Skip to contentSkip to conversation

Add SDCA class driver

PATCH Superseded Charles Keepax 6 participants 19 messages Nov 6, 2025 – Nov 21, 2025

Subsystems (4)

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore

Charles Keepax

author maintainer
#0 lore raw

v3 cover Add SDCA class driver

This series adds an initial SDCA class driver, this consists of a primary driver attached to the SoundWire device, and auxiliary drivers representing each of the functions of the SDCA device. These drivers all use the APIs added over the past series's to provide the class functionality, as such these final drivers themselves are quite thin.

Also a few fix ups at the start of the series that have gathered up whilst the last SDCA series was in review.

Thanks,
Charles

Changes since v2:
- Updated the locking in sdca_fdl_process
- Correct some spelling in comments
- Renamed suspend/resume functions to be a little short

Changes since v1:
- Add a bunch of bug fix patches
- Change some prints to dbgs
- Add some additional comments
- Flip order on regcache operations in resume

Charles Keepax (12):
ASoC: SDCA: Remove duplicated module macros
ASoC: SDCA: Fix missing dash in HIDE DisCo property
ASoC: SDCA: Add missing forward declaration in header
ASoC: SDCA: Correct FDL locking in sdca_fdl_process()
ASoC: SDCA: Add comment for function reset polling
ASoC: SDCA: Move most of the messages from info to debug
ASoC: SDCA: Use helper macros for control identification
ASoC: SDCA: Factor out helper to process Control defaults
ASoC: SDCA: Populate regmap cache for readable Controls
ASoC: SDCA: Add helper to write initialization writes
ASoC: SDCA: Add basic SDCA class driver
ASoC: SDCA: Add basic SDCA function driver

Pierre-Louis Bossart (1):
ASoC: SDCA: add function devices

 include/linux/soundwire/sdw_registers.h |   2 +
 include/sound/sdca.h                    |  14 +
 include/sound/sdca_regmap.h             |   2 +
 sound/soc/sdca/Kconfig                  |  18 +
 sound/soc/sdca/Makefile                 |  10 +-
 sound/soc/sdca/sdca_class.c             | 304 ++++++++++++++++
 sound/soc/sdca/sdca_class.h             |  37 ++
 sound/soc/sdca/sdca_class_function.c    | 460 ++++++++++++++++++++++++
 sound/soc/sdca/sdca_fdl.c               |   8 +-
 sound/soc/sdca/sdca_function_device.c   | 117 ++++++
 sound/soc/sdca/sdca_function_device.h   |  15 +
 sound/soc/sdca/sdca_functions.c         |  52 ++-
 sound/soc/sdca/sdca_hid.c               |   3 -
 sound/soc/sdca/sdca_interrupts.c        |  39 +-
 sound/soc/sdca/sdca_regmap.c            |  89 +++--
 15 files changed, 1089 insertions(+), 81 deletions(-)
 create mode 100644 sound/soc/sdca/sdca_class.c
 create mode 100644 sound/soc/sdca/sdca_class.h
 create mode 100644 sound/soc/sdca/sdca_class_function.c
 create mode 100644 sound/soc/sdca/sdca_function_device.c
 create mode 100644 sound/soc/sdca/sdca_function_device.h
Signature · 1 line
2.47.3
author maintainer
#1 lore raw

PATCH v3 1/13 ASoC: SDCA: Remove duplicated module macros

Both HID and the IRQ are now build into the wider SDCA kernel module, so their module macros are redundant, remove them.

Fixes 5030abcb0aa3 ("ASoC: SDCA: Pull HID and IRQ into the primary SDCA module")

---

No changes since v2.

 sound/soc/sdca/sdca_hid.c        | 3 ---
 sound/soc/sdca/sdca_interrupts.c | 3 ---
 2 files changed, 6 deletions(-)
sound/soc/sdca/sdca_hid.c +0 -3
index ad53207b0d62b..abbd56a3d2971 100644
@@ -166,6 +166,3 @@ int sdca_hid_process_report(struct sdca_interrupt *interrupt)
 	return 0;
 }
 EXPORT_SYMBOL_NS(sdca_hid_process_report, "SND_SOC_SDCA");
-
-MODULE_LICENSE("Dual BSD/GPL");
-MODULE_DESCRIPTION("SDCA HID library");
sound/soc/sdca/sdca_interrupts.c +0 -3
index 5176460416bbe..a18ec9dd3398b 100644
@@ -618,6 +618,3 @@ struct sdca_interrupt_info *sdca_irq_allocate(struct device *sdev,
 	return info;
 }
 EXPORT_SYMBOL_NS_GPL(sdca_irq_allocate, "SND_SOC_SDCA");
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("SDCA IRQ library");
Signature · 1 line
2.47.3
author maintainer
#2 lore raw

PATCH v3 2/13 ASoC: SDCA: Fix missing dash in HIDE DisCo property

In reply to Charles Keepax

The property name is "mipi-sdca-RxUMP-ownership-transition-max-delay", with a dash between max and delay. Add the missing dash.

Fixes 13ef21dffe76 ("ASoC: SDCA: add support for HIDE entity properties and HID descriptor/report")

---

No changes since v2.

 sound/soc/sdca/sdca_functions.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
sound/soc/sdca/sdca_functions.c +1 -1
index b2e3fab9bd959..8ebc5161c9f85 100644
@@ -1321,7 +1321,7 @@ find_sdca_entity_hide(struct device *dev, struct sdw_slave *sdw,
 	unsigned char *report_desc = NULL;
 
 	ret = fwnode_property_read_u32(entity_node,
-				       "mipi-sdca-RxUMP-ownership-transition-maxdelay", &delay);
+				       "mipi-sdca-RxUMP-ownership-transition-max-delay", &delay);
 	if (!ret)
 		hide->max_delay = delay;
 
Signature · 1 line
2.47.3
author maintainer
#3 lore raw

PATCH v3 3/13 ASoC: SDCA: Add missing forward declaration in header

In reply to Charles Keepax

The structure sdca_function_desc contains a fwnode_handle which is undefined if the user doesn't pull in an appropriate header. Add a forward declaration to avoid this.

