Skip to contentSkip to conversation

bpf: Introduce BPF_F_CPU and BPF_F_ALL_CPUS flags for percpu maps

PATCH Superseded Leon Hwang 2 participants 13 messages Sep 30, 2025 – Oct 13, 2025

Subsystems (5)
Kselftest BPF BPF selftests BPF core +1 more subsystems

v9 of 13 Superseded Latest is v13 →

lore
Share & tools
lore

Leon Hwang

author
#0 lore raw

v9 cover bpf: Introduce BPF_F_CPU and BPF_F_ALL_CPUS flags for percpu maps

This patch set introduces the BPF_F_CPU and BPF_F_ALL_CPUS flags for percpu maps, as the requirement of BPF_F_ALL_CPUS flag for percpu_array maps was discussed in the thread of
"[PATCH bpf-next v3 0/4] bpf: Introduce global percpu data"[1].

The goal of BPF_F_ALL_CPUS flag is to reduce data caching overhead in light skeletons by allowing a single value to be reused to update values across all CPUs. This avoids the M:N problem where M cached values are used to update a map on N CPUs kernel.

The BPF_F_CPU flag is accompanied by *flags*-embedded cpu info, which specifies the target CPU for the operation:

* For lookup operations: the flag field alongside cpu info enable querying a value on the specified CPU.
* For update operations: the flag field alongside cpu info enable updating value for specified CPU.

Links:
[1] https://lore.kernel.org/bpf/[email protected]/

Changes:
v8 -> v9:
* Change value type from u64 to u32 in selftests.
* Address comments from Andrii:
* Keep value_size unaligned and update everywhere for consistency when cpu flags are specified.
* Update value by getting pointer for percpu hash and percpu cgroup_storage maps.

v7 -> v8:
* Address comments from Andrii:
* Check BPF_F_LOCK when update percpu_array, percpu_hash and lru_percpu_hash maps.
* Refactor flags check in __htab_map_lookup_and_delete_batch().
* Keep value_size unaligned and copy value using copy_map_value() in __htab_map_lookup_and_delete_batch() when BPF_F_CPU is specified.
* Update warn message in libbpf's validate_map_op().
* Update comment of libbpf's bpf_map__lookup_elem().

v6 -> v7:
* Get correct value size for percpu_hash and lru_percpu_hash in update_batch API.
* Set 'count' as 'max_entries' in test cases for lookup_batch API.
* Address comment from Alexei:
* Move cpu flags check into bpf_map_check_op_flags().

v5 -> v6:
* Move bpf_map_check_op_flags() from 'bpf.h' to 'syscall.c'.
* Address comments from Alexei:
* Drop the refactoring code of data copying logic for percpu maps.
* Drop bpf_map_check_op_flags() wrappers.

v4 -> v5:
* Address comments from Andrii:
* Refactor data copying logic for all percpu maps.
* Drop this_cpu_ptr() micro-optimization.
* Drop cpu check in libbpf's validate_map_op().
* Enhance bpf_map_check_op_flags() using *allowed flags* instead of

    'extra_flags_mask'.

v3 -> v4:
* Address comments from Andrii:
* Remove unnecessary map_type check in bpf_map_value_size().
* Reduce code churn.
* Remove unnecessary do_delete check in

    __htab_map_lookup_and_delete_batch().
  * Introduce bpf_percpu_copy_to_user() and bpf_percpu_copy_from_user().
  * Rename check_map_flags() to bpf_map_check_op_flags() with
    extra_flags_mask.
  * Add human-readable pr_warn() explanations in validate_map_op().
  * Use flags in bpf_map__delete_elem() and
    bpf_map__lookup_and_delete_elem().

* Drop "for alignment reasons".
v3 link: https://lore.kernel.org/bpf/[email protected]/

v2 -> v3:
* Address comments from Alexei:
* Use BPF_F_ALL_CPUS instead of BPF_ALL_CPUS magic.
* Introduce these two cpu flags for all percpu maps.
* Address comments from Jiri:
* Reduce some unnecessary u32 cast.
* Refactor more generic map flags check function.
* A code style issue.
v2 link: https://lore.kernel.org/bpf/[email protected]/

v1 -> v2:
* Address comments from Andrii:
* Embed cpu info as high 32 bits of *flags* totally.
* Use ERANGE instead of E2BIG.
* Few format issues.

Leon Hwang (7):
bpf: Introduce internal bpf_map_check_op_flags helper function
bpf: Introduce BPF_F_CPU and BPF_F_ALL_CPUS flags
bpf: Add BPF_F_CPU and BPF_F_ALL_CPUS flags support for percpu_array
maps
bpf: Add BPF_F_CPU and BPF_F_ALL_CPUS flags support for percpu_hash
and lru_percpu_hash maps
bpf: Add BPF_F_CPU and BPF_F_ALL_CPUS flags support for
percpu_cgroup_storage maps
libbpf: Add BPF_F_CPU and BPF_F_ALL_CPUS flags support for percpu maps selftests/bpf: Add cases to test BPF_F_CPU and BPF_F_ALL_CPUS flags

 include/linux/bpf-cgroup.h                    |   4 +-
 include/linux/bpf.h                           |  44 +++-
 include/uapi/linux/bpf.h                      |   2 +
 kernel/bpf/arraymap.c                         |  25 +-
 kernel/bpf/hashtab.c                          |  82 ++++--
 kernel/bpf/local_storage.c                    |  27 +-
 kernel/bpf/syscall.c                          |  65 ++---
 tools/include/uapi/linux/bpf.h                |   2 +
 tools/lib/bpf/bpf.h                           |   8 +
 tools/lib/bpf/libbpf.c                        |  26 +-
 tools/lib/bpf/libbpf.h                        |  21 +-
 .../selftests/bpf/prog_tests/percpu_alloc.c   | 248 ++++++++++++++++++
 .../selftests/bpf/progs/percpu_alloc_array.c  |  32 +++
 13 files changed, 487 insertions(+), 99 deletions(-)

--
2.51.0

author
#1 lore raw

PATCH v9 1/7 bpf: Introduce internal bpf_map_check_op_flags helper function

It is to unify map flags checking for lookup_elem, update_elem, lookup_batch and update_batch APIs.

Therefore, it will be convenient to check BPF_F_CPU and BPF_F_ALL_CPUS flags in it for these APIs in next patch.

---
 include/linux/bpf.h  | 11 +++++++++++
 kernel/bpf/syscall.c | 34 +++++++++++-----------------------
 2 files changed, 22 insertions(+), 23 deletions(-)
include/linux/bpf.h +11 -0
index a98c833461347..fb48db5bde472 100644
@@ -3768,4 +3768,15 @@ int bpf_prog_get_file_line(struct bpf_prog *prog, unsigned long ip, const char *
 			   const char **linep, int *nump);
 struct bpf_prog *bpf_prog_find_from_stack(void);
 
+static inline int bpf_map_check_op_flags(struct bpf_map *map, u64 flags, u64 allowed_flags)
+{
+	if (flags & ~allowed_flags)
+		return -EINVAL;
+
+	if ((flags & BPF_F_LOCK) && !btf_record_has_field(map->record, BPF_SPIN_LOCK))
+		return -EINVAL;
+
+	return 0;
+}
+
 #endif /* _LINUX_BPF_H */
kernel/bpf/syscall.c +11 -23
index a48fa86f82a7f..6c252d3337928 100644
@@ -1709,9 +1709,6 @@ static int map_lookup_elem(union bpf_attr *attr)
 	if (CHECK_ATTR(BPF_MAP_LOOKUP_ELEM))
 		return -EINVAL;
 
-	if (attr->flags & ~BPF_F_LOCK)
-		return -EINVAL;
-
 	CLASS(fd, f)(attr->map_fd);
 	map = __bpf_map_get(f);
 	if (IS_ERR(map))
@@ -1719,9 +1716,9 @@ static int map_lookup_elem(union bpf_attr *attr)
 	if (!(map_get_sys_perms(map, f) & FMODE_CAN_READ))
 		return -EPERM;
 
-	if ((attr->flags & BPF_F_LOCK) &&
-	    !btf_record_has_field(map->record, BPF_SPIN_LOCK))
-		return -EINVAL;
+	err = bpf_map_check_op_flags(map, attr->flags, BPF_F_LOCK);
+	if (err)
+		return err;
 
 	key = __bpf_copy_key(ukey, map->key_size);
 	if (IS_ERR(key))
@@ -1784,11 +1781,9 @@ static int map_update_elem(union bpf_attr *attr, bpfptr_t uattr)
 		goto err_put;
 	}
 
-	if ((attr->flags & BPF_F_LOCK) &&
-	    !btf_record_has_field(map->record, BPF_SPIN_LOCK)) {
-		err = -EINVAL;
+	err = bpf_map_check_op_flags(map, attr->flags, ~0);
+	if (err)
 		goto err_put;
-	}
 
 	key = ___bpf_copy_key(ukey, map->key_size);
 	if (IS_ERR(key)) {
@@ -1992,13 +1987,9 @@ int generic_map_update_batch(struct bpf_map *map, struct file *map_file,
 	void *key, *value;
 	int err = 0;
 
-	if (attr->batch.elem_flags & ~BPF_F_LOCK)
-		return -EINVAL;
-
-	if ((attr->batch.elem_flags & BPF_F_LOCK) &&
-	    !btf_record_has_field(map->record, BPF_SPIN_LOCK)) {
-		return -EINVAL;
-	}
+	err = bpf_map_check_op_flags(map, attr->batch.elem_flags, BPF_F_LOCK);
+	if (err)
+		return err;
 
 	value_size = bpf_map_value_size(map);
 
@@ -2055,12 +2046,9 @@ int generic_map_lookup_batch(struct bpf_map *map,
 	u32 value_size, cp, max_count;
 	int err;
 
-	if (attr->batch.elem_flags & ~BPF_F_LOCK)
-		return -EINVAL;
-
-	if ((attr->batch.elem_flags & BPF_F_LOCK) &&
-	    !btf_record_has_field(map->record, BPF_SPIN_LOCK))
-		return -EINVAL;
+	err = bpf_map_check_op_flags(map, attr->batch.elem_flags, BPF_F_LOCK);
+	if (err)
+		return err;
 
 	value_size = bpf_map_value_size(map);
 
Signature · 1 line
2.51.0
author
#2 lore raw

PATCH v9 2/7 bpf: Introduce BPF_F_CPU and BPF_F_ALL_CPUS flags

In reply to Leon Hwang

Introduce BPF_F_CPU and BPF_F_ALL_CPUS flags and check them for following APIs:

* 'map_lookup_elem()'
* 'map_update_elem()'
* 'generic_map_lookup_batch()'
* 'generic_map_update_batch()'

And, get the correct value size for these APIs.

