arm64: dts: qcom: x1-dell-thena: Add missing pinctrl for eDP HPD
PATCH 1/1 arm64: dts: qcom: x1-dell-thena: Add missing pinctrl for eDP HPD
Match the change for the XPS 13 (a41d2314) as the board is identical between the XPS and the Latitude/Inspiron.
This allows us not to rely on the boot firmware to set up the pinctrl for the eDP HPD line of the internal display.
--- arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi | 3 +++ 1 file changed, 3 insertions(+)
arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi +3 -0
@@ -1104,6 +1104,9 @@ &mdss_dp1_out { &mdss_dp3 { /delete-property/ #sound-dai-cells; + pinctrl-0 = <&edp0_hpd_default>; + pinctrl-names = "default"; + status = "okay"; aux-bus {
Signature · 1 line
2.51.0
Quoted 2 lines · Val Packett
Match the change for the XPS 13 (
a41d2314) as the board is identical between the XPS and the Latitude/Inspiron.
Same comment on the commit identification.
Also, are the boards identical ? I don't think that statement is true, say the "board DP here is identical" but there are GPIOs on the PCBs which read back different values to differentiate.
They are not identical PCBs.
Quoted 15 lines
This allows us not to rely on the boot firmware to set up the pinctrl for the eDP HPD line of the internal display.
Fixes e7733b42111c ("arm64: dts: qcom: Add support for Dell Inspiron 7441 / Latitude 7455")Signed-off-by Val Packett <[email protected]>--- arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi | 3 +++ 1 file changed, 3 insertions(+)arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi +0
-0
arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi &mdss_dp1_out { · line 1112
Quoted 9 lines
arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi +3
-0@@ -1104,6 +1104,9 @@ &mdss_dp1_out { &mdss_dp3 { /delete-property/ #sound-dai-cells; + pinctrl-0 = <&edp0_hpd_default>; + pinctrl-names = "default"; + status = "okay"; aux-bus {
Once fixed.