Fixes 996bf834d0b6 ("ASoC: SDCA: Add code to parse Function information")

---

No changes since v2.

 include/sound/sdca.h | 1 +
 1 file changed, 1 insertion(+)
include/sound/sdca.h +1 -0
index d38cdbfeb35f5..d58d602212771 100644
@@ -13,6 +13,7 @@
 #include <linux/kconfig.h>
 
 struct acpi_table_swft;
+struct fwnode_handle;
 struct sdw_slave;
 
 #define SDCA_MAX_FUNCTION_COUNT 8
Signature · 1 line
2.47.3
author maintainer
#4 lore raw

PATCH v3 4/13 ASoC: SDCA: Correct FDL locking in sdca_fdl_process()

In reply to Charles Keepax

The current locking in sdca_fdl_process() locks over sdca_ump_cancel_timeout() and the timeout work function takes the same lock, this can lead to a deadlock if the work runs as part of the cancel. To fix this move the guard() call to below the cancel timeout, putting it outside the lock.

Fixes e92e25f77748 ("ASoC: SDCA: Add UMP timeout handling for FDL")

---

Changes since v2:
- Switched back to guard() and just moved it down a little.

 sound/soc/sdca/sdca_fdl.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
sound/soc/sdca/sdca_fdl.c +2 -2
index cb79dc3131b82..bc88d24d63d7f 100644
@@ -402,8 +402,6 @@ int sdca_fdl_process(struct sdca_interrupt *interrupt)
 	unsigned int reg, status;
 	int response, ret;
 
-	guard(mutex)(&fdl_state->lock);
-
 	ret = sdca_ump_get_owner_host(dev, interrupt->function_regmap,
 				      interrupt->function, interrupt->entity,
 				      interrupt->control);
@@ -412,6 +410,8 @@ int sdca_fdl_process(struct sdca_interrupt *interrupt)
 
 	sdca_ump_cancel_timeout(&fdl_state->timeout);
 
+	guard(mutex)(&fdl_state->lock);
+
 	reg = SDW_SDCA_CTL(interrupt->function->desc->adr, interrupt->entity->id,
 			   SDCA_CTL_XU_FDL_STATUS, 0);
 	ret = regmap_read(interrupt->function_regmap, reg, &status);
Signature · 1 line
2.47.3
author maintainer
#5 lore raw

PATCH v3 5/13 ASoC: SDCA: Add comment for function reset polling

In reply to Charles Keepax

Add a comment to better explain the function reset polling rate.

---

Changes since v2:
- Correct some spelling

 sound/soc/sdca/sdca_fdl.c | 4 ++++
 1 file changed, 4 insertions(+)
sound/soc/sdca/sdca_fdl.c +4 -0
index bc88d24d63d7f..03789d6985f2d 100644
@@ -51,6 +51,10 @@ int sdca_reset_function(struct device *dev, struct sdca_function_data *function,
 		return -EINVAL;
 	}
 
+	/*
+	 * Poll up to 16 times but no more than once per ms, these are just
+	 * arbitrarily selected values, so may be fine tuned in future.
+	 */
 	poll_us = umin(function->reset_max_delay >> 4, 1000);
 
 	ret = regmap_read_poll_timeout(regmap, reg, val, !val, poll_us,
Signature · 1 line
2.47.3
author maintainer
#6 lore raw

PATCH v3 6/13 ASoC: SDCA: Move most of the messages from info to debug

In reply to Charles Keepax

The SDCA code is very spammy on boot as it prints a lot of parsing details using info prints. Now primary development is complete move these to debug prints to reduce the spam.

---

No changes since v2.

 sound/soc/sdca/sdca_functions.c | 50 ++++++++++++++++-----------------
 1 file changed, 24 insertions(+), 26 deletions(-)
sound/soc/sdca/sdca_functions.c +24 -26
index 8ebc5161c9f85..417194909abd5 100644
@@ -6,8 +6,6 @@
  * https://www.mipi.org/mipi-sdca-v1-0-download
  */
 
-#define dev_fmt(fmt) "%s: " fmt, __func__
-
 #include <linux/acpi.h>
 #include <linux/byteorder/generic.h>
 #include <linux/cleanup.h>
@@ -1010,10 +1008,10 @@ static int find_sdca_entity_control(struct device *dev, struct sdca_entity *enti
 	control->type = find_sdca_control_datatype(entity, control);
 	control->nbits = find_sdca_control_bits(entity, control);
 
-	dev_info(dev, "%s: %s: control %#x mode %#x layers %#x cn %#llx int %d %s\n",
-		 entity->label, control->label, control->sel,
-		 control->mode, control->layers, control->cn_list,
-		 control->interrupt_position, control->deferrable ? "deferrable" : "");
+	dev_dbg(dev, "%s: %s: control %#x mode %#x layers %#x cn %#llx int %d %s\n",
+		entity->label, control->label, control->sel,
+		control->mode, control->layers, control->cn_list,
+		control->interrupt_position, control->deferrable ? "deferrable" : "");
 
 	return 0;
 }
@@ -1134,9 +1132,9 @@ static int find_sdca_entity_iot(struct device *dev,
 	if (!ret)
 		terminal->num_transducer = tmp;
 
-	dev_info(dev, "%s: terminal type %#x ref %#x conn %#x count %d\n",
-		 entity->label, terminal->type, terminal->reference,
-		 terminal->connector, terminal->num_transducer);
+	dev_dbg(dev, "%s: terminal type %#x ref %#x conn %#x count %d\n",
+		entity->label, terminal->type, terminal->reference,
+		terminal->connector, terminal->num_transducer);
 
 	return 0;
 }
@@ -1162,8 +1160,8 @@ static int find_sdca_entity_cs(struct device *dev,
 	if (!ret)
 		clock->max_delay = tmp;
 
-	dev_info(dev, "%s: clock type %#x delay %d\n", entity->label,
-		 clock->type, clock->max_delay);
+	dev_dbg(dev, "%s: clock type %#x delay %d\n", entity->label,
+		clock->type, clock->max_delay);
 
 	return 0;
 }
@@ -1214,8 +1212,8 @@ static int find_sdca_entity_pde(struct device *dev,
 		delays[i].to_ps = delay_list[j++];
 		delays[i].us = delay_list[j++];
 
-		dev_info(dev, "%s: from %#x to %#x delay %dus\n", entity->label,
-			 delays[i].from_ps, delays[i].to_ps, delays[i].us);
+		dev_dbg(dev, "%s: from %#x to %#x delay %dus\n", entity->label,
+			delays[i].from_ps, delays[i].to_ps, delays[i].us);
 	}
 
 	power->num_max_delay = num_delays;
@@ -1444,8 +1442,8 @@ static int find_sdca_entity(struct device *dev, struct sdw_slave *sdw,
 
 	entity->type = tmp;
 
