iio: st_sensors: drop temporary kmalloc buffer and reuse buffer_data
PATCH v2 1/1 iio: st_sensors: drop temporary kmalloc buffer and reuse buffer_data
From: Sanjay Chitroda <[email protected]>
Replace the per-call kmalloc() scratch buffer with the statically allocated buffer_data[] field present in struct st_sensor_data. The existing buffer is DMA-aligned and sufficiently sized for all channel widths, so using it avoids unnecessary dynamic memory allocation on each read.
This simplifies the code, removes redundent code and allocation. No functional change intended.
---
Changes in v2:
- split series to individual patch
- address review comment from David Lechner and reuse exising buffer instead of allocation
- Link to v1 https://lore.kernel.org/all/[email protected]/
--- drivers/iio/common/st_sensors/st_sensors_core.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-)
drivers/iio/common/st_sensors/st_sensors_core.c +3 -9
@@ -495,20 +495,17 @@ static int st_sensors_read_axis_data(struct iio_dev *indio_dev, struct iio_chan_spec const *ch, int *data) { int err; -u8 *outdata;struct st_sensor_data *sdata =iio_priv (indio_dev);unsigned int byte_for_channel; byte_for_channel =DIV_ROUND_UP (ch->scan_type.realbits + ch->scan_type.shift,8 ); - outdata =kmalloc (byte_for_channel,GFP_DMA |GFP_KERNEL ); -if (!outdata) -return -ENOMEM ; +u8 *outdata = (u8 *)sdata->buffer_data; err =regmap_bulk_read (sdata->regmap, ch->address, outdata, byte_for_channel);if (err <0 ) - goto st_sensors_free_memory; +return err;if (byte_for_channel ==1 ) *data = (s8)*outdata;
@@ -517,10 +514,7 @@ static int st_sensors_read_axis_data(struct iio_dev *indio_dev,else if (byte_for_channel ==3 ) *data = (s32 )sign_extend32 (get_unaligned_le24 (outdata),23 ); -st_sensors_free_memory: -kfree (outdata); - -return err; +return 0 ; } int st_sensors_read_info_raw(struct iio_dev *indio_dev,
Signature · 1 line
2.34.1
Quoted 9 lines · Sanjay Chitroda
From: Sanjay Chitroda <[email protected]>
Replace the per-call
kmalloc()scratch buffer with the statically allocated buffer_data[] field present in structst_sensor_data. The existing buffer is DMA-aligned and sufficiently sized for all channel widths, so using it avoids unnecessary dynamic memory allocation on each read.This simplifies the code, removes redundent code and allocation.
Spell check your commit messages.
Quoted 1 line
No functional change intended.
...
drivers/iio/common/st_sensors/st_sensors_core.c static int st_sensors_read_axis_data(struct iio_dev *indio_dev,
Quoted 9 lines
int err;drivers/iio/common/st_sensors/st_sensors_core.c +1
-1-u8 *outdata;struct st_sensor_data *sdata =iio_priv (indio_dev);unsigned int byte_for_channel; byte_for_channel =DIV_ROUND_UP (ch->scan_type.realbits + ch->scan_type.shift,8 ); +u8 *outdata = (u8 *)sdata->buffer_data;
No. We don't mess up with C99 definitions. The only exceptions are loop iterators and scoped variables which are none in this case.
Signature · 2 lines
With Best Regards, Andy Shevchenko
Jonathan Cameron
maintainerQuoted 28 lines · On Wed, 11 Mar 2026 23:50:50 +0530 Sanjay Chitroda…
From: Sanjay Chitroda <[email protected]>
Replace the per-call
kmalloc()scratch buffer with the statically allocated buffer_data[] field present in structst_sensor_data. The existing buffer is DMA-aligned and sufficiently sized for all channel widths, so using it avoids unnecessary dynamic memory allocation on each read.This simplifies the code, removes redundent code and allocation. No functional change intended.
Signed-off-by Sanjay Chitroda <[email protected]>---
Changes in v2:
- split series to individual patch
- address review comment from David Lechner and reuse exising buffer instead of allocation
- Link to v1 https://lore.kernel.org/all/[email protected]/--- drivers/iio/common/st_sensors/st_sensors_core.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-)drivers/iio/common/st_sensors/st_sensors_core.c +0
-0@@ -495,20 +495,17 @@ static int st_sensors_read_axis_data(struct iio_dev *indio_dev, struct iio_chan_spec const *ch, int *data) { int err;
drivers/iio/common/st_sensors/st_sensors_core.c static int st_sensors_read_axis_data(struct iio_dev *indio_dev, · line 503
Quoted 10 lines
drivers/iio/common/st_sensors/st_sensors_core.c +1
-4-u8 *outdata;struct st_sensor_data *sdata =iio_priv (indio_dev);unsigned int byte_for_channel; byte_for_channel =DIV_ROUND_UP (ch->scan_type.realbits + ch->scan_type.shift,8 ); - outdata =kmalloc (byte_for_channel,GFP_DMA |GFP_KERNEL ); -if (!outdata) -return -ENOMEM ; +u8 *outdata = (u8 *)sdata->buffer_data;
Why is buffer_data a char array? It's already implicitly cast to a u8 in one place. I'd see if it actually wants to be a char anywhere in the driver. If not fix that as a precursor patch to this one.
I'm not sure I'd bother having a local variable for outdata given it is only used a few times but I don't mind it much (beyond what Andy pointed out about declaring it here).
Jonathan
Quoted 21 lines
drivers/iio/common/st_sensors/st_sensors_core.c +2
-5err =regmap_bulk_read (sdata->regmap, ch->address, outdata, byte_for_channel);if (err <0 ) - goto st_sensors_free_memory; +return err;if (byte_for_channel ==1 ) *data = (s8)*outdata;@@ -517,10 +514,7 @@ static int st_sensors_read_axis_data(struct iio_dev *indio_dev,else if (byte_for_channel ==3 ) *data = (s32 )sign_extend32 (get_unaligned_le24 (outdata),23 ); -st_sensors_free_memory: -kfree (outdata); - -return err; +return 0 ; } int st_sensors_read_info_raw(struct iio_dev *indio_dev,