for the new BPF_F_CPU and BPF_F_ALL_CPUS flags support in percpu maps. The following APIs are exercised:

* bpf_map_update_batch()
* bpf_map_lookup_batch()
* bpf_map_update_elem()
* bpf_map__update_elem()
* bpf_map_lookup_elem_flags()
* bpf_map__lookup_elem()

---
 .../selftests/bpf/prog_tests/percpu_alloc.c   | 234 ++++++++++++++++++
 .../selftests/bpf/progs/percpu_alloc_array.c  |  32 +++
 2 files changed, 266 insertions(+)
tools/testing/selftests/bpf/prog_tests/percpu_alloc.c +234 -0
index 343da65864d6d..69f881a8cfc47 100644
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <test_progs.h>
+#include "cgroup_helpers.h"
 #include "percpu_alloc_array.skel.h"
 #include "percpu_alloc_cgrp_local_storage.skel.h"
 #include "percpu_alloc_fail.skel.h"
@@ -115,6 +116,231 @@ static void test_failure(void) {
 	RUN_TESTS(percpu_alloc_fail);
 }
 
+static void test_percpu_map_op_cpu_flag(struct bpf_map *map, void *keys, size_t key_sz,
+					u32 max_entries, bool test_batch)
+{
+	int i, j, cpu, map_fd, value_size, nr_cpus, err;
+	u64 *values = NULL, batch = 0, flags;
+	const u64 value = 0xDEADC0DE;
+	size_t value_sz = sizeof(u64);
+	u32 count = max_entries;
+	LIBBPF_OPTS(bpf_map_batch_opts, batch_opts);
+
+	nr_cpus = libbpf_num_possible_cpus();
+	if (!ASSERT_GT(nr_cpus, 0, "libbpf_num_possible_cpus"))
+		return;
+
+	value_size = value_sz * nr_cpus;
+	values = calloc(max_entries, value_size);
+	if (!ASSERT_OK_PTR(values, "calloc values"))
+		goto out;
+	memset(values, 0, value_size * max_entries);
+
+	map_fd = bpf_map__fd(map);
+	flags = BPF_F_CPU | BPF_F_ALL_CPUS;
+	err = bpf_map_lookup_elem_flags(map_fd, keys, values, flags);
+	if (!ASSERT_ERR(err, "bpf_map_lookup_elem_flags err"))
+		goto out;
+
+	err = bpf_map_update_elem(map_fd, keys, values, flags);
+	if (!ASSERT_ERR(err, "bpf_map_update_elem err"))
+		goto out;
+
+	flags = (u64)nr_cpus << 32 | BPF_F_CPU;
+	err = bpf_map_update_elem(map_fd, keys, values, flags);
+	if (!ASSERT_EQ(err, -ERANGE, "bpf_map_update_elem -ERANGE"))
+		goto out;
+
+	err = bpf_map__update_elem(map, keys, key_sz, values, value_sz, flags);
+	if (!ASSERT_EQ(err, -ERANGE, "bpf_map__update_elem -ERANGE"))
+		goto out;
+
+	err = bpf_map_lookup_elem_flags(map_fd, keys, values, flags);
+	if (!ASSERT_EQ(err, -ERANGE, "bpf_map_lookup_elem_flags -ERANGE"))
+		goto out;
+
+	err = bpf_map__lookup_elem(map, keys, key_sz, values, value_sz, flags);
+	if (!ASSERT_EQ(err, -ERANGE, "bpf_map__lookup_elem -ERANGE"))
+		goto out;
+
+	for (cpu = 0; cpu < nr_cpus; cpu++) {
+		/* clear value on all cpus */
+		values[0] = 0;
+		flags = BPF_F_ALL_CPUS;
+		for (i = 0; i < max_entries; i++) {
+			err = bpf_map__update_elem(map, keys + i * key_sz, key_sz, values,
+						   value_sz, flags);
+			if (!ASSERT_OK(err, "bpf_map__update_elem all_cpus"))
+				goto out;
+		}
+
+		/* update value on specified cpu */
+		for (i = 0; i < max_entries; i++) {
+			values[0] = value;
+			flags = (u64)cpu << 32 | BPF_F_CPU;
+			err = bpf_map__update_elem(map, keys + i * key_sz, key_sz, values,
+						   value_sz, flags);
+			if (!ASSERT_OK(err, "bpf_map__update_elem specified cpu"))
+				goto out;
+
+			/* lookup then check value on CPUs */
+			for (j = 0; j < nr_cpus; j++) {
+				flags = (u64)j << 32 | BPF_F_CPU;
+				err = bpf_map__lookup_elem(map, keys + i * key_sz, key_sz, values,
+							   value_sz, flags);
+				if (!ASSERT_OK(err, "bpf_map__lookup_elem specified cpu"))
+					goto out;
+				if (!ASSERT_EQ(values[0], j != cpu ? 0 : value,
+					       "bpf_map__lookup_elem value on specified cpu"))
+					goto out;
+			}
+		}
+	}
+
+	if (!test_batch)
+		goto out;
+
+	batch_opts.elem_flags = (u64)nr_cpus << 32 | BPF_F_CPU;
+	err = bpf_map_update_batch(map_fd, keys, values, &max_entries, &batch_opts);
+	if (!ASSERT_EQ(err, -ERANGE, "bpf_map_update_batch -ERANGE"))
+		goto out;
+
+	for (cpu = 0; cpu < nr_cpus; cpu++) {
+		memset(values, 0, max_entries * value_size);
+
+		/* clear values across all CPUs */
+		batch_opts.elem_flags = BPF_F_ALL_CPUS;
+		err = bpf_map_update_batch(map_fd, keys, values, &max_entries, &batch_opts);
+		if (!ASSERT_OK(err, "bpf_map_update_batch all_cpus"))
+			goto out;
+
+		/* update values on specified CPU */
+		for (i = 0; i < max_entries; i++)