-	dev_info(dev, "%s: entity %#x type %#x\n",
-		 entity->label, entity->id, entity->type);
+	dev_dbg(dev, "%s: entity %#x type %#x\n",
+		entity->label, entity->id, entity->type);
 
 	switch (entity->type) {
 	case SDCA_ENTITY_TYPE_IT:
@@ -1620,7 +1618,7 @@ static int find_sdca_entity_connection_iot(struct device *dev,
 
 	terminal->clock = clock_entity;
 
-	dev_info(dev, "%s -> %s\n", clock_entity->label, entity->label);
+	dev_dbg(dev, "%s -> %s\n", clock_entity->label, entity->label);
 
 	fwnode_handle_put(clock_node);
 	return 0;
@@ -1670,7 +1668,7 @@ static int find_sdca_entity_connection_pde(struct device *dev,
 			return -EINVAL;
 		}
 
-		dev_info(dev, "%s -> %s\n", managed[i]->label, entity->label);
+		dev_dbg(dev, "%s -> %s\n", managed[i]->label, entity->label);
 	}
 
 	power->num_managed = num_managed;
@@ -1805,7 +1803,7 @@ static int find_sdca_entity_connection(struct device *dev,
 
 		pins[i] = connected_entity;
 
-		dev_info(dev, "%s -> %s\n", connected_entity->label, entity->label);
+		dev_dbg(dev, "%s -> %s\n", connected_entity->label, entity->label);
 
 		i++;
 		fwnode_handle_put(connected_node);
@@ -1890,8 +1888,8 @@ static int find_sdca_cluster_channel(struct device *dev,
 
 	channel->relationship = tmp;
 
-	dev_info(dev, "cluster %#x: channel id %#x purpose %#x relationship %#x\n",
-		 cluster->id, channel->id, channel->purpose, channel->relationship);
+	dev_dbg(dev, "cluster %#x: channel id %#x purpose %#x relationship %#x\n",
+		cluster->id, channel->id, channel->purpose, channel->relationship);
 
 	return 0;
 }
@@ -2062,7 +2060,7 @@ static int find_sdca_filesets(struct device *dev, struct sdw_slave *sdw,
 			return -EINVAL;
 		}
 
-		dev_info(dev, "fileset: %#x\n", filesets_list[i]);
+		dev_dbg(dev, "fileset: %#x\n", filesets_list[i]);
 
 		files = devm_kcalloc(dev, num_entries / mult_fileset,
 				     sizeof(struct sdca_fdl_file), GFP_KERNEL);
@@ -2083,8 +2081,8 @@ static int find_sdca_filesets(struct device *dev, struct sdw_slave *sdw,
 			file->file_id = fileset_entries[j++];
 			file->fdl_offset = fileset_entries[j++];
 
-			dev_info(dev, "file: %#x, vendor: %#x, offset: %#x\n",
-				 file->file_id, file->vendor_id, file->fdl_offset);
+			dev_dbg(dev, "file: %#x, vendor: %#x, offset: %#x\n",
+				file->file_id, file->vendor_id, file->fdl_offset);
 		}
 
 		set->id = filesets_list[i];
@@ -2127,9 +2125,9 @@ int sdca_parse_function(struct device *dev, struct sdw_slave *sdw,
 	if (!ret)
 		function->reset_max_delay = tmp;
 
-	dev_info(dev, "%pfwP: name %s busy delay %dus reset delay %dus\n",
-		 function->desc->node, function->desc->name,
-		 function->busy_max_delay, function->reset_max_delay);
+	dev_dbg(dev, "%pfwP: name %s busy delay %dus reset delay %dus\n",
+		function->desc->node, function->desc->name,
+		function->busy_max_delay, function->reset_max_delay);
 
 	ret = find_sdca_init_table(dev, function_desc->node, function);
 	if (ret)
Signature · 1 line
2.47.3
author maintainer
#7 lore raw

PATCH v3 7/13 ASoC: SDCA: Use helper macros for control identification

In reply to Charles Keepax

We have the SDCA_CTL_TYPE helper macros, we should use them when identifying specific controls to simplify the code a little.

---

No changes since v2.

 sound/soc/sdca/sdca_interrupts.c | 36 +++++++++++++-------------------
 1 file changed, 14 insertions(+), 22 deletions(-)
sound/soc/sdca/sdca_interrupts.c +14 -22
index a18ec9dd3398b..8f6a2adfb6fbe 100644
@@ -456,11 +456,8 @@ int sdca_irq_populate_early(struct device *dev, struct regmap *regmap,
 			else if (!interrupt)
 				continue;
 
-			switch (entity->type) {
-			case SDCA_ENTITY_TYPE_XU:
-				if (control->sel != SDCA_CTL_XU_FDL_CURRENTOWNER)
-					break;
-
+			switch (SDCA_CTL_TYPE(entity->type, control->sel)) {
+			case SDCA_CTL_TYPE_S(XU, FDL_CURRENTOWNER):
 				ret = sdca_irq_data_populate(dev, regmap, NULL,
 							     function, entity,
 							     control, interrupt);
@@ -534,27 +531,22 @@ int sdca_irq_populate(struct sdca_function_data *function,
 
 			handler = base_handler;
 
-			switch (entity->type) {
-			case SDCA_ENTITY_TYPE_ENTITY_0:
-				if (control->sel == SDCA_CTL_ENTITY_0_FUNCTION_STATUS)
-					handler = function_status_handler;
+			switch (SDCA_CTL_TYPE(entity->type, control->sel)) {
+			case SDCA_CTL_TYPE_S(ENTITY_0, FUNCTION_STATUS):
+				handler = function_status_handler;
 				break;
-			case SDCA_ENTITY_TYPE_GE:
-				if (control->sel == SDCA_CTL_GE_DETECTED_MODE)
-					handler = detected_mode_handler;
+			case SDCA_CTL_TYPE_S(GE, DETECTED_MODE):
+				handler = detected_mode_handler;
 				break;
-			case SDCA_ENTITY_TYPE_XU:
-				if (control->sel == SDCA_CTL_XU_FDL_CURRENTOWNER) {
-					ret = sdca_fdl_alloc_state(interrupt);
-					if (ret)
-						return ret;
+			case SDCA_CTL_TYPE_S(XU, FDL_CURRENTOWNER):
+				ret = sdca_fdl_alloc_state(interrupt);
+				if (ret)
+					return ret;
 
-					handler = fdl_owner_handler;
-				}
+				handler = fdl_owner_handler;
 				break;
-			case SDCA_ENTITY_TYPE_HIDE:
-				if (control->sel == SDCA_CTL_HIDE_HIDTX_CURRENTOWNER)
-					handler = hid_handler;
+			case SDCA_CTL_TYPE_S(HIDE, HIDTX_CURRENTOWNER):
+				handler = hid_handler;
 				break;
 			default:
 				break;
Signature · 1 line
2.47.3
author maintainer
#8 lore raw

PATCH v3 8/13 ASoC: SDCA: Factor out helper to process Control defaults

In reply to Charles Keepax

The indentation of the loop processing writing out SDCA Control default values is getting a bit large. Reduce indentation and make adding more functionality easier by factoring out the Control handling into a helper function.

