ASoC: SDCA: Add PDE verification reusable helper
Subsystems (4)
PATCH v12 1/4 ASoC: SDCA: Add PDE verification reusable helper
Implement sdca_asoc_pde_ensure_ps() helper function to poll for PDE
power state transitions. Per SDCA specification, after writing REQUESTED_PS, drivers must poll ACTUAL_PS until the target power state is reached.
Changes include:
- Add sdca_asoc_pde_ensure_ps() to handle ACTUAL_PS polling with support for device-specific delay tables or default intervals
- Export function via sdca_asoc.h for use by SDCA-compliant drivers
- Refactor entity_pde_event() in sdca_asoc.c to use the helper
---
v12:
- use correct namespace while exporting the variable
- fix missing entity information while logging
v11:
- revert v10 changes
- API is renamed from sdca_asoc_pde_ensure_ps to
sdca_asoc_pde_poll_actual_ps
v10:
- write REQUESTED_PS before checking the target state.
- change the API name sdca_asoc_pde_ensure_ps to sdca_asoc_set_pde_poll_sync
v9:
- newly added interface
--- include/sound/sdca_asoc.h | 6 +++ sound/soc/sdca/sdca_asoc.c | 106 ++++++++++++++++++++++++++----------- 2 files changed, 82 insertions(+), 30 deletions(-)
include/sound/sdca_asoc.h +6 -0
@@ -13,6 +13,7 @@struct device ;struct regmap ;struct sdca_function_data ; +struct sdca_pde_delay ;struct snd_ctl_elem_value ;struct snd_kcontrol ;struct snd_kcontrol_new ;
@@ -99,4 +100,9 @@ int sdca_asoc_q78_put_volsw(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol);int sdca_asoc_q78_get_volsw (struct snd_kcontrol *kcontrol,struct snd_ctl_elem_value *ucontrol); +int sdca_asoc_pde_poll_actual_ps (struct device *dev,struct regmap *regmap, +int function_id,int entity_id, +int from_ps,int to_ps, +const struct sdca_pde_delay *pde_delays, +int num_delays);#endif // __SDCA_ASOC_H__
sound/soc/sdca/sdca_asoc.c +76 -30
124 lines not on this page · raw message
Signature · 1 line
2.34.1
PATCH v12 2/4 ASoC: tac5xx2-sdw: add soundwire based codec driver
Add codec driver for tac5xx2 family of devices. This includes the support for
1. tac5572 - DAC, PDM, UAJ and HID
2. tas2883 - Amplifier with DSP
3. tac5672 - Similar to tac5572 with feedback
4. tac5682 - Similar to tac5672 with Amplifier DSP.
---
v12:
- remove check for hw_init in the .set_jack and let regcache handle the device writes correcty.
- add missing pm_rutime_disable in the .remove callback
- improve error logging in .hw_params and .hw_free for pde entities
- improve .hw_free to throw error for unknown dai id
- include part_id in the firmware binary name to avoid potential name collision while using multiple codecs which doesn't have unqiue_id
- updated firmware header parsing to include updated header and log debug information.
v11:
- refactor code for resume to wait for the initialisation to complete and then proceed.
- replace the sdca_asoc_set_pde_pool_sync with sdca_asoc_pde_poll_actual_ps
v10:
- use sdca helper sdca_asoc_set_pde_poll_sync for
changing the power states.
- register .set_jack callback only for if uaj is
available.
v9:
- Update tac5xx2-sdw.c hw_params() and hw_free() to use new SDCA helper sdca_asoc_pde_ensure_ps
- Remove redundant PPU11 initialization as it is there as part of the initialisation table.
- remove unnecessary default value writes for latch clear as the register.
- Improve jack detection and PDE power state transition comments
v8:
- disable interrupts in .set_jack if jack is set to NULL
- hold uaj_lock in .set_jack
- remove unwanted interrupt enable in initialisation
v7:
- refactor remove the cx11, cs18 and cs11 they are not required to be configured for mic
- fix error handling and interrupt cleanup in .set_jack
- fix typo in Kconfig
v6:
- move firmware caching trigger from soundwire bus callback to soundwire probe and make it asynchronous
- validate the firmware fully before starting firmware.
- drop mixer control for cx11 configuration
- check the actual power state in .hw_free after requesting power state transition to power off
- use dev_is_pci() and remove CONFIG_PCI
v5:
- add missing pde_lock while accessing the current power state.