+			values[i] = value;
+
+		batch_opts.elem_flags = (u64)cpu << 32 | BPF_F_CPU;
+		err = bpf_map_update_batch(map_fd, keys, values, &max_entries, &batch_opts);
+		if (!ASSERT_OK(err, "bpf_map_update_batch specified cpu"))
+			goto out;
+
+		/* lookup values on specified CPU */
+		memset(values, 0, max_entries * value_sz);
+		err = bpf_map_lookup_batch(map_fd, NULL, &batch, keys, values, &count, &batch_opts);
+		if (!ASSERT_TRUE(!err || err == -ENOENT, "bpf_map_lookup_batch specified cpu"))
+			goto out;
+
+		for (i = 0; i < max_entries; i++)
+			if (!ASSERT_EQ(values[i], value,
+				       "bpf_map_lookup_batch value on specified cpu"))
+				goto out;
+
+		/* lookup values from all CPUs */
+		batch_opts.elem_flags = 0;
+		memset(values, 0, max_entries * value_size);
+		err = bpf_map_lookup_batch(map_fd, NULL, &batch, keys, values, &count, &batch_opts);
+		if (!ASSERT_TRUE(!err || err == -ENOENT, "bpf_map_lookup_batch all_cpus"))
+			goto out;
+
+		for (i = 0; i < max_entries; i++) {
+			for (j = 0; j < nr_cpus; j++) {
+				if (!ASSERT_EQ(values[i*nr_cpus + j], j != cpu ? 0 : value,
+					       "bpf_map_lookup_batch value all_cpus"))
+					goto out;
+			}
+		}
+	}
+
+out:
+	if (values)
+		free(values);
+}
+
+static void test_percpu_map_cpu_flag(enum bpf_map_type map_type)
+{
+	struct percpu_alloc_array *skel;
+	size_t key_sz = sizeof(int);
+	int *keys = NULL, i, err;
+	struct bpf_map *map;
+	u32 max_entries;
+
+	skel = percpu_alloc_array__open();
+	if (!ASSERT_OK_PTR(skel, "percpu_alloc_array__open"))
+		return;
+
+	map = skel->maps.percpu;
+	bpf_map__set_type(map, map_type);
+
+	err = percpu_alloc_array__load(skel);
+	if (!ASSERT_OK(err, "test_percpu_alloc__load"))
+		goto out;
+
+	max_entries = bpf_map__max_entries(map);
+	keys = calloc(max_entries, key_sz);
+	if (!ASSERT_OK_PTR(keys, "calloc keys"))
+		goto out;
+
+	for (i = 0; i < max_entries; i++)
+		keys[i] = i;
+
+	test_percpu_map_op_cpu_flag(map, keys, key_sz, max_entries, true);
+out:
+	if (keys)
+		free(keys);
+	percpu_alloc_array__destroy(skel);
+}
+
+static void test_percpu_array_cpu_flag(void)
+{
+	test_percpu_map_cpu_flag(BPF_MAP_TYPE_PERCPU_ARRAY);
+}
+
+static void test_percpu_hash_cpu_flag(void)
+{
+	test_percpu_map_cpu_flag(BPF_MAP_TYPE_PERCPU_HASH);
+}
+
+static void test_lru_percpu_hash_cpu_flag(void)
+{
+	test_percpu_map_cpu_flag(BPF_MAP_TYPE_LRU_PERCPU_HASH);
+}
+
+static void test_percpu_cgroup_storage_cpu_flag(void)
+{
+	struct bpf_cgroup_storage_key key;
+	struct percpu_alloc_array *skel;
+	int cgroup = -1, prog_fd, err;
+	struct bpf_map *map;
+
+	skel = percpu_alloc_array__open_and_load();
+	if (!ASSERT_OK_PTR(skel, "percpu_alloc_array__open_and_load"))
+		return;
+
+	cgroup = create_and_get_cgroup("/cg_percpu");
+	if (!ASSERT_GE(cgroup, 0, "create_and_get_cgroup"))
+		goto out;
+
+	err = join_cgroup("/cg_percpu");
+	if (!ASSERT_OK(err, "join_cgroup"))
+		goto out;
+
+	prog_fd = bpf_program__fd(skel->progs.cgroup_egress);
+	err = bpf_prog_attach(prog_fd, cgroup, BPF_CGROUP_INET_EGRESS, 0);
+	if (!ASSERT_OK(err, "bpf_prog_attach"))
+		goto out;
+
+	map = skel->maps.percpu_cgroup_storage;
+	err = bpf_map_get_next_key(bpf_map__fd(map), NULL, &key);
+	if (!ASSERT_OK(err, "bpf_map_get_next_key"))
+		goto out;
+
+	test_percpu_map_op_cpu_flag(map, &key, sizeof(key), 1, false);
+out:
+	bpf_prog_detach2(-1, cgroup, BPF_CGROUP_INET_EGRESS);
+	close(cgroup);
+	cleanup_cgroup_environment();
+	percpu_alloc_array__destroy(skel);
+}
+
 void test_percpu_alloc(void)
 {
 	if (test__start_subtest("array"))
@@ -125,4 +351,12 @@ void test_percpu_alloc(void)
 		test_cgrp_local_storage();
 	if (test__start_subtest("failure_tests"))
 		test_failure();
+	if (test__start_subtest("cpu_flag_percpu_array"))
+		test_percpu_array_cpu_flag();
+	if (test__start_subtest("cpu_flag_percpu_hash"))
+		test_percpu_hash_cpu_flag();
+	if (test__start_subtest("cpu_flag_lru_percpu_hash"))
+		test_lru_percpu_hash_cpu_flag();
+	if (test__start_subtest("cpu_flag_percpu_cgroup_storage"))
+		test_percpu_cgroup_storage_cpu_flag();
 }
tools/testing/selftests/bpf/progs/percpu_alloc_array.c +32 -0
index 37c2d2608ec0b..427301909c349 100644
@@ -187,4 +187,36 @@ int BPF_PROG(test_array_map_10)
 	return 0;
 }
 