---
 include/linux/bpf.h            | 23 ++++++++++++++++++++++-
 include/uapi/linux/bpf.h       |  2 ++
 kernel/bpf/syscall.c           | 31 +++++++++++++++++--------------
 tools/include/uapi/linux/bpf.h |  2 ++
 4 files changed, 43 insertions(+), 15 deletions(-)
include/linux/bpf.h +22 -1
index fb48db5bde472..731de0efdd00e 100644
@@ -3768,14 +3768,35 @@ int bpf_prog_get_file_line(struct bpf_prog *prog, unsigned long ip, const char *
 			   const char **linep, int *nump);
 struct bpf_prog *bpf_prog_find_from_stack(void);
 
+static inline bool bpf_map_supports_cpu_flags(enum bpf_map_type map_type)
+{
+	return false;
+}
+
 static inline int bpf_map_check_op_flags(struct bpf_map *map, u64 flags, u64 allowed_flags)
 {
-	if (flags & ~allowed_flags)
+	u32 cpu;
+
+	if ((u32)flags & ~allowed_flags)
 		return -EINVAL;
 
 	if ((flags & BPF_F_LOCK) && !btf_record_has_field(map->record, BPF_SPIN_LOCK))
 		return -EINVAL;
 
+	if (!(flags & BPF_F_CPU) && flags >> 32)
+		return -EINVAL;
+
+	if (flags & (BPF_F_CPU | BPF_F_ALL_CPUS)) {
+		if (!bpf_map_supports_cpu_flags(map->map_type))
+			return -EINVAL;
+		if ((flags & BPF_F_CPU) && (flags & BPF_F_ALL_CPUS))
+			return -EINVAL;
+
+		cpu = flags >> 32;
+		if ((flags & BPF_F_CPU) && cpu >= num_possible_cpus())
+			return -ERANGE;
+	}
+
 	return 0;
 }
 
include/uapi/linux/bpf.h +2 -0
index ae83d8649ef1c..f827353424ec5 100644
@@ -1372,6 +1372,8 @@ enum {
 	BPF_NOEXIST	= 1, /* create new element if it didn't exist */
 	BPF_EXIST	= 2, /* update existing element */
 	BPF_F_LOCK	= 4, /* spin_lock-ed map_lookup/map_update */
+	BPF_F_CPU	= 8, /* cpu flag for percpu maps, upper 32-bit of flags is a cpu number */
+	BPF_F_ALL_CPUS	= 16, /* update value across all CPUs for percpu maps */
 };
 
 /* flags for BPF_MAP_CREATE command */
kernel/bpf/syscall.c +17 -14
index 6c252d3337928..8c206d46de3f5 100644
@@ -133,12 +133,14 @@ bool bpf_map_write_active(const struct bpf_map *map)
 	return atomic64_read(&map->writecnt) != 0;
 }
 
-static u32 bpf_map_value_size(const struct bpf_map *map)
-{
-	if (map->map_type == BPF_MAP_TYPE_PERCPU_HASH ||
-	    map->map_type == BPF_MAP_TYPE_LRU_PERCPU_HASH ||
-	    map->map_type == BPF_MAP_TYPE_PERCPU_ARRAY ||
-	    map->map_type == BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE)
+static u32 bpf_map_value_size(const struct bpf_map *map, u64 flags)
+{
+	if (flags & (BPF_F_CPU | BPF_F_ALL_CPUS))
+		return map->value_size;
+	else if (map->map_type == BPF_MAP_TYPE_PERCPU_HASH ||
+		 map->map_type == BPF_MAP_TYPE_LRU_PERCPU_HASH ||
+		 map->map_type == BPF_MAP_TYPE_PERCPU_ARRAY ||
+		 map->map_type == BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE)
 		return round_up(map->value_size, 8) * num_possible_cpus();
 	else if (IS_FD_MAP(map))
 		return sizeof(u32);
@@ -1716,7 +1718,7 @@ static int map_lookup_elem(union bpf_attr *attr)
 	if (!(map_get_sys_perms(map, f) & FMODE_CAN_READ))
 		return -EPERM;
 
-	err = bpf_map_check_op_flags(map, attr->flags, BPF_F_LOCK);
+	err = bpf_map_check_op_flags(map, attr->flags, BPF_F_LOCK | BPF_F_CPU);
 	if (err)
 		return err;
 
@@ -1724,7 +1726,7 @@ static int map_lookup_elem(union bpf_attr *attr)
 	if (IS_ERR(key))
 		return PTR_ERR(key);
 
-	value_size = bpf_map_value_size(map);
+	value_size = bpf_map_value_size(map, attr->flags);
 
 	err = -ENOMEM;
 	value = kvmalloc(value_size, GFP_USER | __GFP_NOWARN);
@@ -1791,7 +1793,7 @@ static int map_update_elem(union bpf_attr *attr, bpfptr_t uattr)
 		goto err_put;
 	}
 
-	value_size = bpf_map_value_size(map);
+	value_size = bpf_map_value_size(map, attr->flags);
 	value = kvmemdup_bpfptr(uvalue, value_size);
 	if (IS_ERR(value)) {
 		err = PTR_ERR(value);
@@ -1987,11 +1989,12 @@ int generic_map_update_batch(struct bpf_map *map, struct file *map_file,
 	void *key, *value;
 	int err = 0;
 
-	err = bpf_map_check_op_flags(map, attr->batch.elem_flags, BPF_F_LOCK);
+	err = bpf_map_check_op_flags(map, attr->batch.elem_flags,
+				     BPF_F_LOCK | BPF_F_CPU | BPF_F_ALL_CPUS);
 	if (err)
 		return err;
 
-	value_size = bpf_map_value_size(map);
+	value_size = bpf_map_value_size(map, attr->batch.elem_flags);
 
 	max_count = attr->batch.count;
 	if (!max_count)
@@ -2046,11 +2049,11 @@ int generic_map_lookup_batch(struct bpf_map *map,
 	u32 value_size, cp, max_count;
 	int err;
 
-	err = bpf_map_check_op_flags(map, attr->batch.elem_flags, BPF_F_LOCK);
+	err = bpf_map_check_op_flags(map, attr->batch.elem_flags, BPF_F_LOCK | BPF_F_CPU);
 	if (err)
 		return err;
 
-	value_size = bpf_map_value_size(map);
+	value_size = bpf_map_value_size(map, attr->batch.elem_flags);
 
 	max_count = attr->batch.count;
 	if (!max_count)
@@ -2172,7 +2175,7 @@ static int map_lookup_and_delete_elem(union bpf_attr *attr)
 		goto err_put;
 	}
 
-	value_size = bpf_map_value_size(map);
+	value_size = bpf_map_value_size(map, 0);
 
 	err = -ENOMEM;
 	value = kvmalloc(value_size, GFP_USER | __GFP_NOWARN);
tools/include/uapi/linux/bpf.h +2 -0
index ae83d8649ef1c..f827353424ec5 100644
@@ -1372,6 +1372,8 @@ enum {
 	BPF_NOEXIST	= 1, /* create new element if it didn't exist */
 	BPF_EXIST	= 2, /* update existing element */
 	BPF_F_LOCK	= 4, /* spin_lock-ed map_lookup/map_update */
+	BPF_F_CPU	= 8, /* cpu flag for percpu maps, upper 32-bit of flags is a cpu number */
+	BPF_F_ALL_CPUS	= 16, /* update value across all CPUs for percpu maps */
 };
 
 /* flags for BPF_MAP_CREATE command */
Signature · 1 line
2.51.0
author
#3 lore raw

PATCH v9 3/7 bpf: Add BPF_F_CPU and BPF_F_ALL_CPUS flags support for percpu_array maps

In reply to Leon Hwang

Introduce support for the BPF_F_ALL_CPUS flag in percpu_array maps to allow updating values for all CPUs with a single value for both update_elem and update_batch APIs.

Introduce support for the BPF_F_CPU flag in percpu_array maps to allow:

* update value for specified CPU for both update_elem and update_batch APIs.
* lookup value for specified CPU for both lookup_elem and lookup_batch APIs.

The BPF_F_CPU flag is passed via:

* map_flags of lookup_elem and update_elem APIs along with embedded cpu info.
* elem_flags of lookup_batch and update_batch APIs along with embedded cpu info.