- add uaj_lock to serialize uaj detection update
- return error, if any, returned by sdw_stream_add_slave in hw_parms
- drop snd_soc_unregister_component as we are using devm_snd_soc_register_component
- fix issue in error handling for invalid firmware
- remove unsupported line in/out detection in jack detection
- refactor the jack and button detection logic to be based on their respective interrupt
v4:
- make volume controls as stereo controls for amp gain, playback, dmic and uaj playback.
- better error handling for "CX11 CS Select" mixer control.
- use switch statement for scalability in hw_params and hw_free
- remove unnecessary else in tac_io_init
- change error log for unsupported sample rates to debug logs
- make firmware binary parsing robust by checking the fw size during caching and parsing
v3:
- use macro SDCA_SINGLE_Q78_TLV for the volume mixer controls
- replace magic number with macro for current owner
- fix debug log message about the current owner for hid event
v2:
- Define and use consistent macros for register access to improve code readability and maintainability
- Replace complex event handlers with simpler DAPM widget implementations using direct register control for muting/unmuting and enabling/disabling components
- Replace custom volume controls with standard Q7.8 controls from the SDCA framework
- Fix PDE power state transitions with proper verification of actual power state
- Combine separate locks into a single ops\_lock to protect both firmware operations and power state transitions
- Clean up interrupt handling by removing unnecessary register accesses
- Fix headset microphone control by using the correct mono channel value
- Add comments to clarify firmware handling and critical sections
--- sound/soc/codecs/Kconfig | 11 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tac5xx2-sdw.c | 2046 ++++++++++++++++++++++++++++++++ sound/soc/codecs/tac5xx2.h | 259 ++++ 4 files changed, 2318 insertions(+) create mode 100644 sound/soc/codecs/tac5xx2-sdw.c create mode 100644 sound/soc/codecs/tac5xx2.h
sound/soc/codecs/Kconfig +11 -0
@@ -264,6 +264,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_STA529 imply SND_SOC_STAC9766 imply SND_SOC_STI_SAS + imply SND_SOC_TAC5XX2_SDW imply SND_SOC_TAS2552 imply SND_SOC_TAS2562 imply SND_SOC_TAS2764
@@ -2140,6 +2141,16 @@ config SND_SOC_STAC9766 config SND_SOC_STI_SAS tristate "codec Audio support for STI SAS codec" +config SND_SOC_TAC5XX2_SDW + tristate "Texas Instruments TAC5XX2 SoundWire Smart Amplifier" + depends on SOUNDWIRE + depends on SND_SOC_SDCA + help + This option enables support for Texas Instruments TAC5XX2 family + of SoundWire Smart Amplifiers. This includes TAC5572, TAC5672, + TAC5682 and TAS2883. To compile this driver as a module, choose + M here: the module will be called snd-soc-tac5xx2. + config SND_SOC_TAS2552 tristate "Texas Instruments TAS2552 Mono Audio amplifier" depends on I2C
sound/soc/codecs/Makefile +2 -0
@@ -313,6 +313,7 @@ snd-soc-sta350-y := sta350.o snd-soc-sta529-y := sta529.o snd-soc-stac9766-y := stac9766.o snd-soc-sti-sas-y := sti-sas.o +snd-soc-tac5xx2-sdw-y := tac5xx2-sdw.o snd-soc-tas5086-y := tas5086.o snd-soc-tas571x-y := tas571x.o snd-soc-tas5720-y := tas5720.o
@@ -747,6 +748,7 @@ obj-$(CONFIG_SND_SOC_STA350) += snd-soc-sta350.o obj-$(CONFIG_SND_SOC_STA529) += snd-soc-sta529.o obj-$(CONFIG_SND_SOC_STAC9766) += snd-soc-stac9766.o obj-$(CONFIG_SND_SOC_STI_SAS) += snd-soc-sti-sas.o +obj-$(CONFIG_SND_SOC_TAC5XX2_SDW) += snd-soc-tac5xx2-sdw.o obj-$(CONFIG_SND_SOC_TAS2552) += snd-soc-tas2552.o obj-$(CONFIG_SND_SOC_TAS2562) += snd-soc-tas2562.o obj-$(CONFIG_SND_SOC_TAS2764) += snd-soc-tas2764.o