+struct {
+	__uint(type, BPF_MAP_TYPE_PERCPU_ARRAY);
+	__uint(max_entries, 2);
+	__type(key, int);
+	__type(value, u64);
+} percpu SEC(".maps");
+
+SEC("?fentry/bpf_fentry_test1")
+int BPF_PROG(test_percpu_array, int x)
+{
+	u64 value = 0xDEADC0DE;
+	int key = 0;
+
+	bpf_map_update_elem(&percpu, &key, &value, BPF_ANY);
+	return 0;
+}
+
+struct {
+	__uint(type, BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE);
+	__type(key, struct bpf_cgroup_storage_key);
+	__type(value, u64);
+} percpu_cgroup_storage SEC(".maps");
+
+SEC("cgroup_skb/egress")
+int cgroup_egress(struct __sk_buff *skb)
+{
+	u64 *val = bpf_get_local_storage(&percpu_cgroup_storage, 0);
+
+	__sync_fetch_and_add(val, 1);
+	return 1;
+}
+
 char _license[] SEC("license") = "GPL";
Signature · 1 line
2.50.1
#3 lore raw

Re: [PATCH bpf-next v8 2/7] bpf: Introduce BPF_F_CPU and BPF_F_ALL_CPUS flags

In reply to Leon Hwang
Quoted 20 lines · Leon Hwang

Introduce BPF_F_CPU and BPF_F_ALL_CPUS flags and check them for following APIs:

* 'map_lookup_elem()'
* 'map_update_elem()'
* 'generic_map_lookup_batch()'
* 'generic_map_update_batch()'

And, get the correct value size for these APIs.