---
 include/linux/bpf.h   |  9 +++++++--
 kernel/bpf/arraymap.c | 25 ++++++++++++++++++++-----
 kernel/bpf/syscall.c  |  2 +-
 3 files changed, 28 insertions(+), 8 deletions(-)
include/linux/bpf.h +7 -2
index 731de0efdd00e..31498b445b447 100644
@@ -2718,7 +2718,7 @@ int map_set_for_each_callback_args(struct bpf_verifier_env *env,
 				   struct bpf_func_state *callee);
 
 int bpf_percpu_hash_copy(struct bpf_map *map, void *key, void *value);
-int bpf_percpu_array_copy(struct bpf_map *map, void *key, void *value);
+int bpf_percpu_array_copy(struct bpf_map *map, void *key, void *value, u64 flags);
 int bpf_percpu_hash_update(struct bpf_map *map, void *key, void *value,
 			   u64 flags);
 int bpf_percpu_array_update(struct bpf_map *map, void *key, void *value,
@@ -3770,7 +3770,12 @@ struct bpf_prog *bpf_prog_find_from_stack(void);
 
 static inline bool bpf_map_supports_cpu_flags(enum bpf_map_type map_type)
 {
-	return false;
+	switch (map_type) {
+	case BPF_MAP_TYPE_PERCPU_ARRAY:
+		return true;
+	default:
+		return false;
+	}
 }
 
 static inline int bpf_map_check_op_flags(struct bpf_map *map, u64 flags, u64 allowed_flags)
kernel/bpf/arraymap.c +20 -5
index 80b1765a31596..78e590ffd2a62 100644
@@ -307,7 +307,7 @@ static void *percpu_array_map_lookup_percpu_elem(struct bpf_map *map, void *key,
 	return per_cpu_ptr(array->pptrs[index & array->index_mask], cpu);
 }
 
-int bpf_percpu_array_copy(struct bpf_map *map, void *key, void *value)
+int bpf_percpu_array_copy(struct bpf_map *map, void *key, void *value, u64 map_flags)
 {
 	struct bpf_array *array = container_of(map, struct bpf_array, map);
 	u32 index = *(u32 *)key;
@@ -325,11 +325,18 @@ int bpf_percpu_array_copy(struct bpf_map *map, void *key, void *value)
 	size = array->elem_size;
 	rcu_read_lock();
 	pptr = array->pptrs[index & array->index_mask];
+	if (map_flags & BPF_F_CPU) {
+		cpu = map_flags >> 32;
+		copy_map_value(map, value, per_cpu_ptr(pptr, cpu));
+		check_and_init_map_value(map, value);
+		goto unlock;
+	}
 	for_each_possible_cpu(cpu) {
 		copy_map_value_long(map, value + off, per_cpu_ptr(pptr, cpu));
 		check_and_init_map_value(map, value + off);
 		off += size;
 	}
+unlock:
 	rcu_read_unlock();
 	return 0;
 }
@@ -399,10 +406,11 @@ int bpf_percpu_array_update(struct bpf_map *map, void *key, void *value,
 	struct bpf_array *array = container_of(map, struct bpf_array, map);
 	u32 index = *(u32 *)key;
 	void __percpu *pptr;
-	int cpu, off = 0;
+	void *ptr;
 	u32 size;
+	int cpu;
 
-	if (unlikely(map_flags > BPF_EXIST))
+	if (unlikely((map_flags & BPF_F_LOCK) || (u32)map_flags > BPF_F_ALL_CPUS))
 		/* unknown flags */
 		return -EINVAL;
 
@@ -423,11 +431,18 @@ int bpf_percpu_array_update(struct bpf_map *map, void *key, void *value,
 	size = array->elem_size;
 	rcu_read_lock();
 	pptr = array->pptrs[index & array->index_mask];
+	if (map_flags & BPF_F_CPU) {
+		cpu = map_flags >> 32;
+		copy_map_value(map, per_cpu_ptr(pptr, cpu), value);
+		bpf_obj_free_fields(array->map.record, per_cpu_ptr(pptr, cpu));
+		goto unlock;
+	}
 	for_each_possible_cpu(cpu) {
-		copy_map_value_long(map, per_cpu_ptr(pptr, cpu), value + off);
+		ptr = (map_flags & BPF_F_ALL_CPUS) ? value : value + size * cpu;
+		copy_map_value(map, per_cpu_ptr(pptr, cpu), ptr);
 		bpf_obj_free_fields(array->map.record, per_cpu_ptr(pptr, cpu));
-		off += size;
 	}
+unlock:
 	rcu_read_unlock();
 	return 0;
 }
kernel/bpf/syscall.c +1 -1
index 8c206d46de3f5..f8de1433fdffb 100644
@@ -318,7 +318,7 @@ static int bpf_map_copy_value(struct bpf_map *map, void *key, void *value,
 	    map->map_type == BPF_MAP_TYPE_LRU_PERCPU_HASH) {
 		err = bpf_percpu_hash_copy(map, key, value);
 	} else if (map->map_type == BPF_MAP_TYPE_PERCPU_ARRAY) {
-		err = bpf_percpu_array_copy(map, key, value);
+		err = bpf_percpu_array_copy(map, key, value, flags);
 	} else if (map->map_type == BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE) {
 		err = bpf_percpu_cgroup_storage_copy(map, key, value);
 	} else if (map->map_type == BPF_MAP_TYPE_STACK_TRACE) {
Signature · 1 line
2.51.0
author
#4 lore raw

PATCH v9 4/7 bpf: Add BPF_F_CPU and BPF_F_ALL_CPUS flags support for percpu_hash and lru_percpu_hash maps

In reply to Leon Hwang

Introduce BPF_F_ALL_CPUS flag support for percpu_hash and lru_percpu_hash maps to allow updating values for all CPUs with a single value for both update_elem and update_batch APIs.

Introduce BPF_F_CPU flag support for percpu_hash and lru_percpu_hash maps to allow:

* update value for specified CPU for both update_elem and update_batch APIs.
* lookup value for specified CPU for both lookup_elem and lookup_batch APIs.

The BPF_F_CPU flag is passed via:

* map_flags along with embedded cpu info.
* elem_flags along with embedded cpu info.

---
 include/linux/bpf.h  |  4 ++-
 kernel/bpf/hashtab.c | 82 +++++++++++++++++++++++++++++---------------
 kernel/bpf/syscall.c |  2 +-
 3 files changed, 59 insertions(+), 29 deletions(-)
include/linux/bpf.h +3 -1
index 31498b445b447..b3d9a584f34e2 100644
@@ -2717,7 +2717,7 @@ int map_set_for_each_callback_args(struct bpf_verifier_env *env,
 				   struct bpf_func_state *caller,
 				   struct bpf_func_state *callee);
 
-int bpf_percpu_hash_copy(struct bpf_map *map, void *key, void *value);
+int bpf_percpu_hash_copy(struct bpf_map *map, void *key, void *value, u64 flags);
 int bpf_percpu_array_copy(struct bpf_map *map, void *key, void *value, u64 flags);
 int bpf_percpu_hash_update(struct bpf_map *map, void *key, void *value,
 			   u64 flags);
@@ -3772,6 +3772,8 @@ static inline bool bpf_map_supports_cpu_flags(enum bpf_map_type map_type)
 {
 	switch (map_type) {
 	case BPF_MAP_TYPE_PERCPU_ARRAY:
+	case BPF_MAP_TYPE_PERCPU_HASH:
+	case BPF_MAP_TYPE_LRU_PERCPU_HASH:
 		return true;
 	default:
 		return false;
kernel/bpf/hashtab.c +55 -27

207 lines not on this page · raw message

kernel/bpf/syscall.c +1 -1
index f8de1433fdffb..ce525a474656a 100644
@@ -316,7 +316,7 @@ static int bpf_map_copy_value(struct bpf_map *map, void *key, void *value,
 	bpf_disable_instrumentation();
 	if (map->map_type == BPF_MAP_TYPE_PERCPU_HASH ||
 	    map->map_type == BPF_MAP_TYPE_LRU_PERCPU_HASH) {
-		err = bpf_percpu_hash_copy(map, key, value);
+		err = bpf_percpu_hash_copy(map, key, value, flags);
 	} else if (map->map_type == BPF_MAP_TYPE_PERCPU_ARRAY) {
 		err = bpf_percpu_array_copy(map, key, value, flags);
 	} else if (map->map_type == BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE) {
Signature · 1 line
2.51.0
author
#8 lore raw

PATCH v9 5/7 bpf: Add BPF_F_CPU and BPF_F_ALL_CPUS flags support for percpu_cgroup_storage maps

In reply to Leon Hwang

Introduce BPF_F_ALL_CPUS flag support for percpu_cgroup_storage maps to allow updating values for all CPUs with a single value for update_elem API.

Introduce BPF_F_CPU flag support for percpu_cgroup_storage maps to allow:

* update value for specified CPU for update_elem API.
* lookup value for specified CPU for lookup_elem API.

The BPF_F_CPU flag is passed via map_flags along with embedded cpu info.

