iio: light: Add driver for PixArt PAJ7620
A message that is not in the archive (sent off-list or not yet received): [email protected]
PATCH 1/1 iio: light: Add driver for PixArt PAJ7620
---
This is part 2 of a 2-patch series proposing a driver for the PixArt PAJ7620 gesture sensor. This patch adds the actual C driver, Kconfig hooks, and Makefile integrations. The device tree bindings were submitted in the preceding patch.
drivers/iio/light/Kconfig | 7 + drivers/iio/light/Makefile | 1 + drivers/iio/light/paj7620.c | 433 ++++++++++++++++++++++++++++++++++++ 3 files changed, 441 insertions(+) create mode 100644 drivers/iio/light/paj7620.c
drivers/iio/light/Kconfig +7 -0
@@ -520,6 +520,13 @@ config PA12203001 This driver can also be built as a module. If so, the module will be called pa12203001. +config PAJ7620 + tristate "PixArt PAJ7620 Gesture Sensor" + depends on I2C + select REGMAP_I2C + help + Say Y here to build support for the PixArt PAJ7620 gesture sensor. + config SI1133 tristate "SI1133 UV Index Sensor and Ambient Light Sensor" depends on I2C
drivers/iio/light/Makefile +1 -0
@@ -46,6 +46,7 @@ obj-$(CONFIG_OPT3001) += opt3001.o obj-$(CONFIG_OPT4001) += opt4001.o obj-$(CONFIG_OPT4060) += opt4060.o obj-$(CONFIG_PA12203001) += pa12203001.o +obj-$(CONFIG_PAJ7620) += paj7620.o obj-$(CONFIG_ROHM_BU27034) += rohm-bu27034.o obj-$(CONFIG_RPR0521) += rpr0521.o obj-$(CONFIG_SI1133) += si1133.o
drivers/iio/light/paj7620.c new file +433 -0
433 lines not on this page · raw message
Signature · 1 line
2.43.0
David Lechner
reviewerQuoted 6 lines · Harpreet Saini
Signed-off-by Harpreet Saini <[email protected]>---
This is part 2 of a 2-patch series proposing a driver for the PixArt PAJ7620 gesture sensor. This patch adds the actual C driver,Kconfighooks, andMakefileintegrations. The device tree bindings were submitted in the preceding patch.
Patches should be combined into a series with a cover letter.
The cover letter should explain clearly why this should be considered for the IIO subsystem instead of the input subsystem. It doesn't seem like there is a valid justification though.
Quoted 6 lines
drivers/iio/light/Kconfig | 7 + drivers/iio/light/Makefile | 1 + drivers/iio/light/paj7620.c | 433 ++++++++++++++++++++++++++++++++++++ 3 files changed, 441 insertions(+) create mode 100644 drivers/iio/light/paj7620.c
There is no IIO_LIGHT channel, so this does not look at all like a light sensor.