---
 include/linux/bpf.h            | 23 ++++++++++++++++++++++-
 include/uapi/linux/bpf.h       |  2 ++
 kernel/bpf/syscall.c           | 31 +++++++++++++++++--------------
 tools/include/uapi/linux/bpf.h |  2 ++
 4 files changed, 43 insertions(+), 15 deletions(-)

[...]

Quoted 8 lines
kernel/bpf/syscall.c +0 -0
index 84261a0211c51..d1bbc309b62ff 100644
@@ -133,12 +133,14 @@ bool bpf_map_write_active(const struct bpf_map *map)
        return atomic64_read(&map->writecnt) != 0;
 }
 

kernel/bpf/syscall.c bool bpf_map_write_active(const struct bpf_map *map) · line 139

Quoted 10 lines
kernel/bpf/syscall.c +4 -6
-static u32 bpf_map_value_size(const struct bpf_map *map)
-{
-       if (map->map_type == BPF_MAP_TYPE_PERCPU_HASH ||
-           map->map_type == BPF_MAP_TYPE_LRU_PERCPU_HASH ||
-           map->map_type == BPF_MAP_TYPE_PERCPU_ARRAY ||
-           map->map_type == BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE)
+static u32 bpf_map_value_size(const struct bpf_map *map, u64 flags)
+{
+       if (flags & (BPF_F_CPU | BPF_F_ALL_CPUS))
+               return round_up(map->value_size, 8);

with the idea that BPF_F_CPU (and BPF_F_ALL_CPUS for updates) turns per-CPU lookup/update into a singular non-per-CPU lookup, shouldn't this be just return map->value_size;?

pw-bot: cr

Quoted 7 lines
kernel/bpf/syscall.c +4 -0
+       else if (map->map_type == BPF_MAP_TYPE_PERCPU_HASH ||
+                map->map_type == BPF_MAP_TYPE_LRU_PERCPU_HASH ||
+                map->map_type == BPF_MAP_TYPE_PERCPU_ARRAY ||
+                map->map_type == BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE)
                return round_up(map->value_size, 8) * num_possible_cpus();
        else if (IS_FD_MAP(map))
                return sizeof(u32);

[...]

#7 lore raw

Re: [PATCH bpf-next v8 5/7] bpf: Add BPF_F_CPU and BPF_F_ALL_CPUS flags support for percpu_cgroup_storage maps

In reply to Leon Hwang
Quoted 21 lines · Leon Hwang

Introduce BPF_F_ALL_CPUS flag support for percpu_cgroup_storage maps to allow updating values for all CPUs with a single value for update_elem API.

Introduce BPF_F_CPU flag support for percpu_cgroup_storage maps to allow:

* update value for specified CPU for update_elem API.
* lookup value for specified CPU for lookup_elem API.

The BPF_F_CPU flag is passed via map_flags along with embedded cpu info.

---
 include/linux/bpf-cgroup.h |  4 ++--
 include/linux/bpf.h        |  1 +
 kernel/bpf/local_storage.c | 22 +++++++++++++++++++---
 kernel/bpf/syscall.c       |  2 +-
 4 files changed, 23 insertions(+), 6 deletions(-)

[...]

kernel/bpf/local_storage.c int bpf_percpu_cgroup_storage_copy(struct bpf_map *_map, void *key, · line 201

Quoted 10 lines

int bpf_percpu_cgroup_storage_copy(struct bpf_map *_map, void *key,

kernel/bpf/local_storage.c +1 -1
-                                  void *value)
+                                  void *value, u64 map_flags)
 {
        struct bpf_cgroup_storage_map *map = map_to_storage(_map);
        struct bpf_cgroup_storage *storage;
@@ -199,11 +199,17 @@ int bpf_percpu_cgroup_storage_copy(struct bpf_map *_map, void *key,
         * will not leak any kernel data
         */
        size = round_up(_map->value_size, 8);

um... same issue with rounding up value_size when BPF_F_CPU is set, no?

Quoted 24 lines
kernel/bpf/local_storage.c +7 -1
+       if (map_flags & BPF_F_CPU) {
+               cpu = map_flags >> 32;
+               bpf_long_memcpy(value, per_cpu_ptr(storage->percpu_buf, cpu), size);
+               goto unlock;
+       }
        for_each_possible_cpu(cpu) {
                bpf_long_memcpy(value + off,
                                per_cpu_ptr(storage->percpu_buf, cpu), size);
                off += size;
        }
+unlock:
        rcu_read_unlock();
        return 0;
 }
@@ -216,7 +222,7 @@ int bpf_percpu_cgroup_storage_update(struct bpf_map *_map, void *key,
        int cpu, off = 0;
        u32 size;
 