---

No changes since v2.

 sound/soc/sdca/sdca_regmap.c | 61 +++++++++++++++++++++++-------------
 1 file changed, 39 insertions(+), 22 deletions(-)
sound/soc/sdca/sdca_regmap.c +39 -22
index 8fa138fca00ff..5104ae99df33a 100644
@@ -275,6 +275,40 @@ int sdca_regmap_populate_constants(struct device *dev,
 }
 EXPORT_SYMBOL_NS(sdca_regmap_populate_constants, "SND_SOC_SDCA");
 
+static int populate_control_defaults(struct device *dev, struct regmap *regmap,
+				     struct sdca_function_data *function,
+				     struct sdca_entity *entity,
+				     struct sdca_control *control)
+{
+	int i, ret;
+	int cn;
+
+	if (control->mode == SDCA_ACCESS_MODE_DC)
+		return 0;
+
+	if (!control->has_default && !control->has_fixed)
+		return 0;
+
+	i = 0;
+	for_each_set_bit(cn, (unsigned long *)&control->cn_list,
+			 BITS_PER_TYPE(control->cn_list)) {
+		unsigned int reg;
+
+		reg = SDW_SDCA_CTL(function->desc->adr, entity->id, control->sel, cn);
+
+		ret = regmap_write(regmap, reg, control->values[i]);
+		if (ret) {
+			dev_err(dev, "Failed to write default %#x: %d\n",
+				reg, ret);
+			return ret;
+		}
+
+		i++;
+	}
+
+	return 0;
+}
+
 /**
  * sdca_regmap_write_defaults - write out DisCo defaults to device
  * @dev: Pointer to the device.
@@ -290,7 +324,7 @@ EXPORT_SYMBOL_NS(sdca_regmap_populate_constants, "SND_SOC_SDCA");
 int sdca_regmap_write_defaults(struct device *dev, struct regmap *regmap,
 			       struct sdca_function_data *function)
 {
-	int i, j, k;
+	int i, j;
 	int ret;
 
 	for (i = 0; i < function->num_entities; i++) {
@@ -298,28 +332,11 @@ int sdca_regmap_write_defaults(struct device *dev, struct regmap *regmap,
 
 		for (j = 0; j < entity->num_controls; j++) {
 			struct sdca_control *control = &entity->controls[j];
-			int cn;
-
-			if (control->mode == SDCA_ACCESS_MODE_DC)
-				continue;
 
-			if (!control->has_default && !control->has_fixed)
-				continue;
-
-			k = 0;
-			for_each_set_bit(cn, (unsigned long *)&control->cn_list,
-					 BITS_PER_TYPE(control->cn_list)) {
-				unsigned int reg;
-
-				reg = SDW_SDCA_CTL(function->desc->adr, entity->id,
-						   control->sel, cn);
-
-				ret = regmap_write(regmap, reg, control->values[k]);
-				if (ret)
-					return ret;
-
-				k++;
-			}
+			ret = populate_control_defaults(dev, regmap, function,
+							entity, control);
+			if (ret)
+				return ret;
 		}
 	}
 
Signature · 1 line
2.47.3
author maintainer
#9 lore raw

PATCH v3 9/13 ASoC: SDCA: Populate regmap cache for readable Controls

In reply to Charles Keepax

It is not uncommon for an SDCA Control to have no specified default value in the DisCo. Non-volatile registers with no defaults will not be present in the cache until they are accessed. However, if the first operation user-space performs is a read whilst the device is runtime suspended this read will fail.

To avoid such problems we should populate values from the hardware into the cache for all non-volatile readable registers with no defaults. Update the defaults handling to do this cache population since it is iterating over the Controls and happens at a time the hardware is always powered up.

---

No changes since v2.

 sound/soc/sdca/sdca_regmap.c | 32 ++++++++++++++++++++++----------
 1 file changed, 22 insertions(+), 10 deletions(-)
sound/soc/sdca/sdca_regmap.c +22 -10
index 5104ae99df33a..6fbb241d9d357 100644
@@ -286,24 +286,33 @@ static int populate_control_defaults(struct device *dev, struct regmap *regmap,
 	if (control->mode == SDCA_ACCESS_MODE_DC)
 		return 0;
 
-	if (!control->has_default && !control->has_fixed)
+	if (control->layers & SDCA_ACCESS_LAYER_DEVICE)
 		return 0;
 
 	i = 0;
 	for_each_set_bit(cn, (unsigned long *)&control->cn_list,
 			 BITS_PER_TYPE(control->cn_list)) {
-		unsigned int reg;
+		unsigned int reg, val;
 
 		reg = SDW_SDCA_CTL(function->desc->adr, entity->id, control->sel, cn);
 
-		ret = regmap_write(regmap, reg, control->values[i]);
-		if (ret) {
-			dev_err(dev, "Failed to write default %#x: %d\n",
-				reg, ret);
-			return ret;
-		}
+		if (control->has_default || control->has_fixed) {
+			ret = regmap_write(regmap, reg, control->values[i]);
+			if (ret) {
+				dev_err(dev, "Failed to write default %#x: %d\n",
+					reg, ret);
+				return ret;
+			}
 
-		i++;
+			i++;
+		} else if (!control->is_volatile) {
+			ret = regmap_read(regmap, reg, &val);
+			if (ret) {
+				dev_err(dev, "Failed to read initial %#x: %d\n",
+					reg, ret);
+				return ret;
+			}
+		}
 	}
 
 	return 0;
@@ -317,7 +326,10 @@ static int populate_control_defaults(struct device *dev, struct regmap *regmap,
  *
  * This function will write out to the hardware all the DisCo default and
  * fixed value controls. This will cause them to be populated into the cache,
- * and subsequent handling can be done through a cache sync.
+ * and subsequent handling can be done through a cache sync. It will also
+ * read any non-volatile registers that don't have defaults/fixed values to
+ * populate those into the cache, this ensures they are available for reads
+ * even when the device is runtime suspended.
  *
  * Return: Returns zero on success, and a negative error code on failure.
  */
Signature · 1 line
2.47.3
author maintainer
#10 lore raw

PATCH v3 10/13 ASoC: SDCA: Add helper to write initialization writes

In reply to Charles Keepax

Add a helper function to write out the SDCA blind initialization writes.