---
 include/linux/bpf-cgroup.h |  4 ++--
 include/linux/bpf.h        |  1 +
 kernel/bpf/local_storage.c | 27 ++++++++++++++++++++-------
 kernel/bpf/syscall.c       |  2 +-
 4 files changed, 24 insertions(+), 10 deletions(-)
include/linux/bpf-cgroup.h +2 -2
index aedf573bdb426..013f4db9903fd 100644
@@ -172,7 +172,7 @@ void bpf_cgroup_storage_link(struct bpf_cgroup_storage *storage,
 void bpf_cgroup_storage_unlink(struct bpf_cgroup_storage *storage);
 int bpf_cgroup_storage_assign(struct bpf_prog_aux *aux, struct bpf_map *map);
 
-int bpf_percpu_cgroup_storage_copy(struct bpf_map *map, void *key, void *value);
+int bpf_percpu_cgroup_storage_copy(struct bpf_map *map, void *key, void *value, u64 flags);
 int bpf_percpu_cgroup_storage_update(struct bpf_map *map, void *key,
 				     void *value, u64 flags);
 
@@ -467,7 +467,7 @@ static inline struct bpf_cgroup_storage *bpf_cgroup_storage_alloc(
 static inline void bpf_cgroup_storage_free(
 	struct bpf_cgroup_storage *storage) {}
 static inline int bpf_percpu_cgroup_storage_copy(struct bpf_map *map, void *key,
-						 void *value) {
+						 void *value, u64 flags) {
 	return 0;
 }
 static inline int bpf_percpu_cgroup_storage_update(struct bpf_map *map,
include/linux/bpf.h +1 -0
index b3d9a584f34e2..6250804394b53 100644
@@ -3774,6 +3774,7 @@ static inline bool bpf_map_supports_cpu_flags(enum bpf_map_type map_type)
 	case BPF_MAP_TYPE_PERCPU_ARRAY:
 	case BPF_MAP_TYPE_PERCPU_HASH:
 	case BPF_MAP_TYPE_LRU_PERCPU_HASH:
+	case BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE:
 		return true;
 	default:
 		return false;
kernel/bpf/local_storage.c +20 -7
index c93a756e035c0..f5188e0afa478 100644
@@ -180,7 +180,7 @@ static long cgroup_storage_update_elem(struct bpf_map *map, void *key,
 }
 
 int bpf_percpu_cgroup_storage_copy(struct bpf_map *_map, void *key,
-				   void *value)
+				   void *value, u64 map_flags)
 {
 	struct bpf_cgroup_storage_map *map = map_to_storage(_map);
 	struct bpf_cgroup_storage *storage;
@@ -198,12 +198,18 @@ int bpf_percpu_cgroup_storage_copy(struct bpf_map *_map, void *key,
 	 * access 'value_size' of them, so copying rounded areas
 	 * will not leak any kernel data
 	 */
+	if (map_flags & BPF_F_CPU) {
+		cpu = map_flags >> 32;
+		memcpy(value, per_cpu_ptr(storage->percpu_buf, cpu), _map->value_size);
+		goto unlock;
+	}
 	size = round_up(_map->value_size, 8);
 	for_each_possible_cpu(cpu) {
 		bpf_long_memcpy(value + off,
 				per_cpu_ptr(storage->percpu_buf, cpu), size);
 		off += size;
 	}
+unlock:
 	rcu_read_unlock();
 	return 0;
 }
@@ -213,10 +219,11 @@ int bpf_percpu_cgroup_storage_update(struct bpf_map *_map, void *key,
 {
 	struct bpf_cgroup_storage_map *map = map_to_storage(_map);
 	struct bpf_cgroup_storage *storage;
-	int cpu, off = 0;
+	void *ptr;
 	u32 size;
+	int cpu;
 
-	if (map_flags != BPF_ANY && map_flags != BPF_EXIST)
+	if ((u32)map_flags & ~(BPF_ANY | BPF_EXIST | BPF_F_CPU | BPF_F_ALL_CPUS))
 		return -EINVAL;
 
 	rcu_read_lock();
@@ -232,12 +239,18 @@ int bpf_percpu_cgroup_storage_update(struct bpf_map *_map, void *key,
 	 * returned or zeros which were zero-filled by percpu_alloc,
 	 * so no kernel data leaks possible
 	 */
-	size = round_up(_map->value_size, 8);
+	size = (map_flags & (BPF_F_CPU | BPF_F_ALL_CPUS)) ? _map->value_size :
+		round_up(_map->value_size, 8);
+	if (map_flags & BPF_F_CPU) {
+		cpu = map_flags >> 32;
+		memcpy(per_cpu_ptr(storage->percpu_buf, cpu), value, size);
+		goto unlock;
+	}
 	for_each_possible_cpu(cpu) {
-		bpf_long_memcpy(per_cpu_ptr(storage->percpu_buf, cpu),
-				value + off, size);
-		off += size;
+		ptr = (map_flags & BPF_F_ALL_CPUS) ? value : value + size * cpu;
+		memcpy(per_cpu_ptr(storage->percpu_buf, cpu), ptr, size);
 	}
+unlock:
 	rcu_read_unlock();
 	return 0;
 }
kernel/bpf/syscall.c +1 -1
index ce525a474656a..b654115c99e01 100644
@@ -320,7 +320,7 @@ static int bpf_map_copy_value(struct bpf_map *map, void *key, void *value,
 	} else if (map->map_type == BPF_MAP_TYPE_PERCPU_ARRAY) {
 		err = bpf_percpu_array_copy(map, key, value, flags);
 	} else if (map->map_type == BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE) {
-		err = bpf_percpu_cgroup_storage_copy(map, key, value);
+		err = bpf_percpu_cgroup_storage_copy(map, key, value, flags);
 	} else if (map->map_type == BPF_MAP_TYPE_STACK_TRACE) {
 		err = bpf_stackmap_extract(map, key, value, false);
 	} else if (IS_FD_ARRAY(map) || IS_FD_PROG_ARRAY(map)) {
Signature · 1 line
2.51.0
author
#11 lore raw

PATCH v9 6/7 libbpf: Add BPF_F_CPU and BPF_F_ALL_CPUS flags support for percpu maps

In reply to Leon Hwang

Add libbpf support for the BPF_F_CPU flag for percpu maps by embedding the cpu info into the high 32 bits of:

1. **flags**: bpf_map_lookup_elem_flags(), bpf_map__lookup_elem(), bpf_map_update_elem() and bpf_map__update_elem()
2. **opts->elem_flags**: bpf_map_lookup_batch() and bpf_map_update_batch()

And the flag can be BPF_F_ALL_CPUS, but cannot be
'BPF_F_CPU | BPF_F_ALL_CPUS'.

Behavior:

* If the flag is BPF_F_ALL_CPUS, the update is applied across all CPUs.
* If the flag is BPF_F_CPU, it updates value only to the specified CPU.
* If the flag is BPF_F_CPU, lookup value only from the specified CPU.
* lookup does not support BPF_F_ALL_CPUS.

---
 tools/lib/bpf/bpf.h    |  8 ++++++++
 tools/lib/bpf/libbpf.c | 26 ++++++++++++++++++++------
 tools/lib/bpf/libbpf.h | 21 ++++++++-------------
 3 files changed, 36 insertions(+), 19 deletions(-)
tools/lib/bpf/bpf.h +8 -0
index e983a3e40d612..ffd93feffd71d 100644
@@ -289,6 +289,14 @@ LIBBPF_API int bpf_map_lookup_and_delete_batch(int fd, void *in_batch,
  *    Update spin_lock-ed map elements. This must be
  *    specified if the map value contains a spinlock.
  *
+ * **BPF_F_CPU**
+ *    As for percpu maps, update value on the specified CPU. And the cpu
+ *    info is embedded into the high 32 bits of **opts->elem_flags**.
+ *
+ * **BPF_F_ALL_CPUS**
+ *    As for percpu maps, update value across all CPUs. This flag cannot
+ *    be used with BPF_F_CPU at the same time.
+ *
  * @param fd BPF map file descriptor
  * @param keys pointer to an array of *count* keys
  * @param values pointer to an array of *count* values
tools/lib/bpf/libbpf.c +20 -6
index f92083f51bdb3..4f73a54c0a81f 100644
@@ -10671,7 +10671,7 @@ bpf_object__find_map_fd_by_name(const struct bpf_object *obj, const char *name)
 }
 
 static int validate_map_op(const struct bpf_map *map, size_t key_sz,
-			   size_t value_sz, bool check_value_sz)
+			   size_t value_sz, bool check_value_sz, __u64 flags)
 {
 	if (!map_is_created(map)) /* map is not yet created */
 		return -ENOENT;
@@ -10698,6 +10698,20 @@ static int validate_map_op(const struct bpf_map *map, size_t key_sz,
 		int num_cpu = libbpf_num_possible_cpus();
 		size_t elem_sz = roundup(map->def.value_size, 8);
 
+		if (flags & (BPF_F_CPU | BPF_F_ALL_CPUS)) {
+			if ((flags & BPF_F_CPU) && (flags & BPF_F_ALL_CPUS)) {
+				pr_warn("map '%s': BPF_F_CPU and BPF_F_ALL_CPUS are mutually exclusive\n",
+					map->name);
+				return -EINVAL;
+			}
+			if (map->def.value_size != value_sz) {
+				pr_warn("map '%s': unexpected value size %zu provided for either BPF_F_CPU or BPF_F_ALL_CPUS, expected %u\n",
+					map->name, value_sz, map->def.value_size);
+				return -EINVAL;
+			}
+			break;
+		}
+
 		if (value_sz != num_cpu * elem_sz) {
 			pr_warn("map '%s': unexpected value size %zu provided for per-CPU map, expected %d * %zu = %zd\n",
 				map->name, value_sz, num_cpu, elem_sz, num_cpu * elem_sz);
@@ -10722,7 +10736,7 @@ int bpf_map__lookup_elem(const struct bpf_map *map,
 {
 	int err;
 
-	err = validate_map_op(map, key_sz, value_sz, true);
+	err = validate_map_op(map, key_sz, value_sz, true, flags);
 	if (err)
 		return libbpf_err(err);
 
@@ -10735,7 +10749,7 @@ int bpf_map__update_elem(const struct bpf_map *map,
 {
 	int err;
 
-	err = validate_map_op(map, key_sz, value_sz, true);
+	err = validate_map_op(map, key_sz, value_sz, true, flags);
 	if (err)
 		return libbpf_err(err);
 
@@ -10747,7 +10761,7 @@ int bpf_map__delete_elem(const struct bpf_map *map,
 {
 	int err;
 
-	err = validate_map_op(map, key_sz, 0, false /* check_value_sz */);
+	err = validate_map_op(map, key_sz, 0, false /* check_value_sz */, flags);
 	if (err)
 		return libbpf_err(err);
 
@@ -10760,7 +10774,7 @@ int bpf_map__lookup_and_delete_elem(const struct bpf_map *map,
 {
 	int err;
 
-	err = validate_map_op(map, key_sz, value_sz, true);
+	err = validate_map_op(map, key_sz, value_sz, true, flags);
 	if (err)
 		return libbpf_err(err);
 
@@ -10772,7 +10786,7 @@ int bpf_map__get_next_key(const struct bpf_map *map,
 {
 	int err;
 