sound/soc/codecs/tac5xx2-sdw.c new file +2046 -0
2,046 lines not on this page · raw message
sound/soc/codecs/tac5xx2.h new file +259 -0
259 lines not on this page · raw message
Signature · 1 line
2.34.1
Pierre-Louis Bossart
reviewerRe: [PATCH v12 2/4] ASoC: tac5xx2-sdw: add soundwire based codec driver
Quoted 8 lines · Niranjan H Y
Add codec driver for tac5xx2 family of devices. This includes the support for
1. tac5572 - DAC, PDM, UAJ and HID
2. tas2883 - Amplifier with DSP
3. tac5672 - Similar to tac5572 with feedback
4. tac5682 - Similar to tac5672 with Amplifier DSP.Signed-off-by Niranjan H Y <[email protected]>
please check my comments on v11, you still have issues with pm_runtime and set_jack. Thanks
PATCH v12 3/4 ASoC: sdw_utils: TI amp utility for tac5xx2 family
In reply to Niranjan H Y Add TI amp utility for supporting the tac5xx2 family
of devices to support tac5572, tac5672, tac5682 and tas2883
---
v12:
- no change
v11:
- no change
--- include/sound/soc_sdw_utils.h | 4 + sound/soc/sdw_utils/soc_sdw_ti_amp.c | 144 ++++++++++++++++++++++++- sound/soc/sdw_utils/soc_sdw_utils.c | 151 +++++++++++++++++++++++++++ 3 files changed, 298 insertions(+), 1 deletion(-)
include/sound/soc_sdw_utils.h +4 -0
@@ -272,7 +272,11 @@ int asoc_sdw_ti_amp_init(struct snd_soc_card *card,struct asoc_sdw_codec_info *info, bool playback);int asoc_sdw_ti_spk_rtd_init (struct snd_soc_pcm_runtime *rtd,struct snd_soc_dai *dai); +int asoc_sdw_ti_tac5xx2_spk_rtd_init (struct snd_soc_pcm_runtime *rtd, +struct snd_soc_dai *dai);int asoc_sdw_ti_amp_initial_settings (struct snd_soc_card *card,const char *name_prefix); +int asoc_sdw_ti_dmic_rtd_init (struct snd_soc_pcm_runtime *rtd,struct snd_soc_dai *dai); +int asoc_sdw_ti_sdca_jack_rtd_init (struct snd_soc_pcm_runtime *rtd,struct snd_soc_dai *dai);#endif
sound/soc/sdw_utils/soc_sdw_ti_amp.c +143 -1
158 lines not on this page · raw message
sound/soc/sdw_utils/soc_sdw_utils.c +151 -0
157 lines not on this page · raw message
Signature · 1 line
2.34.1
PATCH v12 4/4 ASoC: tac5xx2-sdw: ACPI match for intel mtl platform
In reply to Niranjan H Y Add acpi match entries to support TI's tac5572,
tas2883, tac5672 and tac5682 on link 0 on MTL machine.
---
v12:
- no change
v11:
- no change
--- .../intel/common/soc-acpi-intel-mtl-match.c | 132 ++++++++++++++++++ 1 file changed, 132 insertions(+)
sound/soc/intel/common/soc-acpi-intel-mtl-match.c +132 -0
@@ -122,6 +122,42 @@ static const struct snd_soc_acpi_endpoint spk_r_endpoint = { .group_id = 1, }; +static const struct snd_soc_acpi_endpoint tac5xx2_endpoints[] = { + {/* Playback Endpoint */ + .num =0 , + .aggregated =0 , + .group_position =0 , + .group_id =0 , + }, + {/* Mic Capture Endpoint */ + .num =1 , + .aggregated =0 , + .group_position =0 , + .group_id =0 , + }, + {/* UAJ-HP with Mic Endpoint */ + .num =2 , + .aggregated =0 , + .group_position =0 , + .group_id =0 , + }, +}; + +static const struct snd_soc_acpi_endpoint tas2883_endpoints[] = { + {/* Playback Endpoint */ + .num =0 , + .aggregated =0 , + .group_position =0 , + .group_id =0 , + }, + {/* Mic Capture Endpoint */ + .num =1 , + .aggregated =0 , + .group_position =0 , + .group_id =0 , + }, +}; +static const struct snd_soc_acpi_endpoint rt712_endpoints[] = { { .num =0 ,