-       if (map_flags != BPF_ANY && map_flags != BPF_EXIST)
+       if ((u32)map_flags & ~(BPF_ANY | BPF_EXIST | BPF_F_CPU | BPF_F_ALL_CPUS))
                return -EINVAL;
 
        rcu_read_lock();

kernel/bpf/local_storage.c int bpf_percpu_cgroup_storage_update(struct bpf_map *_map, void *key, · line 244

Quoted 6 lines
kernel/bpf/local_storage.c +3 -0
@@ -233,11 +239,21 @@ int bpf_percpu_cgroup_storage_update(struct bpf_map *_map, void *key,
         * so no kernel data leaks possible
         */
        size = round_up(_map->value_size, 8);
+       if (map_flags & BPF_F_CPU) {
+               cpu = map_flags >> 32;
+               bpf_long_memcpy(per_cpu_ptr(storage->percpu_buf, cpu), value, size);

ditto

kernel/bpf/local_storage.c int bpf_percpu_cgroup_storage_update(struct bpf_map *_map, void *key, · line 254

Quoted 11 lines
kernel/bpf/local_storage.c +7 -1
+               goto unlock;
+       }
        for_each_possible_cpu(cpu) {
                bpf_long_memcpy(per_cpu_ptr(storage->percpu_buf, cpu),
                                value + off, size);
-               off += size;
+               /* same user-provided value is used if BPF_F_ALL_CPUS is
+                * specified, otherwise value is an array of per-CPU values.
+                */
+               if (!(map_flags & BPF_F_ALL_CPUS))
+                       off += size;

btw, given we'll need another revision to fix up all those round_up() issues, what do you think about make this offset logic completely stateless (and, in my opinion, more obvious):

for_each_possible_cpu(cpu) {
    p = (map_flags & BPF_F_ALL_CPUS) ? value : value + size * cpu;
    memcpy(per_cpu_ptr(storage->percpu_buf, cpu), p, size);
}

seems more straightforward to me

P.S. And please update this everywhere for consistency ;)

Quoted 21 lines
kernel/bpf/local_storage.c +1 -0
        }
+unlock:
        rcu_read_unlock();
        return 0;
 }
kernel/bpf/syscall.c +1 -2
index f336ca1f48d9b..c227994c065ff 100644
@@ -320,7 +320,7 @@ static int bpf_map_copy_value(struct bpf_map *map, void *key, void *value,
        } else if (map->map_type == BPF_MAP_TYPE_PERCPU_ARRAY) {
                err = bpf_percpu_array_copy(map, key, value, flags);
        } else if (map->map_type == BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE) {
-               err = bpf_percpu_cgroup_storage_copy(map, key, value);
+               err = bpf_percpu_cgroup_storage_copy(map, key, value, flags);
        } else if (map->map_type == BPF_MAP_TYPE_STACK_TRACE) {
                err = bpf_stackmap_copy(map, key, value);
        } else if (IS_FD_ARRAY(map) || IS_FD_PROG_ARRAY(map)) {
--

2.50.1

#11 lore raw

Re: [PATCH bpf-next v8 6/7] libbpf: Add BPF_F_CPU and BPF_F_ALL_CPUS flags support for percpu maps

In reply to Leon Hwang
Quoted 27 lines · Leon Hwang

Add libbpf support for the BPF_F_CPU flag for percpu maps by embedding the cpu info into the high 32 bits of:

1. **flags**: bpf_map_lookup_elem_flags(), bpf_map__lookup_elem(), bpf_map_update_elem() and bpf_map__update_elem()
2. **opts->elem_flags**: bpf_map_lookup_batch() and bpf_map_update_batch()

And the flag can be BPF_F_ALL_CPUS, but cannot be
'BPF_F_CPU | BPF_F_ALL_CPUS'.

Behavior:

* If the flag is BPF_F_ALL_CPUS, the update is applied across all CPUs.
* If the flag is BPF_F_CPU, it updates value only to the specified CPU.
* If the flag is BPF_F_CPU, lookup value only from the specified CPU.
* lookup does not support BPF_F_ALL_CPUS.

---
 tools/lib/bpf/bpf.h    |  8 ++++++++
 tools/lib/bpf/libbpf.c | 26 ++++++++++++++++++++------
 tools/lib/bpf/libbpf.h | 21 ++++++++-------------
 3 files changed, 36 insertions(+), 19 deletions(-)

[...]

