dt-bindings: arm: mediatek: mediatek,g3dsys: Convert to DT schema
PATCH v2 1/1 dt-bindings: arm: mediatek: mediatek,g3dsys: Convert to DT schema
Convert the MediaTek G3D system controller devicetree binding from the legacy text format to DT schema.
Signed-off-by Udaya Kiran Challa <[email protected]>
---
Changelog:
Changes since v1:
- Drop redundant description for reg
- Drop redundant description for provider properties
Link to v1:https://lore.kernel.org/all/[email protected]/
--- .../bindings/arm/mediatek/mediatek,g3dsys.txt | 30 ---------- .../arm/mediatek/mediatek,g3dsys.yaml | 58 +++++++++++++++++++ 2 files changed, 58 insertions(+), 30 deletions(-) delete mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,g3dsys.txt create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,g3dsys.yaml
Documentation/devicetree/bindings/arm/mediatek/mediatek,g3dsys.txt deleted +0 -30
@@ -1,30 +0,0 @@ -MediaTek g3dsys controller -============================ - -The MediaTek g3dsys controller provides various clocks and reset controller to -the GPU. - -Required Properties: - -- compatible: Should be: - - "mediatek,mt2701-g3dsys", "syscon": - for MT2701 SoC - - "mediatek,mt7623-g3dsys", "mediatek,mt2701-g3dsys", "syscon": - for MT7623 SoC -- #clock-cells: Must be 1 -- #reset-cells: Must be 1 - -The g3dsys controller uses the common clk binding from -Documentation/devicetree/bindings/clock/clock-bindings.txt -The available clocks are defined in dt-bindings/clock/mt*-clk.h. - -Example: - -g3dsys: clock-controller@13000000 { - compatible = "mediatek,mt7623-g3dsys", - "mediatek,mt2701-g3dsys", - "syscon"; - reg = <0 0x13000000 0 0x200>; - #clock-cells = <1>; - #reset-cells = <1>; -};
Documentation/devicetree/bindings/arm/mediatek/mediatek,g3dsys.yaml new file +58 -0
58 lines not on this page · raw message
Signature · 1 line
2.34.1
Documentation/devicetree/bindings/arm/mediatek/mediatek,g3dsys.yaml
Quoted 5 lines · Udaya Kiran Challa
Documentation/devicetree/bindings/arm/mediatek/mediatek,g3dsys.yaml new file +0
-0
Apologies for not noticing it earlier, but still two things:
1. Place it in Documentation/devicetree/bindings/soc/mediatek/
2. Filename based on fallback, so mediatek,mt2701-g3dsys.yaml
Best regards,
Krzysztof