@@ -1011,6 +1047,33 @@ static const struct snd_soc_acpi_adr_device cs42l42_0_adr[] = { } }; +static const struct snd_soc_acpi_adr_device tac5572_0_adr[] = { + { + .adr =0x0000300102557201ull , + .num_endpoints =ARRAY_SIZE (tac5xx2_endpoints), + .endpoints = tac5xx2_endpoints, + .name_prefix ="tac5572" + } +}; + +static const struct snd_soc_acpi_adr_device tac5672_0_adr[] = { + { + .adr =0x0000300102567201ull , + .num_endpoints =ARRAY_SIZE (tac5xx2_endpoints), + .endpoints = tac5xx2_endpoints, + .name_prefix ="tac5672" + } +}; + +static const struct snd_soc_acpi_adr_device tac5682_0_adr[] = { + { + .adr =0x0000300102568201ull , + .num_endpoints =ARRAY_SIZE (tac5xx2_endpoints), + .endpoints = tac5xx2_endpoints, + .name_prefix ="tac5682" + } +}; +static const struct snd_soc_acpi_adr_device tas2783_0_adr[] = { { .adr =0x00003c0102000001ull ,
@@ -1035,9 +1098,45 @@ static const struct snd_soc_acpi_adr_device tas2783_0_adr[] = { .num_endpoints = 1, .endpoints = &spk_r_endpoint, .name_prefix ="tas2783-4" + }, +}; + +static const struct snd_soc_acpi_adr_device tas2883_0_adr[] = { + { + .adr =0x0000300102288301ull , + .num_endpoints =ARRAY_SIZE (tas2883_endpoints), + .endpoints = tas2883_endpoints, + .name_prefix ="tas2883" } }; +static const struct snd_soc_acpi_link_adr tac5572_l0[] = { + { + .mask =BIT (0 ), + .num_adr =ARRAY_SIZE (tac5572_0_adr), + .adr_d = tac5572_0_adr, + }, + {} +}; + +static const struct snd_soc_acpi_link_adr tac5672_l0[] = { + { + .mask =BIT (0 ), + .num_adr =ARRAY_SIZE (tac5672_0_adr), + .adr_d = tac5672_0_adr, + }, + {} +}; + +static const struct snd_soc_acpi_link_adr tac5682_l0[] = { + { + .mask =BIT (0 ), + .num_adr =ARRAY_SIZE (tac5682_0_adr), + .adr_d = tac5682_0_adr, + }, + {} +}; +static const struct snd_soc_acpi_link_adr tas2783_link0[] = { { .mask =BIT (0 ),
@@ -1047,6 +1146,15 @@ static const struct snd_soc_acpi_link_adr tas2783_link0[] = { {} }; +static const struct snd_soc_acpi_link_adr tas2883_l0[] = { + { + .mask =BIT (0 ), + .num_adr =ARRAY_SIZE (tas2883_0_adr), + .adr_d = tas2883_0_adr, + }, + {} +}; +static const struct snd_soc_acpi_link_adr cs42l42_link0_max98363_link2[] = {/* Expected order: jack -> amp */ {
@@ -1208,12 +1316,36 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_mtl_sdw_machines[] = { .drv_name = "sof_sdw", .sof_tplg_filename = "sof-mtl-rt715-rt711-rt1308-mono.tplg", }, + { + .link_mask = BIT(0), + .links = tac5572_l0, + .drv_name = "sof_sdw", + .sof_tplg_filename = "sof-mtl-tac5572.tplg", + }, + { + .link_mask = BIT(0), + .links = tac5672_l0, + .drv_name = "sof_sdw", + .sof_tplg_filename = "sof-mtl-tac5672.tplg", + }, + { + .link_mask = BIT(0), + .links = tac5682_l0, + .drv_name = "sof_sdw", + .sof_tplg_filename = "sof-mtl-tac5682.tplg", + }, { .link_mask = BIT(0), .links = tas2783_link0, .drv_name = "sof_sdw", .sof_tplg_filename = "sof-mtl-tas2783.tplg", }, + { + .link_mask = BIT(0), + .links = tas2883_l0, + .drv_name = "sof_sdw", + .sof_tplg_filename = "sof-mtl-tas2883.tplg", + }, { .link_mask = GENMASK(3, 0), .links = mtl_rt713_l0_rt1316_l12_rt1713_l3,
Signature · 1 line
2.34.1
Quoted 5 lines · Niranjan H Y
Implement
sdca_asoc_pde_ensure_ps()helper function to poll for PDE
power state transitions. Per SDCA specification, after writingREQUESTED_PS, drivers must pollACTUAL_PSuntil the target power state is reached.
Quoted 8 lines
Changes include:
- Addsdca_asoc_pde_ensure_ps()to handleACTUAL_PSpolling with support for device-specific delay tables or default intervals
- Export function viasdca_asoc.hfor use by SDCA-compliant drivers
- Refactorentity_pde_event()insdca_asoc.cto use the helperSigned-off-by Niranjan H Y <[email protected]>---
Thanks,
Charles