---

No changes since v2.

 include/sound/sdca_regmap.h  |  2 ++
 sound/soc/sdca/sdca_regmap.c | 16 ++++++++++++++++
 2 files changed, 18 insertions(+)
include/sound/sdca_regmap.h +2 -0
index b2e3c2ad2bb88..792540a530fc4 100644
@@ -27,5 +27,7 @@ int sdca_regmap_populate_constants(struct device *dev, struct sdca_function_data
 
 int sdca_regmap_write_defaults(struct device *dev, struct regmap *regmap,
 			       struct sdca_function_data *function);
+int sdca_regmap_write_init(struct device *dev, struct regmap *regmap,
+			   struct sdca_function_data *function);
 
 #endif // __SDCA_REGMAP_H__
sound/soc/sdca/sdca_regmap.c +16 -0
index 6fbb241d9d357..2cca9a9c71ea9 100644
@@ -355,3 +355,19 @@ int sdca_regmap_write_defaults(struct device *dev, struct regmap *regmap,
 	return 0;
 }
 EXPORT_SYMBOL_NS(sdca_regmap_write_defaults, "SND_SOC_SDCA");
+
+int sdca_regmap_write_init(struct device *dev, struct regmap *regmap,
+			   struct sdca_function_data *function)
+{
+	struct sdca_init_write *init = function->init_table;
+	int ret, i;
+
+	for (i = 0; i < function->num_init_table; i++) {
+		ret = regmap_write(regmap, init[i].addr, init[i].val);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_NS(sdca_regmap_write_init, "SND_SOC_SDCA");
Signature · 1 line
2.47.3
author maintainer
#11 lore raw

PATCH v3 11/13 ASoC: SDCA: add function devices

In reply to Charles Keepax

From: Pierre-Louis Bossart <[email protected]>

Use the auxiliary bus to register/unregister subdevices for each function. Each function will be handled with a separate driver, matched using a name.

If a vendor wants to override a specific function driver, they could use a custom name to match with a custom function driver.

---

No changes since v2.

 include/sound/sdca.h                  |  13 +++
 sound/soc/sdca/Kconfig                |   1 +
 sound/soc/sdca/Makefile               |   4 +-
 sound/soc/sdca/sdca_function_device.c | 117 ++++++++++++++++++++++++++
 sound/soc/sdca/sdca_function_device.h |  15 ++++
 5 files changed, 148 insertions(+), 2 deletions(-)
 create mode 100644 sound/soc/sdca/sdca_function_device.c
 create mode 100644 sound/soc/sdca/sdca_function_device.h
include/sound/sdca.h +13 -0
index d58d602212771..67ff3c88705d5 100644
@@ -15,18 +15,21 @@
 struct acpi_table_swft;
 struct fwnode_handle;
 struct sdw_slave;
+struct sdca_dev;
 
 #define SDCA_MAX_FUNCTION_COUNT 8
 
 /**
  * struct sdca_function_desc - short descriptor for an SDCA Function
  * @node: firmware node for the Function.
+ * @func_dev: pointer to SDCA function device.
  * @name: Human-readable string.
  * @type: Function topology type.
  * @adr: ACPI address (used for SDCA register access).
  */
 struct sdca_function_desc {
 	struct fwnode_handle *node;
+	struct sdca_dev *func_dev;
 	const char *name;
 	u32 type;
 	u8 adr;
@@ -59,6 +62,8 @@ void sdca_lookup_functions(struct sdw_slave *slave);
 void sdca_lookup_swft(struct sdw_slave *slave);
 void sdca_lookup_interface_revision(struct sdw_slave *slave);
 bool sdca_device_quirk_match(struct sdw_slave *slave, enum sdca_quirk quirk);
+int sdca_dev_register_functions(struct sdw_slave *slave);
+void sdca_dev_unregister_functions(struct sdw_slave *slave);
 
 #else
 
@@ -69,6 +74,14 @@ static inline bool sdca_device_quirk_match(struct sdw_slave *slave, enum sdca_qu
 {
 	return false;
 }
+
+static inline int sdca_dev_register_functions(struct sdw_slave *slave)
+{
+	return 0;
+}
+
+static inline void sdca_dev_unregister_functions(struct sdw_slave *slave) {}
+
 #endif
 
 #endif
sound/soc/sdca/Kconfig +1 -0
index a73920d07073e..e7f36d668f159 100644
@@ -4,6 +4,7 @@ menu "SoundWire (SDCA)"
 config SND_SOC_SDCA
 	tristate
 	depends on ACPI
+	select AUXILIARY_BUS
 	help
 	  This option enables support for the MIPI SoundWire Device
 	  Class for Audio (SDCA).
sound/soc/sdca/Makefile +2 -2
index be911c399bbde..babe3fa2bb3ff 100644
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 
-snd-soc-sdca-y := sdca_functions.o sdca_device.o sdca_regmap.o sdca_asoc.o \
-		  sdca_ump.o
+snd-soc-sdca-y := sdca_functions.o sdca_device.o sdca_function_device.o \
+		  sdca_regmap.o sdca_asoc.o sdca_ump.o
 snd-soc-sdca-$(CONFIG_SND_SOC_SDCA_HID) += sdca_hid.o
 snd-soc-sdca-$(CONFIG_SND_SOC_SDCA_IRQ) += sdca_interrupts.o
 snd-soc-sdca-$(CONFIG_SND_SOC_SDCA_FDL) += sdca_fdl.o
sound/soc/sdca/sdca_function_device.c new file +117 -0

117 lines not on this page · raw message

sound/soc/sdca/sdca_function_device.h new file +15 -0
new file mode 100644
index 0000000000000..5adf7551d3a44
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) */
+/* Copyright(c) 2024 Intel Corporation. */
+
+#ifndef __SDCA_FUNCTION_DEVICE_H
+#define __SDCA_FUNCTION_DEVICE_H
+
+struct sdca_dev {
+	struct auxiliary_device auxdev;
+	struct sdca_function_data function;
+};
+
+#define auxiliary_dev_to_sdca_dev(auxiliary_dev)		\
+	container_of(auxiliary_dev, struct sdca_dev, auxdev)
+
+#endif
Signature · 1 line
2.47.3
author maintainer
#12 lore raw

PATCH v3 12/13 ASoC: SDCA: Add basic SDCA class driver

In reply to Charles Keepax

Add a device level driver as the entry point for the class driver. Additional auxiliary drivers will be registered to support each function within the device. This driver will register those function drivers and provide the device level functionality, such as monitoring bus attach/detach, the device level register map, and the root for the IRQ handling.