Quoted 6 lines
tools/lib/bpf/libbpf.h +0 -0
index 5118d0a90e243..8c06a5cb7569f 100644
@@ -1196,12 +1196,13 @@ LIBBPF_API struct bpf_map *bpf_map__inner_map(struct bpf_map *map);
  * @param key_sz size in bytes of key data, needs to match BPF map definition's **key_size**

tools/lib/bpf/libbpf.h LIBBPF_API struct bpf_map *bpf_map__inner_map(struct bpf_map *map); · line 1200

Quoted 10 lines
tools/lib/bpf/libbpf.h +2 -6
  * @param value pointer to memory in which looked up value will be stored
  * @param value_sz size in byte of value data memory; it has to match BPF map
- * definition's **value_size**. For per-CPU BPF maps value size has to be
- * a product of BPF map value size and number of possible CPUs in the system
- * (could be fetched with **libbpf_num_possible_cpus()**). Note also that for
- * per-CPU values value size has to be aligned up to closest 8 bytes for
- * alignment reasons, so expected size is: `round_up(value_size, 8)
- * * libbpf_num_possible_cpus()`.
+ * definition's **value_size**. For per-CPU BPF maps, value size can be
+ * `round_up(value_size, 8)` if either **BPF_F_CPU** or **BPF_F_ALL_CPUS** is

please update, it's not round_up(), as we decided earlier

Quoted 26 lines
tools/lib/bpf/libbpf.h +6 -8
+ * specified in **flags**, otherwise a product of BPF map value size and number
+ * of possible CPUs in the system (could be fetched with
+ * **libbpf_num_possible_cpus()**). Note also that for per-CPU values value
+ * size has to be aligned up to closest 8 bytes, so expected size is:
+ * `round_up(value_size, 8) * libbpf_num_possible_cpus()`.
  * @flags extra flags passed to kernel for this operation
  * @return 0, on success; negative error, otherwise
  *
@@ -1219,13 +1220,7 @@ LIBBPF_API int bpf_map__lookup_elem(const struct bpf_map *map,
  * @param key pointer to memory containing bytes of the key
  * @param key_sz size in bytes of key data, needs to match BPF map definition's **key_size**
  * @param value pointer to memory containing bytes of the value
- * @param value_sz size in byte of value data memory; it has to match BPF map
- * definition's **value_size**. For per-CPU BPF maps value size has to be
- * a product of BPF map value size and number of possible CPUs in the system
- * (could be fetched with **libbpf_num_possible_cpus()**). Note also that for
- * per-CPU values value size has to be aligned up to closest 8 bytes for
- * alignment reasons, so expected size is: `round_up(value_size, 8)
- * * libbpf_num_possible_cpus()`.
+ * @param value_sz refer to **bpf_map__lookup_elem**'s description.'
  * @flags extra flags passed to kernel for this operation
  * @return 0, on success; negative error, otherwise
  *
--

2.50.1

author
#8 lore raw

Re: [PATCH bpf-next v8 5/7] bpf: Add BPF_F_CPU and BPF_F_ALL_CPUS flags support for percpu_cgroup_storage maps

In reply to Andrii Nakryiko
Quoted 87 lines · Andrii Nakryiko
Quoted 21 lines · Leon Hwang

Introduce BPF_F_ALL_CPUS flag support for percpu_cgroup_storage maps to allow updating values for all CPUs with a single value for update_elem API.

Introduce BPF_F_CPU flag support for percpu_cgroup_storage maps to allow:

* update value for specified CPU for update_elem API.
* lookup value for specified CPU for lookup_elem API.

The BPF_F_CPU flag is passed via map_flags along with embedded cpu info.

---
 include/linux/bpf-cgroup.h |  4 ++--
 include/linux/bpf.h        |  1 +
 kernel/bpf/local_storage.c | 22 +++++++++++++++++++---
 kernel/bpf/syscall.c       |  2 +-
 4 files changed, 23 insertions(+), 6 deletions(-)

[...]

kernel/bpf/local_storage.c int bpf_percpu_cgroup_storage_copy(struct bpf_map *_map, void *key, · line 201

Quoted 10 lines

int bpf_percpu_cgroup_storage_copy(struct bpf_map *_map, void *key,

kernel/bpf/local_storage.c +1 -1
-                                  void *value)
+                                  void *value, u64 map_flags)
 {
        struct bpf_cgroup_storage_map *map = map_to_storage(_map);
        struct bpf_cgroup_storage *storage;
@@ -199,11 +199,17 @@ int bpf_percpu_cgroup_storage_copy(struct bpf_map *_map, void *key,
         * will not leak any kernel data
         */
        size = round_up(_map->value_size, 8);

um... same issue with rounding up value_size when BPF_F_CPU is set, no?