-	err = validate_map_op(map, key_sz, 0, false /* check_value_sz */);
+	err = validate_map_op(map, key_sz, 0, false /* check_value_sz */, 0);
 	if (err)
 		return libbpf_err(err);
 
tools/lib/bpf/libbpf.h +8 -13
index 5118d0a90e243..7c38b2e546080 100644
@@ -1196,12 +1196,13 @@ LIBBPF_API struct bpf_map *bpf_map__inner_map(struct bpf_map *map);
  * @param key_sz size in bytes of key data, needs to match BPF map definition's **key_size**
  * @param value pointer to memory in which looked up value will be stored
  * @param value_sz size in byte of value data memory; it has to match BPF map
- * definition's **value_size**. For per-CPU BPF maps value size has to be
- * a product of BPF map value size and number of possible CPUs in the system
- * (could be fetched with **libbpf_num_possible_cpus()**). Note also that for
- * per-CPU values value size has to be aligned up to closest 8 bytes for
- * alignment reasons, so expected size is: `round_up(value_size, 8)
- * * libbpf_num_possible_cpus()`.
+ * definition's **value_size**. For per-CPU BPF maps, value size can be
+ * `value_size` if either **BPF_F_CPU** or **BPF_F_ALL_CPUS** is specified
+ * in **flags**, otherwise a product of BPF map value size and number of
+ * possible CPUs in the system (could be fetched with
+ * **libbpf_num_possible_cpus()**). Note also that for per-CPU values value
+ * size has to be aligned up to closest 8 bytes, so expected size is:
+ * `round_up(value_size, 8) * libbpf_num_possible_cpus()`.
  * @flags extra flags passed to kernel for this operation
  * @return 0, on success; negative error, otherwise
  *
@@ -1219,13 +1220,7 @@ LIBBPF_API int bpf_map__lookup_elem(const struct bpf_map *map,
  * @param key pointer to memory containing bytes of the key
  * @param key_sz size in bytes of key data, needs to match BPF map definition's **key_size**
  * @param value pointer to memory containing bytes of the value
- * @param value_sz size in byte of value data memory; it has to match BPF map
- * definition's **value_size**. For per-CPU BPF maps value size has to be
- * a product of BPF map value size and number of possible CPUs in the system
- * (could be fetched with **libbpf_num_possible_cpus()**). Note also that for
- * per-CPU values value size has to be aligned up to closest 8 bytes for
- * alignment reasons, so expected size is: `round_up(value_size, 8)
- * * libbpf_num_possible_cpus()`.
+ * @param value_sz refer to **bpf_map__lookup_elem**'s description.'
  * @flags extra flags passed to kernel for this operation
  * @return 0, on success; negative error, otherwise
  *
Signature · 1 line
2.51.0
author
#12 lore raw

PATCH v9 7/7 selftests/bpf: Add cases to test BPF_F_CPU and BPF_F_ALL_CPUS flags

In reply to Leon Hwang

Add test coverage for the new BPF_F_CPU and BPF_F_ALL_CPUS flags support in percpu maps. The following APIs are exercised:

* bpf_map_update_batch()
* bpf_map_lookup_batch()
* bpf_map_update_elem()
* bpf_map__update_elem()
* bpf_map_lookup_elem_flags()
* bpf_map__lookup_elem()

---
 .../selftests/bpf/prog_tests/percpu_alloc.c   | 248 ++++++++++++++++++
 .../selftests/bpf/progs/percpu_alloc_array.c  |  32 +++
 2 files changed, 280 insertions(+)
tools/testing/selftests/bpf/prog_tests/percpu_alloc.c +248 -0
index 343da65864d6d..06e16cd646176 100644
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <test_progs.h>
+#include "cgroup_helpers.h"
 #include "percpu_alloc_array.skel.h"
 #include "percpu_alloc_cgrp_local_storage.skel.h"
 #include "percpu_alloc_fail.skel.h"
@@ -115,6 +116,245 @@ static void test_failure(void) {
 	RUN_TESTS(percpu_alloc_fail);
 }
 
+static void test_percpu_map_op_cpu_flag(struct bpf_map *map, void *keys, size_t key_sz,
+					u32 max_entries, bool test_batch)
+{
+	size_t value_sz = sizeof(u32), value_sz_cpus, value_sz_total;
+	u32 *values = NULL, *values_percpu = NULL;
+	int i, j, cpu, map_fd, nr_cpus, err;
+	const u32 value = 0xDEADC0DE;
+	u32 count = max_entries, v;
+	u64 batch = 0, flags;
+	void *values_row;
+	LIBBPF_OPTS(bpf_map_batch_opts, batch_opts);
+
+	nr_cpus = libbpf_num_possible_cpus();
+	if (!ASSERT_GT(nr_cpus, 0, "libbpf_num_possible_cpus"))
+		return;
+
+	value_sz_cpus = value_sz * nr_cpus;
+	values = calloc(max_entries, value_sz_cpus);
+	if (!ASSERT_OK_PTR(values, "calloc values"))
+		return;
+
+	values_percpu = calloc(max_entries, roundup(value_sz, 8) * nr_cpus);
+	if (!ASSERT_OK_PTR(values_percpu, "calloc values_percpu")) {
+		free(values);
+		return;
+	}
+
+	value_sz_total = value_sz_cpus * max_entries;
+	memset(values, 0, value_sz_total);
+
+	map_fd = bpf_map__fd(map);
+	flags = BPF_F_CPU | BPF_F_ALL_CPUS;
+	err = bpf_map_lookup_elem_flags(map_fd, keys, values, flags);
+	if (!ASSERT_ERR(err, "bpf_map_lookup_elem_flags err"))
+		goto out;
+
+	err = bpf_map_update_elem(map_fd, keys, values, flags);
+	if (!ASSERT_ERR(err, "bpf_map_update_elem err"))
+		goto out;
+
+	flags = (u64)nr_cpus << 32 | BPF_F_CPU;
+	err = bpf_map_update_elem(map_fd, keys, values, flags);
+	if (!ASSERT_EQ(err, -ERANGE, "bpf_map_update_elem -ERANGE"))
+		goto out;
+
+	err = bpf_map__update_elem(map, keys, key_sz, values, value_sz, flags);
+	if (!ASSERT_EQ(err, -ERANGE, "bpf_map__update_elem -ERANGE"))
+		goto out;
+
+	err = bpf_map_lookup_elem_flags(map_fd, keys, values, flags);
+	if (!ASSERT_EQ(err, -ERANGE, "bpf_map_lookup_elem_flags -ERANGE"))
+		goto out;
+
+	err = bpf_map__lookup_elem(map, keys, key_sz, values, value_sz, flags);
+	if (!ASSERT_EQ(err, -ERANGE, "bpf_map__lookup_elem -ERANGE"))
+		goto out;
+
+	for (cpu = 0; cpu < nr_cpus; cpu++) {
+		/* clear value on all cpus */
+		values[0] = 0;
+		flags = BPF_F_ALL_CPUS;
+		for (i = 0; i < max_entries; i++) {
+			err = bpf_map__update_elem(map, keys + i * key_sz, key_sz, values,
+						   value_sz, flags);
+			if (!ASSERT_OK(err, "bpf_map__update_elem all_cpus"))
+				goto out;
+		}
+
+		/* update value on specified cpu */
+		for (i = 0; i < max_entries; i++) {
+			values[0] = value;
+			flags = (u64)cpu << 32 | BPF_F_CPU;
+			err = bpf_map__update_elem(map, keys + i * key_sz, key_sz, values,
+						   value_sz, flags);
+			if (!ASSERT_OK(err, "bpf_map__update_elem specified cpu"))
+				goto out;
+
+			/* lookup then check value on CPUs */
+			for (j = 0; j < nr_cpus; j++) {
+				flags = (u64)j << 32 | BPF_F_CPU;
+				err = bpf_map__lookup_elem(map, keys + i * key_sz, key_sz, values,
+							   value_sz, flags);
+				if (!ASSERT_OK(err, "bpf_map__lookup_elem specified cpu"))
+					goto out;
+				if (!ASSERT_EQ(values[0], j != cpu ? 0 : value,
+					       "bpf_map__lookup_elem value on specified cpu"))
+					goto out;
+			}
+		}
+	}
+
+	if (!test_batch)
+		goto out;
+
+	batch_opts.elem_flags = (u64)nr_cpus << 32 | BPF_F_CPU;
+	err = bpf_map_update_batch(map_fd, keys, values, &max_entries, &batch_opts);
+	if (!ASSERT_EQ(err, -ERANGE, "bpf_map_update_batch -ERANGE"))
+		goto out;
+
+	for (cpu = 0; cpu < nr_cpus; cpu++) {
+		memset(values, 0, value_sz_total);
+
+		/* clear values across all CPUs */
+		batch_opts.elem_flags = BPF_F_ALL_CPUS;
+		err = bpf_map_update_batch(map_fd, keys, values, &max_entries, &batch_opts);
+		if (!ASSERT_OK(err, "bpf_map_update_batch all_cpus"))
+			goto out;
+
+		/* update values on specified CPU */
+		for (i = 0; i < max_entries; i++)
+			values[i] = value;
+
+		batch_opts.elem_flags = (u64)cpu << 32 | BPF_F_CPU;
+		err = bpf_map_update_batch(map_fd, keys, values, &max_entries, &batch_opts);
+		if (!ASSERT_OK(err, "bpf_map_update_batch specified cpu"))
+			goto out;
+
+		/* lookup values on specified CPU */
+		memset(values, 0, max_entries * value_sz);
+		err = bpf_map_lookup_batch(map_fd, NULL, &batch, keys, values, &count, &batch_opts);
+		if (!ASSERT_TRUE(!err || err == -ENOENT, "bpf_map_lookup_batch specified cpu"))
+			goto out;
+
+		for (i = 0; i < max_entries; i++)
+			if (!ASSERT_EQ(values[i], value,
+				       "bpf_map_lookup_batch value on specified cpu"))
+				goto out;
+
+		/* lookup values from all CPUs */
+		batch_opts.elem_flags = 0;
+		memset(values_percpu, 0, roundup(value_sz, 8) * nr_cpus * max_entries);
+		err = bpf_map_lookup_batch(map_fd, NULL, &batch, keys, values_percpu, &count,
+					   &batch_opts);
+		if (!ASSERT_TRUE(!err || err == -ENOENT, "bpf_map_lookup_batch all_cpus"))
+			goto out;
+
+		for (i = 0; i < max_entries; i++) {
+			values_row = (void *) values_percpu +
+				     roundup(value_sz, 8) * i * nr_cpus;
+			for (j = 0; j < nr_cpus; j++) {
+				v = *(u32 *) (values_row + roundup(value_sz, 8) * j);
+				if (!ASSERT_EQ(v, j != cpu ? 0 : value,
+					       "bpf_map_lookup_batch value all_cpus"))
+					goto out;
+			}
+		}
+	}
+
+out:
+	free(values_percpu);
+	free(values);
+}
+
+static void test_percpu_map_cpu_flag(enum bpf_map_type map_type)
+{
+	struct percpu_alloc_array *skel;
+	size_t key_sz = sizeof(int);
+	int *keys = NULL, i, err;
+	struct bpf_map *map;
+	u32 max_entries;
+
+	skel = percpu_alloc_array__open();
+	if (!ASSERT_OK_PTR(skel, "percpu_alloc_array__open"))
+		return;
+
+	map = skel->maps.percpu;
+	bpf_map__set_type(map, map_type);
+
+	err = percpu_alloc_array__load(skel);
+	if (!ASSERT_OK(err, "test_percpu_alloc__load"))
+		goto out;
+
+	max_entries = bpf_map__max_entries(map);
+	keys = calloc(max_entries, key_sz);
+	if (!ASSERT_OK_PTR(keys, "calloc keys"))
+		goto out;
+
+	for (i = 0; i < max_entries; i++)
+		keys[i] = i;
+
+	test_percpu_map_op_cpu_flag(map, keys, key_sz, max_entries, true);
+out:
+	if (keys)
+		free(keys);
+	percpu_alloc_array__destroy(skel);
+}
+
+static void test_percpu_array_cpu_flag(void)
+{
+	test_percpu_map_cpu_flag(BPF_MAP_TYPE_PERCPU_ARRAY);
+}
+
+static void test_percpu_hash_cpu_flag(void)
+{
+	test_percpu_map_cpu_flag(BPF_MAP_TYPE_PERCPU_HASH);
+}
+
+static void test_lru_percpu_hash_cpu_flag(void)
+{
+	test_percpu_map_cpu_flag(BPF_MAP_TYPE_LRU_PERCPU_HASH);
+}
+
+static void test_percpu_cgroup_storage_cpu_flag(void)
+{
+	struct bpf_cgroup_storage_key key;
+	struct percpu_alloc_array *skel;
+	int cgroup = -1, prog_fd, err;
+	struct bpf_map *map;
+
+	skel = percpu_alloc_array__open_and_load();
+	if (!ASSERT_OK_PTR(skel, "percpu_alloc_array__open_and_load"))
+		return;
+
+	cgroup = create_and_get_cgroup("/cg_percpu");
+	if (!ASSERT_GE(cgroup, 0, "create_and_get_cgroup"))
+		goto out;
+
+	err = join_cgroup("/cg_percpu");
+	if (!ASSERT_OK(err, "join_cgroup"))
+		goto out;
+
+	prog_fd = bpf_program__fd(skel->progs.cgroup_egress);
+	err = bpf_prog_attach(prog_fd, cgroup, BPF_CGROUP_INET_EGRESS, 0);
+	if (!ASSERT_OK(err, "bpf_prog_attach"))
+		goto out;
+
+	map = skel->maps.percpu_cgroup_storage;
+	err = bpf_map_get_next_key(bpf_map__fd(map), NULL, &key);
+	if (!ASSERT_OK(err, "bpf_map_get_next_key"))
+		goto out;
+
+	test_percpu_map_op_cpu_flag(map, &key, sizeof(key), 1, false);
+out:
+	bpf_prog_detach2(-1, cgroup, BPF_CGROUP_INET_EGRESS);
+	close(cgroup);
+	cleanup_cgroup_environment();
+	percpu_alloc_array__destroy(skel);
+}
+
 void test_percpu_alloc(void)
 {
 	if (test__start_subtest("array"))
@@ -125,4 +365,12 @@ void test_percpu_alloc(void)
 		test_cgrp_local_storage();
 	if (test__start_subtest("failure_tests"))
 		test_failure();
+	if (test__start_subtest("cpu_flag_percpu_array"))
+		test_percpu_array_cpu_flag();
+	if (test__start_subtest("cpu_flag_percpu_hash"))
+		test_percpu_hash_cpu_flag();
+	if (test__start_subtest("cpu_flag_lru_percpu_hash"))
+		test_lru_percpu_hash_cpu_flag();
+	if (test__start_subtest("cpu_flag_percpu_cgroup_storage"))
+		test_percpu_cgroup_storage_cpu_flag();
 }
tools/testing/selftests/bpf/progs/percpu_alloc_array.c +32 -0
index 37c2d2608ec0b..ed6a2a93d5a51 100644
@@ -187,4 +187,36 @@ int BPF_PROG(test_array_map_10)
 	return 0;
 }
 