---

No changes since v2.

 include/linux/soundwire/sdw_registers.h |   2 +
 sound/soc/sdca/Kconfig                  |  10 +
 sound/soc/sdca/Makefile                 |   4 +
 sound/soc/sdca/sdca_class.c             | 304 ++++++++++++++++++++++++
 sound/soc/sdca/sdca_class.h             |  37 +++
 5 files changed, 357 insertions(+)
 create mode 100644 sound/soc/sdca/sdca_class.c
 create mode 100644 sound/soc/sdca/sdca_class.h
include/linux/soundwire/sdw_registers.h +2 -0
index 0a5939285583b..cae8a0a5a9b04 100644
@@ -355,4 +355,6 @@
 /* Check the reserved and fixed bits in address */
 #define SDW_SDCA_VALID_CTL(reg) (((reg) & (GENMASK(31, 25) | BIT(18) | BIT(13))) == BIT(30))
 
+#define SDW_SDCA_MAX_REGISTER			0x47FFFFFF
+
 #endif /* __SDW_REGISTERS_H */
sound/soc/sdca/Kconfig +10 -0
index e7f36d668f159..56e3ff8448762 100644
@@ -37,4 +37,14 @@ config SND_SOC_SDCA_FDL
 config SND_SOC_SDCA_OPTIONAL
 	def_tristate SND_SOC_SDCA || !SND_SOC_SDCA
 
+config SND_SOC_SDCA_CLASS
+	tristate "SDCA Class Driver"
+	select SND_SOC_SDCA
+	select SND_SOC_SDCA_FDL
+	select SND_SOC_SDCA_HID
+	select SND_SOC_SDCA_IRQ
+	help
+	  This option enables support for the SDCA Class driver which should
+	  support any class compliant SDCA part.
+
 endmenu
sound/soc/sdca/Makefile +4 -0
index babe3fa2bb3ff..95db4cef34833 100644
@@ -6,4 +6,8 @@ snd-soc-sdca-$(CONFIG_SND_SOC_SDCA_HID) += sdca_hid.o
 snd-soc-sdca-$(CONFIG_SND_SOC_SDCA_IRQ) += sdca_interrupts.o
 snd-soc-sdca-$(CONFIG_SND_SOC_SDCA_FDL) += sdca_fdl.o
 
+snd-soc-sdca-class-y := sdca_class.o
+
 obj-$(CONFIG_SND_SOC_SDCA) += snd-soc-sdca.o
+
+obj-$(CONFIG_SND_SOC_SDCA_CLASS) += snd-soc-sdca-class.o
sound/soc/sdca/sdca_class.c new file +304 -0

304 lines not on this page · raw message

sound/soc/sdca/sdca_class.h new file +37 -0
new file mode 100644
index 0000000000000..bb4c9dd124296
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * The MIPI SDCA specification is available for public downloads at
+ * https://www.mipi.org/mipi-sdca-v1-0-download
+ *
+ * Copyright (C) 2025 Cirrus Logic, Inc. and
+ *                    Cirrus Logic International Semiconductor Ltd.
+ */
+
+#ifndef __SDCA_CLASS_H__
+#define __SDCA_CLASS_H__
+
+#include <linux/completion.h>
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+
+struct device;
+struct regmap;
+struct sdw_slave;
+struct sdca_function_data;
+
+struct sdca_class_drv {
+	struct device *dev;
+	struct regmap *dev_regmap;
+	struct sdw_slave *sdw;
+
+	struct sdca_function_data *functions;
+	struct sdca_interrupt_info *irq_info;
+
+	struct mutex regmap_lock;
+	struct work_struct boot_work;
+	struct completion device_attach;
+
+	bool attached;
+};
+
+#endif /* __SDCA_CLASS_H__ */
Signature · 1 line
2.47.3
author maintainer
#13 lore raw

PATCH v3 13/13 ASoC: SDCA: Add basic SDCA function driver

In reply to Charles Keepax

Add a driver to support the individual SDCA functions within the class driver. Use the SDCA helpers to parse the DisCo information and register a function driver based on those properties. Manage the boot of the function, reset, FDL, defaults. Manage the function level register map.

---

Changes since v2:
- Renamed suspend/resume functions to be a little less wordy.

 sound/soc/sdca/Kconfig               |   7 +
 sound/soc/sdca/Makefile              |   2 +
 sound/soc/sdca/sdca_class_function.c | 460 +++++++++++++++++++++++++++
 3 files changed, 469 insertions(+)
 create mode 100644 sound/soc/sdca/sdca_class_function.c
sound/soc/sdca/Kconfig +7 -0
index 56e3ff8448762..0a37e94a60302 100644
@@ -39,6 +39,7 @@ config SND_SOC_SDCA_OPTIONAL
 
 config SND_SOC_SDCA_CLASS
 	tristate "SDCA Class Driver"
+	select SND_SOC_SDCA_CLASS_FUNCTION
 	select SND_SOC_SDCA
 	select SND_SOC_SDCA_FDL
 	select SND_SOC_SDCA_HID
@@ -47,4 +48,10 @@ config SND_SOC_SDCA_CLASS
 	  This option enables support for the SDCA Class driver which should
 	  support any class compliant SDCA part.
 