Quoted 24 lines
kernel/bpf/local_storage.c +7 -1
+       if (map_flags & BPF_F_CPU) {
+               cpu = map_flags >> 32;
+               bpf_long_memcpy(value, per_cpu_ptr(storage->percpu_buf, cpu), size);
+               goto unlock;
+       }
        for_each_possible_cpu(cpu) {
                bpf_long_memcpy(value + off,
                                per_cpu_ptr(storage->percpu_buf, cpu), size);
                off += size;
        }
+unlock:
        rcu_read_unlock();
        return 0;
 }
@@ -216,7 +222,7 @@ int bpf_percpu_cgroup_storage_update(struct bpf_map *_map, void *key,
        int cpu, off = 0;
        u32 size;
 
-       if (map_flags != BPF_ANY && map_flags != BPF_EXIST)
+       if ((u32)map_flags & ~(BPF_ANY | BPF_EXIST | BPF_F_CPU | BPF_F_ALL_CPUS))
                return -EINVAL;
 
        rcu_read_lock();

kernel/bpf/local_storage.c int bpf_percpu_cgroup_storage_update(struct bpf_map *_map, void *key, · line 244

Quoted 6 lines
kernel/bpf/local_storage.c +3 -0
@@ -233,11 +239,21 @@ int bpf_percpu_cgroup_storage_update(struct bpf_map *_map, void *key,
         * so no kernel data leaks possible
         */
        size = round_up(_map->value_size, 8);
+       if (map_flags & BPF_F_CPU) {
+               cpu = map_flags >> 32;
+               bpf_long_memcpy(per_cpu_ptr(storage->percpu_buf, cpu), value, size);

ditto

kernel/bpf/local_storage.c int bpf_percpu_cgroup_storage_update(struct bpf_map *_map, void *key, · line 254

Quoted 11 lines
kernel/bpf/local_storage.c +7 -1
+               goto unlock;
+       }
        for_each_possible_cpu(cpu) {
                bpf_long_memcpy(per_cpu_ptr(storage->percpu_buf, cpu),
                                value + off, size);
-               off += size;
+               /* same user-provided value is used if BPF_F_ALL_CPUS is
+                * specified, otherwise value is an array of per-CPU values.
+                */
+               if (!(map_flags & BPF_F_ALL_CPUS))
+                       off += size;

btw, given we'll need another revision to fix up all those round_up() issues, what do you think about make this offset logic completely stateless (and, in my opinion, more obvious):

Quoted 6 lines
for_each_possible_cpu(cpu) {
    p = (map_flags & BPF_F_ALL_CPUS) ? value : value + size * cpu;
    memcpy(per_cpu_ptr(storage->percpu_buf, cpu), p, size);
}

seems more straightforward to me

lgtm.

But I think the correct memcpy() should look like this:

memcpy(per_cpu_ptr(storage->percpu_buf, cpu), p,

       (map_flags & BPF_F_ALL_CPUS) ? _map->value_size : size);

because 'size' is 8-byte aligned and can’t be used directly when 'map_flags & BPF_F_ALL_CPUS' is set.

So the more accurate version would be:

for_each_possible_cpu(cpu) {
    p = (map_flags & BPF_F_ALL_CPUS) ? value : value + size * cpu;
    s = (map_flags & BPF_F_ALL_CPUS) ? _map->value_size : size;
    memcpy(per_cpu_ptr(storage->percpu_buf, cpu), p, s);
}

Isn’t this the correct approach?

Thanks,
Leon

[...]

#9 lore raw

Re: [PATCH bpf-next v8 5/7] bpf: Add BPF_F_CPU and BPF_F_ALL_CPUS flags support for percpu_cgroup_storage maps

Quoted 110 lines · Leon Hwang
Quoted 87 lines · Andrii Nakryiko
Quoted 21 lines · Leon Hwang

Introduce BPF_F_ALL_CPUS flag support for percpu_cgroup_storage maps to allow updating values for all CPUs with a single value for update_elem API.

Introduce BPF_F_CPU flag support for percpu_cgroup_storage maps to allow:

* update value for specified CPU for update_elem API.
* lookup value for specified CPU for lookup_elem API.

The BPF_F_CPU flag is passed via map_flags along with embedded cpu info.