+struct {
+	__uint(type, BPF_MAP_TYPE_PERCPU_ARRAY);
+	__uint(max_entries, 2);
+	__type(key, int);
+	__type(value, u32);
+} percpu SEC(".maps");
+
+SEC("?fentry/bpf_fentry_test1")
+int BPF_PROG(test_percpu_array, int x)
+{
+	u64 value = 0xDEADC0DE;
+	int key = 0;
+
+	bpf_map_update_elem(&percpu, &key, &value, BPF_ANY);
+	return 0;
+}
+
+struct {
+	__uint(type, BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE);
+	__type(key, struct bpf_cgroup_storage_key);
+	__type(value, u32);
+} percpu_cgroup_storage SEC(".maps");
+
+SEC("cgroup_skb/egress")
+int cgroup_egress(struct __sk_buff *skb)
+{
+	u32 *val = bpf_get_local_storage(&percpu_cgroup_storage, 0);
+
+	*val = 1;
+	return 1;
+}
+
 char _license[] SEC("license") = "GPL";
Signature · 1 line
2.51.0
#5 lore raw

Re: [PATCH bpf-next v9 4/7] bpf: Add BPF_F_CPU and BPF_F_ALL_CPUS flags support for percpu_hash and lru_percpu_hash maps

In reply to Leon Hwang
Quoted 70 lines · Leon Hwang

Introduce BPF_F_ALL_CPUS flag support for percpu_hash and lru_percpu_hash maps to allow updating values for all CPUs with a single value for both update_elem and update_batch APIs.

Introduce BPF_F_CPU flag support for percpu_hash and lru_percpu_hash maps to allow:

* update value for specified CPU for both update_elem and update_batch APIs.
* lookup value for specified CPU for both lookup_elem and lookup_batch APIs.

The BPF_F_CPU flag is passed via:

* map_flags along with embedded cpu info.
* elem_flags along with embedded cpu info.

---
 include/linux/bpf.h  |  4 ++-
 kernel/bpf/hashtab.c | 82 +++++++++++++++++++++++++++++---------------
 kernel/bpf/syscall.c |  2 +-
 3 files changed, 59 insertions(+), 29 deletions(-)
include/linux/bpf.h +3 -1
index 31498b445b447..b3d9a584f34e2 100644
@@ -2717,7 +2717,7 @@ int map_set_for_each_callback_args(struct bpf_verifier_env *env,
                                   struct bpf_func_state *caller,
                                   struct bpf_func_state *callee);
 
-int bpf_percpu_hash_copy(struct bpf_map *map, void *key, void *value);
+int bpf_percpu_hash_copy(struct bpf_map *map, void *key, void *value, u64 flags);
 int bpf_percpu_array_copy(struct bpf_map *map, void *key, void *value, u64 flags);
 int bpf_percpu_hash_update(struct bpf_map *map, void *key, void *value,
                           u64 flags);
@@ -3772,6 +3772,8 @@ static inline bool bpf_map_supports_cpu_flags(enum bpf_map_type map_type)
 {
        switch (map_type) {
        case BPF_MAP_TYPE_PERCPU_ARRAY:
+       case BPF_MAP_TYPE_PERCPU_HASH:
+       case BPF_MAP_TYPE_LRU_PERCPU_HASH:
                return true;
        default:
                return false;
kernel/bpf/hashtab.c +7 -3
index c2fcd0cd51e51..6fb28ba2406c4 100644
@@ -945,24 +945,32 @@ static void free_htab_elem(struct bpf_htab *htab, struct htab_elem *l)
 }
 
 static void pcpu_copy_value(struct bpf_htab *htab, void __percpu *pptr,
-                           void *value, bool onallcpus)
+                           void *value, bool onallcpus, u64 map_flags)
 {
        if (!onallcpus) {
                /* copy true value_size bytes */
                copy_map_value(&htab->map, this_cpu_ptr(pptr), value);
        } else {
-               u32 size = round_up(htab->map.value_size, 8);
-               int off = 0, cpu;
+               u32 size = (map_flags & (BPF_F_CPU | BPF_F_ALL_CPUS)) ?
+                       htab->map.value_size : round_up(htab->map.value_size, 8);
+               void *ptr;
+               int cpu;
+
+               if (map_flags & BPF_F_CPU) {

kernel/bpf/hashtab.c static void free_htab_elem(struct bpf_htab *htab, struct htab_elem *l) · line 967

Quoted 10 lines
kernel/bpf/hashtab.c +6 -2
+                       cpu = map_flags >> 32;
+                       memcpy(per_cpu_ptr(pptr, cpu), value, size);
+                       return;
+               }
 
                for_each_possible_cpu(cpu) {
-                       copy_map_value_long(&htab->map, per_cpu_ptr(pptr, cpu), value + off);
-                       off += size;
+                       ptr = (map_flags & BPF_F_ALL_CPUS) ? value : value + size * cpu;
+                       memcpy(per_cpu_ptr(pptr, cpu), ptr, size);

ok, so you fixed the value_size problem and at the same time introduced blind memcpy() problem?.. Per-CPU maps are allowed to have some special fields (see BPF_REFCOUNT and BPF_KPTR_* checks in map_check_btf()), which have to be handled specially inside copy_map_value[_long](), we cannot just memcpy() blindly

all the other places use copy_map_value[_long](), why did you decide to switch to memcpy here?

pw-bot: cr

Quoted 4 lines
kernel/bpf/hashtab.c +0 -0
                }
        }
 }
 

[...]

