Skip to contentSkip to conversation

most: core: fix resource leak in most_register_interface error paths

PATCH In review Navaneeth K 2 participants 2 messages Nov 27, 2025

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v4 1/1 most: core: fix resource leak in most_register_interface error paths

The function most_register_interface() did not correctly release resources if it failed early (before registering the device). In these cases, it returned an error code immediately, leaking the memory allocated for the interface.

Fix this by initializing the device early via device_initialize() and calling put_device() on all error paths.

The most_register_interface() is expected to call put_device() on error which frees the resources allocated in the caller. The put_device() either calls release_mdev() or dim2_release(), depending on the caller.

Switch to using device_add() instead of device_register() to handle the split initialization.

---
Changes in v4:
- Removed the '!iface->dev' NULL check as suggested by Dan Carpenter.
- Updated commit message to explicitly explain how put_device() triggers the caller's release function (suggested by Dan Carpenter).

Changes in v3:
- Dropped USB cleanup patch (already applied upstream).
- Added Acked-by.

 drivers/most/core.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/most/core.c +5 -1
index da319d108ea1d..6277e6702ca8c 100644
@@ -1286,15 +1286,19 @@ int most_register_interface(struct most_interface *iface)
 	    !iface->poison_channel || (iface->num_channels > MAX_CHANNELS))
 		return -EINVAL;
 
+	device_initialize(iface->dev);
+
 	id = ida_alloc(&mdev_id, GFP_KERNEL);
 	if (id < 0) {
 		dev_err(iface->dev, "Failed to allocate device ID\n");
+		put_device(iface->dev);
 		return id;
 	}
 
 	iface->p = kzalloc(sizeof(*iface->p), GFP_KERNEL);
 	if (!iface->p) {
 		ida_free(&mdev_id, id);
+		put_device(iface->dev);
 		return -ENOMEM;
 	}
 
@@ -1304,7 +1308,7 @@ int most_register_interface(struct most_interface *iface)
 	iface->dev->bus = &mostbus;
 	iface->dev->groups = interface_attr_groups;
 	dev_set_drvdata(iface->dev, iface);
-	if (device_register(iface->dev)) {
+	if (device_add(iface->dev)) {
 		dev_err(iface->dev, "Failed to register interface device\n");
 		kfree(iface->p);
 		put_device(iface->dev);
Signature · 1 line
2.43.0
Reviewed-by on v4 1/1
#1 lore raw
Quoted 13 lines · Navaneeth K

The function most_register_interface() did not correctly release resources if it failed early (before registering the device). In these cases, it returned an error code immediately, leaking the memory allocated for the interface.

Fix this by initializing the device early via device_initialize() and calling put_device() on all error paths.

The most_register_interface() is expected to call put_device() on error which frees the resources allocated in the caller. The put_device() either calls release_mdev() or dim2_release(), depending on the caller.

Quoted 6 lines

Switch to using device_add() instead of device_register() to handle the split initialization.

---

Thanks!

regards,
dan carpenter