---
 include/linux/bpf-cgroup.h |  4 ++--
 include/linux/bpf.h        |  1 +
 kernel/bpf/local_storage.c | 22 +++++++++++++++++++---
 kernel/bpf/syscall.c       |  2 +-
 4 files changed, 23 insertions(+), 6 deletions(-)

[...]

kernel/bpf/local_storage.c int bpf_percpu_cgroup_storage_copy(struct bpf_map *_map, void *key, · line 201

Quoted 10 lines

int bpf_percpu_cgroup_storage_copy(struct bpf_map *_map, void *key,

kernel/bpf/local_storage.c +1 -1
-                                  void *value)
+                                  void *value, u64 map_flags)
 {
        struct bpf_cgroup_storage_map *map = map_to_storage(_map);
        struct bpf_cgroup_storage *storage;
@@ -199,11 +199,17 @@ int bpf_percpu_cgroup_storage_copy(struct bpf_map *_map, void *key,
         * will not leak any kernel data
         */
        size = round_up(_map->value_size, 8);

um... same issue with rounding up value_size when BPF_F_CPU is set, no?

Quoted 24 lines
kernel/bpf/local_storage.c +7 -1
+       if (map_flags & BPF_F_CPU) {
+               cpu = map_flags >> 32;
+               bpf_long_memcpy(value, per_cpu_ptr(storage->percpu_buf, cpu), size);
+               goto unlock;
+       }
        for_each_possible_cpu(cpu) {
                bpf_long_memcpy(value + off,
                                per_cpu_ptr(storage->percpu_buf, cpu), size);
                off += size;
        }
+unlock:
        rcu_read_unlock();
        return 0;
 }
@@ -216,7 +222,7 @@ int bpf_percpu_cgroup_storage_update(struct bpf_map *_map, void *key,
        int cpu, off = 0;
        u32 size;
 
-       if (map_flags != BPF_ANY && map_flags != BPF_EXIST)
+       if ((u32)map_flags & ~(BPF_ANY | BPF_EXIST | BPF_F_CPU | BPF_F_ALL_CPUS))
                return -EINVAL;
 
        rcu_read_lock();

kernel/bpf/local_storage.c int bpf_percpu_cgroup_storage_update(struct bpf_map *_map, void *key, · line 244

Quoted 6 lines
kernel/bpf/local_storage.c +3 -0
@@ -233,11 +239,21 @@ int bpf_percpu_cgroup_storage_update(struct bpf_map *_map, void *key,
         * so no kernel data leaks possible
         */
        size = round_up(_map->value_size, 8);
+       if (map_flags & BPF_F_CPU) {
+               cpu = map_flags >> 32;
+               bpf_long_memcpy(per_cpu_ptr(storage->percpu_buf, cpu), value, size);

ditto

kernel/bpf/local_storage.c int bpf_percpu_cgroup_storage_update(struct bpf_map *_map, void *key, · line 254

Quoted 11 lines
kernel/bpf/local_storage.c +7 -1
+               goto unlock;
+       }
        for_each_possible_cpu(cpu) {
                bpf_long_memcpy(per_cpu_ptr(storage->percpu_buf, cpu),
                                value + off, size);
-               off += size;
+               /* same user-provided value is used if BPF_F_ALL_CPUS is
+                * specified, otherwise value is an array of per-CPU values.
+                */
+               if (!(map_flags & BPF_F_ALL_CPUS))
+                       off += size;

btw, given we'll need another revision to fix up all those round_up() issues, what do you think about make this offset logic completely stateless (and, in my opinion, more obvious):

Quoted 6 lines
for_each_possible_cpu(cpu) {
    p = (map_flags & BPF_F_ALL_CPUS) ? value : value + size * cpu;
    memcpy(per_cpu_ptr(storage->percpu_buf, cpu), p, size);
}

seems more straightforward to me

lgtm.

But I think the correct memcpy() should look like this:

memcpy(per_cpu_ptr(storage->percpu_buf, cpu), p,

       (map_flags & BPF_F_ALL_CPUS) ? _map->value_size : size);

because 'size' is 8-byte aligned and can’t be used directly when 'map_flags & BPF_F_ALL_CPUS' is set.

So the more accurate version would be:

Quoted 8 lines
for_each_possible_cpu(cpu) {
    p = (map_flags & BPF_F_ALL_CPUS) ? value : value + size * cpu;
    s = (map_flags & BPF_F_ALL_CPUS) ? _map->value_size : size;
    memcpy(per_cpu_ptr(storage->percpu_buf, cpu), p, s);
}

Isn’t this the correct approach?

Yes, but I think it would be better to update:

size = round_up(_map->value_size, 8);

to take into account BPF_F_ALL_CPUS instead and do it once outside of the loop. But same idea, of course, yes.

Quoted 4 lines

Thanks,
Leon

[...]