#9 lore raw

Re: [PATCH bpf-next v9 5/7] bpf: Add BPF_F_CPU and BPF_F_ALL_CPUS flags support for percpu_cgroup_storage maps

In reply to Leon Hwang
Quoted 69 lines · Leon Hwang

Introduce BPF_F_ALL_CPUS flag support for percpu_cgroup_storage maps to allow updating values for all CPUs with a single value for update_elem API.

Introduce BPF_F_CPU flag support for percpu_cgroup_storage maps to allow:

* update value for specified CPU for update_elem API.
* lookup value for specified CPU for lookup_elem API.

The BPF_F_CPU flag is passed via map_flags along with embedded cpu info.

---
 include/linux/bpf-cgroup.h |  4 ++--
 include/linux/bpf.h        |  1 +
 kernel/bpf/local_storage.c | 27 ++++++++++++++++++++-------
 kernel/bpf/syscall.c       |  2 +-
 4 files changed, 24 insertions(+), 10 deletions(-)
include/linux/bpf-cgroup.h +2 -2
index aedf573bdb426..013f4db9903fd 100644
@@ -172,7 +172,7 @@ void bpf_cgroup_storage_link(struct bpf_cgroup_storage *storage,
 void bpf_cgroup_storage_unlink(struct bpf_cgroup_storage *storage);
 int bpf_cgroup_storage_assign(struct bpf_prog_aux *aux, struct bpf_map *map);
 
-int bpf_percpu_cgroup_storage_copy(struct bpf_map *map, void *key, void *value);
+int bpf_percpu_cgroup_storage_copy(struct bpf_map *map, void *key, void *value, u64 flags);
 int bpf_percpu_cgroup_storage_update(struct bpf_map *map, void *key,
                                     void *value, u64 flags);
 
@@ -467,7 +467,7 @@ static inline struct bpf_cgroup_storage *bpf_cgroup_storage_alloc(
 static inline void bpf_cgroup_storage_free(
        struct bpf_cgroup_storage *storage) {}
 static inline int bpf_percpu_cgroup_storage_copy(struct bpf_map *map, void *key,
-                                                void *value) {
+                                                void *value, u64 flags) {
        return 0;
 }
 static inline int bpf_percpu_cgroup_storage_update(struct bpf_map *map,
include/linux/bpf.h +1 -0
index b3d9a584f34e2..6250804394b53 100644
@@ -3774,6 +3774,7 @@ static inline bool bpf_map_supports_cpu_flags(enum bpf_map_type map_type)
        case BPF_MAP_TYPE_PERCPU_ARRAY:
        case BPF_MAP_TYPE_PERCPU_HASH:
        case BPF_MAP_TYPE_LRU_PERCPU_HASH:
+       case BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE:
                return true;
        default:
                return false;
kernel/bpf/local_storage.c +1 -1
index c93a756e035c0..f5188e0afa478 100644
@@ -180,7 +180,7 @@ static long cgroup_storage_update_elem(struct bpf_map *map, void *key,
 }
 
 int bpf_percpu_cgroup_storage_copy(struct bpf_map *_map, void *key,
-                                  void *value)
+                                  void *value, u64 map_flags)
 {
        struct bpf_cgroup_storage_map *map = map_to_storage(_map);
        struct bpf_cgroup_storage *storage;

kernel/bpf/local_storage.c int bpf_percpu_cgroup_storage_copy(struct bpf_map *_map, void *key, · line 203

Quoted 6 lines
kernel/bpf/local_storage.c +3 -0
@@ -198,12 +198,18 @@ int bpf_percpu_cgroup_storage_copy(struct bpf_map *_map, void *key,
         * access 'value_size' of them, so copying rounded areas
         * will not leak any kernel data
         */
+       if (map_flags & BPF_F_CPU) {
+               cpu = map_flags >> 32;
+               memcpy(value, per_cpu_ptr(storage->percpu_buf, cpu), _map->value_size);

this is so far ok, because we don't seem to allow special fields for PERCPU_CGROUP_STORAGE, but it's best to switch this one to copy_map_value()

kernel/bpf/local_storage.c int bpf_percpu_cgroup_storage_copy(struct bpf_map *_map, void *key, · line 209

Quoted 6 lines
kernel/bpf/local_storage.c +2 -0
+               goto unlock;
+       }
        size = round_up(_map->value_size, 8);
        for_each_possible_cpu(cpu) {
                bpf_long_memcpy(value + off,
                                per_cpu_ptr(storage->percpu_buf, cpu), size);

and let's switch this to copy_map_value_long() to future-proof this:
copy_map_value[_long]() should work correctly with any type of map and will take care of all existing and future special fields

(but maybe have it as a separate patch with just that change to make it obvious)

Quoted 59 lines
kernel/bpf/local_storage.c +14 -6
                off += size;
        }
+unlock:
        rcu_read_unlock();
        return 0;
 }
@@ -213,10 +219,11 @@ int bpf_percpu_cgroup_storage_update(struct bpf_map *_map, void *key,
 {
        struct bpf_cgroup_storage_map *map = map_to_storage(_map);
        struct bpf_cgroup_storage *storage;
-       int cpu, off = 0;
+       void *ptr;
        u32 size;
+       int cpu;
 
-       if (map_flags != BPF_ANY && map_flags != BPF_EXIST)
+       if ((u32)map_flags & ~(BPF_ANY | BPF_EXIST | BPF_F_CPU | BPF_F_ALL_CPUS))
                return -EINVAL;
 
        rcu_read_lock();
@@ -232,12 +239,18 @@ int bpf_percpu_cgroup_storage_update(struct bpf_map *_map, void *key,
         * returned or zeros which were zero-filled by percpu_alloc,
         * so no kernel data leaks possible
         */
-       size = round_up(_map->value_size, 8);
+       size = (map_flags & (BPF_F_CPU | BPF_F_ALL_CPUS)) ? _map->value_size :
+               round_up(_map->value_size, 8);
+       if (map_flags & BPF_F_CPU) {
+               cpu = map_flags >> 32;
+               memcpy(per_cpu_ptr(storage->percpu_buf, cpu), value, size);
+               goto unlock;
+       }
        for_each_possible_cpu(cpu) {
-               bpf_long_memcpy(per_cpu_ptr(storage->percpu_buf, cpu),
-                               value + off, size);
-               off += size;
+               ptr = (map_flags & BPF_F_ALL_CPUS) ? value : value + size * cpu;
+               memcpy(per_cpu_ptr(storage->percpu_buf, cpu), ptr, size);
        }
+unlock:
        rcu_read_unlock();
        return 0;
 }
kernel/bpf/syscall.c +1 -2
index ce525a474656a..b654115c99e01 100644
@@ -320,7 +320,7 @@ static int bpf_map_copy_value(struct bpf_map *map, void *key, void *value,
        } else if (map->map_type == BPF_MAP_TYPE_PERCPU_ARRAY) {
                err = bpf_percpu_array_copy(map, key, value, flags);
        } else if (map->map_type == BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE) {
-               err = bpf_percpu_cgroup_storage_copy(map, key, value);
+               err = bpf_percpu_cgroup_storage_copy(map, key, value, flags);
        } else if (map->map_type == BPF_MAP_TYPE_STACK_TRACE) {
                err = bpf_stackmap_extract(map, key, value, false);
        } else if (IS_FD_ARRAY(map) || IS_FD_PROG_ARRAY(map)) {
--

2.51.0

author
#6 lore raw

Re: [PATCH bpf-next v9 4/7] bpf: Add BPF_F_CPU and BPF_F_ALL_CPUS flags support for percpu_hash and lru_percpu_hash maps

In reply to Andrii Nakryiko
Quoted 21 lines · Andrii Nakryiko
Quoted 20 lines · Leon Hwang

Introduce BPF_F_ALL_CPUS flag support for percpu_hash and lru_percpu_hash maps to allow updating values for all CPUs with a single value for both update_elem and update_batch APIs.

Introduce BPF_F_CPU flag support for percpu_hash and lru_percpu_hash maps to allow:

* update value for specified CPU for both update_elem and update_batch APIs.
* lookup value for specified CPU for both lookup_elem and lookup_batch APIs.

The BPF_F_CPU flag is passed via:

* map_flags along with embedded cpu info.
* elem_flags along with embedded cpu info.

---

[...]