+config SND_SOC_SDCA_CLASS_FUNCTION
+	tristate
+	help
+	  This option enables support for the SDCA Class Function drivers,
+	  these implement the individual functions of the SDCA Class driver.
+
 endmenu
sound/soc/sdca/Makefile +2 -0
index 95db4cef34833..f6b73275d9649 100644
@@ -7,7 +7,9 @@ snd-soc-sdca-$(CONFIG_SND_SOC_SDCA_IRQ) += sdca_interrupts.o
 snd-soc-sdca-$(CONFIG_SND_SOC_SDCA_FDL) += sdca_fdl.o
 
 snd-soc-sdca-class-y := sdca_class.o
+snd-soc-sdca-class-function-y := sdca_class_function.o
 
 obj-$(CONFIG_SND_SOC_SDCA) += snd-soc-sdca.o
 
 obj-$(CONFIG_SND_SOC_SDCA_CLASS) += snd-soc-sdca-class.o
+obj-$(CONFIG_SND_SOC_SDCA_CLASS_FUNCTION) += snd-soc-sdca-class-function.o
sound/soc/sdca/sdca_class_function.c new file +460 -0

460 lines not on this page · raw message

Signature · 1 line
2.47.3
maintainer
#14 lore raw
In reply to Charles Keepax
Quoted 54 lines · Charles Keepax

This series adds an initial SDCA class driver, this consists of a primary driver attached to the SoundWire device, and auxiliary drivers representing each of the functions of the SDCA device. These drivers all use the APIs added over the past series's to provide the class functionality, as such these final drivers themselves are quite thin.

Also a few fix ups at the start of the series that have gathered up whilst the last SDCA series was in review.

Thanks,
Charles

Changes since v2:
- Updated the locking in sdca_fdl_process
- Correct some spelling in comments
- Renamed suspend/resume functions to be a little short

Changes since v1:
- Add a bunch of bug fix patches
- Change some prints to dbgs
- Add some additional comments
- Flip order on regcache operations in resume

Charles Keepax (12):
ASoC: SDCA: Remove duplicated module macros
ASoC: SDCA: Fix missing dash in HIDE DisCo property
ASoC: SDCA: Add missing forward declaration in header
ASoC: SDCA: Correct FDL locking in sdca_fdl_process()
ASoC: SDCA: Add comment for function reset polling
ASoC: SDCA: Move most of the messages from info to debug
ASoC: SDCA: Use helper macros for control identification
ASoC: SDCA: Factor out helper to process Control defaults
ASoC: SDCA: Populate regmap cache for readable Controls
ASoC: SDCA: Add helper to write initialization writes
ASoC: SDCA: Add basic SDCA class driver
ASoC: SDCA: Add basic SDCA function driver

Pierre-Louis Bossart (1):
ASoC: SDCA: add function devices

 include/linux/soundwire/sdw_registers.h |   2 +
 include/sound/sdca.h                    |  14 +
 include/sound/sdca_regmap.h             |   2 +
 sound/soc/sdca/Kconfig                  |  18 +
 sound/soc/sdca/Makefile                 |  10 +-
 sound/soc/sdca/sdca_class.c             | 304 ++++++++++++++++
 sound/soc/sdca/sdca_class.h             |  37 ++
 sound/soc/sdca/sdca_class_function.c    | 460 ++++++++++++++++++++++++
 sound/soc/sdca/sdca_fdl.c               |   8 +-
 sound/soc/sdca/sdca_function_device.c   | 117 ++++++
 sound/soc/sdca/sdca_function_device.h   |  15 +
 sound/soc/sdca/sdca_functions.c         |  52 ++-
 sound/soc/sdca/sdca_hid.c               |   3 -
Quoted 9 lines
 sound/soc/sdca/sdca_interrupts.c        |  39 +-
 sound/soc/sdca/sdca_regmap.c            |  89 +++--
 15 files changed, 1089 insertions(+), 81 deletions(-)
 create mode 100644 sound/soc/sdca/sdca_class.c
 create mode 100644 sound/soc/sdca/sdca_class.h
 create mode 100644 sound/soc/sdca/sdca_class_function.c
 create mode 100644 sound/soc/sdca/sdca_function_device.c
 create mode 100644 sound/soc/sdca/sdca_function_device.h

For this series: Tested-by: Bard Liao <[email protected]>

maintainer Reviewed-by on the v3 series
#15 lore raw
In reply to Charles Keepax

W dniu czw, 06.11.2025 o godzinie 11∶44 +0000, użytkownik Charles

Quoted 59 lines · Keepax

This series adds an initial SDCA class driver, this consists of a primary driver attached to the SoundWire device, and auxiliary drivers
representing each of the functions of the SDCA device. These drivers all
use the APIs added over the past series's to provide the class functionality, as such these final drivers themselves are quite thin.

Also a few fix ups at the start of the series that have gathered up whilst the last SDCA series was in review.

Thanks,
Charles

Changes since v2:
 - Updated the locking in sdca_fdl_process
 - Correct some spelling in comments
 - Renamed suspend/resume functions to be a little short

Changes since v1:
 - Add a bunch of bug fix patches
 - Change some prints to dbgs
 - Add some additional comments
 - Flip order on regcache operations in resume

Charles Keepax (12):
  ASoC: SDCA: Remove duplicated module macros
  ASoC: SDCA: Fix missing dash in HIDE DisCo property
  ASoC: SDCA: Add missing forward declaration in header
  ASoC: SDCA: Correct FDL locking in sdca_fdl_process()
  ASoC: SDCA: Add comment for function reset polling
  ASoC: SDCA: Move most of the messages from info to debug
  ASoC: SDCA: Use helper macros for control identification
  ASoC: SDCA: Factor out helper to process Control defaults
  ASoC: SDCA: Populate regmap cache for readable Controls
  ASoC: SDCA: Add helper to write initialization writes
  ASoC: SDCA: Add basic SDCA class driver
  ASoC: SDCA: Add basic SDCA function driver

Pierre-Louis Bossart (1):
  ASoC: SDCA: add function devices

 include/linux/soundwire/sdw_registers.h |   2 + include/sound/sdca.h                    |  14 + include/sound/sdca_regmap.h             |   2 + sound/soc/sdca/Kconfig                  |  18 + sound/soc/sdca/Makefile                 |  10 +- sound/soc/sdca/sdca_class.c             | 304 ++++++++++++++++ sound/soc/sdca/sdca_class.h             |  37 ++ sound/soc/sdca/sdca_class_function.c    | 460
++++++++++++++++++++++++
 sound/soc/sdca/sdca_fdl.c               |   8 +- sound/soc/sdca/sdca_function_device.c   | 117 ++++++ sound/soc/sdca/sdca_function_device.h   |  15 + sound/soc/sdca/sdca_functions.c         |  52 ++- sound/soc/sdca/sdca_hid.c               |   3 - sound/soc/sdca/sdca_interrupts.c        |  39 +- sound/soc/sdca/sdca_regmap.c            |  89 +++--

Quoted 6 lines
 15 files changed, 1089 insertions(+), 81 deletions(-)

 create mode 100644 sound/soc/sdca/sdca_class.c create mode 100644 sound/soc/sdca/sdca_class.h create mode 100644 sound/soc/sdca/sdca_class_function.c create mode 100644 sound/soc/sdca/sdca_function_device.c create mode 100644 sound/soc/sdca/sdca_function_device.h

For the series:

Signature · 2 lines
Regards,
Maciej
Reviewed-by on the v3 series
#16 lore raw
In reply to Charles Keepax
Quoted 17 lines · Charles Keepax

This series adds an initial SDCA class driver, this consists of a primary driver attached to the SoundWire device, and auxiliary drivers representing each of the functions of the SDCA device. These drivers all use the APIs added over the past series's to provide the class functionality, as such these final drivers themselves are quite thin.

