Skip to contentSkip to conversation

staging: most: dim2: clean up error handling in fsl_mx6_enable

PATCH New Artem Lytkin 1 participant 4 messages Feb 24

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v3 cover staging: most: dim2: clean up error handling in fsl_mx6_enable

This series cleans up error handling in fsl_mx6_enable(), split into separate logical changes per Dan Carpenter's review of v1.

Patch 1 replaces IS_ERR_OR_NULL() with IS_ERR() since devm_clk_get() never returns NULL.

Patch 2 replaces dev_err() + hardcoded -EFAULT with dev_err_probe() and PTR_ERR() to propagate correct error codes and handle probe deferral properly.

Patch 3 removes unnecessary string indirection in dev_err() calls ("%s\n", "message" -> "message\n").

Changes since v2:
- No code changes, resending as new thread to resolve duplicate v2 submissions (sorry for the noise)

Changes since v1:
- Split combined patch into 3 separate patches (one change per patch)
- Extended string indirection fix to all three enable functions

Artem Lytkin (3):
staging: most: dim2: replace IS_ERR_OR_NULL with IS_ERR for
devm_clk_get
staging: most: dim2: use dev_err_probe and proper error codes for
clock
staging: most: dim2: remove unnecessary string indirection in dev_err

 drivers/staging/most/dim2/dim2.c | 19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)
Signature · 1 line
2.43.0
#1 lore raw

PATCH v3 1/3 staging: most: dim2: replace IS_ERR_OR_NULL with IS_ERR for devm_clk_get

devm_clk_get() never returns NULL, so IS_ERR_OR_NULL() checks are unnecessary. Replace them with IS_ERR() for both the "mlb" and "pll8_mlb" clock lookups in fsl_mx6_enable().

---
 drivers/staging/most/dim2/dim2.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/staging/most/dim2/dim2.c +2 -2
index 92c7a7d8fe7e..cea1ba99caf7 100644
@@ -921,7 +921,7 @@ static int fsl_mx6_enable(struct platform_device *pdev)
 	int ret;
 
 	dev->clk = devm_clk_get(&pdev->dev, "mlb");
-	if (IS_ERR_OR_NULL(dev->clk)) {
+	if (IS_ERR(dev->clk)) {
 		dev_err(&pdev->dev, "unable to get mlb clock\n");
 		return -EFAULT;
 	}
@@ -935,7 +935,7 @@ static int fsl_mx6_enable(struct platform_device *pdev)
 	if (dev->clk_speed >= CLK_2048FS) {
 		/* enable pll */
 		dev->clk_pll = devm_clk_get(&pdev->dev, "pll8_mlb");
-		if (IS_ERR_OR_NULL(dev->clk_pll)) {
+		if (IS_ERR(dev->clk_pll)) {
 			dev_err(&pdev->dev, "unable to get mlb pll clock\n");
 			clk_disable_unprepare(dev->clk);
 			return -EFAULT;
Signature · 1 line
2.43.0
#2 lore raw

PATCH v3 2/3 staging: most: dim2: use dev_err_probe and proper error codes for clock

In reply to Artem Lytkin

Replace hardcoded -EFAULT returns with dev_err_probe() and PTR_ERR() when devm_clk_get() fails in fsl_mx6_enable(). This ensures the correct error code is propagated (e.g. -EPROBE_DEFER for deferred probing) and avoids log noise during probe deferral.

---
 drivers/staging/most/dim2/dim2.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)
drivers/staging/most/dim2/dim2.c +5 -6
index cea1ba99caf7..e4c8b4995c61 100644
@@ -921,10 +921,9 @@ static int fsl_mx6_enable(struct platform_device *pdev)
 	int ret;
 
 	dev->clk = devm_clk_get(&pdev->dev, "mlb");
-	if (IS_ERR(dev->clk)) {
-		dev_err(&pdev->dev, "unable to get mlb clock\n");
-		return -EFAULT;
-	}
+	if (IS_ERR(dev->clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(dev->clk),
+				     "unable to get mlb clock\n");
 
 	ret = clk_prepare_enable(dev->clk);
 	if (ret) {
@@ -936,9 +935,9 @@ static int fsl_mx6_enable(struct platform_device *pdev)
 		/* enable pll */
 		dev->clk_pll = devm_clk_get(&pdev->dev, "pll8_mlb");
 		if (IS_ERR(dev->clk_pll)) {
-			dev_err(&pdev->dev, "unable to get mlb pll clock\n");
 			clk_disable_unprepare(dev->clk);
-			return -EFAULT;
+			return dev_err_probe(&pdev->dev, PTR_ERR(dev->clk_pll),
+					     "unable to get mlb pll clock\n");
 		}
 
 		writel(0x888, dev->io_base + 0x38);
Signature · 1 line
2.43.0
#3 lore raw

PATCH v3 3/3 staging: most: dim2: remove unnecessary string indirection in dev_err

In reply to Artem Lytkin

Replace dev_err(&pdev->dev, "%s\n", "clk_prepare_enable failed") with the direct format string dev_err(&pdev->dev, "clk_prepare_enable failed\n"). The extra level of indirection through %s is unnecessary.

---
 drivers/staging/most/dim2/dim2.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/staging/most/dim2/dim2.c +3 -3
index e4c8b4995c61..66617e89e028 100644
@@ -927,7 +927,7 @@ static int fsl_mx6_enable(struct platform_device *pdev)
 
 	ret = clk_prepare_enable(dev->clk);
 	if (ret) {
-		dev_err(&pdev->dev, "%s\n", "clk_prepare_enable failed");
+		dev_err(&pdev->dev, "clk_prepare_enable failed\n");
 		return ret;
 	}
 
@@ -975,7 +975,7 @@ static int rcar_gen2_enable(struct platform_device *pdev)
 
 	ret = clk_prepare_enable(dev->clk);
 	if (ret) {
-		dev_err(&pdev->dev, "%s\n", "clk_prepare_enable failed");
+		dev_err(&pdev->dev, "clk_prepare_enable failed\n");
 		return ret;
 	}
 
@@ -1020,7 +1020,7 @@ static int rcar_gen3_enable(struct platform_device *pdev)
 
 	ret = clk_prepare_enable(dev->clk);
 	if (ret) {
-		dev_err(&pdev->dev, "%s\n", "clk_prepare_enable failed");
+		dev_err(&pdev->dev, "clk_prepare_enable failed\n");
 		return ret;
 	}
 
Signature · 1 line
2.43.0