Quoted 7 lines

kernel/bpf/hashtab.c static void free_htab_elem(struct bpf_htab *htab, struct htab_elem *l) · line 967

Quoted 6 lines
                for_each_possible_cpu(cpu) {
kernel/bpf/hashtab.c +2 -2
-                       copy_map_value_long(&htab->map, per_cpu_ptr(pptr, cpu), value + off);
-                       off += size;
+                       ptr = (map_flags & BPF_F_ALL_CPUS) ? value : value + size * cpu;
+                       memcpy(per_cpu_ptr(pptr, cpu), ptr, size);
Quoted 9 lines

ok, so you fixed the value_size problem and at the same time introduced blind memcpy() problem?.. Per-CPU maps are allowed to have some special fields (see BPF_REFCOUNT and BPF_KPTR_* checks in map_check_btf()), which have to be handled specially inside copy_map_value[_long](), we cannot just memcpy() blindly

all the other places use copy_map_value[_long](), why did you decide to switch to memcpy here?

You’re right — using memcpy() here is incorrect. I should be using copy_map_value() instead.

When comparing this path with bpf_percpu_array_update(), I noticed that bpf_obj_free_fields() is missing here. That was why I initially switched to memcpy().

To clarify:

1. If those special fields (like BPF_REFCOUNT or BPF_KPTR_*) are *not* supported here, memcpy() behaves the same as copy_map_value().

static inline void bpf_obj_memcpy(struct btf_record *rec,
void *dst, void *src, u32 size, bool long_memcpy)

{
        u32 curr_off = 0;
        int i;

        if (IS_ERR_OR_NULL(rec)) {
                if (long_memcpy)
                        bpf_long_memcpy(dst, src, round_up(size, 8));
                else
                        memcpy(dst, src, size);
                return;
        }

        ...
}

static inline void copy_map_value(struct bpf_map *map, void *dst, void *src)

{
        bpf_obj_memcpy(map->record, dst, src, map->value_size, false);
}

2. However, if those special fields *are* supported here, then missing bpf_obj_free_fields() seems like a real issue.
In that case, I’d like to send a separate patch set to add bpf_obj_free_fields() properly.
Does that sound reasonable?

Thanks,
Leon

[...]

author
#10 lore raw

Re: [PATCH bpf-next v9 5/7] bpf: Add BPF_F_CPU and BPF_F_ALL_CPUS flags support for percpu_cgroup_storage maps

In reply to Andrii Nakryiko
Quoted 16 lines · Andrii Nakryiko
Quoted 15 lines · Leon Hwang

Introduce BPF_F_ALL_CPUS flag support for percpu_cgroup_storage maps to allow updating values for all CPUs with a single value for update_elem API.

Introduce BPF_F_CPU flag support for percpu_cgroup_storage maps to allow:

* update value for specified CPU for update_elem API.
* lookup value for specified CPU for lookup_elem API.

The BPF_F_CPU flag is passed via map_flags along with embedded cpu info.

---

[...]

Quoted 9 lines
Quoted 9 lines

int bpf_percpu_cgroup_storage_copy(struct bpf_map *_map, void *key,

kernel/bpf/local_storage.c +1 -1
-                                  void *value)
+                                  void *value, u64 map_flags)
 {
        struct bpf_cgroup_storage_map *map = map_to_storage(_map);
        struct bpf_cgroup_storage *storage;
@@ -198,12 +198,18 @@ int bpf_percpu_cgroup_storage_copy(struct bpf_map *_map, void *key,
         * access 'value_size' of them, so copying rounded areas
         * will not leak any kernel data
Quoted 9 lines

kernel/bpf/local_storage.c int bpf_percpu_cgroup_storage_copy(struct bpf_map *_map, void *key, · line 203

Quoted 4 lines
kernel/bpf/local_storage.c +3 -0
         */
+       if (map_flags & BPF_F_CPU) {
+               cpu = map_flags >> 32;
+               memcpy(value, per_cpu_ptr(storage->percpu_buf, cpu), _map->value_size);

this is so far ok, because we don't seem to allow special fields for PERCPU_CGROUP_STORAGE, but it's best to switch this one to copy_map_value()

Agreed to use copy_map_value() here.

Quoted 7 lines

kernel/bpf/local_storage.c int bpf_percpu_cgroup_storage_copy(struct bpf_map *_map, void *key, · line 209

Quoted 6 lines
kernel/bpf/local_storage.c +2 -0
+               goto unlock;
+       }
        size = round_up(_map->value_size, 8);
        for_each_possible_cpu(cpu) {
                bpf_long_memcpy(value + off,
                                per_cpu_ptr(storage->percpu_buf, cpu), size);
Quoted 6 lines

and let's switch this to copy_map_value_long() to future-proof this:
copy_map_value[_long]() should work correctly with any type of map and will take care of all existing and future special fields

(but maybe have it as a separate patch with just that change to make it obvious)

Ack.

Quoted 30 lines
Quoted 30 lines
kernel/bpf/local_storage.c +9 -3
                off += size;
        }
+unlock:
        rcu_read_unlock();
        return 0;
 }
@@ -213,10 +219,11 @@ int bpf_percpu_cgroup_storage_update(struct bpf_map *_map, void *key,
 {
        struct bpf_cgroup_storage_map *map = map_to_storage(_map);
        struct bpf_cgroup_storage *storage;
-       int cpu, off = 0;
+       void *ptr;
        u32 size;
+       int cpu;
 
-       if (map_flags != BPF_ANY && map_flags != BPF_EXIST)
+       if ((u32)map_flags & ~(BPF_ANY | BPF_EXIST | BPF_F_CPU | BPF_F_ALL_CPUS))
                return -EINVAL;
 
        rcu_read_lock();
@@ -232,12 +239,18 @@ int bpf_percpu_cgroup_storage_update(struct bpf_map *_map, void *key,
         * returned or zeros which were zero-filled by percpu_alloc,
         * so no kernel data leaks possible
         */
-       size = round_up(_map->value_size, 8);
+       size = (map_flags & (BPF_F_CPU | BPF_F_ALL_CPUS)) ? _map->value_size :
+               round_up(_map->value_size, 8);
+       if (map_flags & BPF_F_CPU) {
+               cpu = map_flags >> 32;
+               memcpy(per_cpu_ptr(storage->percpu_buf, cpu), value, size);
Quoted 8 lines

kernel/bpf/local_storage.c int bpf_percpu_cgroup_storage_update(struct bpf_map *_map, void *key, · line 251

Quoted 8 lines
kernel/bpf/local_storage.c +4 -3
+               goto unlock;
+       }
        for_each_possible_cpu(cpu) {
-               bpf_long_memcpy(per_cpu_ptr(storage->percpu_buf, cpu),
-                               value + off, size);
-               off += size;
+               ptr = (map_flags & BPF_F_ALL_CPUS) ? value : value + size * cpu;
+               memcpy(per_cpu_ptr(storage->percpu_buf, cpu), ptr, size);

Switch memcpy() to copy_map_value[_long](), too.

Thanks,
Leon

[...]

#7 lore raw

Re: [PATCH bpf-next v9 4/7] bpf: Add BPF_F_CPU and BPF_F_ALL_CPUS flags support for percpu_hash and lru_percpu_hash maps

In reply to Leon Hwang
Quoted 81 lines · Leon Hwang
Quoted 21 lines · Andrii Nakryiko
Quoted 20 lines · Leon Hwang

Introduce BPF_F_ALL_CPUS flag support for percpu_hash and lru_percpu_hash maps to allow updating values for all CPUs with a single value for both update_elem and update_batch APIs.

Introduce BPF_F_CPU flag support for percpu_hash and lru_percpu_hash maps to allow:

* update value for specified CPU for both update_elem and update_batch APIs.
* lookup value for specified CPU for both lookup_elem and lookup_batch APIs.

The BPF_F_CPU flag is passed via:

* map_flags along with embedded cpu info.
* elem_flags along with embedded cpu info.

---

[...]

Quoted 7 lines

kernel/bpf/hashtab.c static void free_htab_elem(struct bpf_htab *htab, struct htab_elem *l) · line 967

Quoted 6 lines
                for_each_possible_cpu(cpu) {
kernel/bpf/hashtab.c +2 -2
-                       copy_map_value_long(&htab->map, per_cpu_ptr(pptr, cpu), value + off);
-                       off += size;
+                       ptr = (map_flags & BPF_F_ALL_CPUS) ? value : value + size * cpu;
+                       memcpy(per_cpu_ptr(pptr, cpu), ptr, size);
Quoted 9 lines

ok, so you fixed the value_size problem and at the same time introduced blind memcpy() problem?.. Per-CPU maps are allowed to have some special fields (see BPF_REFCOUNT and BPF_KPTR_* checks in map_check_btf()), which have to be handled specially inside copy_map_value[_long](), we cannot just memcpy() blindly

all the other places use copy_map_value[_long](), why did you decide to switch to memcpy here?

You’re right — using memcpy() here is incorrect. I should be using copy_map_value() instead.

When comparing this path with bpf_percpu_array_update(), I noticed that bpf_obj_free_fields() is missing here. That was why I initially switched to memcpy().

To clarify:

1. If those special fields (like BPF_REFCOUNT or BPF_KPTR_*) are *not* supported here, memcpy() behaves the same as copy_map_value().

static inline void bpf_obj_memcpy(struct btf_record *rec,
void *dst, void *src, u32 size, bool long_memcpy)

{
        u32 curr_off = 0;
        int i;

        if (IS_ERR_OR_NULL(rec)) {
                if (long_memcpy)
                        bpf_long_memcpy(dst, src, round_up(size, 8));
                else
                        memcpy(dst, src, size);
                return;
        }

        ...
}

static inline void copy_map_value(struct bpf_map *map, void *dst, void *src)

{
        bpf_obj_memcpy(map->record, dst, src, map->value_size, false);
}
Quoted 5 lines

2. However, if those special fields *are* supported here, then missing bpf_obj_free_fields() seems like a real issue.
In that case, I’d like to send a separate patch set to add bpf_obj_free_fields() properly.
Does that sound reasonable?

Add a test and we'll know for sure? But it looks like yes, you can use *some* special fields for per-CPU maps.

Quoted 5 lines

Thanks,
Leon

[...]