Also a few fix ups at the start of the series that have gathered up whilst the last SDCA series was in review.

Thanks,
Charles

Changes since v2:
- Updated the locking in sdca_fdl_process
- Correct some spelling in comments
- Renamed suspend/resume functions to be a little short

Quoted 5 lines

Changes since v1:
- Add a bunch of bug fix patches
- Change some prints to dbgs
- Add some additional comments
- Flip order on regcache operations in resume

Quoted 40 lines

Charles Keepax (12):
ASoC: SDCA: Remove duplicated module macros
ASoC: SDCA: Fix missing dash in HIDE DisCo property
ASoC: SDCA: Add missing forward declaration in header
ASoC: SDCA: Correct FDL locking in sdca_fdl_process()
ASoC: SDCA: Add comment for function reset polling
ASoC: SDCA: Move most of the messages from info to debug
ASoC: SDCA: Use helper macros for control identification
ASoC: SDCA: Factor out helper to process Control defaults
ASoC: SDCA: Populate regmap cache for readable Controls
ASoC: SDCA: Add helper to write initialization writes
ASoC: SDCA: Add basic SDCA class driver
ASoC: SDCA: Add basic SDCA function driver

Pierre-Louis Bossart (1):
ASoC: SDCA: add function devices

 include/linux/soundwire/sdw_registers.h |   2 +
 include/sound/sdca.h                    |  14 +
 include/sound/sdca_regmap.h             |   2 +
 sound/soc/sdca/Kconfig                  |  18 +
 sound/soc/sdca/Makefile                 |  10 +-
 sound/soc/sdca/sdca_class.c             | 304 ++++++++++++++++
 sound/soc/sdca/sdca_class.h             |  37 ++
 sound/soc/sdca/sdca_class_function.c    | 460 ++++++++++++++++++++++++
 sound/soc/sdca/sdca_fdl.c               |   8 +-
 sound/soc/sdca/sdca_function_device.c   | 117 ++++++
 sound/soc/sdca/sdca_function_device.h   |  15 +
 sound/soc/sdca/sdca_functions.c         |  52 ++-
 sound/soc/sdca/sdca_hid.c               |   3 -
 sound/soc/sdca/sdca_interrupts.c        |  39 +-
 sound/soc/sdca/sdca_regmap.c            |  89 +++--
 15 files changed, 1089 insertions(+), 81 deletions(-)
 create mode 100644 sound/soc/sdca/sdca_class.c
 create mode 100644 sound/soc/sdca/sdca_class.h
 create mode 100644 sound/soc/sdca/sdca_class_function.c
 create mode 100644 sound/soc/sdca/sdca_function_device.c
 create mode 100644 sound/soc/sdca/sdca_function_device.h
Signature · 1 line
Péter
Tested-by on the v3 series
#17 lore raw
In reply to Charles Keepax
Quoted 11 lines · Charles Keepax

This series adds an initial SDCA class driver, this consists of a primary driver attached to the SoundWire device, and auxiliary drivers representing each of the functions of the SDCA device. These drivers all use the APIs added over the past series's to provide the class functionality, as such these final drivers themselves are quite thin.

Also a few fix ups at the start of the series that have gathered up whilst the last SDCA series was in review.

Thanks,
Charles

maintainer
#18 lore raw
In reply to Charles Keepax
Quoted 10 lines · Charles Keepax

This series adds an initial SDCA class driver, this consists of a primary driver attached to the SoundWire device, and auxiliary drivers representing each of the functions of the SDCA device. These drivers all use the APIs added over the past series's to provide the class functionality, as such these final drivers themselves are quite thin.

Also a few fix ups at the start of the series that have gathered up whilst the last SDCA series was in review.

[...]

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[01/13] ASoC: SDCA: Remove duplicated module macros

        commit: 549f618516a17f7d492cf64048713f77e057cd37
[02/13] ASoC: SDCA: Fix missing dash in HIDE DisCo property
        commit: 3508311f2e1c872b645f13c6fd52840418089d41
[03/13] ASoC: SDCA: Add missing forward declaration in header
        commit: 5fe65824b74c0414f105f0535437108cd6c31cc7
[04/13] ASoC: SDCA: Correct FDL locking in sdca_fdl_process()
        commit: cc58055bfefa065b68a8ab92a0196c9b24f46f02
[05/13] ASoC: SDCA: Add comment for function reset polling
        commit: 336beae295bf6973e5c8c222dfec6b8faf3c55f6
[06/13] ASoC: SDCA: Move most of the messages from info to debug
        commit: edb82534ee655091e198edf95e223115dc27c284
[07/13] ASoC: SDCA: Use helper macros for control identification
        commit: fb62da31fad29fe3c9844ba217b9bc99820d4622
[08/13] ASoC: SDCA: Factor out helper to process Control defaults
        commit: 222cbe172e5f7de130cc9c3c85f8f33d51c131bc
[09/13] ASoC: SDCA: Populate regmap cache for readable Controls
        commit: 193c65ec8ed4d946b3f80b7d08e4320ded7ac4fa
[10/13] ASoC: SDCA: Add helper to write initialization writes
        commit: 5acf17b6df5e759bfb8bc0a75fadcbb3e363a17b
[11/13] ASoC: SDCA: add function devices
        commit: 4496d1c65bad7a3a32d2e09aaf3c54bc562c3fcc
[12/13] ASoC: SDCA: Add basic SDCA class driver
        commit: 2d877d0659cb69cc0677ee2805e9521966d70ac5
[13/13] ASoC: SDCA: Add basic SDCA function driver
        commit: 3af1815a2f9caebfc666af3912e24d030a5368d5

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark