7.0.9-rc1 review
Subsystems (2)
Greg Kroah-Hartman
maintainerPATCH 1/201 HID: playstation: Clamp num_touch_reports
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: T.J. Mercier <[email protected]>
commit cac61b58a3b6340c52afa06bb15eac033158db2f upstream.
A device would never lie about the number of touch reports would it?
If it does the loop in dualshock4_parse_report will read off the end of the touch_reports array, up to about 2 KiB for the maximum number of 256 loop iteraions. The data that is read is emitted via evdev if the DS4_TOUCH_POINT_INACTIVE bit happens to be set. Protect against this by clamping the num_touch_reports value provided by the device to the maximum size of the touch_reports array.
--- drivers/hid/hid-playstation.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/hid/hid-playstation.c +4 -2
@@ -2378,7 +2378,8 @@ static int dualshock4_parse_report(struc (struct dualshock4_input_report_usb *)data; ds4_report = &usb->common; - num_touch_reports = usb->num_touch_reports; + num_touch_reports =min_t (u8, usb->num_touch_reports, +ARRAY_SIZE (usb->touch_reports)); touch_reports = usb->touch_reports; }else if (hdev->bus ==BUS_BLUETOOTH && report->id ==DS4_INPUT_REPORT_BT && size ==DS4_INPUT_REPORT_BT_SIZE ) {
@@ -2392,7 +2393,8 @@ static int dualshock4_parse_report(struc } ds4_report = &bt->common; - num_touch_reports = bt->num_touch_reports; + num_touch_reports =min_t (u8, bt->num_touch_reports, +ARRAY_SIZE (bt->touch_reports)); touch_reports = bt->touch_reports; } else if (hdev->bus == BUS_BLUETOOTH && report->id == DS4_INPUT_REPORT_BT_MINIMAL &&
Greg Kroah-Hartman
maintainerPATCH 10/201 media: nxp: imx8-isi: Reduce minimum queued buffers from 2 to 0
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Guoniu Zhou <[email protected]>
commit 2f38622d0f85f317be9e6b131da6cd511db94fd2 upstream.
Fix a hang issue when capturing a single frame with applications like cam in libcamera. It would hang waiting for the driver to complete the buffer, but streaming never starts because min_queued_buffers was set to 2.
The ISI module uses a ping-pong buffer mechanism that requires two buffers to be programmed at all times. However, when fewer than 2 user buffers are available, the driver use internal discard buffers to fill the remaining slot(s). Reduce minimum queued buffers from 2 to 0 allows streaming to start without any queued buffers.
--- drivers/media/platform/nxp/imx8-isi/imx8-isi-video.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/media/platform/nxp/imx8-isi/imx8-isi-video.c +1 -1
@@ -1410,7 +1410,7 @@ int mxc_isi_video_register(struct mxc_is q->mem_ops = &vb2_dma_contig_memops; q->buf_struct_size =sizeof (struct mxc_isi_buffer ); q->timestamp_flags =V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC ; - q->min_queued_buffers =2 ; + q->min_queued_buffers =0 ; q->lock = &video->lock; q->dev = pipe->isi->dev;
Greg Kroah-Hartman
maintainerPATCH 11/201 media: rzv2h-ivc: Write AXIRX_PIXFMT once
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Barnabás Pőcze <[email protected]>
commit d901c428350245f2b26431e03c4ba0bdc7a71243 upstream.
The documentation prescribes that invalid formats should not be set, so do a single write to ensure that both the CLFMT and DTYPE fields are set to valid values.
--- drivers/media/platform/renesas/rzv2h-ivc/rzv2h-ivc-video.c | 8 ++++---- drivers/media/platform/renesas/rzv2h-ivc/rzv2h-ivc.h | 7 ++++--- 2 files changed, 8 insertions(+), 7 deletions(-)
drivers/media/platform/renesas/rzv2h-ivc/rzv2h-ivc-video.c +4 -4
@@ -218,10 +218,10 @@ static void rzv2h_ivc_format_configure(s/* Currently only CRU packed pixel formats are supported */ rzv2h_ivc_write (ivc,RZV2H_IVC_REG_AXIRX_PXFMT , -RZV2H_IVC_INPUT_FMT_CRU_PACKED ); - -rzv2h_ivc_update_bits (ivc,RZV2H_IVC_REG_AXIRX_PXFMT , -RZV2H_IVC_PXFMT_DTYPE , fmt->dtype); +FIELD_PREP (RZV2H_IVC_AXIRX_PXFMT_FIELD_DTYPE , + fmt->dtype) | +FIELD_PREP (RZV2H_IVC_AXIRX_PXFMT_FIELD_CLFMT , +RZV2H_IVC_CLFMT_CRU_PACKED ));rzv2h_ivc_write (ivc,RZV2H_IVC_REG_AXIRX_HSIZE , pix->width);rzv2h_ivc_write (ivc,RZV2H_IVC_REG_AXIRX_VSIZE , pix->height);
drivers/media/platform/renesas/rzv2h-ivc/rzv2h-ivc.h +4 -3
@@ -24,9 +24,10 @@#define RZV2H_IVC_ONE_EXPOSURE 0x00#define RZV2H_IVC_TWO_EXPOSURE 0x01#define RZV2H_IVC_REG_AXIRX_PXFMT 0x0004 -#define RZV2H_IVC_INPUT_FMT_MIPI (0 << 16) -#define RZV2H_IVC_INPUT_FMT_CRU_PACKED BIT(16) -#define RZV2H_IVC_PXFMT_DTYPE GENMASK(7, 0) +#define RZV2H_IVC_AXIRX_PXFMT_FIELD_CLFMT GENMASK(17, 16) +#define RZV2H_IVC_CLFMT_MIPI 0 +#define RZV2H_IVC_CLFMT_CRU_PACKED 1 +#define RZV2H_IVC_AXIRX_PXFMT_FIELD_DTYPE GENMASK(7, 0)#define RZV2H_IVC_REG_AXIRX_SADDL_P0 0x0010#define RZV2H_IVC_REG_AXIRX_SADDH_P0 0x0014#define RZV2H_IVC_REG_AXIRX_SADDL_P1 0x0018
Greg Kroah-Hartman
maintainerPATCH 12/201 media: rzv2h-ivc: Fix FM_STOP register write
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Barnabás Pőcze <[email protected]>
commit 562d2e0a672075292e92538dad61664e89b34d30 upstream.
Bit 20 should be written in this register to stop frame processing. So fix that, as well as the poll condition.
--- drivers/media/platform/renesas/rzv2h-ivc/rzv2h-ivc-video.c | 5 +++-- drivers/media/platform/renesas/rzv2h-ivc/rzv2h-ivc.h | 1 + 2 files changed, 4 insertions(+), 2 deletions(-)
drivers/media/platform/renesas/rzv2h-ivc/rzv2h-ivc-video.c +3 -2
@@ -300,9 +300,10 @@ static void rzv2h_ivc_stop_streaming(strstruct rzv2h_ivc *ivc =vb2_get_drv_priv (q);u32 val =0 ; -rzv2h_ivc_write (ivc,RZV2H_IVC_REG_FM_STOP ,0x1 ); +rzv2h_ivc_write (ivc,RZV2H_IVC_REG_FM_STOP ,RZV2H_IVC_REG_FM_STOP_FSTOP );readl_poll_timeout (ivc->base +RZV2H_IVC_REG_FM_STOP , - val, !val,10 *USEC_PER_MSEC ,250 *USEC_PER_MSEC ); + val, !(val &RZV2H_IVC_REG_FM_STOP_FSTOP ), +10 *USEC_PER_MSEC ,250 *USEC_PER_MSEC );rzv2h_ivc_return_buffers (ivc,VB2_BUF_STATE_ERROR );video_device_pipeline_stop (&ivc->vdev.dev);
drivers/media/platform/renesas/rzv2h-ivc/rzv2h-ivc.h +1 -0
@@ -46,6 +46,7 @@#define RZV2H_IVC_REG_FM_MCON 0x0104#define RZV2H_IVC_REG_FM_FRCON 0x0108#define RZV2H_IVC_REG_FM_STOP 0x010c +#define RZV2H_IVC_REG_FM_STOP_FSTOP BIT(20)#define RZV2H_IVC_REG_FM_INT_EN 0x0120#define RZV2H_IVC_VVAL_IFPE BIT(0)#define RZV2H_IVC_REG_FM_INT_STA 0x0124
Greg Kroah-Hartman
maintainerPATCH 13/201 media: rzv2h-ivc: Fix concurrent buffer list access
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Barnabás Pőcze <[email protected]>
commit 72773ff1cdfaebc593f53b1719b2c1773ecf8c43 upstream.
The list of buffers (rzv2h_ivc::buffers.queue) is protected by a spinlock (rzv2h_ivc::buffers.lock). However, in rzv2h_ivc_transfer_buffer(), which runs in a separate workqueue, the list_del() call is executed without holding the spinlock, which makes it possible for the list to be concurrently modified
Fix that by removing a buffer from the list in the lock protected section.
--- drivers/media/platform/renesas/rzv2h-ivc/rzv2h-ivc-video.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-)
drivers/media/platform/renesas/rzv2h-ivc/rzv2h-ivc-video.c +5 -6
@@ -158,14 +158,13 @@ static void rzv2h_ivc_transfer_buffer(st scoped_guard(spinlock_irqsave, &ivc->buffers.lock) { buf =list_first_entry_or_null (&ivc->buffers.queue, struct rzv2h_ivc_buf, queue); - } - -if (!buf) -return ; +if (!buf) +return ; -list_del (&buf->queue); +list_del (&buf->queue); + ivc->buffers.curr = buf; + } - ivc->buffers.curr = buf; buf->addr =vb2_dma_contig_plane_dma_addr (&buf->vb.vb2_buf,0 );rzv2h_ivc_write (ivc,RZV2H_IVC_REG_AXIRX_SADDL_P0 , buf->addr);
Greg Kroah-Hartman
maintainerPATCH 14/201 media: mali-c55: Initialize the ISP in enable_streams()
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jacopo Mondi <[email protected]>
commit d5c24b71da547fdb5bea51a69d62f9e2a609431d upstream.
The Mali C55 driver initializes the ISP in two points:
1) At probe time it disables ISP blocks by configuring them in bypass mode
2) At enable_streams() it initializes the crop rectangles and the image processing pipeline using the current image format
However, as ISP blocks are configured by userspace, if their configuration is not reset, from the second enable_streams() call onwards the ISP configuration will depend on the previous streaming session configuration.
To re-initialize the ISP completely at enable_streams() time consolidate the ISP block bypass configuration and the image processing path configuration in a single function to be called at enabled_streams() time.
--- drivers/media/platform/arm/mali-c55/mali-c55-common.h | 2 drivers/media/platform/arm/mali-c55/mali-c55-core.c | 35 -------- drivers/media/platform/arm/mali-c55/mali-c55-isp.c | 37 +-------- drivers/media/platform/arm/mali-c55/mali-c55-params.c | 72 ++++++++++++++++++ 4 files changed, 79 insertions(+), 67 deletions(-)
drivers/media/platform/arm/mali-c55/mali-c55-common.h +2 -0
@@ -306,5 +306,7 @@ bool mali_c55_pipeline_ready(struct malivoid mali_c55_stats_fill_buffer (struct mali_c55 *mali_c55,enum mali_c55_config_spaces cfg_space);void mali_c55_params_write_config (struct mali_c55 *mali_c55); +void mali_c55_params_init_isp_config (struct mali_c55 *mali_c55, +const struct v4l2_subdev_state *state);#endif /* _MALI_C55_COMMON_H */
drivers/media/platform/arm/mali-c55/mali-c55-core.c +0 -35
@@ -663,41 +663,6 @@ static int mali_c55_init_context(struct mali_c55->base + config_space_addrs[MALI_C55_CONFIG_PING ], MALI_C55_CONFIG_SPACE_SIZE); -/* -* Some features of the ISP need to be disabled by default and only -* enabled at the same time as they're configured by a parameters buffer -*/ - -/* Bypass the sqrt and square compression and expansion modules */ -mali_c55_ctx_update_bits (mali_c55,MALI_C55_REG_BYPASS_1 , -MALI_C55_REG_BYPASS_1_FE_SQRT , -MALI_C55_REG_BYPASS_1_FE_SQRT ); -mali_c55_ctx_update_bits (mali_c55,MALI_C55_REG_BYPASS_3 , -MALI_C55_REG_BYPASS_3_SQUARE_BE , -MALI_C55_REG_BYPASS_3_SQUARE_BE ); - -/* Bypass the temper module */ -mali_c55_ctx_write (mali_c55,MALI_C55_REG_BYPASS_2 , -MALI_C55_REG_BYPASS_2_TEMPER ); - -/* Disable the temper module's DMA read/write */ -mali_c55_ctx_write (mali_c55,MALI_C55_REG_TEMPER_DMA_IO ,0x0 ); - -/* Bypass the colour noise reduction */ -mali_c55_ctx_write (mali_c55,MALI_C55_REG_BYPASS_4 , -MALI_C55_REG_BYPASS_4_CNR ); - -/* Disable the sinter module */ -mali_c55_ctx_update_bits (mali_c55,MALI_C55_REG_SINTER_CONFIG , -MALI_C55_SINTER_ENABLE_MASK ,0 ); - -/* Disable the RGB Gamma module for each output */ -mali_c55_ctx_write (mali_c55,MALI_C55_REG_FR_GAMMA_RGB_ENABLE ,0 ); -mali_c55_ctx_write (mali_c55,MALI_C55_REG_DS_GAMMA_RGB_ENABLE ,0 ); - -/* Disable the colour correction matrix */ -mali_c55_ctx_write (mali_c55,MALI_C55_REG_CCM_ENABLE ,0 ); -return 0 ; }
drivers/media/platform/arm/mali-c55/mali-c55-isp.c +5 -32
@@ -112,9 +112,6 @@ static int mali_c55_isp_start(struct mal const struct v4l2_subdev_state *state) {struct mali_c55_context *ctx =mali_c55_get_active_context (mali_c55); -const struct mali_c55_isp_format_info *cfg; -const struct v4l2_mbus_framefmt *format; -const struct v4l2_rect *crop;u32 val;int ret;
@@ -122,35 +119,11 @@ static int mali_c55_isp_start(struct malMALI_C55_REG_MCU_CONFIG_WRITE_MASK , MALI_C55_REG_MCU_CONFIG_WRITE_PING); -/* Apply input windowing */ - crop =v4l2_subdev_state_get_crop (state,MALI_C55_ISP_PAD_SINK_VIDEO ); - format =v4l2_subdev_state_get_format (state, -MALI_C55_ISP_PAD_SINK_VIDEO ); - cfg =mali_c55_isp_get_mbus_config_by_code (format->code); - -mali_c55_write (mali_c55,MALI_C55_REG_HC_START , -MALI_C55_HC_START (crop->left)); -mali_c55_write (mali_c55,MALI_C55_REG_HC_SIZE , -MALI_C55_HC_SIZE (crop->width)); -mali_c55_write (mali_c55,MALI_C55_REG_VC_START_SIZE , -MALI_C55_VC_START (crop->top) | -MALI_C55_VC_SIZE (crop->height)); -mali_c55_ctx_update_bits (mali_c55,MALI_C55_REG_BASE_ADDR , -MALI_C55_REG_ACTIVE_WIDTH_MASK , format->width); -mali_c55_ctx_update_bits (mali_c55,MALI_C55_REG_BASE_ADDR , -MALI_C55_REG_ACTIVE_HEIGHT_MASK , - format->height <<16 ); -mali_c55_ctx_update_bits (mali_c55,MALI_C55_REG_BAYER_ORDER , -MALI_C55_BAYER_ORDER_MASK , cfg->order); -mali_c55_ctx_update_bits (mali_c55,MALI_C55_REG_INPUT_WIDTH , -MALI_C55_INPUT_WIDTH_MASK , -MALI_C55_INPUT_WIDTH_20BIT ); - -mali_c55_ctx_update_bits (mali_c55,MALI_C55_REG_ISP_RAW_BYPASS , -MALI_C55_ISP_RAW_BYPASS_BYPASS_MASK , - cfg->bypass ?MALI_C55_ISP_RAW_BYPASS_BYPASS_MASK : -0x00 ); - +/* +* Apply default ISP configuration and the apply configurations from +* the first available parameters buffer. +*/ +mali_c55_params_init_isp_config (mali_c55, state);mali_c55_params_write_config (mali_c55); ret =mali_c55_config_write (ctx,MALI_C55_CONFIG_PING , true);if (ret) {
drivers/media/platform/arm/mali-c55/mali-c55-params.c +72 -0
78 lines not on this page · raw message
Greg Kroah-Hartman
maintainerPATCH 15/201 media: mali-c55: Fix Iridix bypass macros
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Scally <[email protected]>
commit db7faf488ecf846c46884310ff1bf28daf2ad39a upstream.
The Mali C55 Iridix block has a digital gain function and tone mapping function, whose enablement is controlled by two different bits in the BYPASS_3 register.
Unfortunately, the "Gain" and "Tonemap" bypass bit definitions are the wrong way around. Swap them.
--- drivers/media/platform/arm/mali-c55/mali-c55-registers.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/media/platform/arm/mali-c55/mali-c55-registers.h +2 -2
@@ -128,8 +128,8 @@ enum mali_c55_interrupts {#define MALI_C55_REG_BYPASS_3_SENSOR_OFFSET_PRE_SH BIT(1)#define MALI_C55_REG_BYPASS_3_MESH_SHADING BIT(3)#define MALI_C55_REG_BYPASS_3_WHITE_BALANCE BIT(4) -#define MALI_C55_REG_BYPASS_3_IRIDIX BIT(5) -#define MALI_C55_REG_BYPASS_3_IRIDIX_GAIN BIT(6) +#define MALI_C55_REG_BYPASS_3_IRIDIX_GAIN BIT(5) +#define MALI_C55_REG_BYPASS_3_IRIDIX BIT(6)#define MALI_C55_REG_BYPASS_4 0x18ec0#define MALI_C55_REG_BYPASS_4_DEMOSAIC_RGB BIT(1)#define MALI_C55_REG_BYPASS_4_PF_CORRECTION BIT(3)
Greg Kroah-Hartman
maintainerPATCH 16/201 media: mali-c55: Fix wrong comment of ISP block types
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jacopo Mondi <[email protected]>
commit df16624248296ce4e8890c7ddcc95f0ccb642bcd upstream.
Some bad copy&paste happened in the description of the ISP block types and AWB_CONFIG got mixed up with SHADING_CONFIG.
Fix it by assigning to each block the correct type.
As only the comment is changed, there is no uABI breakage or regression.
--- drivers/media/platform/arm/mali-c55/mali-c55-params.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/media/platform/arm/mali-c55/mali-c55-params.c +3 -3
@@ -43,9 +43,9 @@* @digital_gain: For header->type == MALI_C55_PARAM_BLOCK_DIGITAL_GAIN * @awb_gains: For header->type == MALI_C55_PARAM_BLOCK_AWB_GAINS and * header->type = MALI_C55_PARAM_BLOCK_AWB_GAINS_AEXP -* @awb_config: For header->type == MALI_C55_PARAM_MESH_SHADING_CONFIG -* @shading_config: For header->type == MALI_C55_PARAM_MESH_SHADING_SELECTION -* @shading_selection: For header->type == MALI_C55_PARAM_BLOCK_SENSOR_OFFS +* @awb_config: For header->type == MALI_C55_PARAM_BLOCK_AWB_CONFIG +* @shading_config: For header->type == MALI_C55_PARAM_MESH_SHADING_CONFIG +* @shading_selection: For header->type == MALI_C55_PARAM_MESH_SHADING_SELECTION * @data: Allows easy initialisation of a union variable with a * pointer into a __u8 array. */
Signature · 1 line
2.54.0
Greg Kroah-Hartman
maintainerPATCH 17/201 media: renesas: vsp1: Fix NULL pointer deref on module unload
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tomi Valkeinen <[email protected]>
commit 58b1e9664d8f74d55d8411cc7a7b275a76a6f24f upstream.
When unloading the module on gen 4, we hit a NULL pointer dereference. This is caused by the cleanup code calling vsp1_drm_cleanup() where it should be calling vsp1_vspx_cleanup().
Fix this by checking the IP version and calling the drm or vspx function accordingly, the same way as the init code does.
--- drivers/media/platform/renesas/vsp1/vsp1_drv.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/media/platform/renesas/vsp1/vsp1_drv.c +6 -2
@@ -240,8 +240,12 @@ static void vsp1_destroy_entities(structmedia_device_unregister (&vsp1->media_dev);media_device_cleanup (&vsp1->media_dev); -if (!vsp1->info->uapi) -vsp1_drm_cleanup (vsp1); +if (!vsp1->info->uapi) { +if (vsp1->info->version ==VI6_IP_VERSION_MODEL_VSPX_GEN4 ) +vsp1_vspx_cleanup (vsp1); +else +vsp1_drm_cleanup (vsp1); + } }static int vsp1_create_entities (struct vsp1_device *vsp1)
Greg Kroah-Hartman
maintainerPATCH 18/201 media: renesas: vin: Fix RAW8 (again)
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tomi Valkeinen <[email protected]>
commit 40c6da8a9c0f897f99a439330584d93ca7d41226 upstream.
Commit e7376745ad5c ("media: rcar-vin: Fix stride setting for RAW8 formats") removed dividing the stride by two for RAW8 formats. It is unclear how this was tested, but in any of the recent tests this does not seem to work and produces quite distorted images.
However, reverting the patch fixes the issues only partially. VNIS_REG requires alignment to 16 bytes, and when dividing the stride by 2, in some cases we end up with a non-aligned stride, producing a tilted image. This issue has to be fixed in rvin_format_bytesperline() where we do the alignment for bytesperline.
Adding back the stride division and increasing the alignment for RAW8 formats to 0x20 fixes the problems related to RAW8.
--- drivers/media/platform/renesas/rcar-vin/rcar-dma.c | 22 ++++++++++++++++++++ drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c | 12 ++++++++++ 2 files changed, 34 insertions(+)
drivers/media/platform/renesas/rcar-vin/rcar-dma.c +22 -0
@@ -676,8 +676,30 @@ void rvin_crop_scale_comp(struct rvin_deif (vin->scaler) vin->scaler (vin); +/* +* VNIS_REG has four lowest bits always 0, i.e. the stride has to be +* aligned to 16 bytes. This is done in rvin_format_bytesperline(). +*/ + fmt =rvin_format_from_pixel (vin, vin->format.pixelformat); stride = vin->format.bytesperline / fmt->bpp; + +/* +* RAW8 format bpp is 1, but the hardware process RAW8 format in 2 pixel +* units, so we need to divide the stride by 2. +*/ +switch (vin->format.pixelformat) { +case V4L2_PIX_FMT_SBGGR8 : +case V4L2_PIX_FMT_SGBRG8 : +case V4L2_PIX_FMT_SGRBG8 : +case V4L2_PIX_FMT_SRGGB8 : +case V4L2_PIX_FMT_GREY : + stride /=2 ; +break ; +default : +break ; + } +rvin_write (vin, stride,VNIS_REG ); }
drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c +12 -0
@@ -155,6 +155,18 @@ static u32 rvin_format_bytesperline(strucase V4L2_PIX_FMT_NV16 : align =0x20 ;break ; +case V4L2_PIX_FMT_SBGGR8 : +case V4L2_PIX_FMT_SGBRG8 : +case V4L2_PIX_FMT_SGRBG8 : +case V4L2_PIX_FMT_SRGGB8 : +case V4L2_PIX_FMT_GREY : +/* +* RAW8 format bpp is 1, but the hardware process RAW8 format in +* 2 pixel units, and we need to align to 32 bytes. See +* rvin_crop_scale_comp(). +*/ + align =0x20 ; +break ;default : align =0x10 ;break ;
Greg Kroah-Hartman
maintainerPATCH 19/201 media: i2c: ov8856: free control handler on error in ov8856_init_controls()
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexander Koskovich <[email protected]>
commit f75e160745663ce9b13362ae6e90bd439c58df69 upstream.
The control handler wasn't freed if adding controls failed, add an error exit label and convert the existing error return to use it.
--- drivers/media/i2c/ov8856.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
drivers/media/i2c/ov8856.c +8 -2
@@ -1951,12 +1951,18 @@ static int ov8856_init_controls(struct o V4L2_CID_HFLIP, 0, 1, 1, 0);v4l2_ctrl_new_std (ctrl_hdlr, &ov8856_ctrl_ops,V4L2_CID_VFLIP ,0 ,1 ,1 ,0 ); -if (ctrl_hdlr->error) -return ctrl_hdlr->error; +if (ctrl_hdlr->error) { + ret = ctrl_hdlr->error; + goto err_ctrl_handler_free; + } ov8856->sd.ctrl_handler = ctrl_hdlr;return 0 ; + +err_ctrl_handler_free: +v4l2_ctrl_handler_free (ctrl_hdlr); +return ret; } static void ov8856_update_pad_format(struct ov8856 *ov8856,
Greg Kroah-Hartman
maintainerPATCH 2/201 HID: appletb-kbd: fix UAF in inactivity-timer cleanup path
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sangyun Kim <[email protected]>
commit 4db2af929279c799b5653a39eb0795c72baffca4 upstream.
Commit 38224c472a03 ("HID: appletb-kbd: fix slab use-after-free bug in appletb_kbd_probe") added timer_delete_sync(&kbd->inactivity_timer) to both the probe close_hw error path and appletb_kbd_remove(), but the way it was wired in left the inactivity timer reachable during driver tear-down via two distinct windows.
Window A -- put_device() before timer_delete_sync():
put_device(&kbd->backlight_dev->dev); timer_delete_sync(&kbd->inactivity_timer);
The inactivity_timer softirq reads kbd->backlight_dev and calls backlight_device_set_brightness() -> mutex_lock(&ops_lock). If a concurrent hid_appletb_bl unbind drops the last devm reference between these two calls, the backlight_device is freed and the mutex_lock() touches freed memory.
Window B -- backlight cleanup before hid_hw_stop():
if (kbd->backlight_dev) {
timer_delete_sync(...);
put_device(...);
}
hid_hw_close(hdev);
hid_hw_stop(hdev);Even after Window A is closed, hid_hw_close()/hid_hw_stop() still run afterwards, so a late ".event" callback from the HID core (USB URB completion on real Apple hardware) can arrive after timer_delete_sync() drained the softirq but before put_device() drops the reference. That callback reaches reset_inactivity_timer(), which calls mod_timer() and re-arms the timer. The freshly re-armed timer can then fire on the about-to-be-freed backlight_device.
Both windows produce the same KASAN slab-use-after-free:
BUG: KASAN: slab-use-after-free in __mutex_lock+0x1aab/0x21c0 Read of size 8 at addr ffff88803ee9a108 by task swapper/0/0 Call Trace: <IRQ> __mutex_lock backlight_device_set_brightness appletb_inactivity_timer call_timer_fn run_timer_softirq handle_softirqs Allocated by task N: devm_backlight_device_register appletb_bl_probe Freed by task M: (concurrent hid_appletb_bl unbind path)
Close both windows at once by reworking the tear-down in appletb_kbd_remove() and in the probe close_hw error path so that
1) hid_hw_close()/hid_hw_stop() run before the backlight cleanup, guaranteeing no further .event callback can fire and re-arm the timer, and
2) inside the "if (kbd->backlight_dev)" block, timer_delete_sync() runs before put_device(), so the softirq is drained before the final reference is dropped.
--- drivers/hid/hid-appletb-kbd.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
drivers/hid/hid-appletb-kbd.c +8 -8
@@ -440,13 +440,13 @@ static int appletb_kbd_probe(struct hid_ unregister_handler:input_unregister_handler (&kbd->inp_handler); close_hw: -if (kbd->backlight_dev) { -put_device (&kbd->backlight_dev->dev); -timer_delete_sync (&kbd->inactivity_timer); - }hid_hw_close (hdev); stop_hw:hid_hw_stop (hdev); +if (kbd->backlight_dev) { +timer_delete_sync (&kbd->inactivity_timer); +put_device (&kbd->backlight_dev->dev); + }return ret; }
@@ -457,13 +457,13 @@ static void appletb_kbd_remove(struct hiappletb_kbd_set_mode (kbd,APPLETB_KBD_MODE_OFF );input_unregister_handler (&kbd->inp_handler); +hid_hw_close (hdev); +hid_hw_stop (hdev); +if (kbd->backlight_dev) { -put_device (&kbd->backlight_dev->dev);timer_delete_sync (&kbd->inactivity_timer); +put_device (&kbd->backlight_dev->dev); } - -hid_hw_close (hdev); -hid_hw_stop (hdev); }static int appletb_kbd_suspend (struct hid_device *hdev,pm_message_t msg)
Greg Kroah-Hartman
maintainerPATCH 20/201 media: dt-bindings: rockchip,vdec: Add alternative reg-names order for RK35{76,88}
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Cristian Ciocaltea <[email protected]>
commit 35c8178ed2bd9821a75a406d762b2f2e161f9c70 upstream.
With the introduction of the RK3588 SoC, and RK3576 afterwards, three register blocks have been provided for the video decoder unit instead of just one, which are further referenced in vendor's datasheet by 'link table', 'function' and 'cache'. The former is present at the top of the listing, starting at video decoder unit base address.
However, while documenting RK3588, the binding broke the convention expecting the unit address to indicate the start of the primary register range, i.e. the 'function' block got listed before the 'link' one.
Since the binding changes have been already released and a fix would bring up an ABI break, mark the current 'reg-names' ordering as deprecated and introduce an alternative 'link,function,cache' listing which follows the address-based ordering according to the TRM.
Additionally, drop the 'reg' description items as the order is not fixed anymore, while the information they offer is not very relevant anyway.
It's worth noting there are currently no (known) users impacted by these binding changes, since the video decoder support for the aforementioned SoCs in mainline driver and devicetrees hasn't been released yet - it landed in v7.0-rc1 while all DTS updates resulting from this will be handled before v7.0 is out.
--- Documentation/devicetree/bindings/media/rockchip,vdec.yaml | 20 +++++++------ 1 file changed, 12 insertions(+), 8 deletions(-)
Documentation/devicetree/bindings/media/rockchip,vdec.yaml +12 -8
@@ -28,16 +28,20 @@ properties: reg: minItems: 1 - items: - - description: The function configuration registers base - - description: The link table configuration registers base - - description: The cache configuration registers base + maxItems: 3 reg-names: - items: - - const: function - - const: link - - const: cache + oneOf: + - items: + - const: link + - const: function + - const: cache + - items: + - const: function + - const: link + - const: cache + deprecated: true + description: Use link,function,cache block order instead. interrupts: maxItems: 1
Greg Kroah-Hartman
maintainerPATCH 21/201 media: dt-bindings: rockchip,vdec: Mark reg-names required for RK35{76,88}
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Cristian Ciocaltea <[email protected]>
commit a11db8d8b403eba1f82728f440727128e9997edd upstream.
The Rockchip Video Decoder driver expects reg-names to be mandatory for RK3576 and RK3588 SoCs, however the binding does not currently require the use of them.
As a consequence, driver would fail to probe with a hypothetical devicetree that doesn't provide the reg-names for these SoCs, but which is otherwise a perfectly valid DT from the binding perspective.
Update the binding and make reg-names required for the aforementioned SoCs. While this change introduces an ABI break, the expected impact on potential users would be minimal, if any, since the old SoCs are unaffected, while the video decoder support for these newer variants in mainline driver and devicetrees hasn't been released yet.
Moreover, this is also a prerequisite for a subsequent binding update introducing an alternative reg-names order, according to the address-based listing in the vendor's datasheet.
--- Documentation/devicetree/bindings/media/rockchip,vdec.yaml | 2 ++ 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/media/rockchip,vdec.yaml +2 -0
@@ -127,6 +127,8 @@ allOf: minItems: 5 reset-names: minItems: 5 + required: + - reg-names else: properties: reg:
Greg Kroah-Hartman
maintainerPATCH 22/201 media: chips-media: wave5: fix a potential memory leak in wave5_vdi_init()
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Haoxiang Li <[email protected]>
commit 95bd174a453f77b09ea66e1e22834680754ba501 upstream.
Add wave5_vdi_free_dma_memory() in the error path of wave5_vdi_init() to prevent a potential memory leak.
--- drivers/media/platform/chips-media/wave5/wave5-vdi.c | 1 + 1 file changed, 1 insertion(+)
drivers/media/platform/chips-media/wave5/wave5-vdi.c +1 -0
@@ -49,6 +49,7 @@ int wave5_vdi_init(struct device *dev)if (!PRODUCT_CODE_W_SERIES (vpu_dev->product_code)) {WARN_ONCE (1 ,"unsupported product code: 0x%x\n" , vpu_dev->product_code); +wave5_vdi_free_dma_memory (vpu_dev, &vpu_dev->common_mem);return -EOPNOTSUPP ; }
Greg Kroah-Hartman
maintainerPATCH 23/201 media: chips-media: wave5: add missing spinlock protection for send_eos_event()
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ziyi Guo <[email protected]>
commit f48050436746be75227fbc90066a8658cbe94d17 upstream.
Add spin_lock_irqsave()/spin_unlock_irqrestore() around send_eos_event() calls in the VB2 buffer queue and streamoff callbacks to fix the missing lock protection.
wave5_vpu_dec_buf_queue_dst() and streamoff_output() call send_eos_event() without holding inst->state_spinlock. However, send_eos_event() has lockdep_assert_held(&inst->state_spinlock) indicating that callers must hold this lock.
Other callers of send_eos_event() properly acquire the spinlock:
- wave5_vpu_dec_finish_decode() acquires lock at line 431
- wave5_vpu_dec_encoder_cmd() acquires lock at line 821
- wave5_vpu_dec_device_run() acquires lock at line 1592
--- drivers/media/platform/chips-media/wave5/wave5-vpu-dec.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)
drivers/media/platform/chips-media/wave5/wave5-vpu-dec.c +10 -1
@@ -1303,13 +1303,17 @@ static void wave5_vpu_dec_buf_queue_dst(if (vb2_is_streaming (vb->vb2_queue) &&v4l2_m2m_dst_buf_is_last (m2m_ctx)) {unsigned int i; +unsigned long flags;for (i =0 ; i < vb->num_planes; i++)vb2_set_plane_payload (vb, i,0 ); vbuf->field =V4L2_FIELD_NONE ; +spin_lock_irqsave (&inst->state_spinlock, flags);send_eos_event (inst); +spin_unlock_irqrestore (&inst->state_spinlock, flags); +v4l2_m2m_last_buffer_done (m2m_ctx, vbuf); }else {v4l2_m2m_buf_queue (m2m_ctx, vbuf);
@@ -1462,8 +1466,13 @@ static int streamoff_output(struct vb2_q inst->codec_info->dec_info.stream_rd_ptr = new_rd_ptr; inst->codec_info->dec_info.stream_wr_ptr = new_rd_ptr; -if (v4l2_m2m_has_stopped (m2m_ctx)) +if (v4l2_m2m_has_stopped (m2m_ctx)) { +unsigned long flags; + +spin_lock_irqsave (&inst->state_spinlock, flags);send_eos_event (inst); +spin_unlock_irqrestore (&inst->state_spinlock, flags); + }/* streamoff on output cancels any draining operation */ inst->eos = false;
Greg Kroah-Hartman
maintainerPATCH 24/201 media: chips-media: wave5: add missing spinlock protection for handle_dynamic_resolution_change()
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ziyi Guo <[email protected]>
commit cb8bdd3ffca280d014311ab395651d33f58a8708 upstream.
Add spin_lock_irqsave()/spin_unlock_irqrestore() around the handle_dynamic_resolution_change() call in initialize_sequence() to fix the missing lock protection.
initialize_sequence() calls handle_dynamic_resolution_change() without holding inst->state_spinlock. However, handle_dynamic_resolution_change() has lockdep_assert_held(&inst->state_spinlock) indicating that callers must hold this lock.
Other callers of handle_dynamic_resolution_change() properly acquire the spinlock:
- wave5_vpu_dec_finish_decode()
- wave5_vpu_dec_device_run()
--- drivers/media/platform/chips-media/wave5/wave5-vpu-dec.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/media/platform/chips-media/wave5/wave5-vpu-dec.c +3 -0
@@ -1593,6 +1593,7 @@ static int initialize_sequence(struct vp {struct dec_initial_info initial_info;int ret =0 ; +unsigned long flags;memset (&initial_info,0 ,sizeof (struct dec_initial_info ));
@@ -1614,7 +1615,9 @@ static int initialize_sequence(struct vpreturn ret; } +spin_lock_irqsave (&inst->state_spinlock, flags);handle_dynamic_resolution_change (inst); +spin_unlock_irqrestore (&inst->state_spinlock, flags);return 0 ; }
Greg Kroah-Hartman
maintainerPATCH 25/201 arm64: dts: freescale: imx95-toradex-smarc: fix PMIC_SD2_VSEL label position
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Emanuele Ghidoli <[email protected]>
commit 0c9d379d436e119285ef39a4f96b012f576ed74c upstream.
Fix the PMIC_SD2_VSEL gpio-line-name position. It should be on line 19 of gpio3, not line 20.
--- arch/arm64/boot/dts/freescale/imx95-toradex-smarc.dtsi | 1 - 1 file changed, 1 deletion(-)
arch/arm64/boot/dts/freescale/imx95-toradex-smarc.dtsi +0 -1
@@ -262,7 +262,6 @@ &gpio3 { "", "", "", - "", "PMIC_SD2_VSEL"; status = "okay"; };
Signature · 1 line
2.54.0
Greg Kroah-Hartman
maintainerPATCH 26/201 drm/gpusvm: Allow device pages to be mapped in mixed mappings after system pages
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matthew Brost <[email protected]>
commit ec49857ad181f2a68a3bea15422f2936ff366d47 upstream.
The current code rejects device mappings whenever system pages have already been encountered. This is not the intended behavior when allow_mixed is set.
Relax the restriction by permitting a single pagemap to be selected when allow_mixed is enabled, even if system pages were found earlier.
--- drivers/gpu/drm/drm_gpusvm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/drm_gpusvm.c +1 -1
@@ -1495,7 +1495,7 @@ map_pages: } zdd = page->zone_device_data;if (pagemap !=page_pgmap (page)) { -if (i >0 ) { +if (pagemap) { err = -EOPNOTSUPP ; goto err_unmap; }
Greg Kroah-Hartman
maintainerPATCH 27/201 drm/gpusvm: Force unmapping on error in drm_gpusvm_get_pages
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matthew Brost <[email protected]>
commit 556dba95473900073a6c03121361c11f646dc551 upstream.
drm_gpusvm_get_pages() only sets the local flags prior to committing the pages. If an error occurs mid-mapping, has_dma_mapping will be clear, causing the unmap function to skip unmapping pages that were successfully mapped before the error. Fix this by forcibly setting has_dma_mapping in the error path to ensure all previously mapped pages are properly unmapped.
--- drivers/gpu/drm/drm_gpusvm.c | 1 + 1 file changed, 1 insertion(+)
drivers/gpu/drm/drm_gpusvm.c +1 -0
@@ -1572,6 +1572,7 @@ set_seqno:return 0 ; err_unmap: + svm_pages->flags.has_dma_mapping = true;__drm_gpusvm_unmap_pages (gpusvm, svm_pages, num_dma_mapped);drm_gpusvm_notifier_unlock (gpusvm); err_free:
Greg Kroah-Hartman
maintainerPATCH 28/201 spi: bcm63xx: fix controller deregistration
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit c39e65a4e3b8e764efed0b2f5152a1a8547b80fd upstream.
Make sure to deregister the controller before disabling underlying resources like clocks during driver unbind.
--- drivers/spi/spi-bcm63xx.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/spi/spi-bcm63xx.c +7 -1
@@ -602,7 +602,7 @@ static int bcm63xx_spi_probe(struct plat goto out_clk_disable;/* register and we are done */ - ret =devm_spi_register_controller (dev, host); + ret =spi_register_controller (host);if (ret) {dev_err (dev,"spi register failed\n" ); goto out_clk_disable;
@@ -625,11 +625,17 @@ static void bcm63xx_spi_remove(struct plstruct spi_controller *host =platform_get_drvdata (pdev);struct bcm63xx_spi *bs =spi_controller_get_devdata (host); +spi_controller_get (host); + +spi_unregister_controller (host); +/* reset spi block */ bcm_spi_writeb (bs,0 ,SPI_INT_MASK );/* HW shutdown */ clk_disable_unprepare (bs->clk); + +spi_controller_put (host); }static int bcm63xx_spi_suspend (struct device *dev)
Greg Kroah-Hartman
maintainerPATCH 29/201 spi: atmel: fix controller deregistration
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 8d4de97e83520be89d0ff40610ca633b3963a7de upstream.
Make sure to deregister the controller before disabling underlying resources like clocks during driver unbind.
--- drivers/spi/spi-atmel.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/spi/spi-atmel.c +7 -1
@@ -1654,7 +1654,7 @@ static int atmel_spi_probe(struct platfopm_runtime_set_active (&pdev->dev);pm_runtime_enable (&pdev->dev); - ret =devm_spi_register_controller (&pdev->dev, host); + ret =spi_register_controller (host);if (ret) goto out_free_dma;
@@ -1688,8 +1688,12 @@ static void atmel_spi_remove(struct platstruct spi_controller *host =platform_get_drvdata (pdev);struct atmel_spi *as =spi_controller_get_devdata (host); +spi_controller_get (host); +pm_runtime_get_sync (&pdev->dev); +spi_unregister_controller (host); +/* reset the hardware and block queue progress */ if (as->use_dma) {atmel_spi_stop_dma (host);
@@ -1716,6 +1720,8 @@ static void atmel_spi_remove(struct platpm_runtime_put_noidle (&pdev->dev);pm_runtime_disable (&pdev->dev); + +spi_controller_put (host); }static int atmel_spi_runtime_suspend (struct device *dev)
Greg Kroah-Hartman
maintainerPATCH 3/201 HID: appletb-kbd: run inactivity autodim from workqueues
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sangyun Kim <[email protected]>
commit 1654e53349d4e657b331de354313461f401f5063 upstream.
The autodim code in hid-appletb-kbd takes backlight_device->ops_lock via backlight_device_set_brightness() -> mutex_lock() from two different atomic contexts:
* appletb_inactivity_timer() is a struct timer_list callback, so it runs in softirq context. Every expiry triggers
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:591
Call Trace:
<IRQ>
__might_resched
__mutex_lock
backlight_device_set_brightness
appletb_inactivity_timer
call_timer_fn
run_timer_softirq * reset_inactivity_timer() is called from appletb_kbd_hid_event() and appletb_kbd_inp_event(). On real USB hardware these run in softirq/IRQ context (URB completion and input-event dispatch). When the Touch Bar has already been dimmed or turned off, the reset path calls backlight_device_set_brightness() directly to restore brightness, producing the same warning.
Both call sites hit the same mutex_lock()-from-atomic bug. Fix them together by moving the blocking work onto the system workqueue:
* Convert the inactivity timer from struct timer_list to struct delayed_work; the callback (appletb_inactivity_work) now runs in process context where mutex_lock() is legal.
* Add a dedicated struct work_struct restore_brightness_work and have reset_inactivity_timer() schedule it instead of calling backlight_device_set_brightness() directly.
Cancel both works synchronously during driver tear-down alongside the existing backlight reference drop.
The semantics are unchanged (same delays, same state transitions on dim, turn-off and user activity); only the execution context of the sleeping call changes. The timer field and callback are renamed to match their new type; reset_inactivity_timer() keeps its name because it is invoked from input event paths that read naturally as "reset the inactivity timer".
--- drivers/hid/hid-appletb-kbd.c | 44 ++++++++++++++++++++++++++++-------------- 1 file changed, 30 insertions(+), 14 deletions(-)
drivers/hid/hid-appletb-kbd.c +30 -14
@@ -17,7 +17,7 @@#include <linux/module.h> #include <linux/string.h> #include <linux/backlight.h> -#include <linux/timer.h> +#include <linux/workqueue.h> #include <linux/input/sparse-keymap.h> #include "hid-ids.h"
@@ -62,7 +62,8 @@ struct appletb_kbd {struct input_handle kbd_handle;struct input_handle tpd_handle;struct backlight_device *backlight_dev; -struct timer_list inactivity_timer; +struct delayed_work inactivity_work; +struct work_struct restore_brightness_work;bool has_dimmed;bool has_turned_off;u8 saved_mode;
@@ -164,16 +165,18 @@ static int appletb_tb_key_to_slot(unsign } } -static void appletb_inactivity_timer (struct timer_list *t) +static void appletb_inactivity_work (struct work_struct *work) { -struct appletb_kbd *kbd =timer_container_of (kbd, t, inactivity_timer); +struct appletb_kbd *kbd =container_of (to_delayed_work (work), + struct appletb_kbd, + inactivity_work);if (kbd->backlight_dev && appletb_tb_autodim) {if (!kbd->has_dimmed) {backlight_device_set_brightness (kbd->backlight_dev,1 ); kbd->has_dimmed = true; -mod_timer (&kbd->inactivity_timer, - jiffies +secs_to_jiffies (appletb_tb_idle_timeout)); +mod_delayed_work (system_wq, &kbd->inactivity_work, +secs_to_jiffies (appletb_tb_idle_timeout)); }else if (!kbd->has_turned_off) {backlight_device_set_brightness (kbd->backlight_dev,0 ); kbd->has_turned_off = true;
@@ -181,16 +184,25 @@ static void appletb_inactivity_timer(str } } +static void appletb_restore_brightness_work (struct work_struct *work) +{ + struct appletb_kbd *kbd = container_of(work, struct appletb_kbd, + restore_brightness_work); + +if (kbd->backlight_dev) +backlight_device_set_brightness (kbd->backlight_dev,2 ); +} +static void reset_inactivity_timer (struct appletb_kbd *kbd) {if (kbd->backlight_dev && appletb_tb_autodim) {if (kbd->has_dimmed || kbd->has_turned_off) { -backlight_device_set_brightness (kbd->backlight_dev,2 ); kbd->has_dimmed = false; kbd->has_turned_off = false; +schedule_work (&kbd->restore_brightness_work); } -mod_timer (&kbd->inactivity_timer, - jiffies +secs_to_jiffies (appletb_tb_dim_timeout)); +mod_delayed_work (system_wq, &kbd->inactivity_work, +secs_to_jiffies (appletb_tb_dim_timeout)); } }
@@ -408,9 +420,11 @@ static int appletb_kbd_probe(struct hid_dev_err_probe (dev, -ENODEV ,"Failed to get backlight device\n" ); }else {backlight_device_set_brightness (kbd->backlight_dev,2 ); -timer_setup (&kbd->inactivity_timer, appletb_inactivity_timer,0 ); -mod_timer (&kbd->inactivity_timer, - jiffies +secs_to_jiffies (appletb_tb_dim_timeout)); +INIT_DELAYED_WORK (&kbd->inactivity_work, appletb_inactivity_work); +INIT_WORK (&kbd->restore_brightness_work, + appletb_restore_brightness_work); +mod_delayed_work (system_wq, &kbd->inactivity_work, +secs_to_jiffies (appletb_tb_dim_timeout)); } kbd->inp_handler.event = appletb_kbd_inp_event;
@@ -444,7 +458,8 @@ close_hw: stop_hw:hid_hw_stop (hdev);if (kbd->backlight_dev) { -timer_delete_sync (&kbd->inactivity_timer); +cancel_delayed_work_sync (&kbd->inactivity_work); +cancel_work_sync (&kbd->restore_brightness_work);put_device (&kbd->backlight_dev->dev); }return ret;
@@ -461,7 +476,8 @@ static void appletb_kbd_remove(struct hihid_hw_stop (hdev);if (kbd->backlight_dev) { -timer_delete_sync (&kbd->inactivity_timer); +cancel_delayed_work_sync (&kbd->inactivity_work); +cancel_work_sync (&kbd->restore_brightness_work);put_device (&kbd->backlight_dev->dev); } }
Greg Kroah-Hartman
maintainerPATCH 30/201 arm64: dts: lx2160a-cex7/lx2162a-sr-som: fix usd-cd & gpio pinmux
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Josua Mayer <[email protected]>
commit 70008aee892bbb5c2969bbe9e5778fc081b14bd2 upstream.
Commit 8a1365c7bbc1 ("arm64: dts: lx2160a: add pinmux and i2c gpio to support bus recovery") introduced pinmux nodes for lx2160 i2c interfaces, allowing runtime change between i2c and gpio functions implementing bus recovery.
However, the dynamic configuration area (overwrite MUX) used by the pinctrl-single driver initially reads as zero and does not reflect the actual hardware state set by the Reset Configuration Word (RCW) at power-on.
Because multiple groups of pins are configured from a single 32-bit register, the first write from the pinctrl driver unintentionally clears all other bits to zero.
For example, on the LX2162A Clearfog, RCWSR12 is initialized to 0x08000006. When any i2c pinmux is applied, it clears all other fields. This inadvertently disables SD card-detect (IIC2_PMUX) and some GPIOs (SDHC1_DIR_PMUX):
LX2162-CF RCWSR12: 0b0000100000000000 0000000000000110
IIC2_PMUX ||| ||| || | ||| |||XXX : I2C/GPIO/CD-WP SDHC1_DIR_PMUX XXX ||| || | ||| ||| : SDHC/GPIO/SPI
Reverting the commit in question was considered but bus recovery is an important feature.
Instead add pinmux nodes for those pins that were unintentionally reconfigured on SolidRun LX2160A Clearfog-CX and LX2162A Clearfog boards.
--- arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi | 7 +++ arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi | 2 + arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 24 ++++++++++++ arch/arm64/boot/dts/freescale/fsl-lx2162a-clearfog.dts | 2 + arch/arm64/boot/dts/freescale/fsl-lx2162a-sr-som.dtsi | 7 +++ 5 files changed, 42 insertions(+)
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi +7 -0
@@ -162,6 +162,8 @@ }; &fspi { + pinctrl-names = "default"; + pinctrl-0 = <&fspi_data74_pins>, <&fspi_data30_pins>, <&fspi_dqs_sck_cs10_pins>; status = "okay"; flash@0 {
@@ -177,6 +179,11 @@ }; }; +&pinmux_i2crv { + pinctrl-names = "default"; + pinctrl-0 = <&gpio0_14_12_pins>; +}; + &usb0 { status = "okay"; };
arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi +2 -0
@@ -89,6 +89,8 @@ }; &esdhc0 { + pinctrl-names = "default"; + pinctrl-0 = <&esdhc0_cd_wp_pins>, <&esdhc0_cmd_data30_clk_vsel_pins>; sd-uhs-sdr104; sd-uhs-sdr50; sd-uhs-sdr25;
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +24 -0
@@ -1721,6 +1721,10 @@ pinctrl-single,bits = <0x0 0x1 0x7>; }; + esdhc0_cd_wp_pins: iic2-sdhc-pins { + pinctrl-single,bits = <0x0 0x6 0x7>; + }; + i2c2_scl: i2c2-scl-pins { pinctrl-single,bits = <0x0 0 (0x7 << 3)>; };
@@ -1753,6 +1757,26 @@ pinctrl-single,bits = <0x0 (0x1 << 12) (0x7 << 12)>; }; + fspi_data74_pins: xspi1-data74-pins { + pinctrl-single,bits = <0x0 0x0 (0x7 << 15)>; + }; + + fspi_data30_pins: xspi1-data30-pins { + pinctrl-single,bits = <0x0 0x0 (0x7 << 18)>; + }; + + fspi_dqs_sck_cs10_pins: xspi1-base-pins { + pinctrl-single,bits = <0x0 0x0 (0x7 << 21)>; + }; + + esdhc0_cmd_data30_clk_vsel_pins: sdhc1-base-sdhc-vsel-pins { + pinctrl-single,bits = <0x0 0x0 (0x7 << 24)>; + }; + + gpio0_14_12_pins: sdhc1-dir-gpio-pins { + pinctrl-single,bits = <0x0 (0x1 << 27) (0x7 << 27)>; + }; + i2c6_scl: i2c6-scl-pins { pinctrl-single,bits = <0x4 0x2 0x7>; };
arch/arm64/boot/dts/freescale/fsl-lx2162a-clearfog.dts +2 -0
@@ -223,6 +223,8 @@ }; &esdhc0 { + pinctrl-names = "default"; + pinctrl-0 = <&esdhc0_cd_wp_pins>, <&esdhc0_cmd_data30_clk_vsel_pins>; sd-uhs-sdr104; sd-uhs-sdr50; sd-uhs-sdr25;
arch/arm64/boot/dts/freescale/fsl-lx2162a-sr-som.dtsi +7 -0
@@ -30,6 +30,8 @@ }; &fspi { + pinctrl-names = "default"; + pinctrl-0 = <&fspi_data74_pins>, <&fspi_data30_pins>, <&fspi_dqs_sck_cs10_pins>; status = "okay"; flash@0 {
@@ -80,3 +82,8 @@ reg = <0x6f>; }; }; + +&pinmux_i2crv { + pinctrl-names = "default"; + pinctrl-0 = <&gpio0_14_12_pins>; +};
Greg Kroah-Hartman
maintainerPATCH 31/201 staging: media: atomisp: Disallow all private IOCTLs
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sakari Ailus <[email protected]>
commit 2b7eb2c5dc72f0fc954ac4aa155f9e285e937f7c upstream.
Disallow all private IOCTLs. These aren't quite as safe as one could assume of IOCTL handlers; disable them for now. Instead of removing the code, return in the beginning of the function if cmd is non-zero in order to keep static checkers happy.
--- drivers/staging/media/atomisp/pci/atomisp_ioctl.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/staging/media/atomisp/pci/atomisp_ioctl.c +4 -0
@@ -1356,6 +1356,10 @@ static int atomisp_s_parm(struct file *fstatic long atomisp_vidioc_default (struct file *file,void *fh,bool valid_prio,unsigned int cmd,void *arg) { +/* Disable all private IOCTLs for now! */ +if (cmd) +return -EINVAL ; +struct video_device *vdev =video_devdata (file);struct atomisp_sub_device *asd =atomisp_to_video_pipe (vdev)->asd;int err;
Greg Kroah-Hartman
maintainerPATCH 32/201 regulator: mt6357: fix OF node reference imbalance
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 2f38e96c273e15f5e9f5d1fc2c0cbba703751602 upstream.
The driver reuses the OF node of the parent multi-function device but fails to take another reference to balance the one dropped by the platform bus code when unbinding the MFD and deregistering the child devices.
Fix this by using the intended helper for reusing OF nodes.
--- drivers/regulator/mt6357-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/regulator/mt6357-regulator.c +1 -1
@@ -410,7 +410,7 @@ static int mt6357_regulator_probe(structstruct regulator_dev *rdev;int i; - pdev->dev.of_node = pdev->dev.parent->of_node; +device_set_of_node_from_dev (&pdev->dev, pdev->dev.parent);for (i =0 ; i <MT6357_MAX_REGULATOR ; i++) { config.dev = &pdev->dev;
Greg Kroah-Hartman
maintainerPATCH 33/201 spi: st-ssc4: fix controller deregistration
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 19857374010d06ca6a2f7c2c53464122eb804df0 upstream.
Make sure to deregister the controller before disabling underlying resources like clocks during driver unbind.
--- drivers/spi/spi-st-ssc4.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/spi/spi-st-ssc4.c +7 -1
@@ -349,7 +349,7 @@ static int spi_st_probe(struct platform_platform_set_drvdata (pdev, host); - ret =devm_spi_register_controller (&pdev->dev, host); + ret =spi_register_controller (host);if (ret) {dev_err (&pdev->dev,"Failed to register host\n" ); goto rpm_disable;
@@ -371,10 +371,16 @@ static void spi_st_remove(struct platforstruct spi_controller *host =platform_get_drvdata (pdev);struct spi_st *spi_st =spi_controller_get_devdata (host); +spi_controller_get (host); + +spi_unregister_controller (host); +pm_runtime_disable (&pdev->dev);clk_disable_unprepare (spi_st->clk); +spi_controller_put (host); +pinctrl_pm_select_sleep_state (&pdev->dev); }
Greg Kroah-Hartman
maintainerPATCH 34/201 regulator: max77650: fix OF node reference imbalance
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 2edaf5f7ada0ab5c9ec1f0836bd19779a8d85262 upstream.
The driver reuses the OF node of the parent multi-function device but fails to take another reference to balance the one dropped by the platform bus code when unbinding the MFD and deregistering the child devices.
Fix this by using the intended helper for reusing OF nodes.
--- drivers/regulator/max77650-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/regulator/max77650-regulator.c +1 -1
@@ -337,7 +337,7 @@ static int max77650_regulator_probe(stru parent = dev->parent;if (!dev->of_node) - dev->of_node = parent->of_node; +device_set_of_node_from_dev (dev, parent); rdescs =devm_kcalloc (dev,MAX77650_REGULATOR_NUM_REGULATORS ,sizeof (*rdescs),GFP_KERNEL );
Greg Kroah-Hartman
maintainerPATCH 35/201 media: ti: vpe: Add missing v4l2_device_unregister in vip_remove()
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Felix Gu <[email protected]>
commit f3e969a5b54304cab6891a58d9dd8b29072bde4c upstream.
The v4l2_device is registered during probe but was not being unregistered during remove. Add the missing v4l2_device_unregister() call to properly clean up resources.
--- drivers/media/platform/ti/vpe/vip.c | 1 + 1 file changed, 1 insertion(+)
drivers/media/platform/ti/vpe/vip.c +1 -0
@@ -3641,6 +3641,7 @@ static void vip_remove(struct platform_device *pdev) }v4l2_ctrl_handler_free (&shared->ctrl_handler); +v4l2_device_unregister (&shared->v4l2_dev);pm_runtime_put_sync (&pdev->dev);pm_runtime_disable (&pdev->dev);
Signature · 1 line
2.54.0
Greg Kroah-Hartman
maintainerPATCH 36/201 media: rc: xbox_remote: heed DMA restrictions
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Oliver Neukum <[email protected]>
commit e280d1e5e3f2595bbb43fe6e1bce00c59a43c0ff upstream.
The buffer for IO must not be part of the device structure because that violates the DMA coherency rules.
--- drivers/media/rc/xbox_remote.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/media/rc/xbox_remote.c +8 -1
@@ -55,7 +55,7 @@ struct xbox_remote {struct usb_interface *interface;struct urb *irq_urb; -unsigned char inbuf[DATA_BUFSIZE ]__aligned(sizeof(u16)) ; +u8 *inbuf;char rc_name[NAME_BUFSIZE ];char rc_phys[NAME_BUFSIZE ];
@@ -218,6 +218,10 @@ static int xbox_remote_probe(struct usb_if (!xbox_remote || !rc_dev) goto exit_free_dev_rdev; + xbox_remote->inbuf =kzalloc (DATA_BUFSIZE ,GFP_KERNEL ); +if (!xbox_remote->inbuf) + goto exit_free_inbuf; +/* Allocate URB buffer */ xbox_remote->irq_urb =usb_alloc_urb (0 ,GFP_KERNEL );if (!xbox_remote->irq_urb)
@@ -262,6 +266,8 @@ exit_kill_urbs:usb_kill_urb (xbox_remote->irq_urb); exit_free_buffers:usb_free_urb (xbox_remote->irq_urb); +exit_free_inbuf: +kfree (xbox_remote->inbuf); exit_free_dev_rdev:rc_free_device (rc_dev);kfree (xbox_remote);
@@ -286,6 +292,7 @@ static void xbox_remote_disconnect(strucusb_kill_urb (xbox_remote->irq_urb);rc_unregister_device (xbox_remote->rdev);usb_free_urb (xbox_remote->irq_urb); +kfree (xbox_remote->inbuf);kfree (xbox_remote); }
Greg Kroah-Hartman
maintainerPATCH 37/201 media: rc: streamzap: Error handling in probe
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Oliver Neukum <[email protected]>
commit 42844992664f03ef9f930e64f7370fa481e9c267 upstream.
If submitting the URB fails, the device will be unusable. Probe() must fail.
--- drivers/media/rc/streamzap.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)
drivers/media/rc/streamzap.c +8 -4
@@ -219,9 +219,8 @@ static void streamzap_callback(struct urcase -ESHUTDOWN :/* * this urb is terminated, clean up. -* sz might already be invalid at this point */ -dev_err (sz->dev,"urb terminated, status: %d\n" , urb->status); +dev_dbg (sz->dev,"urb terminated, status: %d\n" , urb->status);return ;default :break ;
@@ -358,11 +357,16 @@ static int streamzap_probe(struct usb_inusb_set_intfdata (intf, sz); -if (usb_submit_urb (sz->urb_in,GFP_ATOMIC )) + retval =usb_submit_urb (sz->urb_in,GFP_ATOMIC ); +if (retval <0 ) {dev_err (sz->dev,"urb submit failed\n" ); + goto rc_submit_fail; + }return 0 ; - +rc_submit_fail: +rc_free_device (sz->rdev); +usb_set_intfdata (intf,NULL ); rc_dev_fail:usb_free_urb (sz->urb_in); free_buf_in:
Greg Kroah-Hartman
maintainerPATCH 38/201 media: i2c: ov5647: Fix runtime PM refcount leak in s_ctrl
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xiaolei Wang <[email protected]>
commit f11ae9c04f8368a3b5a0280ef595198dace1c983 upstream.
Three control cases (AUTOGAIN, EXPOSURE_AUTO, ANALOGUE_GAIN) directly return without calling pm_runtime_put(), causing runtime PM reference count leaks.
Change these cases from 'return' to 'ret = ... break' pattern to ensure pm_runtime_put() is always called before function exit.
--- drivers/media/i2c/ov5647.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/media/i2c/ov5647.c +6 -6
@@ -967,21 +967,21 @@ static int ov5647_s_ctrl(struct v4l2_ctrl *ctrl)break ;case V4L2_CID_AUTOGAIN :/* Non-zero turns on AGC by clearing bit 1.*/ -return cci_update_bits (sensor->regmap,OV5647_REG_AEC_AGC ,BIT (1 ), - ctrl->val ?0 :BIT (1 ),NULL ); + ret =cci_update_bits (sensor->regmap,OV5647_REG_AEC_AGC ,BIT (1 ), + ctrl->val ?0 :BIT (1 ),NULL );break ;case V4L2_CID_EXPOSURE_AUTO :/* * Everything except V4L2_EXPOSURE_MANUAL turns on AEC by * clearing bit 0. */ -return cci_update_bits (sensor->regmap,OV5647_REG_AEC_AGC ,BIT (0 ), - ctrl->val ==V4L2_EXPOSURE_MANUAL ?BIT (0 ) :0 ,NULL ); + ret =cci_update_bits (sensor->regmap,OV5647_REG_AEC_AGC ,BIT (0 ), + ctrl->val ==V4L2_EXPOSURE_MANUAL ?BIT (0 ) :0 ,NULL );break ;case V4L2_CID_ANALOGUE_GAIN :/* 10 bits of gain, 2 in the high register. */ -return cci_write (sensor->regmap,OV5647_REG_GAIN , - ctrl->val &0x3ff ,NULL ); + ret =cci_write (sensor->regmap,OV5647_REG_GAIN , + ctrl->val &0x3ff ,NULL );break ;case V4L2_CID_EXPOSURE :/*
Signature · 1 line
2.54.0
Greg Kroah-Hartman
maintainerPATCH 4/201 HID: pass the buffer size to hid_report_raw_event
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Benjamin Tissoires <[email protected]>
commit 2c85c61d1332e1e16f020d76951baf167dcb6f7a upstream.
commit 0a3fe972a7cb ("HID: core: Mitigate potential OOB by removing bogus memset()") enforced the provided data to be at least the size of the declared buffer in the report descriptor to prevent a buffer overflow. However, we can try to be smarter by providing both the buffer size and the data size, meaning that hid_report_raw_event() can make better decision whether we should plaining reject the buffer (buffer overflow attempt) or if we can safely memset it to 0 and pass it to the rest of the stack.
--- drivers/hid/bpf/hid_bpf_dispatch.c | 6 +++-- drivers/hid/hid-core.c | 42 ++++++++++++++++++++++++------------- drivers/hid/hid-gfrm.c | 4 +-- drivers/hid/hid-logitech-hidpp.c | 2 - drivers/hid/hid-multitouch.c | 2 - drivers/hid/hid-primax.c | 2 - drivers/hid/hid-vivaldi-common.c | 2 - drivers/hid/wacom_sys.c | 6 ++--- drivers/staging/greybus/hid.c | 2 - include/linux/hid.h | 4 +-- include/linux/hid_bpf.h | 14 +++++++----- 11 files changed, 53 insertions(+), 33 deletions(-)
drivers/hid/bpf/hid_bpf_dispatch.c +4 -2
@@ -24,7 +24,8 @@ EXPORT_SYMBOL(hid_ops);u8 *dispatch_hid_bpf_device_event (struct hid_device *hdev,enum hid_report_type type,u8 *data, -u32 *size,int interrupt,u64 source,bool from_bpf) +size_t *buf_size,u32 *size,int interrupt,u64 source, +bool from_bpf) {struct hid_bpf_ctx_kern ctx_kern = { .ctx = {
@@ -74,6 +75,7 @@ dispatch_hid_bpf_device_event(struct hid *size = ret; } + *buf_size = ctx_kern.ctx.allocated_size;return ctx_kern.data; }EXPORT_SYMBOL_GPL (dispatch_hid_bpf_device_event);
@@ -505,7 +507,7 @@ __hid_bpf_input_report(struct hid_bpf_ctif (ret)return ret; -return hid_ops->hid_input_report (ctx->hid, type, buf, size,0 , (u64 )(long )ctx, true, +return hid_ops->hid_input_report (ctx->hid, type, buf, size, size,0 , (u64 )(long )ctx, true, lock_already_taken); }
drivers/hid/hid-core.c +28 -14
106 lines not on this page · raw message
drivers/hid/hid-gfrm.c +2 -2
@@ -66,7 +66,7 @@ static int gfrm_raw_event(struct hid_devswitch (data[1 ]) {case GFRM100_SEARCH_KEY_DOWN : ret =hid_report_raw_event (hdev,HID_INPUT_REPORT , search_key_dn, -sizeof (search_key_dn),1 ); +sizeof (search_key_dn),sizeof (search_key_dn),1 );break ;case GFRM100_SEARCH_KEY_AUDIO_DATA :
@@ -74,7 +74,7 @@ static int gfrm_raw_event(struct hid_devcase GFRM100_SEARCH_KEY_UP : ret =hid_report_raw_event (hdev,HID_INPUT_REPORT , search_key_up, -sizeof (search_key_up),1 ); +sizeof (search_key_up),sizeof (search_key_up),1 );break ;default :
drivers/hid/hid-logitech-hidpp.c +1 -1
@@ -3665,7 +3665,7 @@ static int hidpp10_consumer_keys_raw_evememcpy (&consumer_report[1 ], &data[3 ],4 );/* We are called from atomic context */ hid_report_raw_event (hidpp->hid_dev,HID_INPUT_REPORT , - consumer_report,5 ,1 ); + consumer_report,sizeof (consumer_report),5 ,1 );return 1 ; }
drivers/hid/hid-multitouch.c +1 -1
@@ -533,7 +533,7 @@ static void mt_get_feature(struct hid_de } ret =hid_report_raw_event (hdev,HID_FEATURE_REPORT , buf, - size,0 ); + size, size,0 );if (ret)dev_warn (&hdev->dev,"failed to report feature\n" ); }
drivers/hid/hid-primax.c +1 -1
@@ -44,7 +44,7 @@ static int px_raw_event(struct hid_devic data[0 ] |= (1 << (data[idx] -0xE0 )); data[idx] =0 ; } -hid_report_raw_event (hid,HID_INPUT_REPORT , data, size,0 ); +hid_report_raw_event (hid,HID_INPUT_REPORT , data, size, size,0 );return 1 ;default :/* unknown report */
drivers/hid/hid-vivaldi-common.c +1 -1
@@ -85,7 +85,7 @@ void vivaldi_feature_mapping(struct hid_ } ret =hid_report_raw_event (hdev,HID_FEATURE_REPORT , report_data, - report_len,0 ); + report_len, report_len,0 );if (ret) {dev_warn (&hdev->dev,"failed to report feature %d\n" , field->report->id);
drivers/hid/wacom_sys.c +3 -3
@@ -90,7 +90,7 @@ static void wacom_wac_queue_flush(structkfree (buf);continue ; } - err =hid_report_raw_event (hdev,HID_INPUT_REPORT , buf, size, false); + err =hid_report_raw_event (hdev,HID_INPUT_REPORT , buf, size, size, false);if (err) {hid_warn (hdev,"%s: unable to flush event due to error %d\n" , __func__, err);
@@ -334,7 +334,7 @@ static void wacom_feature_mapping(struct data, n, WAC_CMD_RETRIES);if (ret == n && features->type ==HID_GENERIC ) { ret =hid_report_raw_event (hdev, -HID_FEATURE_REPORT , data, n,0 ); +HID_FEATURE_REPORT , data, n, n,0 ); }else if (ret ==2 && features->type !=HID_GENERIC ) { features->touch_max = data[1 ]; }else {
@@ -395,7 +395,7 @@ static void wacom_feature_mapping(struct data, n, WAC_CMD_RETRIES);if (ret == n) { ret =hid_report_raw_event (hdev,HID_FEATURE_REPORT , - data, n,0 ); + data, n, n,0 ); }else {hid_warn (hdev,"%s: could not retrieve sensor offsets\n" , __func__);
drivers/staging/greybus/hid.c +1 -1
@@ -201,7 +201,7 @@ static void gb_hid_init_report(struct gb* we just need to setup the input fields, so using * hid_report_raw_event is safe. */ -hid_report_raw_event (ghid->hid, report->type, ghid->inbuf, size,1 ); +hid_report_raw_event (ghid->hid, report->type, ghid->inbuf, ghid->bufsize, size,1 ); }static void gb_hid_init_reports (struct gb_hid *ghid)
include/linux/hid.h +2 -2
@@ -1266,8 +1266,8 @@ static inline u32 hid_report_len(structreturn DIV_ROUND_UP (report->size,8 ) + (report->id >0 ); } -int hid_report_raw_event (struct hid_device *hid,enum hid_report_type type,u8 *data,u32 size, -int interrupt); +int hid_report_raw_event (struct hid_device *hid,enum hid_report_type type,u8 *data, +size_t bufsize,u32 size,int interrupt);/* HID quirks API */ unsigned long hid_lookup_quirk (const struct hid_device *hdev);
include/linux/hid_bpf.h +9 -5
@@ -72,8 +72,8 @@ struct hid_ops {int (*hid_hw_output_report)(struct hid_device *hdev,__u8 *buf,size_t len,u64 source,bool from_bpf);int (*hid_input_report)(struct hid_device *hid,enum hid_report_type type, -u8 *data,u32 size,int interrupt,u64 source,bool from_bpf, -bool lock_already_taken); +u8 *data,size_t bufsize,u32 size,int interrupt,u64 source, +bool from_bpf,bool lock_already_taken);struct module *owner;const struct bus_type *bus_type; };
@@ -200,7 +200,8 @@ struct hid_bpf {#ifdef CONFIG_HID_BPF u8 *dispatch_hid_bpf_device_event (struct hid_device *hid,enum hid_report_type type,u8 *data, -u32 *size,int interrupt,u64 source,bool from_bpf); +size_t *buf_size,u32 *size,int interrupt,u64 source, +bool from_bpf); int dispatch_hid_bpf_raw_requests(struct hid_device *hdev, unsigned char reportnum, __u8 *buf, u32 size, enum hid_report_type rtype,
@@ -215,8 +216,11 @@ int hid_bpf_device_init(struct hid_devicconst u8 *call_hid_bpf_rdesc_fixup (struct hid_device *hdev,const u8 *rdesc,unsigned int *size);#else /* CONFIG_HID_BPF */ static inline u8 *dispatch_hid_bpf_device_event (struct hid_device *hid,enum hid_report_type type, -u8 *data,u32 *size,int interrupt, -u64 source,bool from_bpf) {return data; } +u8 *data,size_t *buf_size,u32 *size, +int interrupt,u64 source,bool from_bpf) +{ +return data; +} static inline int dispatch_hid_bpf_raw_requests(struct hid_device *hdev, unsigned char reportnum, u8 *buf, u32 size, enum hid_report_type rtype,
Greg Kroah-Hartman
maintainerPATCH 5/201 HID: core: introduce hid_safe_input_report()
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Benjamin Tissoires <[email protected]>
commit 206342541fc887ae919774a43942dc883161fece upstream.
hid_input_report() is used in too many places to have a commit that doesn't cross subsystem borders. Instead of changing the API, introduce a new one when things matters in the transport layers:
- usbhid
- i2chid
This effectively revert to the old behavior for those two transport layers.
--- drivers/hid/hid-core.c | 25 +++++++++++++++++++++++++ drivers/hid/i2c-hid/i2c-hid-core.c | 7 ++++--- drivers/hid/usbhid/hid-core.c | 11 ++++++----- include/linux/hid.h | 2 ++ 4 files changed, 37 insertions(+), 8 deletions(-)
drivers/hid/hid-core.c +25 -0
@@ -2177,6 +2177,7 @@ unlock:* @interrupt: distinguish between interrupt and control transfers * * This is data entry for lower layers. +* Legacy, please use hid_safe_input_report() instead. */ int hid_input_report (struct hid_device *hid,enum hid_report_type type,u8 *data,u32 size,int interrupt)
@@ -2187,6 +2188,30 @@ int hid_input_report(struct hid_device * }EXPORT_SYMBOL_GPL (hid_input_report); +/** +* hid_safe_input_report - report data from lower layer (usb, bt...) +* +* @hid: hid device +* @type: HID report type (HID_*_REPORT) +* @data: report contents +* @bufsize: allocated size of the data buffer +* @size: useful size of data parameter +* @interrupt: distinguish between interrupt and control transfers +* +* This is data entry for lower layers. +* Please use this function instead of the non safe version because we provide +* here the size of the buffer, allowing hid-core to make smarter decisions +* regarding the incoming buffer. +*/ +int hid_safe_input_report (struct hid_device *hid,enum hid_report_type type,u8 *data, +size_t bufsize,u32 size,int interrupt) +{ +return __hid_input_report (hid, type, data, bufsize, size, interrupt,0 , + false,/* from_bpf */ + false/* lock_already_taken */ ); +} +EXPORT_SYMBOL_GPL (hid_safe_input_report); +bool hid_match_one_id (const struct hid_device *hdev,const struct hid_device_id *id) {
drivers/hid/i2c-hid/i2c-hid-core.c +4 -3
@@ -574,9 +574,10 @@ static void i2c_hid_get_input(struct i2cif (ihid->hid->group !=HID_GROUP_RMI )pm_wakeup_event (&ihid->client->dev,0 ); -hid_input_report (ihid->hid,HID_INPUT_REPORT , - ihid->inbuf +sizeof (__le16), - ret_size -sizeof (__le16),1 ); +hid_safe_input_report (ihid->hid,HID_INPUT_REPORT , + ihid->inbuf +sizeof (__le16), + ihid->bufsize -sizeof (__le16), + ret_size -sizeof (__le16),1 ); }return ;
drivers/hid/usbhid/hid-core.c +6 -5
@@ -283,9 +283,9 @@ static void hid_irq_in(struct urb *urb)break ;usbhid_mark_busy (usbhid);if (!test_bit (HID_RESUME_RUNNING , &usbhid->iofl)) { -hid_input_report (urb->context,HID_INPUT_REPORT , - urb->transfer_buffer, - urb->actual_length,1 ); +hid_safe_input_report (urb->context,HID_INPUT_REPORT , + urb->transfer_buffer, urb->transfer_buffer_length, + urb->actual_length,1 );/* * autosuspend refused while keys are pressed * because most keyboards don't wake up when
@@ -482,9 +482,10 @@ static void hid_ctrl(struct urb *urb)switch (status) {case 0 :/* success */ if (usbhid->ctrl[usbhid->ctrltail].dir ==USB_DIR_IN ) -hid_input_report (urb->context, +hid_safe_input_report (urb->context, usbhid->ctrl[usbhid->ctrltail].report->type, - urb->transfer_buffer, urb->actual_length,0 ); + urb->transfer_buffer, urb->transfer_buffer_length, + urb->actual_length,0 );break ;case -ESHUTDOWN :/* unplug */ unplug =1 ;
include/linux/hid.h +2 -0
@@ -998,6 +998,8 @@ struct hid_field *hid_find_field(structint hid_set_field (struct hid_field *,unsigned ,__s32 );int hid_input_report (struct hid_device *hid,enum hid_report_type type,u8 *data,u32 size,int interrupt); +int hid_safe_input_report (struct hid_device *hid,enum hid_report_type type,u8 *data, +size_t bufsize,u32 size,int interrupt);struct hid_field *hidinput_get_led_field (struct hid_device *hid);unsigned int hidinput_count_leds (struct hid_device *hid);__s32 hidinput_calc_abs_res (const struct hid_field *field,__u16 code);
Greg Kroah-Hartman
maintainerPATCH 6/201 HID: pidff: Fix integer overflow in pidff_rescale
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tomasz Pakuła <[email protected]>
commit 48d1677779ad6816978ad4a4f7588aec5ec960fe upstream.
Rescaling values close to the max (U16_MAX) temporarily creates values that exceed the s32 range. This caused value overflow in case when, for example, a periodic effect phase was higer than 180 degrees. In turn, rescale function could return values outised of the logical range of the HID field.
Fix by using 64 bit signed integer to store the value during calculation but still return only 32 bit integer.
--- drivers/hid/usbhid/hid-pidff.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/hid/usbhid/hid-pidff.c +5 -2
@@ -11,6 +11,7 @@#include "hid-pidff.h" #include <linux/hid.h> #include <linux/input.h> +#include <linux/math64.h> #include <linux/minmax.h> #include <linux/slab.h> #include <linux/usb.h>
@@ -325,8 +326,10 @@ static s32 pidff_clamp(s32 i, struct hid*/ static int pidff_rescale (int i,int max,struct hid_field *field) { -return i * (field->logical_maximum - field->logical_minimum) / max + - field->logical_minimum; +/* 64 bits needed for big values during rescale */ +s64 result = field->logical_maximum - field->logical_minimum; + +return div_s64 (result * i, max) + field->logical_minimum; }/*
Greg Kroah-Hartman
maintainerPATCH 7/201 media: uvcvideo: Enable VB2_DMABUF for metadata stream
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ricardo Ribalda <[email protected]>
commit fbac03467e53d8d72e5099c03df26d9adae11416 upstream.
The UVC driver has two video streams, one for the frames and another one for the metadata. Both streams share most of the codebase, but only the data stream declares support for DMABUF transfer mode.
I have tried the DMABUF transfer mode with CONFIG_DMABUF_HEAPS_SYSTEM and the frames looked correct.
This patch announces the support for DMABUF for the metadata stream. This is useful for apps/HALs that only want to support DMABUF.
--- drivers/media/usb/uvc/uvc_queue.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/media/usb/uvc/uvc_queue.c +1 -2
@@ -243,7 +243,7 @@ int uvc_queue_init(struct uvc_video_queuint ret; queue->queue.type = type; - queue->queue.io_modes =VB2_MMAP |VB2_USERPTR ; + queue->queue.io_modes =VB2_MMAP |VB2_USERPTR |VB2_DMABUF ; queue->queue.drv_priv = queue; queue->queue.buf_struct_size =sizeof (struct uvc_buffer ); queue->queue.mem_ops = &vb2_vmalloc_memops;
@@ -256,7 +256,6 @@ int uvc_queue_init(struct uvc_video_queu queue->queue.ops = &uvc_meta_queue_qops;break ;default : - queue->queue.io_modes |=VB2_DMABUF ; queue->queue.ops = &uvc_queue_qops;break ; }
Greg Kroah-Hartman
maintainerPATCH 8/201 drm/msm/hdmi: Fix wrong CTRL1 register used in writing info frames
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krzysztof Kozlowski <[email protected]>
commit 8c6c93b7db42d15c6e8c2540a648d32986a04b1a upstream.
Commit 384d2b03d0a1 ("drm/msm/hdmi: make use of the drm_connector_hdmi framework") changed the unconditional register writes in few places to
updates: read, apply mask, write. The new code reads REG_HDMI_INFOFRAME_CTRL1 register, applies fields/mask for HDMI_INFOFRAME_CTRL0 register and finally writes to HDMI_INFOFRAME_CTRL0. This difference between CTRL1 and CTRL0 looks unintended and may result in wrong data being written to HDMI bridge registers.
Patchwork: https://patchwork.freedesktop.org/patch/711156/
--- drivers/gpu/drm/msm/hdmi/hdmi_bridge.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/msm/hdmi/hdmi_bridge.c +2 -2
@@ -153,7 +153,7 @@ static int msm_hdmi_bridge_write_avi_inffor (i =0 ; i <ARRAY_SIZE (buf); i++)hdmi_write (hdmi,REG_HDMI_AVI_INFO (i), buf[i]); - val =hdmi_read (hdmi,REG_HDMI_INFOFRAME_CTRL1 ); + val =hdmi_read (hdmi,REG_HDMI_INFOFRAME_CTRL0 ); val |=HDMI_INFOFRAME_CTRL0_AVI_SEND |HDMI_INFOFRAME_CTRL0_AVI_CONT ;hdmi_write (hdmi,REG_HDMI_INFOFRAME_CTRL0 , val);
@@ -193,7 +193,7 @@ static int msm_hdmi_bridge_write_audio_i buffer[9 ] <<16 | buffer[10] << 24); - val =hdmi_read (hdmi,REG_HDMI_INFOFRAME_CTRL1 ); + val =hdmi_read (hdmi,REG_HDMI_INFOFRAME_CTRL0 ); val |=HDMI_INFOFRAME_CTRL0_AUDIO_INFO_SEND |HDMI_INFOFRAME_CTRL0_AUDIO_INFO_CONT | HDMI_INFOFRAME_CTRL0_AUDIO_INFO_SOURCE |
Greg Kroah-Hartman
maintainerPATCH 9/201 media: rzv2h-ivc: Avoid double job scheduling
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jacopo Mondi <[email protected]>
commit b1de0940a19c1b0001425f8069d6a82369986af7 upstream.
The scheduling of a new buffer transfer in the IVC driver is triggered by two occurrences of the "frame completed" interrupt.
The first interrupt occurrence identifies when all image data have been transferred to the ISP, the second occurrence identifies when the post-transfer VBLANK has completed and a new buffer can be transferred.
Under heavy system load conditions the actual execution of the workqueue item might be delayed and two items might happen to run concurrently, leading to a new frame transfer being triggered while the previous one has not yet finished.
This error condition is only visible because the driver maintains a status variable that counts the number of interrupts since the last transfer, and warns in case an IRQ happens before the counter has been reset.
To ensure sequential execution of the worqueue items and avoid a double buffer transfer to run concurrently, protect the whole function body with the spinlock that so far was solely used to reset the counter and inspect the interrupt counter variable at the beginning of the buffer transfer function.
As soon as the ongoing transfer completes, the workqueue item will be re-scheduled and will consume the pending buffer.
--- drivers/media/platform/renesas/rzv2h-ivc/rzv2h-ivc-video.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-)
drivers/media/platform/renesas/rzv2h-ivc/rzv2h-ivc-video.c +7 -4
@@ -149,6 +149,11 @@ static void rzv2h_ivc_transfer_buffer(st buffers.work);struct rzv2h_ivc_buf *buf; +guard (spinlock_irqsave)(&ivc->spinlock); + +if (ivc->vvalid_ifp) +return ; +/* Setup buffers */ scoped_guard(spinlock_irqsave, &ivc->buffers.lock) { buf = list_first_entry_or_null(&ivc->buffers.queue,
@@ -164,9 +169,7 @@ static void rzv2h_ivc_transfer_buffer(st buf->addr =vb2_dma_contig_plane_dma_addr (&buf->vb.vb2_buf,0 );rzv2h_ivc_write (ivc,RZV2H_IVC_REG_AXIRX_SADDL_P0 , buf->addr); - scoped_guard(spinlock_irqsave, &ivc->spinlock) { - ivc->vvalid_ifp =2 ; - } + ivc->vvalid_ifp =2 ;rzv2h_ivc_write (ivc,RZV2H_IVC_REG_FM_FRCON ,0x1 ); }
@@ -201,7 +204,7 @@ static void rzv2h_ivc_buf_queue(struct v } scoped_guard(spinlock_irq, &ivc->spinlock) { -if (vb2_is_streaming (vb->vb2_queue) && !ivc->vvalid_ifp) +if (vb2_is_streaming (vb->vb2_queue))queue_work (ivc->buffers.async_wq, &ivc->buffers.work); } }
Greg Kroah-Hartman
maintainercover 7.0.9-rc1 review
This is the start of the stable review cycle for the 7.0.9 release. There are 201 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sun, 17 May 2026 15:46:37 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v7.x/stable-review/patch-7.0.9-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-7.0.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 7.0.9-rc1
Benjamin Cheng <[email protected]>
drm/amdgpu/vcn4: Avoid overflow on msg bound check
Benjamin Cheng <[email protected]>
drm/amdgpu/vcn3: Avoid overflow on msg bound check
Dudu Lu <[email protected]>
vsock/virtio: fix accept queue count leak on transport mismatch
Eric Dumazet <[email protected]>
vsock/virtio: fix potential unbounded skb queue
Stefano Garzarella <[email protected]>
vsock/virtio: fix empty payload in tap skb for non-linear buffers
Stefano Garzarella <[email protected]>
vsock/virtio: fix length and offset in tap skb for split packets
Norbert Szetei <[email protected]>
vsock: fix buffer size clamping order
Lorenzo Stoakes <[email protected]>
mm/vma: do not try to unmap a VMA if mmap_prepare() invoked from mmap()
Markus Mayer <[email protected]>
perf build: fix "argument list too long" in second location
Tejun Heo <[email protected]>
sched_ext: Skip tasks with stale task_rq in bypass_lb_cpu()
Tejun Heo <[email protected]>
cgroup: Defer css percpu_ref kill on rmdir until cgroup is depopulated
Petr Malat <[email protected]>
cgroup: Increment nr_dying_subsys_* from rmdir context
Johan Hovold <[email protected]>
spi: uniphier: fix controller deregistration
Pei Xiao <[email protected]>
spi: uniphier: Simplify clock handling with devm_clk_get_enabled()
Prasanna Kumar T S M <[email protected]>
EDAC/versalnet: Fix device name memory leak
Shubhrajyoti Datta <[email protected]>
EDAC/versalnet: Refactor memory controller initialization and cleanup
Breno Leitao <[email protected]>
kho: fix error handling in kho_add_subtree()
Pavel Begunkov <[email protected]>
io_uring/zcrx: warn on freelist violations
Pavel Begunkov <[email protected]>
io_uring/zcrx: use guards for locking
Amit Sunil Dhamne <[email protected]>
usb: typec: tcpm: reset internal port states on soft reset AMS
Andrea Righi <[email protected]>
sched_ext: Use HK_TYPE_DOMAIN_BOOT to detect isolcpus= domain isolation
Sven Eckelmann <[email protected]>
batman-adv: bla: put backbone reference on failed claim hash insert
Sven Eckelmann <[email protected]>
batman-adv: bla: only purge non-released claims
Sven Eckelmann <[email protected]>
batman-adv: bla: prevent use-after-free when deleting claims
Sven Eckelmann <[email protected]>
batman-adv: tp_meter: fix tp_num leak on kmalloc failure
Jiexun Wang <[email protected]>
batman-adv: stop caching unowned originator pointers in BAT IV
Jiexun Wang <[email protected]>
batman-adv: stop tp_meter sessions during mesh teardown
Jiexun Wang <[email protected]>
batman-adv: reject new tp_meter sessions during teardown
Lyes Bourennani <[email protected]>
batman-adv: fix integer overflow on buff_pos
Ben Morris <[email protected]>
sctp: revalidate list cursor after sctp_sendmsg_to_asoc() in SCTP_SENDALL
Franz Schnyder <[email protected]>
arm64: dts: ti: k3-am69-aquila-dev: Fix DP regulator enable GPIO
Siddharth Vadapalli <[email protected]>
arm64: dts: ti: k3-am62a7-sk: Fix pin name in comment from M19 to N22
Viken Dadhaniya <[email protected]>
arm64: dts: qcom: lemans: Correct QUP interrupt numbers
Krishna Chaitanya Chundru <[email protected]>
arm64: dts: qcom: kodiak: Fix PCIe1 PHY ref clock voting
Alex Deucher <[email protected]>
drm/amdgpu/pm: align Hawaii mclk workaround with radeon
Alex Deucher <[email protected]>
drm/amdgpu/pm: add missing revision check for CI
John B. Moore <[email protected]>
drm/amdgpu/sdma4: replace BUG_ON with WARN_ON in fence emission
Felix Kuehling <[email protected]>
drm/amdkfd: Make all TLB-flushes heavy-weight
Icenowy Zheng <[email protected]>
drm/panel: boe-tv101wum-nl6: restore MODE_LPM after sending disable cmds
Osama Abdelkader <[email protected]>
drm/sti: remove bridge when sti_hda component_add fails
Kory Maincent (TI) <[email protected]>
drm/bridge: tda998x: Use __be32 for audio port OF property pointer
John B. Moore <[email protected]>
drm/amdgpu/gfx9: drop unnecessary 64-bit fence flag check in KIQ
Icenowy Zheng <[email protected]>
drm/panel: himax-hx83102: restore MODE_LPM after sending disable cmds
Sunil Khatri <[email protected]>
drm/amdgpu/userq: fix access to stale wptr mapping
Osama Abdelkader <[email protected]>
drm/exynos: remove bridge when component_add fails
Philip Yang <[email protected]>
drm/amdgpu: zero-initialize GART table on allocation
Alex Deucher <[email protected]>
drm/radeon: add missing revision check for CI
Francis, David <[email protected]>
drm: Set old handle to NULL before prime swap in change_handle
Jia Yao <[email protected]>
drm/xe/uapi: Reject coh_none PAT index for CPU cached memory in madvise
Shuicheng Lin <[email protected]>
drm/xe/bo: Fix bo leak on unaligned size validation in xe_bo_init_locked()
Shuicheng Lin <[email protected]>
drm/xe: Fix dma-buf attachment leak in xe_gem_prime_import()
Shuicheng Lin <[email protected]>
drm/xe/bo: Fix bo leak on GGTT flag validation in xe_bo_init_locked()
Shuicheng Lin <[email protected]>
drm/xe: Fix bo leak in xe_dma_buf_init_obj() on allocation failure
Shixiong Ou <[email protected]>
drm/udl: Increase GET_URB_TIMEOUT
Shubhankar Milind Sardeshpande <[email protected]>
drm/amdgpu: Avoid reset in AMDGPU unload path for APUs with GFX V11 and higher.
Alysa Liu <[email protected]>
drm/amdkfd: validate SVM ioctl nattr against buffer size
Sasha Finkelstein <[email protected]>
drm/appletbdrm: Use kvzalloc for big allocations
Ashutosh Desai <[email protected]>
drm/gem: Fix inconsistent plane dimension calculation in drm_gem_fb_init_with_funcs()
Mario Kleiner <[email protected]>
drm/amd/display: Change dither policy for 10 bpc output back to dithering
Benjamin Cheng <[email protected]>
drm/amdgpu/vcn3: Prevent OOB reads when parsing dec msg
Benjamin Cheng <[email protected]>
drm/amdgpu/vcn4: Prevent OOB reads when parsing dec msg
Benjamin Cheng <[email protected]>
drm/amdgpu/vce: Prevent partial address patches
Benjamin Cheng <[email protected]>
drm/amdgpu/vcn4: Prevent OOB reads when parsing IB
Benjamin Cheng <[email protected]>
drm/amdgpu: Add bounds checking to ib_{get,set}_value
Alysa Liu <[email protected]>
drm/amdkfd: Add upper bound check for num_of_nodes
Yang Wang <[email protected]>
drm/amd/pm: fix incorrect FeatureCtrlMask setting on smu v14.0.x
Chenglei Xie <[email protected]>
drm/amdgpu: gate VM CPU HDP flush on reset lock
Ramalingeswara Reddy, Kanala <[email protected]>
drm/amdgpu: Use SMUIO 15.0.0 offsets for TSC upper and lower count.
Ramalingeswara Reddy, Kanala <[email protected]>
drm/amdgpu: Use NBIF offset for register RCC_STRAP0_RCC_DEV0_EPF0_STRAP0 .
Mario Limonciello <[email protected]>
drm/amd: Add missing firmware declaration for PSP v15.0.0
Wenjing Liu <[email protected]>
drm/amd/display: fix math_mod() using arg1 instead of arg2
Amir Shetaia <[email protected]>
drm/amdkfd: Clear VRAM on allocation to prevent stale data exposure
Jouni Högander <[email protected]>
drm/i915/psr: Init variable to avoid early exit from et alignment loop
Ashutosh Desai <[email protected]>
drm/v3d: Reject empty multisync extension to prevent infinite loop
Anna Maniscalco <[email protected]>
drm/msm: always recover the gpu
Marek Vasut <[email protected]>
drm/imx: parallel-display: Prefer bus format set via legacy "interface-pix-fmt" DT property
Harry Wentland <[email protected]>
drm/colorop: Fix blob property reference tracking in state lifecycle
Yasuaki Torimaru <[email protected]>
drm/msm/gem: fix error handling in msm_ioctl_gem_info_get_metadata()
Johan Hovold <[email protected]>
spi: cadence-quadspi: fix unclocked access on unbind
Johan Hovold <[email protected]>
spi: cadence-quadspi: fix runtime pm and clock imbalance on unbind
Johan Hovold <[email protected]>
spi: cadence-quadspi: fix clock imbalance on probe failure
Johan Hovold <[email protected]>
spi: cadence-quadspi: fix runtime pm disable imbalance on probe failure
Johan Hovold <[email protected]>
spi: cadence: fix clock imbalance on probe failure
Johan Hovold <[email protected]>
spi: cadence: fix unclocked access on unbind
Johan Hovold <[email protected]>
spi: cadence-quadspi: fix controller deregistration
Johan Hovold <[email protected]>
spi: cadence: fix controller deregistration
Johan Hovold <[email protected]>
spi: mpc52xx: fix use-after-free on unbind
Johan Hovold <[email protected]>
spi: mpc52xx: fix controller deregistration
Johan Hovold <[email protected]>
spi: mpc52xx: fix use-after-free on registration failure
Johan Hovold <[email protected]>
spi: orion: fix clock imbalance on registration failure
Johan Hovold <[email protected]>
spi: orion: fix runtime pm leak on unbind
Johan Hovold <[email protected]>
spi: orion: fix controller deregistration
Johan Hovold <[email protected]>
spi: mxic: fix controller deregistration
Johan Hovold <[email protected]>
spi: imx: fix runtime pm leak on probe deferral
Johan Hovold <[email protected]>
spi: octeon: fix controller deregistration
Johan Hovold <[email protected]>
spi: mpfs: fix controller deregistration
Johan Hovold <[email protected]>
spi: img-spfi: fix controller deregistration
Johan Hovold <[email protected]>
spi: slave-mt27xx: fix controller deregistration
Johan Hovold <[email protected]>
spi: sh-msiof: fix controller deregistration
Johan Hovold <[email protected]>
spi: rspi: fix controller deregistration
Johan Hovold <[email protected]>
spi: sprd: fix controller deregistration
Johan Hovold <[email protected]>
spi: pic32-sqi: fix controller deregistration
Johan Hovold <[email protected]>
spi: cavium-thunderx: fix controller deregistration
Johan Hovold <[email protected]>
spi: npcm-pspi: fix controller deregistration
Johan Hovold <[email protected]>
spi: coldfire-qspi: fix controller deregistration
Johan Hovold <[email protected]>
spi: bcmbca-hsspi: fix controller deregistration
Johan Hovold <[email protected]>
spi: fsl: fix controller deregistration
Johan Hovold <[email protected]>
spi: sh-hspi: fix controller deregistration
Johan Hovold <[email protected]>
spi: ch341: fix devres lifetime
Johan Hovold <[email protected]>
spi: pl022: fix controller deregistration
Johan Hovold <[email protected]>
spi: mtk-nor: fix controller deregistration
Johan Hovold <[email protected]>
spi: ep93xx: fix controller deregistration
Johan Hovold <[email protected]>
spi: pic32: fix controller deregistration
Johan Hovold <[email protected]>
spi: omap2-mcspi: fix controller deregistration
Johan Hovold <[email protected]>
spi: fsl-espi: fix controller deregistration
Johan Hovold <[email protected]>
spi: s3c64xx: fix controller deregistration
Johan Hovold <[email protected]>
spi: dln2: fix controller deregistration
Johan Hovold <[email protected]>
spi: mt65xx: fix controller deregistration
Johan Hovold <[email protected]>
spi: mxs: fix controller deregistration
Gustavo Sousa <[email protected]>
drm/xe/hdcp: Add NULL check for media_gt in intel_hdcp_gsc_check_status()
Wenmeng Liu <[email protected]>
media: qcom: camss: Add missing clocks for VFE lite on sa8775p
Vikash Garodia <[email protected]>
media: iris: switch to hardware mode after firmware boot
Vishnu Reddy <[email protected]>
media: iris: fix use-after-free of fmt_src during MBPF check
Thomas Fourier <[email protected]>
media: iris: Fix dma_free_attrs() size in iris_hfi_queues_init()
Arnd Bergmann <[email protected]>
media: venus: fix QCOM_MDT_LOADER dependency
Dmitry Baryshkov <[email protected]>
media: qcom: iris: increase H265D_MAX_SLICE to fix H.265 decoding on SC7280
Wenmeng Liu <[email protected]>
media: qcom: camss: Fix csid IRQ offset for sa8775p
Wenmeng Liu <[email protected]>
media: qcom: camss: Fix csid clock configuration for sa8775p
Dikshita Agarwal <[email protected]>
media: iris: Fix use-after-free in iris_release_internal_buffers()
Arnd Bergmann <[email protected]>
media: iris: fix QCOM_MDT_LOADER dependency
Haoxiang Li <[email protected]>
media: omap3isp: drop the use count of v4l2 pipeline
Matthias Fend <[email protected]>
media: i2c: ov08d10: fix runtime PM handling in probe
Matthias Fend <[email protected]>
media: i2c: ov08d10: fix image vertical start setting
Michael Tretter <[email protected]>
media: staging: imx: request mbus_config in csi_start
Wenmeng Liu <[email protected]>
media: i2c: imx412: Assert reset GPIO during probe
Sergey Shtylyov <[email protected]>
media: dib8000: avoid division by 0 in dib8000_set_dds()
Abdun Nihaal <[email protected]>
media: pci: zoran: fix potential memory leak in zoran_probe()
Gregor Herburger <[email protected]>
arm64: dts: broadcom: bcm2712-d-rpi-5-b: update uart10 interrupt
Gregor Herburger <[email protected]>
arm64: dts: broadcom: bcm2712-d-rpi-5-b: add fixes for pinctrl/pinctrl_aon
Luigi Leonardi <[email protected]>
vsock/virtio: fix MSG_PEEK ignoring skb offset when calculating bytes to copy
Krishna Chomal <[email protected]>
platform/x86: hp-wmi: Ignore backlight and FnLock events
Chaitanya Kumar Borah <[email protected]>
drm/atomic: Add affected colorops with affected planes
Chaitanya Kumar Borah <[email protected]>
drm/colorop: Preserve bypass value in duplicate_state()
Johan Hovold <[email protected]>
spi: aspeed-smc: fix controller deregistration
Johan Hovold <[email protected]>
spi: amlogic-spisg: fix controller deregistration
Wang Jun <[email protected]>
media: saa7164: add ioremap return checks and cleanups
Hans de Goede <[email protected]>
media: ipu-bridge: Add upside-down sensor DMI quirk for Dell XPS 13 9340 and XPS 14 9440
Johan Hovold <[email protected]>
spi: at91-usart: fix controller deregistration
Franz Schnyder <[email protected]>
arm64: dts: ti: k3-am69-aquila-clover: Fix DP regulator enable GPIO
Johan Hovold <[email protected]>
spi: qup: fix controller deregistration
Johan Hovold <[email protected]>
spi: meson-spicc: fix controller deregistration
Johan Hovold <[email protected]>
spi: lantiq-ssc: fix controller deregistration
Johan Hovold <[email protected]>
regulator: bd9571mwv: fix OF node reference imbalance
Johan Hovold <[email protected]>
regulator: s2dos05: fix OF node reference imbalance
Johan Hovold <[email protected]>
regulator: act8945a: fix OF node reference imbalance
Jai Luthra <[email protected]>
media: i2c: imx283: Fix hang when going from large to small resolution
Ethan Tidmore <[email protected]>
media: intel/ipu6: fix error pointer dereference
Jacopo Mondi <[email protected]>
media: mali-c55: Fully reset the ISP configuration
Dang Huynh <[email protected]>
media: rockchip: rkcif: Add missing MUST_CONNECT flag to pads
Janne Grunau <[email protected]>
media: videobuf2: Set vma_flags in vb2_dma_sg_mmap
Johan Hovold <[email protected]>
regulator: rk808: fix OF node reference imbalance
Johan Hovold <[email protected]>
regulator: bq257xx: fix OF node reference imbalance
Jai Luthra <[email protected]>
media: i2c: imx283: Enter full standby when stopping streaming
Xiaolei Wang <[email protected]>
media: i2c: ov5647: Fix runtime PM refcount leak in s_ctrl
Oliver Neukum <[email protected]>
media: rc: streamzap: Error handling in probe
Oliver Neukum <[email protected]>
media: rc: xbox_remote: heed DMA restrictions
Felix Gu <[email protected]>
media: ti: vpe: Add missing v4l2_device_unregister in vip_remove()
Johan Hovold <[email protected]>
regulator: max77650: fix OF node reference imbalance
Johan Hovold <[email protected]>
spi: st-ssc4: fix controller deregistration
Johan Hovold <[email protected]>
regulator: mt6357: fix OF node reference imbalance
Sakari Ailus <[email protected]>
staging: media: atomisp: Disallow all private IOCTLs
Josua Mayer <[email protected]>
arm64: dts: lx2160a-cex7/lx2162a-sr-som: fix usd-cd & gpio pinmux
Johan Hovold <[email protected]>
spi: atmel: fix controller deregistration
Johan Hovold <[email protected]>
spi: bcm63xx: fix controller deregistration
Matthew Brost <[email protected]>
drm/gpusvm: Force unmapping on error in drm_gpusvm_get_pages
Matthew Brost <[email protected]>
drm/gpusvm: Allow device pages to be mapped in mixed mappings after system pages
Emanuele Ghidoli <[email protected]>
arm64: dts: freescale: imx95-toradex-smarc: fix PMIC_SD2_VSEL label position
Ziyi Guo <[email protected]>
media: chips-media: wave5: add missing spinlock protection for handle_dynamic_resolution_change()
Ziyi Guo <[email protected]>
media: chips-media: wave5: add missing spinlock protection for send_eos_event()
Haoxiang Li <[email protected]>
media: chips-media: wave5: fix a potential memory leak in wave5_vdi_init()
Cristian Ciocaltea <[email protected]>
media: dt-bindings: rockchip,vdec: Mark reg-names required for RK35{76,88}Cristian Ciocaltea <[email protected]>
media: dt-bindings: rockchip,vdec: Add alternative reg-names order for RK35{76,88}Alexander Koskovich <[email protected]>
media: i2c: ov8856: free control handler on error in ov8856_init_controls()
Tomi Valkeinen <[email protected]>
media: renesas: vin: Fix RAW8 (again)
Tomi Valkeinen <[email protected]>
media: renesas: vsp1: Fix NULL pointer deref on module unload
Jacopo Mondi <[email protected]>
media: mali-c55: Fix wrong comment of ISP block types
Daniel Scally <[email protected]>
media: mali-c55: Fix Iridix bypass macros
Jacopo Mondi <[email protected]>
media: mali-c55: Initialize the ISP in enable_streams()
Barnabás Pőcze <[email protected]>
media: rzv2h-ivc: Fix concurrent buffer list access
Barnabás Pőcze <[email protected]>
media: rzv2h-ivc: Fix FM_STOP register write
Barnabás Pőcze <[email protected]>
media: rzv2h-ivc: Write AXIRX_PIXFMT once
Guoniu Zhou <[email protected]>
media: nxp: imx8-isi: Reduce minimum queued buffers from 2 to 0
Jacopo Mondi <[email protected]>
media: rzv2h-ivc: Avoid double job scheduling
Krzysztof Kozlowski <[email protected]>
drm/msm/hdmi: Fix wrong CTRL1 register used in writing info frames
Ricardo Ribalda <[email protected]>
media: uvcvideo: Enable VB2_DMABUF for metadata stream
Tomasz Pakuła <[email protected]>
HID: pidff: Fix integer overflow in pidff_rescale
Benjamin Tissoires <[email protected]>
HID: core: introduce hid_safe_input_report()
Benjamin Tissoires <[email protected]>
HID: pass the buffer size to hid_report_raw_event
Sangyun Kim <[email protected]>
HID: appletb-kbd: run inactivity autodim from workqueues
Sangyun Kim <[email protected]>
HID: appletb-kbd: fix UAF in inactivity-timer cleanup path
T.J. Mercier <[email protected]>
HID: playstation: Clamp num_touch_reports
-------------
Diffstat:
.../devicetree/bindings/media/rockchip,vdec.yaml | 22 +- Makefile | 4 +- arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dts | 14 ++ .../arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi | 7 + .../dts/freescale/fsl-lx2160a-clearfog-itx.dtsi | 2 + arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 24 ++ .../boot/dts/freescale/fsl-lx2162a-clearfog.dts | 2 + .../boot/dts/freescale/fsl-lx2162a-sr-som.dtsi | 7 + .../boot/dts/freescale/imx95-toradex-smarc.dtsi | 1 - arch/arm64/boot/dts/qcom/kodiak.dtsi | 2 +- arch/arm64/boot/dts/qcom/lemans.dtsi | 8 +- arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 2 +- arch/arm64/boot/dts/ti/k3-am69-aquila-clover.dts | 2 +- arch/arm64/boot/dts/ti/k3-am69-aquila-dev.dts | 2 +- drivers/edac/versalnet_edac.c | 182 ++++++++------- drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c | 3 +- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 6 +- drivers/gpu/drm/amd/amdgpu/amdgpu_gart.c | 13 +- drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h | 11 +- drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c | 3 + drivers/gpu/drm/amd/amdgpu/amdgpu_vm_cpu.c | 12 +- drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c | 31 ++- drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 3 - drivers/gpu/drm/amd/amdgpu/mes_userqueue.c | 97 ++++---- drivers/gpu/drm/amd/amdgpu/nbif_v6_3_1.c | 9 +- drivers/gpu/drm/amd/amdgpu/psp_v15_0.c | 1 + drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c | 4 +- drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c | 25 ++- drivers/gpu/drm/amd/amdgpu/vcn_v4_0.c | 46 ++-- drivers/gpu/drm/amd/amdkfd/kfd_chardev.c | 33 ++- .../gpu/drm/amd/amdkfd/kfd_device_queue_manager.c | 6 +- drivers/gpu/drm/amd/amdkfd/kfd_priv.h | 10 +- drivers/gpu/drm/amd/amdkfd/kfd_svm.c | 4 +- drivers/gpu/drm/amd/amdkfd/kfd_topology.c | 11 + drivers/gpu/drm/amd/display/dc/core/dc_resource.c | 2 +- .../src/dml2_standalone_libraries/lib_float_math.c | 2 +- .../gpu/drm/amd/pm/powerplay/smumgr/ci_smumgr.c | 13 +- .../gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_2_ppt.c | 10 +- drivers/gpu/drm/bridge/tda998x_drv.c | 2 +- drivers/gpu/drm/drm_atomic.c | 7 + drivers/gpu/drm/drm_colorop.c | 28 ++- drivers/gpu/drm/drm_gem.c | 25 ++- drivers/gpu/drm/drm_gem_framebuffer_helper.c | 4 +- drivers/gpu/drm/drm_gpusvm.c | 3 +- drivers/gpu/drm/exynos/exynos_drm_mic.c | 8 +- drivers/gpu/drm/i915/display/intel_psr.c | 2 +- drivers/gpu/drm/imx/ipuv3/parallel-display.c | 15 +- drivers/gpu/drm/msm/hdmi/hdmi_bridge.c | 4 +- drivers/gpu/drm/msm/msm_drv.c | 7 +- drivers/gpu/drm/msm/msm_gpu.c | 42 ++-- drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c | 2 + drivers/gpu/drm/panel/panel-himax-hx83102.c | 2 + drivers/gpu/drm/radeon/ci_dpm.c | 9 +- drivers/gpu/drm/sti/sti_hda.c | 8 +- drivers/gpu/drm/tiny/appletbdrm.c | 4 +- drivers/gpu/drm/udl/udl_main.c | 3 +- drivers/gpu/drm/udl/udl_modeset.c | 5 +- drivers/gpu/drm/v3d/v3d_submit.c | 5 + drivers/gpu/drm/xe/display/xe_hdcp_gsc.c | 12 +- drivers/gpu/drm/xe/xe_bo.c | 8 +- drivers/gpu/drm/xe/xe_dma_buf.c | 23 +- drivers/gpu/drm/xe/xe_vm_madvise.c | 47 ++++ drivers/hid/bpf/hid_bpf_dispatch.c | 6 +- drivers/hid/hid-appletb-kbd.c | 58 +++-- drivers/hid/hid-core.c | 67 ++++-- drivers/hid/hid-gfrm.c | 4 +- drivers/hid/hid-logitech-hidpp.c | 2 +- drivers/hid/hid-multitouch.c | 2 +- drivers/hid/hid-playstation.c | 6 +- drivers/hid/hid-primax.c | 2 +- drivers/hid/hid-vivaldi-common.c | 2 +- drivers/hid/i2c-hid/i2c-hid-core.c | 7 +- drivers/hid/usbhid/hid-core.c | 11 +- drivers/hid/usbhid/hid-pidff.c | 7 +- drivers/hid/wacom_sys.c | 6 +- drivers/media/common/videobuf2/videobuf2-dma-sg.c | 1 + drivers/media/dvb-frontends/dib8000.c | 4 +- drivers/media/i2c/imx283.c | 15 +- drivers/media/i2c/imx412.c | 2 +- drivers/media/i2c/ov08d10.c | 21 +- drivers/media/i2c/ov5647.c | 12 +- drivers/media/i2c/ov8856.c | 10 +- drivers/media/pci/intel/ipu-bridge.c | 14 ++ drivers/media/pci/intel/ipu6/ipu6.c | 2 +- drivers/media/pci/saa7164/saa7164-core.c | 47 +++- drivers/media/pci/zoran/zoran_card.c | 2 +- .../media/platform/arm/mali-c55/mali-c55-common.h | 2 + .../media/platform/arm/mali-c55/mali-c55-core.c | 35 --- drivers/media/platform/arm/mali-c55/mali-c55-isp.c | 37 +-- .../media/platform/arm/mali-c55/mali-c55-params.c | 128 ++++++++++- .../platform/arm/mali-c55/mali-c55-registers.h | 4 +- .../media/platform/chips-media/wave5/wave5-vdi.c | 1 + .../platform/chips-media/wave5/wave5-vpu-dec.c | 14 +- .../media/platform/nxp/imx8-isi/imx8-isi-video.c | 2 +- .../media/platform/qcom/camss/camss-csid-gen3.c | 6 +- drivers/media/platform/qcom/camss/camss.c | 80 +++---- drivers/media/platform/qcom/iris/Kconfig | 2 +- drivers/media/platform/qcom/iris/iris_buffer.c | 8 +- drivers/media/platform/qcom/iris/iris_core.c | 4 + drivers/media/platform/qcom/iris/iris_hfi_common.c | 4 + drivers/media/platform/qcom/iris/iris_hfi_queue.c | 2 +- drivers/media/platform/qcom/iris/iris_vdec.c | 6 - drivers/media/platform/qcom/iris/iris_vdec.h | 1 - drivers/media/platform/qcom/iris/iris_venc.c | 6 - drivers/media/platform/qcom/iris/iris_venc.h | 1 - drivers/media/platform/qcom/iris/iris_vidc.c | 6 +- drivers/media/platform/qcom/iris/iris_vpu2.c | 1 + drivers/media/platform/qcom/iris/iris_vpu3x.c | 9 +- drivers/media/platform/qcom/iris/iris_vpu4x.c | 24 +- drivers/media/platform/qcom/iris/iris_vpu_buffer.h | 2 +- drivers/media/platform/qcom/iris/iris_vpu_common.c | 16 +- drivers/media/platform/qcom/iris/iris_vpu_common.h | 3 + drivers/media/platform/qcom/venus/Kconfig | 2 +- drivers/media/platform/renesas/rcar-vin/rcar-dma.c | 22 ++ .../media/platform/renesas/rcar-vin/rcar-v4l2.c | 12 + .../platform/renesas/rzv2h-ivc/rzv2h-ivc-video.c | 35 +-- .../media/platform/renesas/rzv2h-ivc/rzv2h-ivc.h | 8 +- drivers/media/platform/renesas/vsp1/vsp1_drv.c | 8 +- .../platform/rockchip/rkcif/rkcif-interface.c | 3 +- .../media/platform/rockchip/rkcif/rkcif-stream.c | 2 +- drivers/media/platform/ti/omap3isp/ispvideo.c | 1 + drivers/media/platform/ti/vpe/vip.c | 1 + drivers/media/rc/streamzap.c | 12 +- drivers/media/rc/xbox_remote.c | 9 +- drivers/media/usb/uvc/uvc_queue.c | 3 +- drivers/platform/x86/hp/hp-wmi.c | 5 + drivers/regulator/act8945a-regulator.c | 3 +- drivers/regulator/bd9571mwv-regulator.c | 3 +- drivers/regulator/bq257xx-regulator.c | 3 +- drivers/regulator/max77650-regulator.c | 2 +- drivers/regulator/mt6357-regulator.c | 2 +- drivers/regulator/rk808-regulator.c | 3 +- drivers/regulator/s2dos05-regulator.c | 2 +- drivers/spi/spi-amlogic-spisg.c | 4 +- drivers/spi/spi-aspeed-smc.c | 9 +- drivers/spi/spi-at91-usart.c | 8 +- drivers/spi/spi-atmel.c | 8 +- drivers/spi/spi-bcm63xx.c | 8 +- drivers/spi/spi-bcmbca-hsspi.c | 4 +- drivers/spi/spi-cadence-quadspi.c | 40 ++-- drivers/spi/spi-cadence.c | 21 +- drivers/spi/spi-cavium-octeon.c | 8 +- drivers/spi/spi-cavium-thunderx.c | 8 +- drivers/spi/spi-ch341.c | 7 +- drivers/spi/spi-coldfire-qspi.c | 10 +- drivers/spi/spi-dln2.c | 8 +- drivers/spi/spi-ep93xx.c | 8 +- drivers/spi/spi-fsl-espi.c | 10 +- drivers/spi/spi-fsl-spi.c | 14 +- drivers/spi/spi-img-spfi.c | 8 +- drivers/spi/spi-imx.c | 1 + drivers/spi/spi-lantiq-ssc.c | 8 +- drivers/spi/spi-meson-spicc.c | 8 +- drivers/spi/spi-mpc52xx.c | 9 +- drivers/spi/spi-mpfs.c | 4 +- drivers/spi/spi-mt65xx.c | 4 +- drivers/spi/spi-mtk-nor.c | 4 +- drivers/spi/spi-mxic.c | 3 +- drivers/spi/spi-mxs.c | 8 +- drivers/spi/spi-npcm-pspi.c | 8 +- drivers/spi/spi-omap2-mcspi.c | 8 +- drivers/spi/spi-orion.c | 16 +- drivers/spi/spi-pic32-sqi.c | 8 +- drivers/spi/spi-pic32.c | 11 +- drivers/spi/spi-pl022.c | 8 +- drivers/spi/spi-qup.c | 8 +- drivers/spi/spi-rspi.c | 10 +- drivers/spi/spi-s3c64xx.c | 4 +- drivers/spi/spi-sh-hspi.c | 10 +- drivers/spi/spi-sh-msiof.c | 10 +- drivers/spi/spi-slave-mt27xx.c | 10 +- drivers/spi/spi-sprd.c | 8 +- drivers/spi/spi-st-ssc4.c | 8 +- drivers/spi/spi-uniphier.c | 24 +- drivers/staging/greybus/hid.c | 2 +- drivers/staging/media/atomisp/pci/atomisp_ioctl.c | 4 + drivers/staging/media/imx/imx-media-csi.c | 40 ++-- drivers/usb/typec/tcpm/tcpm.c | 2 + include/linux/cgroup-defs.h | 4 +- include/linux/hid.h | 6 +- include/linux/hid_bpf.h | 14 +- include/linux/mm.h | 2 +- io_uring/zcrx.c | 17 +- kernel/cgroup/cgroup.c | 248 ++++++++++----------- kernel/liveupdate/kexec_handover.c | 13 +- kernel/sched/ext.c | 12 +- mm/util.c | 51 +++-- mm/vma.c | 3 +- net/batman-adv/bat_iv_ogm.c | 85 ++++--- net/batman-adv/bridge_loop_avoidance.c | 11 +- net/batman-adv/main.c | 1 + net/batman-adv/tp_meter.c | 116 ++++++++-- net/batman-adv/tp_meter.h | 1 + net/batman-adv/types.h | 4 + net/sctp/socket.c | 9 + net/vmw_vsock/af_vsock.c | 6 +- net/vmw_vsock/virtio_transport_common.c | 57 ++--- tools/perf/pmu-events/Build | 4 +- tools/testing/vma/include/dup.h | 41 ++-- tools/testing/vma/include/stubs.h | 3 +- 200 files changed, 1917 insertions(+), 988 deletions(-)
Greg Kroah-Hartman
maintainerPATCH 40/201 regulator: bq257xx: fix OF node reference imbalance
7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 7ea07bc030d8d6395524dec22ff3267441a28c0d upstream.
The driver reuses the OF node of the parent multi-function device but fails to take another reference to balance the one dropped by the platform bus code when unbinding the MFD and deregistering the child devices.
Fix this by using the intended helper for reusing OF nodes.
--- drivers/regulator/bq257xx-regulator.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/regulator/bq257xx-regulator.c +1 -2
@@ -142,8 +142,7 @@ static int bq257xx_regulator_probe(strucstruct device_node *np = dev->of_node;struct regulator_config cfg = {}; - pdev->dev.of_node = pdev->dev.parent->of_node; - pdev->dev.of_node_reused = true; +device_set_of_node_from_dev (&pdev->dev, pdev->dev.parent); pdata =devm_kzalloc (&pdev->dev,sizeof (struct bq257xx_reg_data ),GFP_KERNEL );if (!pdata)
Greg Kroah-Hartman
maintainerPATCH 49/201 regulator: bd9571mwv: fix OF node reference imbalance
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 8498100ee1d00422b8c5b161b3e332278b92a59a upstream.
The driver reuses the OF node of the parent multi-function device but fails to take another reference to balance the one dropped by the platform bus code when unbinding the MFD and deregistering the child devices.
Fix this by using the intended helper for reusing OF nodes.
--- drivers/regulator/bd9571mwv-regulator.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/regulator/bd9571mwv-regulator.c +2 -1
@@ -287,8 +287,9 @@ static int bd9571mwv_regulator_probe(strplatform_set_drvdata (pdev, bdreg); +device_set_of_node_from_dev (&pdev->dev, pdev->dev.parent); + config.dev = &pdev->dev; - config.dev->of_node = pdev->dev.parent->of_node; config.driver_data = bdreg; config.regmap = bdreg->regmap;
Greg Kroah-Hartman
maintainerPATCH 50/201 spi: lantiq-ssc: fix controller deregistration
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit b99206710d032c16b7f8b75e4bc18414d8e4b9f4 upstream.
Make sure to deregister the controller before releasing underlying resources like clocks during driver unbind.
--- drivers/spi/spi-lantiq-ssc.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/spi/spi-lantiq-ssc.c +7 -1
@@ -994,7 +994,7 @@ static int lantiq_ssc_probe(struct platf"Lantiq SSC SPI controller (Rev %i, TXFS %u, RXFS %u, DMA %u)\n" , revision, spi->tx_fifo_size, spi->rx_fifo_size, supports_dma); - err =devm_spi_register_controller (dev, host); + err =spi_register_controller (host);if (err) {dev_err (dev,"failed to register spi host\n" ); goto err_wq_destroy;
@@ -1016,6 +1016,10 @@ static void lantiq_ssc_remove(struct pla {struct lantiq_ssc_spi *spi =platform_get_drvdata (pdev); +spi_controller_get (spi->host); + +spi_unregister_controller (spi->host); +lantiq_ssc_writel (spi,0 ,LTQ_SPI_IRNEN );lantiq_ssc_writel (spi,0 ,LTQ_SPI_CLC );rx_fifo_flush (spi);
@@ -1024,6 +1028,8 @@ static void lantiq_ssc_remove(struct pladestroy_workqueue (spi->wq);clk_put (spi->fpi_clk); + +spi_controller_put (spi->host); }static struct platform_driver lantiq_ssc_driver = {
Greg Kroah-Hartman
maintainerPATCH 51/201 spi: meson-spicc: fix controller deregistration
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 77953c76bec9af4191f8692a10225dd816208718 upstream.
Make sure to deregister the controller before disabling it to allow SPI device drivers to do I/O during deregistration.
--- drivers/spi/spi-meson-spicc.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/spi/spi-meson-spicc.c +7 -1
@@ -1081,7 +1081,7 @@ static int meson_spicc_probe(struct plat } } - ret =devm_spi_register_controller (&pdev->dev, host); + ret =spi_register_controller (host);if (ret) {dev_err (&pdev->dev,"spi registration failed\n" ); goto out_host;
@@ -1099,8 +1099,14 @@ static void meson_spicc_remove(struct pl {struct meson_spicc_device *spicc =platform_get_drvdata (pdev); +spi_controller_get (spicc->host); + +spi_unregister_controller (spicc->host); +/* Disable SPI */ writel (0 , spicc->base +SPICC_CONREG ); + +spi_controller_put (spicc->host); }static const struct meson_spicc_data meson_spicc_gx_data = {
Greg Kroah-Hartman
maintainerPATCH 52/201 spi: qup: fix controller deregistration
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 443e3a0005a4342b218b6dbd4c6387d3c7fed85a upstream.
Make sure to deregister the controller before disabling underlying resources like clocks during driver unbind.
--- drivers/spi/spi-qup.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/spi/spi-qup.c +7 -1
@@ -1193,7 +1193,7 @@ static int spi_qup_probe(struct platformpm_runtime_set_active (dev);pm_runtime_enable (dev); - ret =devm_spi_register_controller (dev, host); + ret =spi_register_controller (host);if (ret) goto disable_pm;
@@ -1320,6 +1320,10 @@ static void spi_qup_remove(struct platfostruct spi_qup *controller =spi_controller_get_devdata (host);int ret; +spi_controller_get (host); + +spi_unregister_controller (host); + ret =pm_runtime_get_sync (&pdev->dev);if (ret >=0 ) {
@@ -1339,6 +1343,8 @@ static void spi_qup_remove(struct platfopm_runtime_put_noidle (&pdev->dev);pm_runtime_disable (&pdev->dev); + +spi_controller_put (host); }static const struct of_device_id spi_qup_dt_match[] = {
Greg Kroah-Hartman
maintainerPATCH 53/201 arm64: dts: ti: k3-am69-aquila-clover: Fix DP regulator enable GPIO
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Franz Schnyder <[email protected]>
commit 8cfb2e517113543e0de9e8df5754d5e09cb3627e upstream.
Correct the DP regulator enable GPIO to index 21.
The 3.3V DP regulator was not being enabled by the assigned GPIO, as it is routed to GPIO index 21 and not 37, which was causing instability with displays connected over DP or via an active DP-to-HDMI adapter.
--- arch/arm64/boot/dts/ti/k3-am69-aquila-clover.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/ti/k3-am69-aquila-clover.dts +1 -1
@@ -26,7 +26,7 @@ reg_3v3_dp: regulator-3v3-dp { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_21_dp>; /* Aquila GPIO_21_DP (AQUILA B57) */ - gpio = <&main_gpio0 37 GPIO_ACTIVE_HIGH>; + gpio = <&main_gpio0 21 GPIO_ACTIVE_HIGH>; enable-active-high; regulator-max-microvolt = <3300000>; regulator-min-microvolt = <3300000>;
Signature · 1 line
2.54.0
Greg Kroah-Hartman
maintainerPATCH 54/201 spi: at91-usart: fix controller deregistration
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 9acecc9bcff058eaef40fd7a4c3650e88b06b220 upstream.
Make sure to deregister the controller before disabling and releasing underlying resources like clocks and DMA during driver unbind.
--- drivers/spi/spi-at91-usart.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/spi/spi-at91-usart.c +7 -1
@@ -556,7 +556,7 @@ static int at91_usart_spi_probe(struct pspin_lock_init (&aus->lock);init_completion (&aus->xfer_completion); - ret =devm_spi_register_controller (&pdev->dev, controller); + ret =spi_register_controller (controller);if (ret) goto at91_usart_fail_register_controller;
@@ -634,8 +634,14 @@ static void at91_usart_spi_remove(structstruct spi_controller *ctlr =platform_get_drvdata (pdev);struct at91_usart_spi *aus =spi_controller_get_devdata (ctlr); +spi_controller_get (ctlr); + +spi_unregister_controller (ctlr); +at91_usart_spi_release_dma (ctlr);clk_disable_unprepare (aus->clk); + +spi_controller_put (ctlr); }static const struct dev_pm_ops at91_usart_spi_pm_ops = {
Greg Kroah-Hartman
maintainerPATCH 55/201 media: ipu-bridge: Add upside-down sensor DMI quirk for Dell XPS 13 9340 and XPS 14 9440
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans de Goede <[email protected]>
commit 2c10400e4a233200046d023ab2377bc56fd48dea upstream.
The Dell XPS 13 9340 and XPS 14 9440 have an upside-down mounted OV02C10 sensor, just like the XPS 13 9350 and XPS 16 9640 models.
Extend the existing DMI matches for handling these laptops with DMI matches for these 2 models
--- drivers/media/pci/intel/ipu-bridge.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
drivers/media/pci/intel/ipu-bridge.c +14 -0
@@ -107,10 +107,24 @@ static const struct dmi_system_id upside { .matches = {DMI_EXACT_MATCH (DMI_SYS_VENDOR ,"Dell Inc." ), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "XPS 13 9340"), + }, + .driver_data = "OVTI02C1", + }, + { + .matches = { +DMI_EXACT_MATCH (DMI_SYS_VENDOR ,"Dell Inc." ), DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "XPS 13 9350"), }, .driver_data = "OVTI02C1", }, + { + .matches = { +DMI_EXACT_MATCH (DMI_SYS_VENDOR ,"Dell Inc." ), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "XPS 14 9440"), + }, + .driver_data = "OVTI02C1", + }, { .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
Greg Kroah-Hartman
maintainerPATCH 56/201 media: saa7164: add ioremap return checks and cleanups
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wang Jun <[email protected]>
commit d51c60a498e83c9a79884c8e420f97e3885c9583 upstream.
Add checks for ioremap return values in saa7164_dev_setup(). If ioremap for BAR0 or BAR2 fails, release the already allocated PCI memory regions, remove the device from the global list, decrement the device count, and return -ENODEV.
This prevents potential null pointer dereferences and ensures proper cleanup on memory mapping failures.
--- drivers/media/pci/saa7164/saa7164-core.c | 47 +++++++++++++++++++++++-------- 1 file changed, 35 insertions(+), 12 deletions(-)
drivers/media/pci/saa7164/saa7164-core.c +35 -12
@@ -888,6 +888,15 @@ static int get_resources(struct saa7164_return -EBUSY ; } +static void release_resources (struct saa7164_dev *dev) +{ +release_mem_region (pci_resource_start (dev->pci,0 ), +pci_resource_len (dev->pci,0 )); + +release_mem_region (pci_resource_start (dev->pci,2 ), +pci_resource_len (dev->pci,2 )); +} +static int saa7164_port_init (struct saa7164_dev *dev,int portnr) {struct saa7164_port *port =NULL ;
@@ -947,9 +956,9 @@ static int saa7164_dev_setup(struct saa7snprintf (dev->name,sizeof (dev->name),"saa7164[%d]" , dev->nr); -mutex_lock (&devlist); -list_add_tail (&dev->devlist, &saa7164_devlist); -mutex_unlock (&devlist); + scoped_guard(mutex, &devlist) { +list_add_tail (&dev->devlist, &saa7164_devlist); + }/* board config */ dev->board =UNSET ;
@@ -996,11 +1005,17 @@ static int saa7164_dev_setup(struct saa7 }/* PCI/e allocations */ - dev->lmmio =ioremap (pci_resource_start (dev->pci,0 ), -pci_resource_len (dev->pci,0 )); + dev->lmmio =pci_ioremap_bar (dev->pci,0 ); +if (!dev->lmmio) { +dev_err (&dev->pci->dev,"Failed to remap MMIO BAR 0\n" ); + goto err_ioremap_bar0; + } - dev->lmmio2 =ioremap (pci_resource_start (dev->pci,2 ), -pci_resource_len (dev->pci,2 )); + dev->lmmio2 =pci_ioremap_bar (dev->pci,2 ); +if (!dev->lmmio2) { +dev_err (&dev->pci->dev,"Failed to remap MMIO BAR 2\n" ); + goto err_ioremap_bar2; + } dev->bmmio = (u8 __iomem *)dev->lmmio; dev->bmmio2 = (u8 __iomem *)dev->lmmio2;
@@ -1019,17 +1034,25 @@ static int saa7164_dev_setup(struct saa7saa7164_pci_quirks (dev);return 0 ; + +err_ioremap_bar2: +iounmap (dev->lmmio); +err_ioremap_bar0: +release_resources (dev); + + scoped_guard(mutex, &devlist) { +list_del (&dev->devlist); + } + saa7164_devcount--; + +return -ENODEV ; }static void saa7164_dev_unregister (struct saa7164_dev *dev) {dprintk (1 ,"%s()\n" , __func__); -release_mem_region (pci_resource_start (dev->pci,0 ), -pci_resource_len (dev->pci,0 )); - -release_mem_region (pci_resource_start (dev->pci,2 ), -pci_resource_len (dev->pci,2 )); +release_resources (dev);if (!atomic_dec_and_test (&dev->refcount))return ;
Greg Kroah-Hartman
maintainerPATCH 57/201 spi: amlogic-spisg: fix controller deregistration
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 84d31bb1f6256eea0db6cf64a3c7a53145f92bb9 upstream.
Make sure to deregister the controller before disabling underlying resources like clocks during driver unbind.
--- drivers/spi/spi-amlogic-spisg.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/spi/spi-amlogic-spisg.c +3 -1
@@ -800,7 +800,7 @@ static int aml_spisg_probe(struct platfo goto out_clk; } - ret =devm_spi_register_controller (dev, ctlr); + ret =spi_register_controller (ctlr);if (ret) {dev_err (&pdev->dev,"spi controller registration failed\n" ); goto out_clk;
@@ -823,6 +823,8 @@ static void aml_spisg_remove(struct plat {struct spisg_device *spisg =platform_get_drvdata (pdev); +spi_unregister_controller (spisg->controller); +if (!pm_runtime_suspended (&pdev->dev)) {pinctrl_pm_select_sleep_state (&spisg->pdev->dev);clk_disable_unprepare (spisg->core);
Greg Kroah-Hartman
maintainerPATCH 58/201 spi: aspeed-smc: fix controller deregistration
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 1044e5a4ccd57bf5a64f90100a321b498e0267a2 upstream.
Make sure to deregister the controller before disabling it to allow SPI device drivers to do I/O during deregistration.
--- drivers/spi/spi-aspeed-smc.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/spi/spi-aspeed-smc.c +6 -3
@@ -972,7 +972,7 @@ static int aspeed_spi_probe(struct platfreturn -ENOMEM ; aspi =spi_controller_get_devdata (ctlr); -platform_set_drvdata (pdev, aspi); +platform_set_drvdata (pdev, ctlr); aspi->data = data; aspi->dev = dev;
@@ -1021,7 +1021,7 @@ static int aspeed_spi_probe(struct platfreturn ret; } - ret =devm_spi_register_controller (dev, ctlr); + ret =spi_register_controller (ctlr);if (ret)dev_err (&pdev->dev,"spi_register_controller failed\n" );
@@ -1030,7 +1030,10 @@ static int aspeed_spi_probe(struct platfstatic void aspeed_spi_remove (struct platform_device *pdev) { -struct aspeed_spi *aspi =platform_get_drvdata (pdev); +struct spi_controller *ctlr =platform_get_drvdata (pdev); +struct aspeed_spi *aspi =spi_controller_get_devdata (ctlr); + +spi_unregister_controller (ctlr);aspeed_spi_enable (aspi, false); }
Greg Kroah-Hartman
maintainerPATCH 41/201 regulator: rk808: fix OF node reference imbalance
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 65290b24d8a5f0b8cd065201e653db824c4a4da6 upstream.
The driver reuses the OF node of the parent multi-function device but fails to take another reference to balance the one dropped by the platform bus code when unbinding the MFD and deregistering the child devices.
Fix this by using the intended helper for reusing OF nodes.
--- drivers/regulator/rk808-regulator.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/regulator/rk808-regulator.c +1 -2
@@ -2114,8 +2114,7 @@ static int rk808_regulator_probe(structstruct regmap *regmap;int ret, i, nregulators; - pdev->dev.of_node = pdev->dev.parent->of_node; - pdev->dev.of_node_reused = true; +device_set_of_node_from_dev (&pdev->dev, pdev->dev.parent); regmap =dev_get_regmap (pdev->dev.parent,NULL );if (!regmap)
Greg Kroah-Hartman
maintainerPATCH 59/201 drm/colorop: Preserve bypass value in duplicate_state()
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chaitanya Kumar Borah <[email protected]>
commit 0d9710aeb6959ae244f255986187562fa50504b9 upstream.
__drm_atomic_helper_colorop_duplicate_state() unconditionally sets state->bypass = true after copying the existing state.
This override causes the new atomic state to no longer reflect the currently committed hardware state. Since the bypass property directly controls whether the colorop is active in hardware, resetting it to true can inadvertently disable an active colorop during a subsequent commit, particularly for internal driver commits where userspace does not touch the property.
Drop the unconditional assignment and preserve the duplicated bypass value.
--- drivers/gpu/drm/drm_colorop.c | 2 -- 1 file changed, 2 deletions(-)
drivers/gpu/drm/drm_colorop.c +0 -2
@@ -441,8 +441,6 @@ static void __drm_atomic_helper_colorop_if (state->data)drm_property_blob_get (state->data); - - state->bypass = true; } struct drm_colorop_state *
Greg Kroah-Hartman
maintainerPATCH 60/201 drm/atomic: Add affected colorops with affected planes
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chaitanya Kumar Borah <[email protected]>
commit 6955d6bca0531ffbbaeecac844b7bae84345b3fb upstream.
When drm_atomic_add_affected_planes() adds a plane to the atomic state, the associated colorops are not guaranteed to be included. This can leave colorop state out of the transaction when planes are pulled in implicitly (eg. during modeset or internal commits).
Also add affected colorops when adding affected planes to keep plane and color pipeline state consistent within the atomic transaction.
v2: Add affected colorops only when a pipeline is enabled
--- drivers/gpu/drm/drm_atomic.c | 7 +++++++ 1 file changed, 7 insertions(+)
drivers/gpu/drm/drm_atomic.c +7 -0
@@ -1569,6 +1569,7 @@ drm_atomic_add_affected_planes(struct drconst struct drm_crtc_state *old_crtc_state =drm_atomic_get_old_crtc_state (state, crtc);struct drm_plane *plane; +int ret;WARN_ON (!drm_atomic_get_new_crtc_state (state, crtc));
@@ -1582,6 +1583,12 @@ drm_atomic_add_affected_planes(struct drif (IS_ERR (plane_state))return PTR_ERR (plane_state); + +if (plane_state->color_pipeline) { + ret =drm_atomic_add_affected_colorops (state, plane); +if (ret) +return ret; + } }return 0 ; }
Greg Kroah-Hartman
maintainerPATCH 61/201 platform/x86: hp-wmi: Ignore backlight and FnLock events
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krishna Chomal <[email protected]>
commit e8c597368b8500a824c639bfb5ed0044068c6870 upstream.
On HP OmniBook 7 the keyboard backlight and FnLock keys are handled directly by the firmware. However, they still trigger WMI events which results in "Unknown key code" warnings in dmesg.
Add these key codes to the keymap with KE_IGNORE to silence the warnings since no software action is needed.
--- drivers/platform/x86/hp/hp-wmi.c | 5 +++++ 1 file changed, 5 insertions(+)
drivers/platform/x86/hp/hp-wmi.c +5 -0
@@ -399,6 +399,11 @@ static const struct key_entry hp_wmi_key { KE_KEY, 0x21a9, { KEY_TOUCHPAD_OFF } }, { KE_KEY, 0x121a9, { KEY_TOUCHPAD_ON } }, { KE_KEY, 0x231b, { KEY_HELP } }, + { KE_IGNORE, 0x21ab, }, /* FnLock on */ + { KE_IGNORE, 0x121ab, }, /* FnLock off */ + { KE_IGNORE, 0x30021aa, }, /* kbd backlight: level 2 -> off */ + { KE_IGNORE, 0x33221aa, }, /* kbd backlight: off -> level 1 */ + { KE_IGNORE, 0x36421aa, }, /* kbd backlight: level 1 -> level 2*/ { KE_END, 0 } };
Greg Kroah-Hartman
maintainerPATCH 62/201 vsock/virtio: fix MSG_PEEK ignoring skb offset when calculating bytes to copy
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Luigi Leonardi <[email protected]>
commit 080f22f5d30233faf3d83be3098f35b8be9b7a00 upstream.
virtio_transport_stream_do_peek() does not account for the skb offset when computing the number of bytes to copy.
This means that, after a partial recv() that advances the offset, a peek requesting more bytes than are available in the sk_buff causes skb_copy_datagram_iter() to go past the valid payload, resulting in a -EFAULT.
The dequeue path already handles this correctly.
Apply the same logic to the peek path.
--- net/vmw_vsock/virtio_transport_common.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
net/vmw_vsock/virtio_transport_common.c +2 -3
@@ -547,9 +547,8 @@ virtio_transport_stream_do_peek(struct v skb_queue_walk(&vvs->rx_queue, skb) {size_t bytes; - bytes = len - total; -if (bytes > skb->len) - bytes = skb->len; + bytes =min_t (size_t, len - total, + skb->len -VIRTIO_VSOCK_SKB_CB (skb)->offset);spin_unlock_bh (&vvs->rx_lock);
Greg Kroah-Hartman
maintainerPATCH 63/201 arm64: dts: broadcom: bcm2712-d-rpi-5-b: add fixes for pinctrl/pinctrl_aon
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gregor Herburger <[email protected]>
commit aeb078cebc40d421f61a8f07b0e7919aeb44d751 upstream.
On the -d revision of the bcm2712 the pinctrl differs from the c0 revision. The driver already supports both and distinguishes the two with the compatible string.
Update the compatible string and reg length to reflect the different pinctrl.
--- arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dts | 10 ++++++++++ 1 file changed, 10 insertions(+)
arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dts +10 -0
@@ -35,3 +35,13 @@ "PMIC_SCL", // AON_SGPIO_04 "PMIC_SDA"; // AON_SGPIO_05 }; + +&pinctrl { + compatible = "brcm,bcm2712d0-pinctrl"; + reg = <0x7d504100 0x20>; +}; + +&pinctrl_aon { + compatible = "brcm,bcm2712d0-aon-pinctrl"; + reg = <0x7d510700 0x1c>; +};
Greg Kroah-Hartman
maintainerPATCH 64/201 arm64: dts: broadcom: bcm2712-d-rpi-5-b: update uart10 interrupt
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gregor Herburger <[email protected]>
commit 18d4a06e10051681de074a9250e54afc1f3ee312 upstream.
On the -d revision of bcm2712 the uart interrupt is on 120. Update it accordingly.
--- arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dts | 4 ++++ 1 file changed, 4 insertions(+)
arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dts +4 -0
@@ -45,3 +45,7 @@ compatible = "brcm,bcm2712d0-aon-pinctrl"; reg = <0x7d510700 0x1c>; }; + +&uart10 { + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; +};
Greg Kroah-Hartman
maintainerPATCH 65/201 media: pci: zoran: fix potential memory leak in zoran_probe()
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Abdun Nihaal <[email protected]>
commit 8ea21435fe36fb853706f4935d78bc11beb63fb4 upstream.
The memory allocated for codec in videocodec_attach() is not freed in one of the error paths, due to an incorrect goto label. Fix the label to free it on error.
--- drivers/media/pci/zoran/zoran_card.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/media/pci/zoran/zoran_card.c +1 -1
@@ -1373,7 +1373,7 @@ static int zoran_probe(struct pci_dev *p }if (zr->codec->type != zr->card.video_codec) {pci_err (pdev,"%s - wrong codec\n" , __func__); - goto zr_unreg_videocodec; + goto zr_detach_codec; } }if (zr->card.video_vfe !=0 ) {
Greg Kroah-Hartman
maintainerPATCH 66/201 media: dib8000: avoid division by 0 in dib8000_set_dds()
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sergey Shtylyov <[email protected]>
commit dde3c37af95cd6fa301c4906f33d627bc9dd874c upstream.
In dib8000_set_dds(), 1 << 26 (67108864) divided by e.g. 1 apparently can't fit into 16-bit variable unit_khz_dds_val, being truncated to 0; this will cause division by 0 while calling dprintk() with debugging enabled (via the module parameter). Use s32 instead of s16 to declare the variable, getting rid of the cast to u16 in the *else* branch as well...
Found by Linux Verification Center (linuxtesting.org) with the Svace static analysis tool.
--- drivers/media/dvb-frontends/dib8000.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/media/dvb-frontends/dib8000.c +2 -2
@@ -2695,7 +2695,7 @@ static void dib8000_viterbi_state(structstatic void dib8000_set_dds (struct dib8000_state *state,s32 offset_khz) { -s16 unit_khz_dds_val; +s32 unit_khz_dds_val;u32 abs_offset_khz =abs (offset_khz);u32 dds = state->cfg.pll->ifreq &0x1ffffff ;u8 invert = !!(state->cfg.pll->ifreq & (1 <<25 ));
@@ -2716,7 +2716,7 @@ static void dib8000_set_dds(struct dib80 dds = (1 <<26 ) - dds; }else { ratio =2 ; - unit_khz_dds_val = (u16) (67108864 / state->cfg.pll->internal); + unit_khz_dds_val =67108864 / state->cfg.pll->internal;if (offset_khz <0 ) unit_khz_dds_val *=-1 ;
Greg Kroah-Hartman
maintainerPATCH 67/201 media: i2c: imx412: Assert reset GPIO during probe
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wenmeng Liu <[email protected]>
commit 8467c5ff5acae28513bc1e0af535e06b41b04344 upstream.
Assert the reset GPIO before first power up. This avoids a mismatch where the first power up (when the reset GPIO defaults deasserted) differs from subsequent cycles.
--- drivers/media/i2c/imx412.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/media/i2c/imx412.c +1 -1
@@ -925,7 +925,7 @@ static int imx412_parse_hw_config(struct/* Request optional reset pin */ imx412->reset_gpio =devm_gpiod_get_optional (imx412->dev,"reset" , -GPIOD_OUT_LOW ); +GPIOD_OUT_HIGH );if (IS_ERR (imx412->reset_gpio)) {dev_err (imx412->dev,"failed to get reset gpio %pe\n" , imx412->reset_gpio);
Greg Kroah-Hartman
maintainerPATCH 68/201 media: staging: imx: request mbus_config in csi_start
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Tretter <[email protected]>
commit 9df2aaa64890c0b6226057eb6fcb6352bd2df432 upstream.
Request the upstream mbus_config in csi_start, which starts the stream, instead of caching it in link_validate.
This allows to get rid of the mbus_cfg field in the struct csi_priv and avoids state in the driver.
--- drivers/staging/media/imx/imx-media-csi.c | 40 ++++++++++++++++++------------ 1 file changed, 24 insertions(+), 16 deletions(-)
drivers/staging/media/imx/imx-media-csi.c +24 -16
@@ -97,9 +97,6 @@ struct csi_priv {/* the mipi virtual channel number at link validate */ int vc_num; -/* media bus config of the upstream subdevice CSI is receiving from */ -struct v4l2_mbus_config mbus_cfg; -spinlock_t irqlock;/* protect eof_irq handler */ struct timer_list eof_timeout_timer;int eof_irq;
@@ -403,7 +400,8 @@ static void csi_idmac_unsetup_vb2_buf(st }/* init the SMFC IDMAC channel */ -static int csi_idmac_setup_channel (struct csi_priv *priv) +static int csi_idmac_setup_channel (struct csi_priv *priv, +struct v4l2_mbus_config *mbus_cfg) {struct imx_media_video_dev *vdev = priv->vdev;const struct imx_media_pixfmt *incc;
@@ -432,7 +430,7 @@ static int csi_idmac_setup_channel(struc image.phys0 = phys[0 ]; image.phys1 = phys[1 ]; - passthrough =requires_passthrough (&priv->mbus_cfg, infmt, incc); + passthrough =requires_passthrough (mbus_cfg, infmt, incc); passthrough_cycles =1 ;/*
@@ -572,11 +570,12 @@ static void csi_idmac_unsetup(struct csicsi_idmac_unsetup_vb2_buf (priv, state); } -static int csi_idmac_setup (struct csi_priv *priv) +static int csi_idmac_setup (struct csi_priv *priv, +struct v4l2_mbus_config *mbus_cfg) {int ret; - ret =csi_idmac_setup_channel (priv); + ret =csi_idmac_setup_channel (priv, mbus_cfg);if (ret)return ret;
@@ -595,7 +594,8 @@ static int csi_idmac_setup(struct csi_prreturn 0 ; } -static int csi_idmac_start (struct csi_priv *priv) +static int csi_idmac_start (struct csi_priv *priv, +struct v4l2_mbus_config *mbus_cfg) {struct imx_media_video_dev *vdev = priv->vdev;int ret;
@@ -619,7 +619,7 @@ static int csi_idmac_start(struct csi_pr priv->last_eof = false; priv->nfb4eof = false; - ret =csi_idmac_setup (priv); + ret =csi_idmac_setup (priv, mbus_cfg);if (ret) {v4l2_err (&priv->sd,"csi_idmac_setup failed: %d\n" , ret); goto out_free_dma_buf;
@@ -701,7 +701,8 @@ static void csi_idmac_stop(struct csi_pr }/* Update the CSI whole sensor and active windows */ -static int csi_setup (struct csi_priv *priv) +static int csi_setup (struct csi_priv *priv, +struct v4l2_mbus_config *mbus_cfg) {struct v4l2_mbus_framefmt *infmt, *outfmt;const struct imx_media_pixfmt *incc;
@@ -719,7 +720,7 @@ static int csi_setup(struct csi_priv *pr* if cycles is set, we need to handle this over multiple cycles as * generic/bayer data */ -if (is_parallel_bus (&priv->mbus_cfg) && incc->cycles) { +if (is_parallel_bus (mbus_cfg) && incc->cycles) { if_fmt.width *= incc->cycles; crop.width *= incc->cycles; }
@@ -730,7 +731,7 @@ static int csi_setup(struct csi_priv *pr priv->crop.width ==2 * priv->compose.width, priv->crop.height == 2 * priv->compose.height); -ipu_csi_init_interface (priv->csi, &priv->mbus_cfg, &if_fmt, outfmt); +ipu_csi_init_interface (priv->csi, mbus_cfg, &if_fmt, outfmt);ipu_csi_set_dest (priv->csi, priv->dest);
@@ -745,9 +746,17 @@ static int csi_setup(struct csi_priv *prstatic int csi_start (struct csi_priv *priv) { +struct v4l2_mbus_config mbus_cfg = { .type =0 };struct v4l2_fract *input_fi, *output_fi;int ret; + ret =csi_get_upstream_mbus_config (priv, &mbus_cfg); +if (ret) { +v4l2_err (&priv->sd, +"failed to get upstream media bus configuration\n" ); +return ret; + } + input_fi = &priv->frame_interval[CSI_SINK_PAD ]; output_fi = &priv->frame_interval[priv->active_output_pad];
@@ -758,7 +767,7 @@ static int csi_start(struct csi_priv *prreturn ret;/* Skip first few frames from a BT.656 source */ -if (priv->mbus_cfg.type ==V4L2_MBUS_BT656 ) { +if (mbus_cfg.type ==V4L2_MBUS_BT656 ) {u32 delay_usec, bad_frames =20 ; delay_usec = DIV_ROUND_UP_ULL((u64)USEC_PER_SEC *
@@ -769,12 +778,12 @@ static int csi_start(struct csi_priv *pr }if (priv->dest ==IPU_CSI_DEST_IDMAC ) { - ret =csi_idmac_start (priv); + ret =csi_idmac_start (priv, &mbus_cfg);if (ret) goto stop_upstream; } - ret =csi_setup (priv); + ret =csi_setup (priv, &mbus_cfg);if (ret) goto idmac_stop;
@@ -1138,7 +1147,6 @@ static int csi_link_validate(struct v4l2mutex_lock (&priv->lock); - priv->mbus_cfg = mbus_cfg; is_csi2 = !is_parallel_bus (&mbus_cfg);if (is_csi2) {/*
Greg Kroah-Hartman
maintainerPATCH 42/201 media: videobuf2: Set vma_flags in vb2_dma_sg_mmap
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Janne Grunau <[email protected]>
commit 7254b31a13aaa0c2c0f9ffbc335b718656117ff4 upstream.
vb2_dma_contig sets VMA flags VM_DONTEXPAND and VM_DONTDUMP and I do not see a reason why vb2_dma_sg should behave differently. This avoids hitting WARN_ON(!(vma->vm_flags & VM_DONTEXPAND)); in drm_gem_mmap_obj() during mmap() of an imported dma-buf from the out of tree Apple ISP camera capture driver which uses vb2_dma_sg_memops.
gst-launch-1.0 v4l2src ! gtk4paintablesink
[ 38.201528] ------------[ cut here ]------------ [ 38.202135] WARNING: CPU: 7 PID: 2362 at drivers/gpu/drm/drm_gem.c:1144 drm_gem_mmap_obj+0x1f8/0x210 [ 38.203278] Modules linked in: rfcomm snd_seq_dummy snd_hrtimer
snd_seq snd_seq_device uinput nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables qrtr bnep nls_ascii i2c_dev loop fuse dm_multipath nfnetlink brcmfmac_wcc hid_magicmouse hci_bcm4377 brcmfmac brcmutil bluetooth ecdh_generic cfg80211 ecc btrfs xor xor_neon rfkill hid_apple raid6_pq joydev aop_als apple_nvmem_spmi industrialio snd_soc_aop apple_z2 snd_soc_cs42l84 tps6598x snd_soc_tas2764 macsmc_reboot spi_nor macsmc_hwmon rtc_macsmc gpio_macsmc macsmc_power regmap_spmi macsmc_input dockchannel_hid panel_summit appledrm nvme_apple dwc3 snd_soc_macaudio drm_client_lib nvme_core phy_apple_atc hwmon apple_sart apple_dockchannel macsmc apple_rtkit_helper spmi_apple_controller aop apple_wdt mfd_core nvmem_apple_efuses pinctrl_apple_gpio apple_isp apple_dcp videobuf2_dma_sg mux_core spi_apple
[ 38.203300] videobuf2_memops i2c_pasemi_platform snd_soc_apple_mca videobuf2_v4l2 videodev clk_apple_nco videobuf2_common snd_pcm_dmaengine adpdrm asahi apple_admac adpdrm_mipi drm_dma_helper pwm_apple i2c_pasemi_core drm_display_helper mc cec apple_dart ofpart apple_soc_cpufreq leds_pwm phram [ 38.217677] CPU: 7 UID: 1000 PID: 2362 Comm: gst-launch-1.0 Tainted: G W 6.17.6+ #asahi-dev PREEMPT(full) [ 38.219040] Tainted: [W]=WARN [ 38.219398] Hardware name: Apple MacBook Pro (13-inch, M2, 2022) (DT) [ 38.220213] pstate: 21400005 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 38.221088] pc : drm_gem_mmap_obj+0x1f8/0x210 [ 38.221643] lr : drm_gem_mmap_obj+0x78/0x210 [ 38.222178] sp : ffffc0008dc678e0 [ 38.222579] x29: ffffc0008dc678e0 x28: 0000000000042a97 x27: ffff8000b701b480 [ 38.223465] x26: 00000000000000fb x25: ffffc0008dc67d20 x24: ffffc0008dc67968 [ 38.224402] x23: ffff8000e3ca5600 x22: ffff8000265b7800 x21: ffff80003000c0c0 [ 38.225279] x20: 0000000000000000 x19: ffff8000b68c5200 x18: ffffc0008dc67968 [ 38.226151] x17: 0000000000000000 x16: 0000000000000000 x15: ffffc000810a30a8 [ 38.227042] x14: 00007fff637effff x13: 00005555de91ffff x12: 00007fff63293fff [ 38.227942] x11: 0000000000000000 x10: ffff8000184ecf08 x9 : ffffc0007a1900c8 [ 38.228824] x8 : ffffc0008dc67968 x7 : 0000000000000012 x6 : ffffc0015cf1c000 [ 38.229703] x5 : ffffc0008dc676a0 x4 : ffffc00081a27dc0 x3 : 0000000000000038 [ 38.230607] x2 : 0000000000000003 x1 : 0000000000000003 x0 : 00000000100000fb [ 38.231488] Call trace: [ 38.231806] drm_gem_mmap_obj+0x1f8/0x210 (P) [ 38.232342] drm_gem_mmap+0x140/0x260 [ 38.232813] __mmap_region+0x488/0x9a0 [ 38.233277] mmap_region+0xd0/0x148 [ 38.233703] do_mmap+0x350/0x5c0 [ 38.234148] vm_mmap_pgoff+0x14c/0x200 [ 38.234612] ksys_mmap_pgoff+0x150/0x208 [ 38.235107] __arm64_sys_mmap+0x34/0x50 [ 38.235611] invoke_syscall+0x50/0x120 [ 38.236075] el0_svc_common.constprop.0+0x48/0xf0 [ 38.236680] do_el0_svc+0x24/0x38 [ 38.237113] el0_svc+0x38/0x168 [ 38.237507] el0t_64_sync_handler+0xa0/0xe8 [ 38.238034] el0t_64_sync+0x198/0x1a0 [ 38.238491] ---[ end trace 0000000000000000 ]---
There were discussions in [1] at the end of 2023 that mmap() on imported dma-bufs should not be supported but as of v6.17 drm_gem_shmem_mmap() in drm_gem_shmem_helper.c still supports it.
This might affect all gpu or accel drivers using drm_gem_shmem_mmap() or the wrapper drm_gem_shmem_object_mmap().
[1] https://lore.kernel.org/dri-devel/[email protected]/
--- drivers/media/common/videobuf2/videobuf2-dma-sg.c | 1 + 1 file changed, 1 insertion(+)
drivers/media/common/videobuf2/videobuf2-dma-sg.c +1 -0
@@ -345,6 +345,7 @@ static int vb2_dma_sg_mmap(void *buf_prireturn err; } +vm_flags_set (vma,VM_DONTEXPAND |VM_DONTDUMP );/* * Use common vm_area operations to track buffer refcount. */
Greg Kroah-Hartman
maintainerPATCH 69/201 media: i2c: ov08d10: fix image vertical start setting
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matthias Fend <[email protected]>
commit 5d150fa0f16096d736bd24d13e04495da5116fab upstream.
The current settings for the "image vertical start" register appear to be incorrect. While this only results in an incorrect start line for native modes, this faulty setting causes actual problems in binning mode. At least on an i.MX8MP test system, only corrupted frames could be received. To correct this, the recommended settings from the reference register sets are used for all modes. Since this shifts the start by one line, the Bayer pattern also changes, which has also been corrected.
--- drivers/media/i2c/ov08d10.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/media/i2c/ov08d10.c +5 -5
@@ -217,7 +217,7 @@ static const struct ov08d10_reg lane_2_m {0x9a, 0x30}, {0xa8, 0x02}, {0xfd, 0x02}, - {0xa1, 0x01}, + {0xa1, 0x00}, {0xa2, 0x09}, {0xa3, 0x9c}, {0xa5, 0x00},
@@ -335,7 +335,7 @@ static const struct ov08d10_reg lane_2_m {0x9a, 0x30}, {0xa8, 0x02}, {0xfd, 0x02}, - {0xa1, 0x09}, + {0xa1, 0x08}, {0xa2, 0x09}, {0xa3, 0x90}, {0xa5, 0x08},
@@ -467,7 +467,7 @@ static const struct ov08d10_reg lane_2_m {0xaa, 0xd0}, {0xab, 0x06}, {0xac, 0x68}, - {0xa1, 0x09}, + {0xa1, 0x04}, {0xa2, 0x04}, {0xa3, 0xc8}, {0xa5, 0x04},
@@ -613,8 +613,8 @@ static const struct ov08d10_lane_cfg lanstatic u32 ov08d10_get_format_code (struct ov08d10 *ov08d10) {static const u32 codes[2 ][2 ] = { - {MEDIA_BUS_FMT_SGRBG10_1X10 ,MEDIA_BUS_FMT_SRGGB10_1X10 }, - {MEDIA_BUS_FMT_SBGGR10_1X10 ,MEDIA_BUS_FMT_SGBRG10_1X10 }, + {MEDIA_BUS_FMT_SBGGR10_1X10 ,MEDIA_BUS_FMT_SGBRG10_1X10 }, + {MEDIA_BUS_FMT_SGRBG10_1X10 ,MEDIA_BUS_FMT_SRGGB10_1X10 }, };return codes[ov08d10->vflip->val][ov08d10->hflip->val];
Greg Kroah-Hartman
maintainerPATCH 70/201 media: i2c: ov08d10: fix runtime PM handling in probe
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matthias Fend <[email protected]>
commit 35c7046be2be5e60be8128facb359a47f39e99cd upstream.
Set the device's runtime PM status and enable runtime PM before registering the async sub-device. This is needed to avoid the case where the device is runtime PM resumed while runtime PM has not been enabled yet.
Remove the related, non-driver-specific comment while at it.
--- drivers/media/i2c/ov08d10.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-)
drivers/media/i2c/ov08d10.c +5 -6
@@ -1430,6 +1430,9 @@ static int ov08d10_probe(struct i2c_clie goto probe_error_v4l2_ctrl_handler_free; } +pm_runtime_set_active (ov08d10->dev); +pm_runtime_enable (ov08d10->dev); + ret =v4l2_async_register_subdev_sensor (&ov08d10->sd);if (ret <0 ) { dev_err(ov08d10->dev, "failed to register V4L2 subdev: %d",
@@ -1437,17 +1440,13 @@ static int ov08d10_probe(struct i2c_clie goto probe_error_media_entity_cleanup; } -/* -* Device is already turned on by i2c-core with ACPI domain PM. -* Enable runtime PM and turn off the device. -*/ -pm_runtime_set_active (ov08d10->dev); -pm_runtime_enable (ov08d10->dev);pm_runtime_idle (ov08d10->dev);return 0 ; probe_error_media_entity_cleanup: +pm_runtime_disable (ov08d10->dev); +pm_runtime_set_suspended (ov08d10->dev);media_entity_cleanup (&ov08d10->sd.entity); probe_error_v4l2_ctrl_handler_free:
Greg Kroah-Hartman
maintainerPATCH 71/201 media: omap3isp: drop the use count of v4l2 pipeline
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Haoxiang Li <[email protected]>
commit 9da49bd9d4224035cff39b40d7395310abb10201 upstream.
In isp_video_open(), drop the use count of v4l2
pipeline if vb2_queue_init() fails.
--- drivers/media/platform/ti/omap3isp/ispvideo.c | 1 + 1 file changed, 1 insertion(+)
drivers/media/platform/ti/omap3isp/ispvideo.c +1 -0
@@ -1403,6 +1403,7 @@ static int isp_video_open(struct file *f ret =vb2_queue_init (&handle->queue);if (ret <0 ) { +v4l2_pipeline_pm_put (&video->video.entity);omap3isp_put (video->isp); goto done; }
Greg Kroah-Hartman
maintainerPATCH 72/201 media: iris: fix QCOM_MDT_LOADER dependency
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
commit a297c5165f91366cbc3490e630aabd1c0f70efb8 upstream.
When build-testined with CONFIG_QCOM_MDT_LOADER=m and VIDEO_QCOM_IRIS=y, the kernel fails to link:
x86_64-linux-ld: drivers/media/platform/qcom/iris/iris_firmware.o: in function `iris_fw_load':
iris_firmware.c:(.text+0xb0): undefined reference to qcom_mdt_get_size' iris_firmware.c:(.text+0xfd): undefined reference to qcom_mdt_load'
The problem is the conditional 'select' statement. Change this to make the driver built-in here regardless of CONFIG_ARCH_QCOM.
--- drivers/media/platform/qcom/iris/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/media/platform/qcom/iris/Kconfig +1 -1
@@ -3,7 +3,7 @@ config VIDEO_QCOM_IRIS depends on VIDEO_DEV depends on ARCH_QCOM || COMPILE_TEST select V4L2_MEM2MEM_DEV - select QCOM_MDT_LOADER if ARCH_QCOM + select QCOM_MDT_LOADER select QCOM_SCM select VIDEOBUF2_DMA_CONTIG help
Greg Kroah-Hartman
maintainerPATCH 73/201 media: iris: Fix use-after-free in iris_release_internal_buffers()
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dikshita Agarwal <[email protected]>
commit f27cfdcfc916bb59297825805f4c3499f89f9e76 upstream.
The recent change in commit 1dabf00ee206 ("media: iris: gen1: Destroy internal buffers after FW releases") introduced a regression where session_release_buf() may free the buffer. The caller, iris_release_internal_buffers(), continued to access buffer after the call, leading to a potential use-after-free.
Fix this by setting BUF_ATTR_PENDING_RELEASE before calling session_release_buf(), and reverting the flag if the call fails. This ensures no dereference occurs after potential freeing.
--- drivers/media/platform/qcom/iris/iris_buffer.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/media/platform/qcom/iris/iris_buffer.c +4 -2
@@ -582,10 +582,12 @@ static int iris_release_internal_bufferscontinue ;if (!(buffer->attr &BUF_ATTR_QUEUED ))continue ; + buffer->attr |=BUF_ATTR_PENDING_RELEASE ; ret = hfi_ops->session_release_buf (inst, buffer); -if (ret) +if (ret) { + buffer->attr &= ~BUF_ATTR_PENDING_RELEASE ;return ret; - buffer->attr |=BUF_ATTR_PENDING_RELEASE ; + } }return 0 ;
Greg Kroah-Hartman
maintainerPATCH 74/201 media: qcom: camss: Fix csid clock configuration for sa8775p
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wenmeng Liu <[email protected]>
commit fe56c674118aa46da1a3e65aa22ca709ebd7d812 upstream.
Fix the mismatch between clock list and clock rate table for CSID lite instances. The current implementation has 5 clocks defined but only 2 are actually needed (vfe_lite_csid and vfe_lite_cphy_rx), while the clock rate table doesn't match this configuration.
Update both clock list and rate table to maintain consistency:
- Remove unused clocks: cpas_vfe_lite, vfe_lite_ahb, vfe_lite
- Update clock rate table to match the remaining two clocks
--- drivers/media/platform/qcom/camss/camss.c | 40 +++++++++++------------------- 1 file changed, 15 insertions(+), 25 deletions(-)
drivers/media/platform/qcom/camss/camss.c +15 -25
@@ -3598,12 +3598,10 @@ static const struct camss_subdev_resourc/* CSID2 (lite) */ { .regulators = {}, - .clock = { "cpas_vfe_lite", "vfe_lite_ahb", -"vfe_lite_csid" ,"vfe_lite_cphy_rx" , - "vfe_lite"}, + .clock = { "vfe_lite_csid", "vfe_lite_cphy_rx" }, .clock_rate = { - { 0, 0, 400000000, 400000000, 0}, - { 0, 0, 400000000, 480000000, 0} + { 400000000, 480000000 }, + { 400000000, 480000000 } }, .reg = { "csid_lite0" }, .interrupt = { "csid_lite0" },
@@ -3617,12 +3615,10 @@ static const struct camss_subdev_resourc/* CSID3 (lite) */ { .regulators = {}, - .clock = { "cpas_vfe_lite", "vfe_lite_ahb", -"vfe_lite_csid" ,"vfe_lite_cphy_rx" , - "vfe_lite"}, + .clock = { "vfe_lite_csid", "vfe_lite_cphy_rx" }, .clock_rate = { - { 0, 0, 400000000, 400000000, 0}, - { 0, 0, 400000000, 480000000, 0} + { 400000000, 480000000 }, + { 400000000, 480000000 } }, .reg = { "csid_lite1" }, .interrupt = { "csid_lite1" },
@@ -3636,12 +3632,10 @@ static const struct camss_subdev_resourc/* CSID4 (lite) */ { .regulators = {}, - .clock = { "cpas_vfe_lite", "vfe_lite_ahb", -"vfe_lite_csid" ,"vfe_lite_cphy_rx" , - "vfe_lite"}, + .clock = { "vfe_lite_csid", "vfe_lite_cphy_rx" }, .clock_rate = { - { 0, 0, 400000000, 400000000, 0}, - { 0, 0, 400000000, 480000000, 0} + { 400000000, 480000000 }, + { 400000000, 480000000 } }, .reg = { "csid_lite2" }, .interrupt = { "csid_lite2" },
@@ -3655,12 +3649,10 @@ static const struct camss_subdev_resourc/* CSID5 (lite) */ { .regulators = {}, - .clock = { "cpas_vfe_lite", "vfe_lite_ahb", -"vfe_lite_csid" ,"vfe_lite_cphy_rx" , - "vfe_lite"}, + .clock = { "vfe_lite_csid", "vfe_lite_cphy_rx" }, .clock_rate = { - { 0, 0, 400000000, 400000000, 0}, - { 0, 0, 400000000, 480000000, 0} + { 400000000, 480000000 }, + { 400000000, 480000000 } }, .reg = { "csid_lite3" }, .interrupt = { "csid_lite3" },
@@ -3674,12 +3666,10 @@ static const struct camss_subdev_resourc/* CSID6 (lite) */ { .regulators = {}, - .clock = { "cpas_vfe_lite", "vfe_lite_ahb", -"vfe_lite_csid" ,"vfe_lite_cphy_rx" , - "vfe_lite"}, + .clock = { "vfe_lite_csid", "vfe_lite_cphy_rx" }, .clock_rate = { - { 0, 0, 400000000, 400000000, 0}, - { 0, 0, 400000000, 480000000, 0} + { 400000000, 480000000 }, + { 400000000, 480000000 } }, .reg = { "csid_lite4" }, .interrupt = { "csid_lite4" },
Greg Kroah-Hartman
maintainerPATCH 75/201 media: qcom: camss: Fix csid IRQ offset for sa8775p
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wenmeng Liu <[email protected]>
commit dd1b373941079cc102cc18bc68884e18245f5912 upstream.
Fix BUF_DONE_IRQ_STATUS_RDI_OFFSET calculation for csid lite on sa8775p platform. The offset should be 0 for csid lite on sa8775p,
--- drivers/media/platform/qcom/camss/camss-csid-gen3.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/media/platform/qcom/camss/camss-csid-gen3.c +3 -3
@@ -48,9 +48,9 @@#define IS_CSID_690 (csid) ((csid->camss->res->version == CAMSS_8775P) \ || (csid->camss->res->version == CAMSS_8300))#define CSID_BUF_DONE_IRQ_STATUS 0x8C -#define BUF_DONE_IRQ_STATUS_RDI_OFFSET (csid_is_lite(csid) ?\ - 1 : (IS_CSID_690(csid) ?\ - 13 : 14)) +#define BUF_DONE_IRQ_STATUS_RDI_OFFSET (csid_is_lite(csid) ? \ + ((IS_CSID_690(csid) ? 0 : 1)) : \ + ((IS_CSID_690(csid) ? 13 : 14)))#define CSID_BUF_DONE_IRQ_MASK 0x90#define CSID_BUF_DONE_IRQ_CLEAR 0x94#define CSID_BUF_DONE_IRQ_SET 0x98
Greg Kroah-Hartman
maintainerPATCH 76/201 media: qcom: iris: increase H265D_MAX_SLICE to fix H.265 decoding on SC7280
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dmitry Baryshkov <[email protected]>
commit 3e0b2053751657ed2924adfe3ff25b1450231e33 upstream.
Follow the commit bfe1326573ff ("venus: Fix for H265 decoding failure.") and increase H265D_MAX_SLICE following firmware requirements on that platform. Otherwise decoding of the H.265 streams fails with the "insufficient scratch_1 buffer size" from the firmware.
--- drivers/media/platform/qcom/iris/iris_vpu_buffer.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/media/platform/qcom/iris/iris_vpu_buffer.h +1 -1
@@ -67,7 +67,7 @@ struct iris_inst;#define SIZE_DOLBY_RPU_METADATA (41 * 1024)#define H264_CABAC_HDR_RATIO_HD_TOT 1#define H264_CABAC_RES_RATIO_HD_TOT 3 -#define H265D_MAX_SLICE 1200 +#define H265D_MAX_SLICE 3600#define SIZE_H265D_HW_PIC_T SIZE_H264D_HW_PIC_T#define H265_CABAC_HDR_RATIO_HD_TOT 2#define H265_CABAC_RES_RATIO_HD_TOT 2
Greg Kroah-Hartman
maintainerPATCH 77/201 media: venus: fix QCOM_MDT_LOADER dependency
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
commit aa23c94cc433b145d1ce93820ecdfe16d8940e28 upstream.
When build-testined with CONFIG_QCOM_MDT_LOADER=m and VIDEO_QCOM_VENUS=y, the kernel fails to link:
x86_64-linux-ld: drivers/media/platform/qcom/venus/firmware.o: in function `venus_boot':
firmware.c:(.text+0x1e3): undefined reference to qcom_mdt_get_size' firmware.c:(.text+0x25a): undefined reference to qcom_mdt_load' firmware.c:(.text+0x272): undefined reference to `qcom_mdt_load_no_init'
The problem is the conditional 'select' statement. Change this to make the driver built-in here regardless of CONFIG_ARCH_QCOM, same as for the similar IRIS driver.
--- drivers/media/platform/qcom/venus/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/media/platform/qcom/venus/Kconfig +1 -1
@@ -4,7 +4,7 @@ config VIDEO_QCOM_VENUS depends on VIDEO_DEV && QCOM_SMEM depends on (ARCH_QCOM && ARM64 && IOMMU_API) || COMPILE_TEST select OF_DYNAMIC if ARCH_QCOM - select QCOM_MDT_LOADER if ARCH_QCOM + select QCOM_MDT_LOADER select QCOM_SCM select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV
Greg Kroah-Hartman
maintainerPATCH 78/201 media: iris: Fix dma_free_attrs() size in iris_hfi_queues_init()
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Fourier <[email protected]>
commit 4a49ae56b0e4268d48fd96babe0cc68596bc301a upstream.
The core->iface_q_table_vaddr buffer is alloc'd with size queue_size but freed with sizeof(*q_tbl_hdr) which is different.
Change the dma_free_attrs() size.
--- drivers/media/platform/qcom/iris/iris_hfi_queue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/media/platform/qcom/iris/iris_hfi_queue.c +1 -1
@@ -263,7 +263,7 @@ int iris_hfi_queues_init(struct iris_cor GFP_KERNEL, DMA_ATTR_WRITE_COMBINE);if (!core->sfr_vaddr) {dev_err (core->dev,"sfr alloc and map failed\n" ); -dma_free_attrs (core->dev,sizeof (*q_tbl_hdr), core->iface_q_table_vaddr, +dma_free_attrs (core->dev, queue_size, core->iface_q_table_vaddr, core->iface_q_table_daddr,DMA_ATTR_WRITE_COMBINE );return -ENOMEM ; }
Greg Kroah-Hartman
maintainerPATCH 43/201 media: rockchip: rkcif: Add missing MUST_CONNECT flag to pads
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dang Huynh <[email protected]>
commit 8e3c751259dc2d1325838eff26f41032523c7b57 upstream.
The pads missed checks for connected devices which may a null dereference when the stream is enabled.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 pc : rkcif_interface_enable_streams+0x48/0xf0 lr : rkcif_interface_enable_streams+0x44/0xf0 Call trace: rkcif_interface_enable_streams+0x48/0xf0 v4l2_subdev_enable_streams+0x26c/0x3f0 rkcif_stream_start_streaming+0x140/0x278 vb2_start_streaming+0x74/0x188 vb2_core_streamon+0xe0/0x1d8 vb2_ioctl_streamon+0x60/0xa8 v4l_streamon+0x2c/0x40 __video_do_ioctl+0x34c/0x400 video_usercopy+0x2d0/0x800 video_ioctl2+0x20/0x60 v4l2_ioctl+0x48/0x78
--- drivers/media/platform/rockchip/rkcif/rkcif-interface.c | 3 ++- drivers/media/platform/rockchip/rkcif/rkcif-stream.c | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-)
drivers/media/platform/rockchip/rkcif/rkcif-interface.c +2 -1
@@ -378,7 +378,8 @@ int rkcif_interface_register(struct rkcif_device *rkcif,snprintf (sd->name,sizeof (sd->name),"rkcif-mipi%d" , interface->index -RKCIF_MIPI_BASE ); - pads[RKCIF_IF_PAD_SINK ].flags =MEDIA_PAD_FL_SINK ; + pads[RKCIF_IF_PAD_SINK ].flags =MEDIA_PAD_FL_SINK | +MEDIA_PAD_FL_MUST_CONNECT ; pads[RKCIF_IF_PAD_SRC ].flags =MEDIA_PAD_FL_SOURCE ; ret =media_entity_pads_init (&sd->entity,RKCIF_IF_PAD_MAX , pads);if (ret)
drivers/media/platform/rockchip/rkcif/rkcif-stream.c +1 -1
@@ -555,7 +555,7 @@ int rkcif_stream_register(struct rkcif_device *rkcif, vdev->vfl_dir =VFL_DIR_RX ;video_set_drvdata (vdev, stream); - stream->pad.flags =MEDIA_PAD_FL_SINK ; + stream->pad.flags =MEDIA_PAD_FL_SINK |MEDIA_PAD_FL_MUST_CONNECT ; stream->pix.height =CIF_MIN_HEIGHT ; stream->pix.width =CIF_MIN_WIDTH ;
Signature · 1 line
2.54.0
Greg Kroah-Hartman
maintainerPATCH 79/201 media: iris: fix use-after-free of fmt_src during MBPF check
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vishnu Reddy <[email protected]>
commit 3d9593ad1a58c5acc3e5fa2a48222bb7632e6812 upstream.
During concurrency testing, multiple instances can run in parallel, and each instance uses its own inst->lock while the core->lock protects the list of active instances. The race happens because these locks cover different scopes, inst->lock protects only the internals of a single instance, while the Macro Blocks Per Frame (MBPF) checker walks the core list under core->lock and reads fields like fmt_src->width and fmt_src->height. At the same time, iris_close() may free fmt_src and fmt_dst under inst->lock while the instance is still present in the core list. This allows a situation where the MBPF checker, still iterating through the core list, reaches an instance whose fmt_src was already freed by another thread and ends up dereferencing a dangling pointer, resulting in a use-after-free. This happens because the MBPF checker assumes that any instance in the core list is fully valid, but the freeing of fmt_src and fmt_dst without removing the instance from the core list is not correct.
The correct ordering is to defer freeing fmt_src and fmt_dst until after the instance has been removed from the core list and all teardown under the core lock has completed, ensuring that no dangling pointers are ever exposed during MBPF checks.
--- drivers/media/platform/qcom/iris/iris_vdec.c | 6 ------ drivers/media/platform/qcom/iris/iris_vdec.h | 1 - drivers/media/platform/qcom/iris/iris_venc.c | 6 ------ drivers/media/platform/qcom/iris/iris_venc.h | 1 - drivers/media/platform/qcom/iris/iris_vidc.c | 6 ++---- 5 files changed, 2 insertions(+), 18 deletions(-)
drivers/media/platform/qcom/iris/iris_vdec.c +0 -6
@@ -61,12 +61,6 @@ int iris_vdec_inst_init(struct iris_instreturn iris_ctrls_init (inst); } -void iris_vdec_inst_deinit (struct iris_inst *inst) -{ -kfree (inst->fmt_dst); -kfree (inst->fmt_src); -} -static const struct iris_fmt iris_vdec_formats_cap[] = { [IRIS_FMT_NV12 ] = { .pixfmt =V4L2_PIX_FMT_NV12 ,
drivers/media/platform/qcom/iris/iris_vdec.h +0 -1
@@ -9,7 +9,6 @@struct iris_inst ;int iris_vdec_inst_init (struct iris_inst *inst); -void iris_vdec_inst_deinit (struct iris_inst *inst);int iris_vdec_enum_fmt (struct iris_inst *inst,struct v4l2_fmtdesc *f);int iris_vdec_try_fmt (struct iris_inst *inst,struct v4l2_format *f);int iris_vdec_s_fmt (struct iris_inst *inst,struct v4l2_format *f);
drivers/media/platform/qcom/iris/iris_venc.c +0 -6
@@ -79,12 +79,6 @@ int iris_venc_inst_init(struct iris_instreturn iris_ctrls_init (inst); } -void iris_venc_inst_deinit (struct iris_inst *inst) -{ -kfree (inst->fmt_dst); -kfree (inst->fmt_src); -} -static const struct iris_fmt iris_venc_formats_cap[] = { [IRIS_FMT_H264 ] = { .pixfmt =V4L2_PIX_FMT_H264 ,
drivers/media/platform/qcom/iris/iris_venc.h +0 -1
@@ -9,7 +9,6 @@struct iris_inst ;int iris_venc_inst_init (struct iris_inst *inst); -void iris_venc_inst_deinit (struct iris_inst *inst);int iris_venc_enum_fmt (struct iris_inst *inst,struct v4l2_fmtdesc *f);int iris_venc_try_fmt (struct iris_inst *inst,struct v4l2_format *f);int iris_venc_s_fmt (struct iris_inst *inst,struct v4l2_format *f);
drivers/media/platform/qcom/iris/iris_vidc.c +2 -4
@@ -289,10 +289,6 @@ int iris_close(struct file *filp)v4l2_m2m_ctx_release (inst->m2m_ctx);v4l2_m2m_release (inst->m2m_dev);mutex_lock (&inst->lock); -if (inst->domain ==DECODER ) -iris_vdec_inst_deinit (inst); -else if (inst->domain ==ENCODER ) -iris_venc_inst_deinit (inst);iris_session_close (inst);iris_inst_change_state (inst,IRIS_INST_DEINIT );iris_v4l2_fh_deinit (inst, filp);
@@ -304,6 +300,8 @@ int iris_close(struct file *filp)mutex_unlock (&inst->lock);mutex_destroy (&inst->ctx_q_lock);mutex_destroy (&inst->lock); +kfree (inst->fmt_src); +kfree (inst->fmt_dst);kfree (inst);return 0 ;
Greg Kroah-Hartman
maintainerPATCH 80/201 media: iris: switch to hardware mode after firmware boot
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vikash Garodia <[email protected]>
commit 95a337f92f0a602d4f935315bfbc8bf07f475e65 upstream.
Currently the driver switches the vcodec GDSC to hardware (HW) mode before firmware load and boot sequence. GDSC can be powered off, keeping in hw mode, thereby the vcodec registers programmed in TrustZone (TZ) carry default (reset) values.
Move the transition to HW mode after firmware load and boot sequence.
The bug was exposed with driver configuring different stream ids to different devices via iommu-map. With registers carrying reset values, VPU would not generate desired stream-id, thereby leading to SMMU fault.
For vpu4, when GDSC is switched to HW mode, there is a need to perform the reset operation. Without reset, there are occasional issues of register corruption observed. Hence the vpu GDSC switch also involves the reset.
--- drivers/media/platform/qcom/iris/iris_core.c | 4 +++ drivers/media/platform/qcom/iris/iris_hfi_common.c | 4 +++ drivers/media/platform/qcom/iris/iris_vpu2.c | 1 drivers/media/platform/qcom/iris/iris_vpu3x.c | 9 ++----- drivers/media/platform/qcom/iris/iris_vpu4x.c | 24 +++++++++++---------- drivers/media/platform/qcom/iris/iris_vpu_common.c | 16 ++++++++------ drivers/media/platform/qcom/iris/iris_vpu_common.h | 3 ++ 7 files changed, 38 insertions(+), 23 deletions(-)
drivers/media/platform/qcom/iris/iris_core.c +4 -0
@@ -75,6 +75,10 @@ int iris_core_init(struct iris_core *corif (ret) goto error_unload_fw; + ret =iris_vpu_switch_to_hwmode (core); +if (ret) + goto error_unload_fw; + ret =iris_hfi_core_init (core);if (ret) goto error_unload_fw;
drivers/media/platform/qcom/iris/iris_hfi_common.c +4 -0
@@ -159,6 +159,10 @@ int iris_hfi_pm_resume(struct iris_coreif (ret) goto err_suspend_hw; + ret =iris_vpu_switch_to_hwmode (core); +if (ret) + goto err_suspend_hw; + ret = ops->sys_interframe_powercollapse (core);if (ret) goto err_suspend_hw;
drivers/media/platform/qcom/iris/iris_vpu2.c +1 -0
@@ -44,4 +44,5 @@ const struct vpu_ops iris_vpu2_ops = { .power_off_controller = iris_vpu_power_off_controller, .power_on_controller = iris_vpu_power_on_controller, .calc_freq = iris_vpu2_calc_freq, + .set_hwmode = iris_vpu_set_hwmode, };
drivers/media/platform/qcom/iris/iris_vpu3x.c +3 -6
@@ -234,14 +234,8 @@ static int iris_vpu35_power_on_hw(structif (ret) goto err_disable_hw_free_clk; - ret =dev_pm_genpd_set_hwmode (core->pmdomain_tbl->pd_devs[IRIS_HW_POWER_DOMAIN ], true); -if (ret) - goto err_disable_hw_clk; -return 0 ; -err_disable_hw_clk: -iris_disable_unprepare_clock (core,IRIS_HW_CLK ); err_disable_hw_free_clk:iris_disable_unprepare_clock (core,IRIS_HW_FREERUN_CLK ); err_disable_axi_clk:
@@ -266,6 +260,7 @@ const struct vpu_ops iris_vpu3_ops = { .power_off_controller = iris_vpu_power_off_controller, .power_on_controller = iris_vpu_power_on_controller, .calc_freq = iris_vpu3x_vpu4x_calculate_frequency, + .set_hwmode = iris_vpu_set_hwmode, };const struct vpu_ops iris_vpu33_ops = {
@@ -274,6 +269,7 @@ const struct vpu_ops iris_vpu33_ops = { .power_off_controller = iris_vpu33_power_off_controller, .power_on_controller = iris_vpu_power_on_controller, .calc_freq = iris_vpu3x_vpu4x_calculate_frequency, + .set_hwmode = iris_vpu_set_hwmode, };const struct vpu_ops iris_vpu35_ops = {
@@ -283,4 +279,5 @@ const struct vpu_ops iris_vpu35_ops = { .power_on_controller = iris_vpu35_vpu4x_power_on_controller, .program_bootup_registers = iris_vpu35_vpu4x_program_bootup_registers, .calc_freq = iris_vpu3x_vpu4x_calculate_frequency, + .set_hwmode = iris_vpu_set_hwmode, };
drivers/media/platform/qcom/iris/iris_vpu4x.c +13 -11
@@ -252,21 +252,10 @@ static int iris_vpu4x_power_on_hardware( ret =iris_vpu4x_power_on_apv (core);if (ret) goto disable_hw_clocks; - -iris_vpu4x_ahb_sync_reset_apv (core); } -iris_vpu4x_ahb_sync_reset_hardware (core); - - ret =iris_vpu4x_genpd_set_hwmode (core, true, efuse_value); -if (ret) - goto disable_apv_power_domain; -return 0 ; -disable_apv_power_domain: -if (!(efuse_value &DISABLE_VIDEO_APV_BIT )) -iris_vpu4x_power_off_apv (core); disable_hw_clocks:iris_vpu4x_disable_hardware_clocks (core, efuse_value); disable_vpp1_power_domain:
@@ -359,6 +348,18 @@ disable_clocks_and_power:iris_disable_power_domains (core, core->pmdomain_tbl->pd_devs[IRIS_HW_POWER_DOMAIN ]); } +static int iris_vpu4x_set_hwmode (struct iris_core *core) +{ +u32 efuse_value =readl (core->reg_base +WRAPPER_EFUSE_MONITOR ); + +if (!(efuse_value &DISABLE_VIDEO_APV_BIT )) +iris_vpu4x_ahb_sync_reset_apv (core); + +iris_vpu4x_ahb_sync_reset_hardware (core); + +return iris_vpu4x_genpd_set_hwmode (core, true, efuse_value); +} +const struct vpu_ops iris_vpu4x_ops = { .power_off_hw = iris_vpu4x_power_off_hardware, .power_on_hw = iris_vpu4x_power_on_hardware,
@@ -366,4 +367,5 @@ const struct vpu_ops iris_vpu4x_ops = { .power_on_controller = iris_vpu35_vpu4x_power_on_controller, .program_bootup_registers = iris_vpu35_vpu4x_program_bootup_registers, .calc_freq = iris_vpu3x_vpu4x_calculate_frequency, + .set_hwmode = iris_vpu4x_set_hwmode, };
drivers/media/platform/qcom/iris/iris_vpu_common.c +10 -6
@@ -292,14 +292,8 @@ int iris_vpu_power_on_hw(struct iris_corif (ret && ret != -ENOENT ) goto err_disable_hw_clock; - ret =dev_pm_genpd_set_hwmode (core->pmdomain_tbl->pd_devs[IRIS_HW_POWER_DOMAIN ], true); -if (ret) - goto err_disable_hw_ahb_clock; -return 0 ; -err_disable_hw_ahb_clock: -iris_disable_unprepare_clock (core,IRIS_HW_AHB_CLK ); err_disable_hw_clock:iris_disable_unprepare_clock (core,IRIS_HW_CLK ); err_disable_power:
@@ -308,6 +302,16 @@ err_disable_power:return ret; } +int iris_vpu_set_hwmode (struct iris_core *core) +{ +return dev_pm_genpd_set_hwmode (core->pmdomain_tbl->pd_devs[IRIS_HW_POWER_DOMAIN ], true); +} + +int iris_vpu_switch_to_hwmode (struct iris_core *core) +{ +return core->iris_platform_data->vpu_ops->set_hwmode (core); +} +int iris_vpu35_vpu4x_power_off_controller (struct iris_core *core) {u32 clk_rst_tbl_size = core->iris_platform_data->clk_rst_tbl_size;
drivers/media/platform/qcom/iris/iris_vpu_common.h +3 -0
@@ -21,6 +21,7 @@ struct vpu_ops {int (*power_on_controller)(struct iris_core *core);void (*program_bootup_registers)(struct iris_core *core);u64 (*calc_freq)(struct iris_inst *inst,size_t data_size); +int (*set_hwmode)(struct iris_core *core); };int iris_vpu_boot_firmware (struct iris_core *core);
@@ -30,6 +31,8 @@ int iris_vpu_watchdog(struct iris_core *int iris_vpu_prepare_pc (struct iris_core *core);int iris_vpu_power_on_controller (struct iris_core *core);int iris_vpu_power_on_hw (struct iris_core *core); +int iris_vpu_set_hwmode (struct iris_core *core); +int iris_vpu_switch_to_hwmode (struct iris_core *core);int iris_vpu_power_on (struct iris_core *core);int iris_vpu_power_off_controller (struct iris_core *core);void iris_vpu_power_off_hw (struct iris_core *core);
Greg Kroah-Hartman
maintainerPATCH 81/201 media: qcom: camss: Add missing clocks for VFE lite on sa8775p
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wenmeng Liu <[email protected]>
commit d31fac47b39f5e1ed85a587688ca70b793e421b4 upstream.
Add missing required clocks (cpas_ahb and camnoc_axi) for VFE lite instances on sa8775p platform. These clocks are necessary for proper VFE lite operation:
--- drivers/media/platform/qcom/camss/camss.c | 40 ++++++++++++++++++------------ 1 file changed, 25 insertions(+), 15 deletions(-)
drivers/media/platform/qcom/camss/camss.c +25 -15
@@ -3742,15 +3742,17 @@ static const struct camss_subdev_resourc/* VFE2 (lite) */ { .regulators = {}, - .clock = { "cpas_vfe_lite", "vfe_lite_ahb", + .clock = { "cpas_ahb", "cpas_vfe_lite", "vfe_lite_ahb","vfe_lite_csid" ,"vfe_lite_cphy_rx" , - "vfe_lite"}, + "vfe_lite", "camnoc_axi"}, .clock_rate = { - { 0, 0, 0, 0 }, + { 0 }, + { 0 }, { 300000000, 400000000, 400000000, 400000000 }, { 400000000, 400000000, 400000000, 400000000 }, { 400000000, 400000000, 400000000, 400000000 }, { 480000000, 600000000, 600000000, 600000000 }, + { 400000000 }, }, .reg = { "vfe_lite0" }, .interrupt = { "vfe_lite0" },
@@ -3765,15 +3767,17 @@ static const struct camss_subdev_resourc/* VFE3 (lite) */ { .regulators = {}, - .clock = { "cpas_vfe_lite", "vfe_lite_ahb", + .clock = { "cpas_ahb", "cpas_vfe_lite", "vfe_lite_ahb","vfe_lite_csid" ,"vfe_lite_cphy_rx" , - "vfe_lite"}, + "vfe_lite", "camnoc_axi"}, .clock_rate = { - { 0, 0, 0, 0 }, + { 0 }, + { 0 }, { 300000000, 400000000, 400000000, 400000000 }, { 400000000, 400000000, 400000000, 400000000 }, { 400000000, 400000000, 400000000, 400000000 }, { 480000000, 600000000, 600000000, 600000000 }, + { 400000000 }, }, .reg = { "vfe_lite1" }, .interrupt = { "vfe_lite1" },
@@ -3788,15 +3792,17 @@ static const struct camss_subdev_resourc/* VFE4 (lite) */ { .regulators = {}, - .clock = { "cpas_vfe_lite", "vfe_lite_ahb", + .clock = { "cpas_ahb", "cpas_vfe_lite", "vfe_lite_ahb","vfe_lite_csid" ,"vfe_lite_cphy_rx" , - "vfe_lite"}, + "vfe_lite", "camnoc_axi"}, .clock_rate = { - { 0, 0, 0, 0 }, + { 0 }, + { 0 }, { 300000000, 400000000, 400000000, 400000000 }, { 400000000, 400000000, 400000000, 400000000 }, { 400000000, 400000000, 400000000, 400000000 }, { 480000000, 600000000, 600000000, 600000000 }, + { 400000000 }, }, .reg = { "vfe_lite2" }, .interrupt = { "vfe_lite2" },
@@ -3811,15 +3817,17 @@ static const struct camss_subdev_resourc/* VFE5 (lite) */ { .regulators = {}, - .clock = { "cpas_vfe_lite", "vfe_lite_ahb", + .clock = { "cpas_ahb", "cpas_vfe_lite", "vfe_lite_ahb","vfe_lite_csid" ,"vfe_lite_cphy_rx" , - "vfe_lite"}, + "vfe_lite", "camnoc_axi"}, .clock_rate = { - { 0, 0, 0, 0 }, + { 0 }, + { 0 }, { 300000000, 400000000, 400000000, 400000000 }, { 400000000, 400000000, 400000000, 400000000 }, { 400000000, 400000000, 400000000, 400000000 }, { 480000000, 600000000, 600000000, 600000000 }, + { 400000000 }, }, .reg = { "vfe_lite3" }, .interrupt = { "vfe_lite3" },
@@ -3834,15 +3842,17 @@ static const struct camss_subdev_resourc/* VFE6 (lite) */ { .regulators = {}, - .clock = { "cpas_vfe_lite", "vfe_lite_ahb", + .clock = { "cpas_ahb", "cpas_vfe_lite", "vfe_lite_ahb","vfe_lite_csid" ,"vfe_lite_cphy_rx" , - "vfe_lite"}, + "vfe_lite", "camnoc_axi"}, .clock_rate = { - { 0, 0, 0, 0 }, + { 0 }, + { 0 }, { 300000000, 400000000, 400000000, 400000000 }, { 400000000, 400000000, 400000000, 400000000 }, { 400000000, 400000000, 400000000, 400000000 }, { 480000000, 600000000, 600000000, 600000000 }, + { 400000000 }, }, .reg = { "vfe_lite4" }, .interrupt = { "vfe_lite4" },
Greg Kroah-Hartman
maintainerPATCH 82/201 drm/xe/hdcp: Add NULL check for media_gt in intel_hdcp_gsc_check_status()
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gustavo Sousa <[email protected]>
commit 60a1e131a811b68703da58fd805ab359b704ab03 upstream.
When media GT is disabled via configfs, there is no allocation for media_gt, which is kept as NULL. In such scenario, intel_hdcp_gsc_check_status() results in a kernel pagefault error due to >->uc.gsc being evaluated as an invalid memory address.
Fix that by introducing a NULL check on media_gt and bailing out early if so.
While at it, also drop the NULL check for gsc, since it can't be NULL if media_gt is not NULL.
v2:
- Get address for gsc only after checking that gt is not NULL. (Shuicheng)
- Drop the NULL check for gsc. (Shuicheng)
v3:
- Add "Fixes" and "Cc: <stable...>" tags. (Matt)
--- drivers/gpu/drm/xe/display/xe_hdcp_gsc.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)
drivers/gpu/drm/xe/display/xe_hdcp_gsc.c +10 -2
@@ -37,9 +37,17 @@ static bool intel_hdcp_gsc_check_status(struct xe_device *xe =to_xe_device (drm);struct xe_tile *tile =xe_device_get_root_tile (xe);struct xe_gt *gt = tile->media_gt; -struct xe_gsc *gsc = >->uc.gsc; +struct xe_gsc *gsc; -if (!gsc || !xe_uc_fw_is_available (&gsc->fw)) { +if (!gt) { +drm_dbg_kms (&xe->drm, +"not checking GSC status for HDCP2.x: media GT not present or disabled\n" ); +return false; + } + + gsc = >->uc.gsc; + +if (!xe_uc_fw_is_available (&gsc->fw)) {drm_dbg_kms (&xe->drm,"GSC Components not ready for HDCP2.x\n" );return false;
Greg Kroah-Hartman
maintainerPATCH 83/201 spi: mxs: fix controller deregistration
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 8b0d0011af20fb547aa67a1cefbf320992fd5e92 upstream.
Make sure to deregister the controller before releasing underlying resources like DMA during driver unbind.
--- drivers/spi/spi-mxs.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/spi/spi-mxs.c +7 -1
@@ -619,7 +619,7 @@ static int mxs_spi_probe(struct platformif (ret) goto out_pm_runtime_put; - ret =devm_spi_register_controller (&pdev->dev, host); + ret =spi_register_controller (host);if (ret) {dev_err (&pdev->dev,"Cannot register SPI host, %d\n" , ret); goto out_pm_runtime_put;
@@ -650,11 +650,17 @@ static void mxs_spi_remove(struct platfo spi =spi_controller_get_devdata (host); ssp = &spi->ssp; +spi_controller_get (host); + +spi_unregister_controller (host); +pm_runtime_disable (&pdev->dev);if (!pm_runtime_status_suspended (&pdev->dev))mxs_spi_runtime_suspend (&pdev->dev);dma_release_channel (ssp->dmach); + +spi_controller_put (host); }static struct platform_driver mxs_spi_driver = {
Greg Kroah-Hartman
maintainerPATCH 44/201 media: mali-c55: Fully reset the ISP configuration
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jacopo Mondi <[email protected]>
commit 26ad493bea57efdccc32ffedbf731da2b7463b6c upstream.
The Mali C55 driver uses an auto-suspend delay of 2000 milli-seconds.
As the delay is quite large, it is certainly possible that two consecutive calls to enable_streams() do not go through a suspend of the peripheral, meaning we cannot rely on POW register values for the ISP configuration.
To prevent a streaming session to be initialized with settings from the previous one, reset the full ISP configuration to know state disabling or bypassing all the ISP blocks the driver supports.
--- .../platform/arm/mali-c55/mali-c55-params.c | 50 +++++++++++++++++++ 1 file changed, 50 insertions(+)
drivers/media/platform/arm/mali-c55/mali-c55-params.c +50 -0
@@ -781,6 +781,43 @@ void mali_c55_params_init_isp_config(struct mali_c55 *mali_c55,MALI_C55_REG_BYPASS_3_SQUARE_BE , MALI_C55_REG_BYPASS_3_SQUARE_BE); +/* Bypass the sensor offset correction (BLS) module */ +mali_c55_ctx_update_bits (mali_c55,MALI_C55_REG_BYPASS_3 , +MALI_C55_REG_BYPASS_3_SENSOR_OFFSET_PRE_SH , +MALI_C55_REG_BYPASS_3_SENSOR_OFFSET_PRE_SH ); + +/* Configure 1x digital gain. */ +mali_c55_ctx_update_bits (mali_c55,MALI_C55_REG_DIGITAL_GAIN , +MALI_C55_DIGITAL_GAIN_MASK ,256 ); + +/* Set all AWB gains to 1x. at both AWB configuration points*/ +mali_c55_ctx_update_bits (mali_c55,MALI_C55_REG_AWB_GAINS1 , +MALI_C55_AWB_GAIN00_MASK ,256 ); +mali_c55_ctx_update_bits (mali_c55,MALI_C55_REG_AWB_GAINS1 , +MALI_C55_AWB_GAIN01_MASK , +MALI_C55_AWB_GAIN01 (256 )); +mali_c55_ctx_update_bits (mali_c55,MALI_C55_REG_AWB_GAINS2 , +MALI_C55_AWB_GAIN10_MASK ,256 ); +mali_c55_ctx_update_bits (mali_c55,MALI_C55_REG_AWB_GAINS2 , +MALI_C55_AWB_GAIN11_MASK , +MALI_C55_AWB_GAIN11 (256 )); + +mali_c55_ctx_update_bits (mali_c55,MALI_C55_REG_AWB_GAINS1_AEXP , +MALI_C55_AWB_GAIN00_MASK ,256 ); +mali_c55_ctx_update_bits (mali_c55,MALI_C55_REG_AWB_GAINS1_AEXP , +MALI_C55_AWB_GAIN01_MASK , +MALI_C55_AWB_GAIN01 (256 )); +mali_c55_ctx_update_bits (mali_c55,MALI_C55_REG_AWB_GAINS2_AEXP , +MALI_C55_AWB_GAIN10_MASK ,256 ); +mali_c55_ctx_update_bits (mali_c55,MALI_C55_REG_AWB_GAINS2_AEXP , +MALI_C55_AWB_GAIN11_MASK , +MALI_C55_AWB_GAIN11 (256 )); + +/* Bypass mesh shading corrections (LSC). */ +mali_c55_ctx_update_bits (mali_c55,MALI_C55_REG_MESH_SHADING_CONFIG , +MALI_C55_MESH_SHADING_ENABLE_MASK , + false); +/* Bypass the temper module */ mali_c55_ctx_write (mali_c55,MALI_C55_REG_BYPASS_2 ,MALI_C55_REG_BYPASS_2_TEMPER );
@@ -802,6 +839,19 @@ void mali_c55_params_init_isp_config(struct mali_c55 *mali_c55,/* Disable the colour correction matrix */ mali_c55_ctx_write (mali_c55,MALI_C55_REG_CCM_ENABLE ,0 ); + +/* Disable AWB stats. */ +mali_c55_ctx_update_bits (mali_c55,MALI_C55_REG_METERING_CONFIG , +MALI_C55_AWB_DISABLE_MASK , +MALI_C55_AWB_DISABLE_MASK ); + +/* Disable auto-exposure 1024-bin histograms at both tap points. */ +mali_c55_ctx_update_bits (mali_c55,MALI_C55_REG_METERING_CONFIG , +MALI_C55_AEXP_HIST_DISABLE_MASK , +MALI_C55_AEXP_HIST_DISABLE ); +mali_c55_ctx_update_bits (mali_c55,MALI_C55_REG_METERING_CONFIG , +MALI_C55_AEXP_IHIST_DISABLE_MASK , +MALI_C55_AEXP_IHIST_DISABLE ); }void mali_c55_unregister_params (struct mali_c55 *mali_c55)
Signature · 1 line
2.54.0
Greg Kroah-Hartman
maintainerPATCH 45/201 media: intel/ipu6: fix error pointer dereference
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ethan Tidmore <[email protected]>
commit 8dd088b8b106f7b119664f965b691785998edcfb upstream.
In a error path isp->psys is confirmed to be an error pointer not NULL so this condition is true and the error pointer is dereferenced. So isp-psys should be set to NULL before going to out_ipu6_bus_del_devices.
Detected by Smatch:drivers/media/pci/intel/ipu6/ipu6.c:690 ipu6_pci_probe() error:
'isp->psys' dereferencing possible ERR_PTR()
--- drivers/media/pci/intel/ipu6/ipu6.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/media/pci/intel/ipu6/ipu6.c +1 -1
@@ -686,7 +686,7 @@ out_free_irq: out_ipu6_rpm_put:pm_runtime_put_sync (&isp->psys->auxdev.dev); out_ipu6_bus_del_devices: -if (isp->psys) { +if (!IS_ERR_OR_NULL (isp->psys)) {ipu6_cpd_free_pkg_dir (isp->psys);ipu6_buttress_unmap_fw_image (isp->psys, &isp->psys->fw_sgt); }
Greg Kroah-Hartman
maintainerPATCH 46/201 media: i2c: imx283: Fix hang when going from large to small resolution
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jai Luthra <[email protected]>
commit 9206359b2c396ff594adf39bc7daaadab0fcb367 upstream.
When switching between modes (e.g. full resolution to binned), standby_cancel() previously cleared XMSTA (starting master mode data output) before the new mode's MDSEL, crop, and timing registers were programmed in start_streaming(). This caused the sensor to briefly output MIPI data using the previous mode's configuration.
On receivers like imx-mipi-csis, this leads to FIFO overflow errors when switching from a higher to a lower resolution, as the receiver is configured for the new smaller frame size but receives stale full-resolution data.
Fix this by moving the XMSTA and SYNCDRV register writes from standby_cancel() to the end of start_streaming(), after all mode, crop, and timing registers have been configured. Also explicitly stop master mode (XMSTA=1) when stopping the stream, matching the pattern used by other Sony sensor drivers (imx290, imx415).
Use named macros IMX283_XMSTA_START/STOP instead of raw 0/BIT(0) for readability.
--- drivers/media/i2c/imx283.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-)
drivers/media/i2c/imx283.c +10 -5
@@ -129,7 +129,8 @@/* Master Mode Operation Control */ #define IMX283_REG_XMSTA CCI_REG8(0x3105) -#define IMX283_XMSTA BIT(0) +#define IMX283_XMSTA_START 0 +#define IMX283_XMSTA_STOP BIT(0)#define IMX283_REG_SYNCDRV CCI_REG8(0x3107)#define IMX283_SYNCDRV_XHS_XVS (0xa0 | 0x02)
@@ -1023,8 +1024,6 @@ static int imx283_standby_cancel(structusleep_range (19000 ,20000 );cci_write (imx283->cci,IMX283_REG_CLAMP ,IMX283_CLPSQRST , &ret); -cci_write (imx283->cci,IMX283_REG_XMSTA ,0 , &ret); -cci_write (imx283->cci,IMX283_REG_SYNCDRV ,IMX283_SYNCDRV_XHS_XVS , &ret);return ret; }
@@ -1117,6 +1116,10 @@ static int imx283_start_streaming(struct/* Apply customized values from controls (HMAX/VMAX/SHR) */ ret =__v4l2_ctrl_handler_setup (imx283->sd.ctrl_handler); +/* Start master mode */ +cci_write (imx283->cci,IMX283_REG_XMSTA ,IMX283_XMSTA_START , &ret); +cci_write (imx283->cci,IMX283_REG_SYNCDRV ,IMX283_SYNCDRV_XHS_XVS , &ret); +return ret; }
@@ -1153,12 +1156,14 @@ static int imx283_disable_streams(struct u64 streams_mask) {struct imx283 *imx283 =to_imx283 (sd); -int ret; +int ret =0 ;if (pad !=IMAGE_PAD )return -EINVAL ; - ret =cci_write (imx283->cci,IMX283_REG_STANDBY ,IMX283_STANDBY ,NULL ); +cci_write (imx283->cci,IMX283_REG_XMSTA ,IMX283_XMSTA_STOP , &ret); +cci_write (imx283->cci,IMX283_REG_STANDBY ,IMX283_STANDBY , &ret); +if (ret)dev_err (imx283->dev,"Failed to stop stream\n" );
Greg Kroah-Hartman
maintainerPATCH 47/201 regulator: act8945a: fix OF node reference imbalance
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 0d15ce31375ccef4162f960b34547a821b7619d2 upstream.
The driver reuses the OF node of the parent multi-function device but fails to take another reference to balance the one dropped by the platform bus code when unbinding the MFD and deregistering the child devices.
Fix this by using the intended helper for reusing OF nodes.
--- drivers/regulator/act8945a-regulator.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/regulator/act8945a-regulator.c +2 -1
@@ -302,8 +302,9 @@ static int act8945a_pmic_probe(struct pl num_regulators =ARRAY_SIZE (act8945a_regulators); } +device_set_of_node_from_dev (&pdev->dev, pdev->dev.parent); + config.dev = &pdev->dev; - config.dev->of_node = pdev->dev.parent->of_node; config.driver_data = act8945a;for (i =0 ; i < num_regulators; i++) { rdev = devm_regulator_register(&pdev->dev, ®ulators[i],
Greg Kroah-Hartman
maintainerPATCH 48/201 regulator: s2dos05: fix OF node reference imbalance
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit ebe694d67f159899b063eee61bacda4cb825ed7b upstream.
The driver reuses the OF node of the parent multi-function device but fails to take another reference to balance the one dropped by the platform bus code when unbinding the MFD and deregistering the child devices.
Fix this by using the intended helper for reusing OF nodes.
--- drivers/regulator/s2dos05-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/regulator/s2dos05-regulator.c +1 -1
@@ -126,7 +126,7 @@ static int s2dos05_pmic_probe(struct pla s2dos05->regmap = iodev->regmap_pmic; s2dos05->dev = dev;if (!dev->of_node) - dev->of_node = dev->parent->of_node; +device_set_of_node_from_dev (dev, dev->parent); config.dev = dev; config.driver_data = s2dos05;
Greg Kroah-Hartman
maintainerPATCH 39/201 media: i2c: imx283: Enter full standby when stopping streaming
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jai Luthra <[email protected]>
commit bce1349dbf6348ddee47308e2ed08878356de317 upstream.
Use IMX283_STANDBY (bit 0) instead of IMX283_STBLOGIC (bit 1) when stopping streaming. STBLOGIC only puts the sensor logic into standby but leaves the MIPI interface (along with other components) in an indeterminate state.
This (presumably) causes the CSI receiver (e.g. Raspberry Pi's CFE) to miss the LP-11 to HS transition when streaming restarts, resulting in a hang of 10+ seconds. The issue is most visible when immediately restarting a full-resolution stream after stopping a 3x3 binned one, so that runtime suspend hasn't yet been triggered.
Writing IMX283_STANDBY puts the entire sensor into standby. The imx283_standby_cancel() sequence already handles the full wakeup from this suspended state.
--- drivers/media/i2c/imx283.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/media/i2c/imx283.c +1 -1
@@ -1158,7 +1158,7 @@ static int imx283_disable_streams(structif (pad !=IMAGE_PAD )return -EINVAL ; - ret =cci_write (imx283->cci,IMX283_REG_STANDBY ,IMX283_STBLOGIC ,NULL ); + ret =cci_write (imx283->cci,IMX283_REG_STANDBY ,IMX283_STANDBY ,NULL );if (ret)dev_err (imx283->dev,"Failed to stop stream\n" );
Greg Kroah-Hartman
maintainerPATCH 85/201 spi: dln2: fix controller deregistration
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit c353020fbfa8514ee91a6de2d88de4e5edca5803 upstream.
Make sure to deregister the controller before disabling it to allow SPI device drivers to do I/O during deregistration.
--- drivers/spi/spi-dln2.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/spi/spi-dln2.c +7 -1
@@ -758,7 +758,7 @@ static int dln2_spi_probe(struct platforpm_runtime_set_active (&pdev->dev);pm_runtime_enable (&pdev->dev); - ret =devm_spi_register_controller (&pdev->dev, host); + ret =spi_register_controller (host);if (ret <0 ) {dev_err (&pdev->dev,"Failed to register host\n" ); goto exit_register;
@@ -783,10 +783,16 @@ static void dln2_spi_remove(struct platfstruct spi_controller *host =platform_get_drvdata (pdev);struct dln2_spi *dln2 =spi_controller_get_devdata (host); +spi_controller_get (host); + +spi_unregister_controller (host); +pm_runtime_disable (&pdev->dev);if (dln2_spi_enable (dln2, false) <0 )dev_err (&pdev->dev,"Failed to disable SPI module\n" ); + +spi_controller_put (host); }#ifdef CONFIG_PM_SLEEP
Greg Kroah-Hartman
maintainerPATCH 94/201 spi: sh-hspi: fix controller deregistration
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit e63982e6392e45a6ecd68d6c317a081cc8e70143 upstream.
Make sure to deregister the controller before releasing underlying resources like clocks during driver unbind.
--- drivers/spi/spi-sh-hspi.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
drivers/spi/spi-sh-hspi.c +8 -2
@@ -257,9 +257,9 @@ static int hspi_probe(struct platform_de ctlr->transfer_one_message = hspi_transfer_one_message; ctlr->bits_per_word_mask =SPI_BPW_MASK (8 ); - ret =devm_spi_register_controller (&pdev->dev, ctlr); + ret =spi_register_controller (ctlr);if (ret <0 ) { -dev_err (&pdev->dev,"devm_spi_register_controller error.\n" ); +dev_err (&pdev->dev,"failed to register controller\n" ); goto error2; }
@@ -279,9 +279,15 @@ static void hspi_remove(struct platform_ {struct hspi_priv *hspi =platform_get_drvdata (pdev); +spi_controller_get (hspi->ctlr); + +spi_unregister_controller (hspi->ctlr); +pm_runtime_disable (&pdev->dev);clk_put (hspi->clk); + +spi_controller_put (hspi->ctlr); }static const struct of_device_id hspi_of_match[] = {
Greg Kroah-Hartman
maintainerPATCH 95/201 spi: fsl: fix controller deregistration
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 9b7abfed4c3754062d1f3ffd452e65a38667f586 upstream.
Make sure to deregister the controller before releasing underlying resources like DMA during driver unbind.
--- drivers/spi/spi-fsl-spi.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-)
drivers/spi/spi-fsl-spi.c +13 -1
@@ -614,7 +614,7 @@ static struct spi_controller *fsl_spi_prmpc8xxx_spi_write_reg (®_base->mode, regval); - ret =devm_spi_register_controller (dev, host); + ret =spi_register_controller (host);if (ret <0 ) goto err_probe;
@@ -705,7 +705,13 @@ static void of_fsl_spi_remove(struct plastruct spi_controller *host =platform_get_drvdata (ofdev);struct mpc8xxx_spi *mpc8xxx_spi =spi_controller_get_devdata (host); +spi_controller_get (host); + +spi_unregister_controller (host); +fsl_spi_cpm_free (mpc8xxx_spi); + +spi_controller_put (host); }static struct platform_driver of_fsl_spi_driver = {
@@ -751,7 +757,13 @@ static void plat_mpc8xxx_spi_remove(strustruct spi_controller *host =platform_get_drvdata (pdev);struct mpc8xxx_spi *mpc8xxx_spi =spi_controller_get_devdata (host); +spi_controller_get (host); + +spi_unregister_controller (host); +fsl_spi_cpm_free (mpc8xxx_spi); + +spi_controller_put (host); }MODULE_ALIAS ("platform:mpc8xxx_spi" );
Greg Kroah-Hartman
maintainerPATCH 96/201 spi: bcmbca-hsspi: fix controller deregistration
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit c3d97c3320b9a1ebbd6119857341be034f7b3efc upstream.
Make sure to deregister the controller before disabling underlying resources like interrupts during driver unbind to allow SPI drivers to do I/O during deregistration.
Note that clocks were also disabled before the recent commit e532e21a246d ("spi: bcm63xx-hsspi: Simplify clock handling with devm_clk_get_enabled()").
--- drivers/spi/spi-bcmbca-hsspi.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/spi/spi-bcmbca-hsspi.c +3 -1
@@ -549,7 +549,7 @@ static int bcmbca_hsspi_probe(struct pla }/* register and we are done */ - ret =devm_spi_register_controller (dev, host); + ret =spi_register_controller (host);if (ret) goto out_sysgroup_disable;
@@ -571,6 +571,8 @@ static void bcmbca_hsspi_remove(struct pstruct spi_controller *host =platform_get_drvdata (pdev);struct bcmbca_hsspi *bs =spi_controller_get_devdata (host); +spi_unregister_controller (host); +/* reset the hardware and block queue progress */ __raw_writel (0 , bs->regs +HSSPI_INT_MASK_REG );clk_disable_unprepare (bs->pll_clk);
Greg Kroah-Hartman
maintainerPATCH 97/201 spi: coldfire-qspi: fix controller deregistration
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit e7c510e192ff2a1264d999575eea39a506424264 upstream.
Make sure to deregister the controller before disabling underlying resources like clocks (via runtime pm) during driver unbind.
--- drivers/spi/spi-coldfire-qspi.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
drivers/spi/spi-coldfire-qspi.c +8 -2
@@ -410,9 +410,9 @@ static int mcfqspi_probe(struct platformplatform_set_drvdata (pdev, host);pm_runtime_enable (&pdev->dev); - status =devm_spi_register_controller (&pdev->dev, host); + status =spi_register_controller (host);if (status) { -dev_dbg (&pdev->dev,"devm_spi_register_controller failed\n" ); +dev_dbg (&pdev->dev,"failed to register controller\n" ); goto fail1; }
@@ -436,11 +436,17 @@ static void mcfqspi_remove(struct platfostruct spi_controller *host =platform_get_drvdata (pdev);struct mcfqspi *mcfqspi =spi_controller_get_devdata (host); +spi_controller_get (host); + +spi_unregister_controller (host); +pm_runtime_disable (&pdev->dev);/* disable the hardware (set the baud rate to 0) */ mcfqspi_wr_qmr (mcfqspi,MCFQSPI_QMR_MSTR );mcfqspi_cs_teardown (mcfqspi); + +spi_controller_put (host); }#ifdef CONFIG_PM_SLEEP
Greg Kroah-Hartman
maintainerPATCH 98/201 spi: npcm-pspi: fix controller deregistration
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit ebd81199e00e107980bf8c4d2c747ae50158f797 upstream.
Make sure to deregister the controller before disabling underlying resources like clocks during driver unbind.
--- drivers/spi/spi-npcm-pspi.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/spi/spi-npcm-pspi.c +7 -1
@@ -413,7 +413,7 @@ static int npcm_pspi_probe(struct platfo/* set to default clock rate */ npcm_pspi_set_baudrate (priv,NPCM_PSPI_DEFAULT_CLK ); - ret =devm_spi_register_controller (&pdev->dev, host); + ret =spi_register_controller (host);if (ret) goto out_disable_clk;
@@ -434,8 +434,14 @@ static void npcm_pspi_remove(struct platstruct spi_controller *host =platform_get_drvdata (pdev);struct npcm_pspi *priv =spi_controller_get_devdata (host); +spi_controller_get (host); + +spi_unregister_controller (host); +npcm_pspi_reset_hw (priv);clk_disable_unprepare (priv->clk); + +spi_controller_put (host); }static const struct of_device_id npcm_pspi_match[] = {
Greg Kroah-Hartman
maintainerPATCH 99/201 spi: cavium-thunderx: fix controller deregistration
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit dbb6b01267c0c866eaac4019cec19f414beec61d upstream.
Make sure to deregister the controller before disabling it to avoid hanging or leaking resources associated with the queue when the queue non-empty.
--- drivers/spi/spi-cavium-thunderx.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/spi/spi-cavium-thunderx.c +7 -1
@@ -70,7 +70,7 @@ static int thunderx_spi_probe(struct pcipci_set_drvdata (pdev, host); - ret =devm_spi_register_controller (dev, host); + ret =spi_register_controller (host);if (ret) goto error;
@@ -90,8 +90,14 @@ static void thunderx_spi_remove(struct pif (!p)return ; +spi_controller_get (host); + +spi_unregister_controller (host); +/* Put everything in a known state. */ writeq (0 , p->register_base +OCTEON_SPI_CFG (p)); + +spi_controller_put (host); }static const struct pci_device_id thunderx_spi_pci_id_table[] = {
Greg Kroah-Hartman
maintainerPATCH 100/201 spi: pic32-sqi: fix controller deregistration
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 420df79d1a618951eb0eb4331df95c9f4f763b8b upstream.
Make sure to deregister the controller before releasing underlying resources like DMA during driver unbind.
--- drivers/spi/spi-pic32-sqi.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/spi/spi-pic32-sqi.c +7 -1
@@ -642,7 +642,7 @@ static int pic32_sqi_probe(struct platfo host->prepare_transfer_hardware = pic32_sqi_prepare_hardware; host->unprepare_transfer_hardware = pic32_sqi_unprepare_hardware; - ret =devm_spi_register_controller (&pdev->dev, host); + ret =spi_register_controller (host);if (ret) {dev_err (&host->dev,"failed registering spi host\n" );free_irq (sqi->irq, sqi);
@@ -665,9 +665,15 @@ static void pic32_sqi_remove(struct plat {struct pic32_sqi *sqi =platform_get_drvdata (pdev); +spi_controller_get (sqi->host); + +spi_unregister_controller (sqi->host); +/* release resources */ free_irq (sqi->irq, sqi);ring_desc_ring_free (sqi); + +spi_controller_put (sqi->host); }static const struct of_device_id pic32_sqi_of_ids[] = {
Greg Kroah-Hartman
maintainerPATCH 101/201 spi: sprd: fix controller deregistration
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 123d17dbc5f07059752fa5e616385ca29a8f935a upstream.
Make sure to deregister the controller before disabling underlying resources like clocks during driver unbind.
Note that the controller is suspended before disabling and releasing resources since commit de082d866cce ("spi: sprd: Add the SPI irq function for the SPI DMA mode") which avoids issues like unclocked accesses but prevents SPI device drivers from doing I/O during deregistration.
--- drivers/spi/spi-sprd.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/spi/spi-sprd.c +6 -2
@@ -977,7 +977,7 @@ static int sprd_spi_probe(struct platfor goto err_rpm_put; } - ret =devm_spi_register_controller (&pdev->dev, sctlr); + ret =spi_register_controller (sctlr);if (ret) goto err_rpm_put;
@@ -1008,7 +1008,9 @@ static void sprd_spi_remove(struct platfif (ret <0 )dev_err (ss->dev,"failed to resume SPI controller\n" ); -spi_controller_suspend (sctlr); +spi_controller_get (sctlr); + +spi_unregister_controller (sctlr);if (ret >=0 ) {if (ss->dma.enable)
@@ -1017,6 +1019,8 @@ static void sprd_spi_remove(struct platf }pm_runtime_put_noidle (&pdev->dev);pm_runtime_disable (&pdev->dev); + +spi_controller_put (sctlr); }static int __maybe_unused sprd_spi_runtime_suspend (struct device *dev)
Greg Kroah-Hartman
maintainerPATCH 102/201 spi: rspi: fix controller deregistration
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 9944fa6726afb1e6eb7e2212764e7da0c97f2dcc upstream.
Make sure to deregister the controller before releasing underlying resources like DMA during driver unbind.
--- drivers/spi/spi-rspi.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
drivers/spi/spi-rspi.c +8 -2
@@ -1171,8 +1171,14 @@ static void rspi_remove(struct platform_ {struct rspi_data *rspi =platform_get_drvdata (pdev); +spi_controller_get (rspi->ctlr); + +spi_unregister_controller (rspi->ctlr); +rspi_release_dma (rspi->ctlr);pm_runtime_disable (&pdev->dev); + +spi_controller_put (rspi->ctlr); }static const struct spi_ops rspi_ops = {
@@ -1376,9 +1382,9 @@ static int rspi_probe(struct platform_deif (ret <0 )dev_warn (&pdev->dev,"DMA not available, using PIO\n" ); - ret =devm_spi_register_controller (&pdev->dev, ctlr); + ret =spi_register_controller (ctlr);if (ret <0 ) { -dev_err (&pdev->dev,"devm_spi_register_controller error.\n" ); +dev_err (&pdev->dev,"failed to register controller\n" ); goto error3; }
Greg Kroah-Hartman
maintainerPATCH 103/201 spi: sh-msiof: fix controller deregistration
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 45170f67a08b912ead6ccc387ba06954d1d4e53a upstream.
Make sure to deregister the controller before releasing underlying resources like DMA during driver unbind.
--- drivers/spi/spi-sh-msiof.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
drivers/spi/spi-sh-msiof.c +8 -2
@@ -1289,9 +1289,9 @@ static int sh_msiof_spi_probe(struct plaif (ret <0 )dev_warn (dev,"DMA not available, using PIO\n" ); - ret =devm_spi_register_controller (dev, ctlr); + ret =spi_register_controller (ctlr);if (ret <0 ) { -dev_err (dev,"devm_spi_register_controller error.\n" ); +dev_err (dev,"failed to register controller\n" ); goto err2; }
@@ -1309,8 +1309,14 @@ static void sh_msiof_spi_remove(struct p {struct sh_msiof_spi_priv *p =platform_get_drvdata (pdev); +spi_controller_get (p->ctlr); + +spi_unregister_controller (p->ctlr); +sh_msiof_release_dma (p);pm_runtime_disable (&pdev->dev); + +spi_controller_put (p->ctlr); }static const struct platform_device_id spi_driver_ids[] = {
Greg Kroah-Hartman
maintainerPATCH 86/201 spi: s3c64xx: fix controller deregistration
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit c1446b61e472da24d1547525193467b4bea4a7cb upstream.
Make sure to deregister the controller before releasing underlying resources like DMA during driver unbind.
--- drivers/spi/spi-s3c64xx.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/spi/spi-s3c64xx.c +3 -1
@@ -1369,7 +1369,7 @@ static int s3c64xx_spi_probe(struct platS3C64XX_SPI_INT_TX_OVERRUN_EN |S3C64XX_SPI_INT_TX_UNDERRUN_EN , sdd->regs + S3C64XX_SPI_INT_EN); - ret =devm_spi_register_controller (&pdev->dev, host); + ret =spi_register_controller (host);if (ret !=0 ) {dev_err (&pdev->dev,"cannot register SPI host: %d\n" , ret); goto err_pm_put;
@@ -1399,6 +1399,8 @@ static void s3c64xx_spi_remove(struct plpm_runtime_get_sync (&pdev->dev); +spi_unregister_controller (host); +writel (0 , sdd->regs +S3C64XX_SPI_INT_EN );pm_runtime_put_noidle (&pdev->dev);
Greg Kroah-Hartman
maintainerPATCH 104/201 spi: slave-mt27xx: fix controller deregistration
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit ab840cbda4fe6c40e52f6415c47056797c663bb2 upstream.
Make sure to deregister the controller before disabling underlying resources like clocks (by disabling runtime PM) during driver unbind.
--- drivers/spi/spi-slave-mt27xx.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
drivers/spi/spi-slave-mt27xx.c +9 -1
@@ -453,7 +453,7 @@ static int mtk_spi_slave_probe(struct plpm_runtime_enable (&pdev->dev); - ret =devm_spi_register_controller (&pdev->dev, ctlr); + ret =spi_register_controller (ctlr);clk_disable_unprepare (mdata->spi_clk);if (ret) { dev_err(&pdev->dev,
@@ -473,7 +473,15 @@ err_put_ctlr:static void mtk_spi_slave_remove (struct platform_device *pdev) { +struct spi_controller *ctlr =platform_get_drvdata (pdev); + +spi_controller_get (ctlr); + +spi_unregister_controller (ctlr); +pm_runtime_disable (&pdev->dev); + +spi_controller_put (ctlr); }#ifdef CONFIG_PM_SLEEP
Greg Kroah-Hartman
maintainerPATCH 105/201 spi: img-spfi: fix controller deregistration
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit fc3a83b0d9c16b941c9028f5a8db9541dce4ddf2 upstream.
Make sure to deregister the controller before disabling and releasing underlying resources like clocks and DMA during driver unbind.
--- drivers/spi/spi-img-spfi.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/spi/spi-img-spfi.c +7 -1
@@ -643,7 +643,7 @@ static int img_spfi_probe(struct platforpm_runtime_set_active (spfi->dev);pm_runtime_enable (spfi->dev); - ret =devm_spi_register_controller (spfi->dev, host); + ret =spi_register_controller (host);if (ret) goto disable_pm;
@@ -669,6 +669,10 @@ static void img_spfi_remove(struct platfstruct spi_controller *host =platform_get_drvdata (pdev);struct img_spfi *spfi =spi_controller_get_devdata (host); +spi_controller_get (host); + +spi_unregister_controller (host); +if (spfi->tx_ch)dma_release_channel (spfi->tx_ch);if (spfi->rx_ch)
@@ -679,6 +683,8 @@ static void img_spfi_remove(struct platfclk_disable_unprepare (spfi->spfi_clk);clk_disable_unprepare (spfi->sys_clk); } + +spi_controller_put (host); }#ifdef CONFIG_PM
Greg Kroah-Hartman
maintainerPATCH 106/201 spi: mpfs: fix controller deregistration
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 573c7db8fce91a1b07dd64a260bb44b9e6d05943 upstream.
Make sure to deregister the controller before disabling underlying resources like interrupts during driver unbind.
--- drivers/spi/spi-mpfs.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/spi/spi-mpfs.c +3 -1
@@ -574,7 +574,7 @@ static int mpfs_spi_probe(struct platformpfs_spi_init (host, spi); - ret =devm_spi_register_controller (&pdev->dev, host); + ret =spi_register_controller (host);if (ret) {mpfs_spi_disable_ints (spi);mpfs_spi_disable (spi);
@@ -592,6 +592,8 @@ static void mpfs_spi_remove(struct platfstruct spi_controller *host =platform_get_drvdata (pdev);struct mpfs_spi *spi =spi_controller_get_devdata (host); +spi_unregister_controller (host); +mpfs_spi_disable_ints (spi);mpfs_spi_disable (spi); }
Greg Kroah-Hartman
maintainerPATCH 107/201 spi: octeon: fix controller deregistration
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 3c49a4d8799bee423a80f392ba95b26af8e9ab91 upstream.
Make sure to deregister the controller before disabling it to avoid hanging or leaking resources associated with the queue when the queue is non-empty.
--- drivers/spi/spi-cavium-octeon.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/spi/spi-cavium-octeon.c +7 -1
@@ -54,7 +54,7 @@ static int octeon_spi_probe(struct platf host->bits_per_word_mask =SPI_BPW_MASK (8 ); host->max_speed_hz =OCTEON_SPI_MAX_CLOCK_HZ ; - err =devm_spi_register_controller (&pdev->dev, host); + err =spi_register_controller (host);if (err) {dev_err (&pdev->dev,"register host failed: %d\n" , err); goto fail;
@@ -73,8 +73,14 @@ static void octeon_spi_remove(struct plastruct spi_controller *host =platform_get_drvdata (pdev);struct octeon_spi *p =spi_controller_get_devdata (host); +spi_controller_get (host); + +spi_unregister_controller (host); +/* Clear the CSENA* and put everything in a known state. */ writeq (0 , p->register_base +OCTEON_SPI_CFG (p)); + +spi_controller_put (host); }static const struct of_device_id octeon_spi_match[] = {
Greg Kroah-Hartman
maintainerPATCH 108/201 spi: imx: fix runtime pm leak on probe deferral
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit a1d50a37d3b1df84f536a982f692371039df4a48 upstream.
Make sure to balance the runtime PM usage count before returning on probe failure (e.g. probe deferral) so that the controller can be suspended when a driver is later bound.
--- drivers/spi/spi-imx.c | 1 + 1 file changed, 1 insertion(+)
drivers/spi/spi-imx.c +1 -0
@@ -2384,6 +2384,7 @@ out_register_controller: out_runtime_pm_put:pm_runtime_dont_use_autosuspend (spi_imx->dev);pm_runtime_disable (spi_imx->dev); +pm_runtime_put_noidle (spi_imx->dev);pm_runtime_set_suspended (&pdev->dev);clk_disable_unprepare (spi_imx->clk_ipg);
Greg Kroah-Hartman
maintainerPATCH 109/201 spi: mxic: fix controller deregistration
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit adbc595e272052181d40ec307a4c5ba98571b0fe upstream.
Make sure to deregister the controller before disabling underlying resources like clocks (via runtime pm) during driver unbind.
--- drivers/spi/spi-mxic.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/spi/spi-mxic.c +2 -1
@@ -832,9 +832,10 @@ static void mxic_spi_remove(struct platfstruct spi_controller *host =platform_get_drvdata (pdev);struct mxic_spi *mxic =spi_controller_get_devdata (host); +spi_unregister_controller (host); +pm_runtime_disable (&pdev->dev);mxic_spi_mem_ecc_remove (mxic); -spi_unregister_controller (host); }static const struct of_device_id mxic_spi_of_ids[] = {
Greg Kroah-Hartman
maintainerPATCH 110/201 spi: orion: fix controller deregistration
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 220f4f11104a7f83b71543ef0e48dde1da2bc5d3 upstream.
Make sure to deregister the controller before disabling underlying resources like clocks during driver unbind.
--- drivers/spi/spi-orion.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/spi/spi-orion.c +6 -1
@@ -801,10 +801,15 @@ static void orion_spi_remove(struct platstruct spi_controller *host =platform_get_drvdata (pdev);struct orion_spi *spi =spi_controller_get_devdata (host); +spi_controller_get (host); + +spi_unregister_controller (host); +pm_runtime_get_sync (&pdev->dev);clk_disable_unprepare (spi->axi_clk); -spi_unregister_controller (host); +spi_controller_put (host); +pm_runtime_disable (&pdev->dev); }
Greg Kroah-Hartman
maintainerPATCH 111/201 spi: orion: fix runtime pm leak on unbind
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 97b17dd8266d2e26d9ee3c75a0fa34ecde6944f0 upstream.
Make sure to balance the runtime PM usage count on driver unbind so that the controller can be suspended when a driver is rebound.
Also restore the autosuspend setting.
This issue was flagged by Sashiko when reviewing a controller deregistration fix.
--- drivers/spi/spi-orion.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/spi/spi-orion.c +3 -0
@@ -811,6 +811,9 @@ static void orion_spi_remove(struct platspi_controller_put (host);pm_runtime_disable (&pdev->dev); +pm_runtime_put_noidle (&pdev->dev); +pm_runtime_set_suspended (&pdev->dev); +pm_runtime_dont_use_autosuspend (&pdev->dev); }MODULE_ALIAS ("platform:" DRIVER_NAME );
Greg Kroah-Hartman
maintainerPATCH 112/201 spi: orion: fix clock imbalance on registration failure
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 443cde0dc59c5d154156ac9f27a7dadef8ebc0c2 upstream.
Make sure that the controller is not runtime suspended before disabling clocks on probe failure.
Also restore the autosuspend setting.
--- drivers/spi/spi-orion.c | 6 ++++++ 1 file changed, 6 insertions(+)
drivers/spi/spi-orion.c +6 -0
@@ -774,6 +774,7 @@ static int orion_spi_probe(struct platfopm_runtime_set_active (&pdev->dev);pm_runtime_use_autosuspend (&pdev->dev);pm_runtime_set_autosuspend_delay (&pdev->dev,SPI_AUTOSUSPEND_TIMEOUT ); +pm_runtime_get_noresume (&pdev->dev);pm_runtime_enable (&pdev->dev); status =orion_spi_reset (spi);
@@ -784,10 +785,15 @@ static int orion_spi_probe(struct platfoif (status <0 ) goto out_rel_pm; +pm_runtime_put_autosuspend (&pdev->dev); +return status; out_rel_pm:pm_runtime_disable (&pdev->dev); +pm_runtime_put_noidle (&pdev->dev); +pm_runtime_set_suspended (&pdev->dev); +pm_runtime_dont_use_autosuspend (&pdev->dev); out_rel_axi_clk:clk_disable_unprepare (spi->axi_clk); out:
Greg Kroah-Hartman
maintainerPATCH 113/201 spi: mpc52xx: fix use-after-free on registration failure
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit f62c060272b9d7423b1650b844e8e4e7b8f9f925 upstream.
Make sure to disable and free the interrupts in case controller registration fails to avoid a potential use-after-free and resource leak.
This issue was flagged by Sashiko when reviewing a controller deregistration fix.
--- drivers/spi/spi-mpc52xx.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/spi/spi-mpc52xx.c +3 -0
@@ -498,6 +498,9 @@ static int mpc52xx_spi_probe(struct plat err_register:dev_err (&ms->host->dev,"initialization failed\n" ); +free_irq (ms->irq0, ms); +free_irq (ms->irq1, ms); +cancel_work_sync (&ms->work); err_gpio:while (i-- >0 )gpiod_put (ms->gpio_cs[i]);
Greg Kroah-Hartman
maintainerPATCH 87/201 spi: fsl-espi: fix controller deregistration
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit e506a700a7ad229f5c8f01f4b8350119cccb4158 upstream.
Make sure to deregister the controller before disabling runtime PM (which can leave the controller disabled) to allow SPI device drivers to do I/O during deregistration.
--- drivers/spi/spi-fsl-espi.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
drivers/spi/spi-fsl-espi.c +9 -1
@@ -718,7 +718,7 @@ static int fsl_espi_probe(struct devicepm_runtime_enable (dev);pm_runtime_get_sync (dev); - ret =devm_spi_register_controller (dev, host); + ret =spi_register_controller (host);if (ret <0 ) goto err_pm;
@@ -782,7 +782,15 @@ static int of_fsl_espi_probe(struct platstatic void of_fsl_espi_remove (struct platform_device *dev) { +struct spi_controller *host =platform_get_drvdata (dev); + +spi_controller_get (host); + +spi_unregister_controller (host); +pm_runtime_disable (&dev->dev); + +spi_controller_put (host); }#ifdef CONFIG_PM_SLEEP
Greg Kroah-Hartman
maintainerPATCH 114/201 spi: mpc52xx: fix controller deregistration
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 0f997fdae819a8c2cc83bd4ff7d935ad76c727c9 upstream.
Make sure to deregister the controller before disabling and releasing underlying resources like interrupts and gpios during driver unbind.
--- drivers/spi/spi-mpc52xx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/spi/spi-mpc52xx.c +2 -1
@@ -520,6 +520,8 @@ static void mpc52xx_spi_remove(struct plstruct mpc52xx_spi *ms =spi_controller_get_devdata (host);int i; +spi_unregister_controller (host); +cancel_work_sync (&ms->work);free_irq (ms->irq0, ms);free_irq (ms->irq1, ms);
@@ -528,7 +530,6 @@ static void mpc52xx_spi_remove(struct plgpiod_put (ms->gpio_cs[i]);kfree (ms->gpio_cs); -spi_unregister_controller (host);iounmap (ms->regs);spi_controller_put (host); }
Greg Kroah-Hartman
maintainerPATCH 115/201 spi: mpc52xx: fix use-after-free on unbind
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 706b3dc2ac7a998c55e14b3fd2e8f934c367e6e0 upstream.
The state machine work is scheduled by the interrupt handler and therefore needs to be cancelled after disabling interrupts to avoid a potential use-after-free.
--- drivers/spi/spi-mpc52xx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/spi/spi-mpc52xx.c +2 -1
@@ -522,10 +522,11 @@ static void mpc52xx_spi_remove(struct plspi_unregister_controller (host); -cancel_work_sync (&ms->work);free_irq (ms->irq0, ms);free_irq (ms->irq1, ms); +cancel_work_sync (&ms->work); +for (i =0 ; i < ms->gpio_cs_count; i++)gpiod_put (ms->gpio_cs[i]);
Greg Kroah-Hartman
maintainerPATCH 116/201 spi: cadence: fix controller deregistration
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 666fa7e9ca98e71c880086ca24147ae843f1ed6e upstream.
Make sure to deregister the controller before disabling underlying resources like clocks during driver unbind.
--- drivers/spi/spi-cadence.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/spi/spi-cadence.c +5 -1
@@ -777,6 +777,10 @@ static void cdns_spi_remove(struct platfstruct spi_controller *ctlr =platform_get_drvdata (pdev);struct cdns_spi *xspi =spi_controller_get_devdata (ctlr); +spi_controller_get (ctlr); + +spi_unregister_controller (ctlr); +cdns_spi_write (xspi,CDNS_SPI_ER ,CDNS_SPI_ER_DISABLE );if (!spi_controller_is_target (ctlr)) {
@@ -784,7 +788,7 @@ static void cdns_spi_remove(struct platfpm_runtime_set_suspended (&pdev->dev); } -spi_unregister_controller (ctlr); +spi_controller_put (ctlr); }/**
Greg Kroah-Hartman
maintainerPATCH 117/201 spi: cadence-quadspi: fix controller deregistration
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 964ee9793760e825b5c011741b4e3cfe06c87efc upstream.
Make sure to deregister the controller before dropping the reference count that allows new operations to start to allow SPI drivers to do I/O during deregistration.
--- drivers/spi/spi-cadence-quadspi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/spi/spi-cadence-quadspi.c +2 -2
@@ -2020,13 +2020,13 @@ static void cqspi_remove(struct platform ddata =of_device_get_match_data (dev); +spi_unregister_controller (cqspi->host); +refcount_set (&cqspi->refcount,0 );if (!refcount_dec_and_test (&cqspi->inflight_ops))cqspi_wait_idle (cqspi); -spi_unregister_controller (cqspi->host); -if (cqspi->rx_chan)dma_release_channel (cqspi->rx_chan);
Greg Kroah-Hartman
maintainerPATCH 118/201 spi: cadence: fix unclocked access on unbind
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 5b1689a41f02955c5361944f748a4812a6ff9307 upstream.
Make sure that the controller is runtime resumed before disabling it during driver unbind to avoid unclocked register access and unbalanced clock disable.
Also restore the autosuspend setting.
This issue was flagged by Sashiko when reviewing a controller deregistration fix.
--- drivers/spi/spi-cadence.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/spi/spi-cadence.c +8 -1
@@ -776,16 +776,23 @@ static void cdns_spi_remove(struct platf {struct spi_controller *ctlr =platform_get_drvdata (pdev);struct cdns_spi *xspi =spi_controller_get_devdata (ctlr); +int ret =0 ; + +if (!spi_controller_is_target (ctlr)) + ret =pm_runtime_get_sync (&pdev->dev);spi_controller_get (ctlr);spi_unregister_controller (ctlr); -cdns_spi_write (xspi,CDNS_SPI_ER ,CDNS_SPI_ER_DISABLE ); +if (ret >=0 ) +cdns_spi_write (xspi,CDNS_SPI_ER ,CDNS_SPI_ER_DISABLE );if (!spi_controller_is_target (ctlr)) {pm_runtime_disable (&pdev->dev);pm_runtime_set_suspended (&pdev->dev); +pm_runtime_put_noidle (&pdev->dev); +pm_runtime_dont_use_autosuspend (&pdev->dev); }spi_controller_put (ctlr);
Greg Kroah-Hartman
maintainerPATCH 119/201 spi: cadence: fix clock imbalance on probe failure
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit ecea4f0e9db2fb6ab4a68a59c5aba0d8f59a9566 upstream.
Make sure that the controller is active before disabling clocks on probe failure to avoid unbalanced clock disable.
Also drop the usage count before returning (so that the controller can be suspended after a probe deferral) and restore the autosuspend setting.
--- drivers/spi/spi-cadence.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/spi/spi-cadence.c +5 -1
@@ -741,7 +741,6 @@ static int cdns_spi_probe(struct platfor/* Set to default valid value */ ctlr->max_speed_hz = xspi->clk_rate /4 ; xspi->speed_hz = ctlr->max_speed_hz; -pm_runtime_put_autosuspend (&pdev->dev); }else { ctlr->mode_bits |=SPI_NO_CS ; ctlr->target_abort = cdns_target_abort;
@@ -752,12 +751,17 @@ static int cdns_spi_probe(struct platfor goto clk_dis_all; } +if (!spi_controller_is_target (ctlr)) +pm_runtime_put_autosuspend (&pdev->dev); +return ret; clk_dis_all:if (!spi_controller_is_target (ctlr)) {pm_runtime_disable (&pdev->dev);pm_runtime_set_suspended (&pdev->dev); +pm_runtime_put_noidle (&pdev->dev); +pm_runtime_dont_use_autosuspend (&pdev->dev); } remove_ctlr:spi_controller_put (ctlr);
Greg Kroah-Hartman
maintainerPATCH 120/201 spi: cadence-quadspi: fix runtime pm disable imbalance on probe failure
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 5ff4d5d1af0c7517bd8db83c95c4247a9729a548 upstream.
A recent attempt to fix the probe error handling introduced a runtime PM disable depth imbalance by incorrectly disabling runtime PM on early failures (e.g. probe deferral).
--- drivers/spi/spi-cadence-quadspi.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-)
drivers/spi/spi-cadence-quadspi.c +5 -6
@@ -1871,7 +1871,7 @@ static int cqspi_probe(struct platform_d ret =clk_bulk_prepare_enable (CLK_QSPI_NUM , cqspi->clks);if (ret) {dev_err (dev,"Cannot enable QSPI clocks.\n" ); - goto disable_rpm; +return ret; }/* Obtain QSPI reset control */
@@ -1981,7 +1981,7 @@ static int cqspi_probe(struct platform_d ret =cqspi_request_mmap_dma (cqspi);if (ret == -EPROBE_DEFER ) {dev_err_probe (&pdev->dev, ret,"Failed to request mmap DMA\n" ); - goto disable_controller; + goto disable_rpm; } }
@@ -1999,14 +1999,13 @@ static int cqspi_probe(struct platform_d release_dma_chan:if (cqspi->rx_chan)dma_release_channel (cqspi->rx_chan); -disable_controller: +disable_rpm: +if (!(ddata && (ddata->quirks &CQSPI_DISABLE_RUNTIME_PM ))) +pm_runtime_disable (dev);cqspi_controller_enable (cqspi,0 ); disable_clks:if (pm_runtime_get_sync (&pdev->dev) >=0 )clk_bulk_disable_unprepare (CLK_QSPI_NUM , cqspi->clks); -disable_rpm: -if (!(ddata && (ddata->quirks &CQSPI_DISABLE_RUNTIME_PM ))) -pm_runtime_disable (dev);return ret; }
Greg Kroah-Hartman
maintainerPATCH 121/201 spi: cadence-quadspi: fix clock imbalance on probe failure
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit cba53fe20c18688c17ca668ad0e4ec05e31c70d3 upstream.
Drop the bogus runtime PM get on probe failures that was never needed and that leaks a usage count reference while preventing the clocks from being disabled (as runtime PM has not yet been enabled).
--- drivers/spi/spi-cadence-quadspi.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/spi/spi-cadence-quadspi.c +1 -2
@@ -2004,8 +2004,7 @@ disable_rpm:pm_runtime_disable (dev);cqspi_controller_enable (cqspi,0 ); disable_clks: -if (pm_runtime_get_sync (&pdev->dev) >=0 ) -clk_bulk_disable_unprepare (CLK_QSPI_NUM , cqspi->clks); +clk_bulk_disable_unprepare (CLK_QSPI_NUM , cqspi->clks);return ret; }
Greg Kroah-Hartman
maintainerPATCH 122/201 spi: cadence-quadspi: fix runtime pm and clock imbalance on unbind
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 5e8bb0cc72f1d52d8ac2a88f4c952e2e98056aed upstream.
Make sure to balance the runtime PM usage count before returning on probe failure (to allow the controller to suspend after a probe deferral) and to only drop the usage count on driver unbind to avoid a clock disable imbalance.
Also restore the autosuspend setting.
--- drivers/spi/spi-cadence-quadspi.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-)
drivers/spi/spi-cadence-quadspi.c +10 -7
@@ -1864,10 +1864,6 @@ static int cqspi_probe(struct platform_dif (irq <0 )return -ENXIO ; - ret =pm_runtime_set_active (dev); -if (ret) -return ret; - ret =clk_bulk_prepare_enable (CLK_QSPI_NUM , cqspi->clks);if (ret) {dev_err (dev,"Cannot enable QSPI clocks.\n" );
@@ -1966,10 +1962,11 @@ static int cqspi_probe(struct platform_d cqspi->sclk =0 ;if (!(ddata && (ddata->quirks &CQSPI_DISABLE_RUNTIME_PM ))) { -pm_runtime_enable (dev);pm_runtime_set_autosuspend_delay (dev,CQSPI_AUTOSUSPEND_TIMEOUT );pm_runtime_use_autosuspend (dev);pm_runtime_get_noresume (dev); +pm_runtime_set_active (dev); +pm_runtime_enable (dev); } host->num_chipselect = cqspi->num_chipselect;
@@ -2000,8 +1997,12 @@ release_dma_chan:if (cqspi->rx_chan)dma_release_channel (cqspi->rx_chan); disable_rpm: -if (!(ddata && (ddata->quirks &CQSPI_DISABLE_RUNTIME_PM ))) +if (!(ddata && (ddata->quirks &CQSPI_DISABLE_RUNTIME_PM ))) {pm_runtime_disable (dev); +pm_runtime_set_suspended (dev); +pm_runtime_put_noidle (dev); +pm_runtime_dont_use_autosuspend (dev); + }cqspi_controller_enable (cqspi,0 ); disable_clks:clk_bulk_disable_unprepare (CLK_QSPI_NUM , cqspi->clks);
@@ -2038,8 +2039,10 @@ static void cqspi_remove(struct platformclk_bulk_disable_unprepare (CLK_QSPI_NUM , cqspi->clks);if (!(ddata && (ddata->quirks &CQSPI_DISABLE_RUNTIME_PM ))) { -pm_runtime_put_sync (&pdev->dev);pm_runtime_disable (&pdev->dev); +pm_runtime_set_suspended (&pdev->dev); +pm_runtime_put_noidle (&pdev->dev); +pm_runtime_dont_use_autosuspend (&pdev->dev); } }
Greg Kroah-Hartman
maintainerPATCH 123/201 spi: cadence-quadspi: fix unclocked access on unbind
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 233db2cb14db8b1935dda52a6affd97276462b82 upstream.
Make sure that the controller is runtime resumed before disabling it during driver unbind to avoid an unclocked register access.
This issue was flagged by Sashiko when reviewing a controller deregistration fix.
--- drivers/spi/spi-cadence-quadspi.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
drivers/spi/spi-cadence-quadspi.c +3 -4
@@ -2029,14 +2029,13 @@ static void cqspi_remove(struct platformif (cqspi->rx_chan)dma_release_channel (cqspi->rx_chan); -cqspi_controller_enable (cqspi,0 ); - -if (!(ddata && (ddata->quirks &CQSPI_DISABLE_RUNTIME_PM ))) ret =pm_runtime_get_sync (&pdev->dev); -if (ret >=0 ) +if (ret >=0 ) { +cqspi_controller_enable (cqspi,0 );clk_bulk_disable_unprepare (CLK_QSPI_NUM , cqspi->clks); + }if (!(ddata && (ddata->quirks &CQSPI_DISABLE_RUNTIME_PM ))) {pm_runtime_disable (&pdev->dev);
Greg Kroah-Hartman
maintainerPATCH 88/201 spi: omap2-mcspi: fix controller deregistration
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit fb45f95c377e4a4bdece2c5e17643b459c9c13e7 upstream.
Make sure to deregister the controller before releasing underlying resources like DMA during driver unbind.
--- drivers/spi/spi-omap2-mcspi.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/spi/spi-omap2-mcspi.c +7 -1
@@ -1585,7 +1585,7 @@ static int omap2_mcspi_probe(struct platif (status <0 ) goto disable_pm; - status =devm_spi_register_controller (&pdev->dev, ctlr); + status =spi_register_controller (ctlr);if (status <0 ) goto disable_pm;
@@ -1606,11 +1606,17 @@ static void omap2_mcspi_remove(struct plstruct spi_controller *ctlr =platform_get_drvdata (pdev);struct omap2_mcspi *mcspi =spi_controller_get_devdata (ctlr); +spi_controller_get (ctlr); + +spi_unregister_controller (ctlr); +omap2_mcspi_release_dma (ctlr);pm_runtime_dont_use_autosuspend (mcspi->dev);pm_runtime_put_sync (mcspi->dev);pm_runtime_disable (&pdev->dev); + +spi_controller_put (ctlr); }/* work with hotplug and coldplug */
Greg Kroah-Hartman
maintainerPATCH 124/201 drm/msm/gem: fix error handling in msm_ioctl_gem_info_get_metadata()
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yasuaki Torimaru <[email protected]>
commit 47cbfe2608314b833ad61a65827d8fb363bc2d2d upstream.
msm_ioctl_gem_info_get_metadata() always returns 0 regardless of errors. When copy_to_user() fails or the user buffer is too small, the error code stored in ret is ignored because the function unconditionally returns 0. This causes userspace to believe the ioctl succeeded when it did not.
Additionally, kmemdup() can return NULL on allocation failure, but the return value is not checked. This leads to a NULL pointer dereference in the subsequent copy_to_user() call.
Add the missing NULL check for kmemdup() and return ret instead of 0.
Note that the SET counterpart (msm_ioctl_gem_info_set_metadata) correctly returns ret.
Patchwork: https://patchwork.freedesktop.org/patch/714478/
Message-ID: <[email protected]>
--- drivers/gpu/drm/msm/msm_drv.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/gpu/drm/msm/msm_drv.c +6 -1
@@ -536,6 +536,11 @@ static int msm_ioctl_gem_info_get_metada len = msm_obj->metadata_size; buf =kmemdup (msm_obj->metadata, len,GFP_KERNEL ); +if (!buf) { +msm_gem_unlock (obj); +return -ENOMEM ; + } +msm_gem_unlock (obj);if (*metadata_size < len) {
@@ -548,7 +553,7 @@ static int msm_ioctl_gem_info_get_metadakfree (buf); -return 0 ; +return ret; } static int msm_ioctl_gem_info(struct drm_device *dev, void *data,
Greg Kroah-Hartman
maintainerPATCH 125/201 drm/colorop: Fix blob property reference tracking in state lifecycle
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Harry Wentland <[email protected]>
commit 235b333e2878d791cee09e1e72f44611a9400114 upstream.
The colorop state blob property handling had memory leaks during state duplication, destruction, and reset operations. The implementation failed to follow the established pattern from drm_crtc's handling of DEGAMMA/GAMMA blob properties.
Issues fixed:
- drm_colorop_atomic_destroy_state() was freeing state memory without releasing the blob reference, causing a leak
- drm_colorop_reset() was directly freeing old state with kfree() instead of properly destroying it, leaking blob references
- drm_colorop_cleanup() had duplicate blob cleanup code
Changes:
- Add __drm_atomic_helper_colorop_destroy_state() helper to properly release blob references before freeing state memory
- Update drm_colorop_atomic_destroy_state() to call the helper
- Fix drm_colorop_reset() to use drm_colorop_atomic_destroy_state() for proper cleanup of old state
- Simplify drm_colorop_cleanup() to use the common destruction path
This matches the well-tested pattern used by drm_crtc since 2016 and ensures proper reference counting throughout the state lifecycle.
Co-developed by Claude Sonnet 4.5.
--- drivers/gpu/drm/drm_colorop.c | 26 +++++++++++++++++++------- 1 file changed, 19 insertions(+), 7 deletions(-)
drivers/gpu/drm/drm_colorop.c +19 -7
@@ -169,12 +169,8 @@ void drm_colorop_cleanup(struct drm_cololist_del (&colorop->head); config->num_colorop--; -if (colorop->state && colorop->state->data) { -drm_property_blob_put (colorop->state->data); - colorop->state->data =NULL ; - } - -kfree (colorop->state); +if (colorop->state) +drm_colorop_atomic_destroy_state (colorop, colorop->state); }EXPORT_SYMBOL (drm_colorop_cleanup);
@@ -458,9 +454,23 @@ drm_atomic_helper_colorop_duplicate_statreturn state; } +/** +* __drm_atomic_helper_colorop_destroy_state - release colorop state +* @state: colorop state object to release +* +* Releases all resources stored in the colorop state without actually freeing +* the memory of the colorop state. This is useful for drivers that subclass the +* colorop state. +*/ +static void __drm_atomic_helper_colorop_destroy_state (struct drm_colorop_state *state) +{ +drm_property_blob_put (state->data); +} +void drm_colorop_atomic_destroy_state (struct drm_colorop *colorop,struct drm_colorop_state *state) { +__drm_atomic_helper_colorop_destroy_state (state);kfree (state); }
@@ -511,7 +521,9 @@ static void __drm_colorop_reset(struct dvoid drm_colorop_reset (struct drm_colorop *colorop) { -kfree (colorop->state); +if (colorop->state) +drm_colorop_atomic_destroy_state (colorop, colorop->state); + colorop->state =kzalloc_obj (*colorop->state);if (colorop->state)
Greg Kroah-Hartman
maintainerPATCH 126/201 drm/imx: parallel-display: Prefer bus format set via legacy "interface-pix-fmt" DT property
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marek Vasut <[email protected]>
commit cdf26e1462c220629bb79d487263b66f8b679eab upstream.
Prefer bus format set via legacy "interface-pix-fmt" DT property over panel bus format. This is necessary to retain support for DTs which configure the IPUv3 parallel output as 24bit DPI, but connect 18bit DPI panels to it with hardware swizzling.
This used to work up to Linux 6.12, but stopped working in 6.13, reinstate the behavior to support old DTs.
--- drivers/gpu/drm/imx/ipuv3/parallel-display.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-)
drivers/gpu/drm/imx/ipuv3/parallel-display.c +12 -3
@@ -110,8 +110,7 @@ imx_pd_bridge_atomic_get_input_bus_fmts( output_fmt = imxpd->bus_format ? :MEDIA_BUS_FMT_RGB888_1X24 ;/* Now make sure the requested output format is supported. */ -if ((imxpd->bus_format && imxpd->bus_format != output_fmt) || - !imx_pd_format_supported (output_fmt)) { +if (!imx_pd_format_supported (output_fmt)) { *num_input_fmts =0 ;return NULL ; }
@@ -121,7 +120,17 @@ imx_pd_bridge_atomic_get_input_bus_fmts(if (!input_fmts)return NULL ; - input_fmts[0 ] = output_fmt; +/* +* Prefer bus format set via legacy "interface-pix-fmt" DT property +* over panel bus format. This is necessary to retain support for +* DTs which configure the IPUv3 parallel output as 24bit, but +* connect 18bit DPI panels to it with hardware swizzling. +*/ +if (imxpd->bus_format && imxpd->bus_format != output_fmt) + input_fmts[0 ] = imxpd->bus_format; +else + input_fmts[0 ] = output_fmt; +return input_fmts; }
Greg Kroah-Hartman
maintainerPATCH 127/201 drm/msm: always recover the gpu
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Anna Maniscalco <[email protected]>
commit 01a0d6cd7032e9993feea19fadb03ef9d5b488f2 upstream.
Previously, in case there was no more work to do, recover worker wouldn't trigger recovery and would instead rely on the gpu going to sleep and then resuming when more work is submitted.
Recover_worker will first increment the fence of the hung ring so, if there's only one job submitted to a ring and that causes an hang, it will early out.
There's no guarantee that the gpu will suspend and resume before more work is submitted and if the gpu is in a hung state it will stay in that state and probably trigger a timeout again.
Just stop checking and always recover the gpu.
Patchwork: https://patchwork.freedesktop.org/patch/704066/
Message-ID: <[email protected]>
--- drivers/gpu/drm/msm/msm_gpu.c | 42 ++++++++++++++++++++---------------------- 1 file changed, 20 insertions(+), 22 deletions(-)
drivers/gpu/drm/msm/msm_gpu.c +20 -22
@@ -546,32 +546,30 @@ static void recover_worker(struct kthreamsm_update_fence (ring->fctx, fence); } -if (msm_gpu_active (gpu)) { -/* retire completed submits, plus the one that hung: */ -retire_submits (gpu); +/* retire completed submits, plus the one that hung: */ +retire_submits (gpu); - gpu->funcs->recover (gpu); + gpu->funcs->recover (gpu); -/* -* Replay all remaining submits starting with highest priority -* ring -*/ -for (i =0 ; i < gpu->nr_rings; i++) { -struct msm_ringbuffer *ring = gpu->rb[i]; -unsigned long flags; +/* +* Replay all remaining submits starting with highest priority +* ring +*/ +for (i =0 ; i < gpu->nr_rings; i++) { +struct msm_ringbuffer *ring = gpu->rb[i]; +unsigned long flags; -spin_lock_irqsave (&ring->submit_lock, flags); -list_for_each_entry (submit, &ring->submits, node) { -/* -* If the submit uses an unusable vm make sure -* we don't actually run it -*/ -if (to_msm_vm (submit->vm)->unusable) - submit->nr_cmds =0 ; - gpu->funcs->submit (gpu, submit); - } -spin_unlock_irqrestore (&ring->submit_lock, flags); +spin_lock_irqsave (&ring->submit_lock, flags); +list_for_each_entry (submit, &ring->submits, node) { +/* +* If the submit uses an unusable vm make sure +* we don't actually run it +*/ +if (to_msm_vm (submit->vm)->unusable) + submit->nr_cmds =0 ; + gpu->funcs->submit (gpu, submit); } +spin_unlock_irqrestore (&ring->submit_lock, flags); }pm_runtime_put (&gpu->pdev->dev);
Greg Kroah-Hartman
maintainerPATCH 89/201 spi: pic32: fix controller deregistration
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 6b627bfe0c44e064aba464839e430dc1ca2b0bb8 upstream.
Make sure to deregister the controller before releasing underlying resources like DMA during driver unbind.
--- drivers/spi/spi-pic32.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-)
drivers/spi/spi-pic32.c +8 -3
@@ -821,7 +821,7 @@ static int pic32_spi_probe(struct platfo }/* register host */ - ret =devm_spi_register_controller (&pdev->dev, host); + ret =spi_register_controller (host);if (ret) {dev_err (&host->dev,"failed registering spi host\n" ); goto err_bailout;
@@ -840,11 +840,16 @@ err_host:static void pic32_spi_remove (struct platform_device *pdev) { -struct pic32_spi *pic32s; +struct pic32_spi *pic32s =platform_get_drvdata (pdev); + +spi_controller_get (pic32s->host); + +spi_unregister_controller (pic32s->host); - pic32s =platform_get_drvdata (pdev);pic32_spi_disable (pic32s);pic32_spi_dma_unprep (pic32s); + +spi_controller_put (pic32s->host); }static const struct of_device_id pic32_spi_of_match[] = {
Greg Kroah-Hartman
maintainerPATCH 90/201 spi: ep93xx: fix controller deregistration
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit f4838934b695a58eda0833583cb8028e73a19529 upstream.
Make sure to deregister the controller before releasing underlying resources like DMA during driver unbind.
--- drivers/spi/spi-ep93xx.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/spi/spi-ep93xx.c +7 -1
@@ -689,7 +689,7 @@ static int ep93xx_spi_probe(struct platf/* make sure that the hardware is disabled */ writel (0 , espi->mmio +SSPCR1 ); - error =devm_spi_register_controller (&pdev->dev, host); + error =spi_register_controller (host);if (error) {dev_err (&pdev->dev,"failed to register SPI host\n" ); goto fail_free_dma;
@@ -713,7 +713,13 @@ static void ep93xx_spi_remove(struct plastruct spi_controller *host =platform_get_drvdata (pdev);struct ep93xx_spi *espi =spi_controller_get_devdata (host); +spi_controller_get (host); + +spi_unregister_controller (host); +ep93xx_spi_release_dma (espi); + +spi_controller_put (host); }static const struct of_device_id ep93xx_spi_of_ids[] = {
Greg Kroah-Hartman
maintainerPATCH 91/201 spi: mtk-nor: fix controller deregistration
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 76336f24934621db286cabb20b483773ee01dcaa upstream.
Make sure to deregister the controller before disabling underlying resources like clocks during driver unbind.
--- drivers/spi/spi-mtk-nor.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/spi/spi-mtk-nor.c +3 -1
@@ -913,7 +913,7 @@ static int mtk_nor_probe(struct platformpm_runtime_enable (&pdev->dev);pm_runtime_get_noresume (&pdev->dev); - ret =devm_spi_register_controller (&pdev->dev, ctlr); + ret =spi_register_controller (ctlr);if (ret <0 ) goto err_probe;
@@ -938,6 +938,8 @@ static void mtk_nor_remove(struct platfostruct spi_controller *ctlr =dev_get_drvdata (&pdev->dev);struct mtk_nor *sp =spi_controller_get_devdata (ctlr); +spi_unregister_controller (ctlr); +pm_runtime_disable (&pdev->dev);pm_runtime_set_suspended (&pdev->dev);pm_runtime_dont_use_autosuspend (&pdev->dev);
Greg Kroah-Hartman
maintainerPATCH 92/201 spi: pl022: fix controller deregistration
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 994b33366be9148240690e3e94bffe17c4d89458 upstream.
Make sure to deregister the controller before releasing underlying resources like DMA during driver unbind.
--- drivers/spi/spi-pl022.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/spi/spi-pl022.c +7 -1
@@ -1956,7 +1956,7 @@ static int pl022_probe(struct amba_devic/* Register with the SPI framework */ amba_set_drvdata (adev, pl022); - status =devm_spi_register_controller (&adev->dev, host); + status =spi_register_controller (host);if (status !=0 ) {dev_err_probe (&adev->dev, status,"problem registering spi host\n" );
@@ -1997,6 +1997,10 @@ pl022_remove(struct amba_device *adev)if (!pl022)return ; +spi_controller_get (pl022->host); + +spi_unregister_controller (pl022->host); +/* * undo pm_runtime_put() in probe. I assume that we're not * accessing the primecell here.
@@ -2008,6 +2012,8 @@ pl022_remove(struct amba_device *adev)pl022_dma_remove (pl022);amba_release_regions (adev); + +spi_controller_put (pl022->host); }#ifdef CONFIG_PM_SLEEP
Greg Kroah-Hartman
maintainerPATCH 93/201 spi: ch341: fix devres lifetime
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit abe572f630bc1f0e77041012ab075869036ede4f upstream.
USB drivers bind to USB interfaces and any device managed resources should have their lifetime tied to the interface rather than parent USB device. This avoids issues like memory leaks when drivers are unbound without their devices being physically disconnected (e.g. on probe deferral or configuration changes).
Fix the controller and driver data lifetime so that they are released on driver unbind.
Note that this also makes sure that the SPI controller is placed correctly under the USB interface in the device tree.
--- drivers/spi/spi-ch341.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
drivers/spi/spi-ch341.c +3 -4
@@ -152,7 +152,7 @@ static int ch341_probe(struct usb_interfif (ret)return ret; - ctrl =devm_spi_alloc_host (&udev->dev,sizeof (struct ch341_spi_dev )); + ctrl =devm_spi_alloc_host (&intf->dev,sizeof (struct ch341_spi_dev ));if (!ctrl)return -ENOMEM ;
@@ -163,7 +163,7 @@ static int ch341_probe(struct usb_interf ch341->read_pipe =usb_rcvbulkpipe (udev,usb_endpoint_num (in)); ch341->rx_len =usb_endpoint_maxp (in); - ch341->rx_buf =devm_kzalloc (&udev->dev, ch341->rx_len,GFP_KERNEL ); + ch341->rx_buf =devm_kzalloc (&intf->dev, ch341->rx_len,GFP_KERNEL );if (!ch341->rx_buf)return -ENOMEM ;
@@ -171,8 +171,7 @@ static int ch341_probe(struct usb_interfif (!ch341->rx_urb)return -ENOMEM ; - ch341->tx_buf = -devm_kzalloc (&udev->dev,CH341_PACKET_LENGTH ,GFP_KERNEL ); + ch341->tx_buf =devm_kzalloc (&intf->dev,CH341_PACKET_LENGTH ,GFP_KERNEL );if (!ch341->tx_buf) { ret = -ENOMEM ; goto err_free_urb;
Greg Kroah-Hartman
maintainerPATCH 84/201 spi: mt65xx: fix controller deregistration
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 2ad30599cccc572ba2fc11010670eb6e01ea6bfc upstream.
Make sure to deregister the controller before disabling underlying resources like clocks during driver unbind.
--- drivers/spi/spi-mt65xx.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/spi/spi-mt65xx.c +3 -1
@@ -1325,7 +1325,7 @@ static int mtk_spi_probe(struct platformpm_runtime_enable (dev); - ret =devm_spi_register_controller (dev, host); + ret =spi_register_controller (host);if (ret) {pm_runtime_disable (dev);return dev_err_probe (dev, ret,"failed to register host\n" );
@@ -1340,6 +1340,8 @@ static void mtk_spi_remove(struct platfostruct mtk_spi *mdata =spi_controller_get_devdata (host);int ret; +spi_unregister_controller (host); +cpu_latency_qos_remove_request (&mdata->qos_request);if (mdata->use_spimem && !completion_done (&mdata->spimem_done))complete (&mdata->spimem_done);
Greg Kroah-Hartman
maintainerPATCH 129/201 drm/i915/psr: Init variable to avoid early exit from et alignment loop
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jouni Högander <[email protected]>
commit 314f6179e370988ac00dadf373a4f6166eb3db15 upstream.
Uninitialized boolean variable may cause unwanted exit from et alignment loop. Fix this by initializing it as false.
--- drivers/gpu/drm/i915/display/intel_psr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/i915/display/intel_psr.c +1 -1
@@ -2970,7 +2970,7 @@ int intel_psr2_sel_fetch_update(struct ireturn ret; do { - bool cursor_in_su_area; + bool cursor_in_su_area = false; /* * Adjust su area to cover cursor fully as necessary
Greg Kroah-Hartman
maintainerPATCH 138/201 drm/amdgpu: Add bounds checking to ib_{get,set}_value
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Benjamin Cheng <[email protected]>
commit 66085e206431ef88ce36f53c1f53d570790ccc9e upstream.
The uvd/vce/vcn code accesses the IB at predefined offsets without checking that the IB is large enough. Check the bounds here. The caller is responsible for making sure it can handle arbitrary return values.
Also make the idx a uint32_t to prevent overflows causing the condition to fail.
--- drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h +7 -4
@@ -553,15 +553,18 @@ void amdgpu_debugfs_ring_init(struct amdint amdgpu_ring_init_mqd (struct amdgpu_ring *ring); -static inline u32 amdgpu_ib_get_value (struct amdgpu_ib *ib,int idx) +static inline u32 amdgpu_ib_get_value (struct amdgpu_ib *ib,uint32_t idx) { -return ib->ptr[idx]; +if (idx < ib->length_dw) +return ib->ptr[idx]; +return 0 ; } -static inline void amdgpu_ib_set_value (struct amdgpu_ib *ib,int idx, +static inline void amdgpu_ib_set_value (struct amdgpu_ib *ib,uint32_t idx,uint32_t value) { - ib->ptr[idx] = value; +if (idx < ib->length_dw) + ib->ptr[idx] = value; } int amdgpu_ib_get(struct amdgpu_device *adev, struct amdgpu_vm *vm,
Greg Kroah-Hartman
maintainerPATCH 139/201 drm/amdgpu/vcn4: Prevent OOB reads when parsing IB
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Benjamin Cheng <[email protected]>
commit 2444eb0ec8283f4a3845eb7febad378476e1ba3c upstream.
Rewrite the IB parsing to use amdgpu_ib_get_value() which handles the bounds checks.
--- drivers/gpu/drm/amd/amdgpu/vcn_v4_0.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-)
drivers/gpu/drm/amd/amdgpu/vcn_v4_0.c +12 -11
@@ -1913,9 +1913,10 @@ out:static int vcn_v4_0_enc_find_ib_param (struct amdgpu_ib *ib,uint32_t id,int start) {int i; +uint32_t len; -for (i = start; i < ib->length_dw && ib->ptr[i] >=8 ; i += ib->ptr[i] /4 ) { -if (ib->ptr[i +1 ] == id) +for (i = start; (len =amdgpu_ib_get_value (ib, i)) >=8 ; i += len /4 ) { +if (amdgpu_ib_get_value (ib, i +1 ) == id)return i; }return -1 ;
@@ -1926,8 +1927,6 @@ static int vcn_v4_0_ring_patch_cs_in_pla struct amdgpu_ib *ib) {struct amdgpu_ring *ring =amdgpu_job_ring (job); -struct amdgpu_vcn_decode_buffer *decode_buffer; -uint64_t addr;uint32_t val;int idx =0 , sidx;
@@ -1938,20 +1937,22 @@ static int vcn_v4_0_ring_patch_cs_in_plawhile ((idx =vcn_v4_0_enc_find_ib_param (ib,RADEON_VCN_ENGINE_INFO , idx)) >=0 ) { val =amdgpu_ib_get_value (ib, idx +2 );/* RADEON_VCN_ENGINE_TYPE */ if (val ==RADEON_VCN_ENGINE_TYPE_DECODE ) { - decode_buffer = (struct amdgpu_vcn_decode_buffer *)&ib->ptr[idx +6 ]; +uint32_t valid_buf_flag =amdgpu_ib_get_value (ib, idx +6 ); +uint64_t msg_buffer_addr; -if (!(decode_buffer->valid_buf_flag &0x1 )) +if (!(valid_buf_flag &0x1 ))return 0 ; - addr = ((u64 )decode_buffer->msg_buffer_address_hi) <<32 | - decode_buffer->msg_buffer_address_lo; -return vcn_v4_0_dec_msg (p, job, addr); + msg_buffer_addr = ((u64 )amdgpu_ib_get_value (ib, idx +7 )) <<32 | +amdgpu_ib_get_value (ib, idx +8 ); +return vcn_v4_0_dec_msg (p, job, msg_buffer_addr); }else if (val ==RADEON_VCN_ENGINE_TYPE_ENCODE ) { sidx =vcn_v4_0_enc_find_ib_param (ib,RENCODE_IB_PARAM_SESSION_INIT , idx); -if (sidx >=0 && ib->ptr[sidx +2 ] ==RENCODE_ENCODE_STANDARD_AV1 ) +if (sidx >=0 && +amdgpu_ib_get_value (ib, sidx +2 ) ==RENCODE_ENCODE_STANDARD_AV1 )return vcn_v4_0_limit_sched (p, job); } - idx += ib->ptr[idx] /4 ; + idx +=amdgpu_ib_get_value (ib, idx) /4 ; }return 0 ; }
Greg Kroah-Hartman
maintainerPATCH 140/201 drm/amdgpu/vce: Prevent partial address patches
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Benjamin Cheng <[email protected]>
commit de2a02cc28d6d5d37db07d00a9a684c754a5fd74 upstream.
In the case that only one of lo/hi is valid, the patching could result in a bad address written to in FW.
--- drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c +3 -0
@@ -698,6 +698,9 @@ static int amdgpu_vce_cs_reloc(struct amuint64_t addr;int r; +if (lo >= ib->length_dw || hi >= ib->length_dw) +return -EINVAL ; +if (index ==0xffffffff ) index =0 ;
Greg Kroah-Hartman
maintainerPATCH 141/201 drm/amdgpu/vcn4: Prevent OOB reads when parsing dec msg
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Benjamin Cheng <[email protected]>
commit 0a78f2bac1424deb7c9d5e09c6b8e849d8e8b648 upstream.
Check bounds against the end of the BO whenever we access the msg.
--- drivers/gpu/drm/amd/amdgpu/vcn_v4_0.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-)
drivers/gpu/drm/amd/amdgpu/vcn_v4_0.c +18 -3
@@ -1826,7 +1826,7 @@ static int vcn_v4_0_dec_msg(struct amdgpstruct ttm_operation_ctx ctx = { false, false };struct amdgpu_device *adev = p->adev;struct amdgpu_bo_va_mapping *map; -uint32_t *msg, num_buffers; +uint32_t *msg, num_buffers, len_dw;struct amdgpu_bo *bo;uint64_t start, end;unsigned int i;
@@ -1847,6 +1847,11 @@ static int vcn_v4_0_dec_msg(struct amdgpreturn -EINVAL ; } +if (end - addr <16 ) { +DRM_ERROR ("VCN messages must be at least 4 DWORDs!\n" ); +return -EINVAL ; + } + bo->flags |=AMDGPU_GEM_CREATE_CPU_ACCESS_REQUIRED ;amdgpu_bo_placement_from_domain (bo, bo->allowed_domains); r =ttm_bo_validate (&bo->tbo, &bo->placement, &ctx);
@@ -1863,8 +1868,8 @@ static int vcn_v4_0_dec_msg(struct amdgp msg = ptr + addr - start; -/* Check length */ if (msg[1 ] > end - addr) { +DRM_ERROR ("VCN message header does not fit in BO!\n" ); r = -EINVAL ; goto out; }
@@ -1872,7 +1877,16 @@ static int vcn_v4_0_dec_msg(struct amdgpif (msg[3 ] !=RDECODE_MSG_CREATE ) goto out; + len_dw = msg[1 ] /4 ; num_buffers = msg[2 ]; + +/* Verify that all indices fit within the claimed length. Each index is 4 DWORDs */ +if (num_buffers > len_dw ||6 + num_buffers *4 > len_dw) { +DRM_ERROR ("VCN message has too many buffers!\n" ); + r = -EINVAL ; + goto out; + } +for (i =0 , msg = &msg[6 ]; i < num_buffers; ++i, msg +=4 ) {uint32_t offset, size, *create;
@@ -1882,7 +1896,8 @@ static int vcn_v4_0_dec_msg(struct amdgp offset = msg[1 ]; size = msg[2 ]; -if (offset + size > end) { +if (size <4 || offset + size > end - addr) { +DRM_ERROR ("VCN message buffer exceeds BO bounds!\n" ); r = -EINVAL ; goto out; }
Greg Kroah-Hartman
maintainerPATCH 142/201 drm/amdgpu/vcn3: Prevent OOB reads when parsing dec msg
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Benjamin Cheng <[email protected]>
commit b193019860d61e92da395eae2011f2f6716b182f upstream.
Check bounds against the end of the BO whenever we access the msg.
--- drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c | 23 +++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-)
drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c +19 -4
@@ -1909,7 +1909,7 @@ static int vcn_v3_0_dec_msg(struct amdgpstruct ttm_operation_ctx ctx = { false, false };struct amdgpu_device *adev = p->adev;struct amdgpu_bo_va_mapping *map; -uint32_t *msg, num_buffers; +uint32_t *msg, num_buffers, len_dw;struct amdgpu_bo *bo;uint64_t start, end;unsigned int i;
@@ -1930,6 +1930,11 @@ static int vcn_v3_0_dec_msg(struct amdgpreturn -EINVAL ; } +if (end - addr <16 ) { +DRM_ERROR ("VCN messages must be at least 4 DWORDs!\n" ); +return -EINVAL ; + } + bo->flags |=AMDGPU_GEM_CREATE_CPU_ACCESS_REQUIRED ;amdgpu_bo_placement_from_domain (bo, bo->allowed_domains); r =ttm_bo_validate (&bo->tbo, &bo->placement, &ctx);
@@ -1946,8 +1951,8 @@ static int vcn_v3_0_dec_msg(struct amdgp msg = ptr + addr - start; -/* Check length */ if (msg[1 ] > end - addr) { +DRM_ERROR ("VCN message header does not fit in BO!\n" ); r = -EINVAL ; goto out; }
@@ -1955,7 +1960,16 @@ static int vcn_v3_0_dec_msg(struct amdgpif (msg[3 ] !=RDECODE_MSG_CREATE ) goto out; + len_dw = msg[1 ] /4 ; num_buffers = msg[2 ]; + +/* Verify that all indices fit within the claimed length. Each index is 4 DWORDs */ +if (num_buffers > len_dw ||6 + num_buffers *4 > len_dw) { +DRM_ERROR ("VCN message has too many buffers!\n" ); + r = -EINVAL ; + goto out; + } +for (i =0 , msg = &msg[6 ]; i < num_buffers; ++i, msg +=4 ) {uint32_t offset, size, *create;
@@ -1965,14 +1979,15 @@ static int vcn_v3_0_dec_msg(struct amdgp offset = msg[1 ]; size = msg[2 ]; -if (offset + size > end) { +if (size <4 || offset + size > end - addr) { +DRM_ERROR ("VCN message buffer exceeds BO bounds!\n" ); r = -EINVAL ; goto out; } create = ptr + addr + offset - start; -/* H246, HEVC and VP9 can run on any instance */ +/* H264, HEVC and VP9 can run on any instance */ if (create[0 ] ==0x7 || create[0 ] ==0x10 || create[0 ] ==0x11 )continue ;
Greg Kroah-Hartman
maintainerPATCH 143/201 drm/amd/display: Change dither policy for 10 bpc output back to dithering
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mario Kleiner <[email protected]>
commit d65bfb1782304b03862c8c725fac608015dffd36 upstream.
Commit d5df648ec830 ("drm/amd/display: Change dither policy for 10bpc to round") degraded display of 12 bpc color precision output to 10 bpc sinks by switching 10 bpc output from dithering to "truncate to 10 bpc".
I don't find the argumentation in that commit convincing, but the consequences highly unfortunate, especially for applications that require effective > 10 bpc precision output of > 10 bpc framebuffers.
The argument wasn't something strong like "there are hardware design defects or limitations which require us to work around broken dithering to 10 bpc", or "there are some special use cases which do require truncation to 10 bpc", but essentially "at some point in the past we used truncation in Polaris/Vega times and it looks like it got inadvertently changed for Navi, so let's do that again". I couldn't find evidence for that in the git commit logs for this. The commit message also acknowledges that using dithering "...makes some sense for FP16... ...but not for ARGB2101010 surfaces..."
The problem with this is that it makes fp16 surfaces, and especially rgba16 fixed point surfaces, less useful. These are now well supported by Mesa 25.3 and later via OpenGL + EGL, Vulkan/WSI, and by OSS AMDVLK Vulkan/WSI/display, and also by GNOME 50 mutter under Wayland, and they used to provide more than 10 bpc effective precision at the output.
Even for 8 or 10 bpc surfaces, the color pipeline behind the framebuffer, e.g., gamma tables, CTM, can be used for color correction and will benefit from an effective > 10 bpc output precision via dithering, retaining some precision that would get lost on the way through the pipeline, e.g., due to non-linear gamma functions.
Scientific apps rely on this for > 10 bpc display precision. Truncating to 10 bpc, instead of dithering the pipeline internal 12 bpc precision down to 10 bpc, causes a serious loss of precision. This also creates the undesirable and slightly absurd situation that using a cheap monitor with only 8 bpc input and display panel will yield roughly 12 bpc precision via dithering from 12 -> 8 bpc, whereas investment into a more expensive monitor with 10 bpc input and native 10 bpc display will only yield 10 bpc, even if a fp16 or rgb16 framebuffer and/or a properly set up color pipeline (gamma tables, CTM's etc. with more than 10 bpc out precision) would allow effective 12 bpc precision output.
Therefore this patch proposes reverting that commit and going back to dithering down to 10 bpc, consistent with the behaviour for 6 bpc or 8 bpc output.
Successfully tested on AMD Polaris DCE 11.2 and Raven Ridge DCN 1.0 with a native 10 bpc capable monitor, outputting a RGBA16 unorm framebuffer and measuring resulting color precision with a photometer. No apparent visual artifacts or problems were observed, and effective precision was measured to be 12 bpc again, as expected.
--- drivers/gpu/drm/amd/display/dc/core/dc_resource.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/display/dc/core/dc_resource.c +1 -1
@@ -5049,7 +5049,7 @@ void resource_build_bit_depth_reduction_ option =DITHER_OPTION_SPATIAL8 ;break ;case COLOR_DEPTH_101010 : - option =DITHER_OPTION_TRUN10 ; + option =DITHER_OPTION_SPATIAL10 ;break ;default : option =DITHER_OPTION_DISABLE ;
Greg Kroah-Hartman
maintainerPATCH 144/201 drm/gem: Fix inconsistent plane dimension calculation in drm_gem_fb_init_with_funcs()
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ashutosh Desai <[email protected]>
commit 3d4c2268bd7243c3780fe32bf24ff876da272acf upstream.
drm_gem_fb_init_with_funcs() computes sub-sampled plane dimensions using plain integer division:
unsigned int width = mode_cmd->width / (i ? info->hsub : 1); unsigned int height = mode_cmd->height / (i ? info->vsub : 1);
However, the ioctl-level framebuffer_check() in drm_framebuffer.c uses drm_format_info_plane_width/height() which round up dimensions via DIV_ROUND_UP(). This inconsistency corrupts the subsequent GEM object size check for certain pixel format and dimension combinations.
For example, with NV12 (vsub=2) and a 1-pixel-tall framebuffer the GEM size validation path sees height=0 instead of height=1. The expression (height - 1) then wraps to UINT_MAX as an unsigned int, causing min_size to overflow and wrap back to a small value. A tiny GEM object therefore passes the size guard, yet when the GPU accesses the chroma plane it will read or write memory beyond the object's bounds.
Fix by replacing the open-coded divisions with drm_format_info_plane_width() and drm_format_info_plane_height(), which use DIV_ROUND_UP() and match the calculation already used in framebuffer_check().
--- drivers/gpu/drm/drm_gem_framebuffer_helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/drm_gem_framebuffer_helper.c +2 -2
@@ -172,8 +172,8 @@ int drm_gem_fb_init_with_funcs(struct dr }for (i =0 ; i < info->num_planes; i++) { -unsigned int width = mode_cmd->width / (i ? info->hsub :1 ); -unsigned int height = mode_cmd->height / (i ? info->vsub :1 ); +unsigned int width =drm_format_info_plane_width (info, mode_cmd->width, i); +unsigned int height =drm_format_info_plane_height (info, mode_cmd->height, i);unsigned int min_size; objs[i] =drm_gem_object_lookup (file, mode_cmd->handles[i]);
Greg Kroah-Hartman
maintainerPATCH 145/201 drm/appletbdrm: Use kvzalloc for big allocations
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sasha Finkelstein <[email protected]>
commit aaaa684bab1f6d9ecfc49db328facb1771fd0eb2 upstream.
This driver is attached to a ~2000x80 screen, which is a lot more than a single page. This causes out of memory errors in some rare cases.
--- drivers/gpu/drm/tiny/appletbdrm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/tiny/appletbdrm.c +2 -2
@@ -353,7 +353,7 @@ static int appletbdrm_primary_plane_help frames_size + sizeof(struct appletbdrm_fb_request_footer), 16); - appletbdrm_state->request =kzalloc (request_size,GFP_KERNEL ); + appletbdrm_state->request =kvzalloc (request_size,GFP_KERNEL );if (!appletbdrm_state->request)return -ENOMEM ;
@@ -543,7 +543,7 @@ static void appletbdrm_primary_plane_des {struct appletbdrm_plane_state *appletbdrm_state =to_appletbdrm_plane_state (state); -kfree (appletbdrm_state->request); +kvfree (appletbdrm_state->request);kfree (appletbdrm_state->response);__drm_gem_destroy_shadow_plane_state (&appletbdrm_state->base);
Greg Kroah-Hartman
maintainerPATCH 146/201 drm/amdkfd: validate SVM ioctl nattr against buffer size
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alysa Liu <[email protected]>
commit 045e0ff208f0838a246c10204105126611b267a1 upstream.
Validate nattr field against the buffer size, preventing out-of-bounds buffer access via user-controlled attribute count.
--- drivers/gpu/drm/amd/amdkfd/kfd_chardev.c | 26 ++++++++++++++++++++++++-- drivers/gpu/drm/amd/amdkfd/kfd_priv.h | 3 +++ 2 files changed, 27 insertions(+), 2 deletions(-)
drivers/gpu/drm/amd/amdkfd/kfd_chardev.c +24 -2
@@ -25,6 +25,7 @@#include <linux/err.h> #include <linux/fs.h> #include <linux/file.h> +#include <linux/overflow.h> #include <linux/sched.h> #include <linux/slab.h> #include <linux/uaccess.h>
@@ -1695,6 +1696,16 @@ static int kfd_ioctl_smi_events(struct freturn kfd_smi_event_open (pdd->dev, &args->anon_fd); } +static int kfd_ioctl_svm_validate (void *kdata,unsigned int usize) +{ +struct kfd_ioctl_svm_args *args = kdata; +size_t expected =struct_size (args, attrs, args->nattr); + +if (expected ==SIZE_MAX || usize < expected) +return -EINVAL ; +return 0 ; +} +#if IS_ENABLED (CONFIG_HSA_AMD_SVM ) static int kfd_ioctl_set_xnack_mode(struct file *filep,
@@ -3209,7 +3220,11 @@ static int kfd_ioctl_create_process(stru#define AMDKFD_IOCTL_DEF (ioctl, _func, _flags) \ [_IOC_NR(ioctl)] = {.cmd = ioctl, .func = _func, .flags = _flags, \ - .cmd_drv = 0, .name = #ioctl} + .validate = NULL, .cmd_drv = 0, .name = #ioctl} + +#define AMDKFD_IOCTL_DEF_V (ioctl, _func, _validate, _flags) \ + [_IOC_NR(ioctl)] = {.cmd = ioctl, .func = _func, .flags = _flags, \ + .validate = _validate, .cmd_drv = 0, .name = #ioctl}/** Ioctl table */ static const struct amdkfd_ioctl_desc amdkfd_ioctls[] = {
@@ -3306,7 +3321,8 @@ static const struct amdkfd_ioctl_desc amAMDKFD_IOCTL_DEF (AMDKFD_IOC_SMI_EVENTS , kfd_ioctl_smi_events,0 ), -AMDKFD_IOCTL_DEF (AMDKFD_IOC_SVM , kfd_ioctl_svm,0 ), +AMDKFD_IOCTL_DEF_V (AMDKFD_IOC_SVM , kfd_ioctl_svm, + kfd_ioctl_svm_validate,0 ),AMDKFD_IOCTL_DEF (AMDKFD_IOC_SET_XNACK_MODE , kfd_ioctl_set_xnack_mode, 0),
@@ -3431,6 +3447,12 @@ static long kfd_ioctl(struct file *filepmemset (kdata,0 , usize); } +if (ioctl->validate) { + retcode = ioctl->validate (kdata, usize); +if (retcode) + goto err_i1; + } + retcode =func (filep, process, kdata);if (cmd &IOC_OUT )
drivers/gpu/drm/amd/amdkfd/kfd_priv.h +3 -0
@@ -1047,10 +1047,13 @@ extern struct srcu_struct kfd_processes_typedef int amdkfd_ioctl_t (struct file *filep,struct kfd_process *p,void *data); +typedef int amdkfd_ioctl_validate_t (void *kdata,unsigned int usize); +struct amdkfd_ioctl_desc {unsigned int cmd;int flags;amdkfd_ioctl_t *func; +amdkfd_ioctl_validate_t *validate;unsigned int cmd_drv;const char *name; };
Greg Kroah-Hartman
maintainerPATCH 147/201 drm/amdgpu: Avoid reset in AMDGPU unload path for APUs with GFX V11 and higher.
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shubhankar Milind Sardeshpande <[email protected]>
commit 47776ac1e3f4a2aefcf7fe7c7e4a11151b676222 upstream.
GFX V11 has GC block as default off IP.
Every time AMDGPU driver sends a request to PMFW
to unload MP1, PMFW will put GC in reset and
power down the voltage.Hence, skipping reset
for APUs with GFX V11 or later to avoid reset
related failures.
--- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +5 -1
@@ -3539,8 +3539,12 @@ static int amdgpu_device_ip_fini_early(s* that checks whether the PSP is running. A solution for those issues * in the APU is to trigger a GPU reset, but this should be done during * the unload phase to avoid adding boot latency and screen flicker. +* GFX V11 has GC block as default off IP. Every time AMDGPU driver sends +* a request to PMFW to unload MP1, PMFW will put GC in reset and power down +* the voltage. Hence, skipping reset for APUs with GFX V11 or later. */ -if ((adev->flags &AMD_IS_APU ) && !adev->gmc.is_app_apu) { +if ((adev->flags &AMD_IS_APU ) && !adev->gmc.is_app_apu && +amdgpu_ip_version (adev,GC_HWIP ,0 ) <IP_VERSION (11 ,0 ,0 )) { r =amdgpu_asic_reset (adev);if (r)dev_err (adev->dev,"asic reset on %s failed\n" , __func__);
Greg Kroah-Hartman
maintainerPATCH 130/201 drm/amdkfd: Clear VRAM on allocation to prevent stale data exposure
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Amir Shetaia <[email protected]>
commit ad52d61d82181dbdb7f05826de38352d5e550cc2 upstream.
KFD VRAM allocations set AMDGPU_GEM_CREATE_VRAM_WIPE_ON_RELEASE but not AMDGPU_GEM_CREATE_VRAM_CLEARED, leaving freshly allocated VRAM with stale data from prior use observable by compute kernels.
The GEM ioctl path already sets VRAM_CLEARED for all userspace allocations via amdgpu_gem_create_ioctl() and amdgpu_mode_dumb_create(). The KFD path was missing this flag, allowing stale page table remnants to leak into user buffers.
This causes crashes in RCCL P2P transport where non-zero data in ptrExchange/head/tail fields corrupts the protocol handshake.
--- drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c +2 -1
@@ -1735,7 +1735,8 @@ int amdgpu_amdkfd_gpuvm_alloc_memory_of_ alloc_domain =AMDGPU_GEM_DOMAIN_GTT ; alloc_flags =0 ; }else { - alloc_flags =AMDGPU_GEM_CREATE_VRAM_WIPE_ON_RELEASE ; + alloc_flags =AMDGPU_GEM_CREATE_VRAM_WIPE_ON_RELEASE | +AMDGPU_GEM_CREATE_VRAM_CLEARED ; alloc_flags |= (flags &KFD_IOC_ALLOC_MEM_FLAGS_PUBLIC ) ?AMDGPU_GEM_CREATE_CPU_ACCESS_REQUIRED :0 ;
Greg Kroah-Hartman
maintainerPATCH 148/201 drm/udl: Increase GET_URB_TIMEOUT
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shixiong Ou <[email protected]>
commit ac2c996675755c725a0065dbe3e2ebffded9080b upstream.
[WHY]
A situation has occurred where udl_handle_damage() executed successfully and the kernel log appears normal, but the display fails to show any output. This is because the call to udl_get_urb() in udl_crtc_helper_atomic_enable() failed without generating any error message.
[HOW]
1. Increase timeout of getting urb.
2. Add error messages when calling udl_get_urb() failed in udl_crtc_helper_atomic_enable().
--- drivers/gpu/drm/udl/udl_main.c | 3 +-- drivers/gpu/drm/udl/udl_modeset.c | 5 ++++- 2 files changed, 5 insertions(+), 3 deletions(-)
drivers/gpu/drm/udl/udl_main.c +1 -2
@@ -285,13 +285,12 @@ static struct urb *udl_get_urb_locked(streturn unode->urb; } -#define GET_URB_TIMEOUT HZstruct urb *udl_get_urb (struct udl_device *udl) {struct urb *urb;spin_lock_irq (&udl->urbs.lock); - urb =udl_get_urb_locked (udl,GET_URB_TIMEOUT ); + urb =udl_get_urb_locked (udl,HZ *2 );spin_unlock_irq (&udl->urbs.lock);return urb; }
drivers/gpu/drm/udl/udl_modeset.c +4 -1
@@ -21,6 +21,7 @@#include <drm/drm_gem_framebuffer_helper.h> #include <drm/drm_gem_shmem_helper.h> #include <drm/drm_modeset_helper_vtables.h> +#include <drm/drm_print.h> #include <drm/drm_probe_helper.h> #include <drm/drm_vblank.h>
@@ -342,8 +343,10 @@ static void udl_crtc_helper_atomic_enablreturn ; urb =udl_get_urb (udl); -if (!urb) +if (!urb) { +drm_err_ratelimited (dev,"get urb failed when enabling crtc\n" ); goto out; + } buf = (char *)urb->transfer_buffer; buf =udl_vidreg_lock (buf);
Greg Kroah-Hartman
maintainerPATCH 149/201 drm/xe: Fix bo leak in xe_dma_buf_init_obj() on allocation failure
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shuicheng Lin <[email protected]>
commit 93a528f67ce5095bcab46a69839eca97f43dd352 upstream.
When drm_gpuvm_resv_object_alloc() fails, the pre-allocated storage bo is not freed. Add xe_bo_free(storage) before returning the error.
xe_dma_buf_init_obj() calls xe_bo_init_locked(), which frees the bo on error. Therefore, xe_dma_buf_init_obj() must also free the bo on its own error paths. Otherwise, since xe_gem_prime_import() cannot distinguish whether the failure originated from xe_dma_buf_init_obj() or from xe_bo_init_locked(), it cannot safely decide whether the bo should be freed.
Add comments documenting the ownership semantics: on success, ownership of storage is transferred to the returned drm_gem_object; on failure, storage is freed before returning.
v2: Add comments to explain the free logic.
--- drivers/gpu/drm/xe/xe_dma_buf.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)
drivers/gpu/drm/xe/xe_dma_buf.c +11 -1
@@ -238,6 +238,13 @@ struct dma_buf *xe_gem_prime_export(strureturn buf; } +/* +* Takes ownership of @storage: on success it is transferred to the returned +* drm_gem_object; on failure it is freed before returning the error. +* This matches the contract of xe_bo_init_locked() which frees @storage on +* its error paths, so callers need not (and must not) free @storage after +* this call. +*/ static struct drm_gem_object *xe_dma_buf_init_obj (struct drm_device *dev,struct xe_bo *storage,struct dma_buf *dma_buf)
@@ -251,8 +258,10 @@ xe_dma_buf_init_obj(struct drm_device *dint ret =0 ; dummy_obj =drm_gpuvm_resv_object_alloc (&xe->drm); -if (!dummy_obj) +if (!dummy_obj) { +xe_bo_free (storage);return ERR_PTR (-ENOMEM ); + } dummy_obj->resv = resv; xe_validation_guard(&ctx, &xe->val, &exec, (struct xe_val_flags) {}, ret) {
@@ -261,6 +270,7 @@ xe_dma_buf_init_obj(struct drm_device *dif (ret)break ; +/* xe_bo_init_locked() frees storage on error */ bo =xe_bo_init_locked (xe, storage,NULL , resv,NULL , dma_buf->size,0 ,/* Will require 1way or 2way for vm_bind */ ttm_bo_type_sg,XE_BO_FLAG_SYSTEM , &exec);
Greg Kroah-Hartman
maintainerPATCH 150/201 drm/xe/bo: Fix bo leak on GGTT flag validation in xe_bo_init_locked()
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shuicheng Lin <[email protected]>
commit 1d0adf2fd94fb0c0037c643fadd8f2cf3cffc009 upstream.
When XE_BO_FLAG_GGTT_ALL is set without XE_BO_FLAG_GGTT, the function returns an error without freeing a caller-provided bo, violating the documented contract that bo is freed on failure.
Add xe_bo_free(bo) before returning the error.
--- drivers/gpu/drm/xe/xe_bo.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/gpu/drm/xe/xe_bo.c +3 -1
@@ -2154,8 +2154,10 @@ struct xe_bo *xe_bo_init_locked(struct x }/* XE_BO_FLAG_GGTTx requires XE_BO_FLAG_GGTT also be set */ -if ((flags &XE_BO_FLAG_GGTT_ALL ) && !(flags &XE_BO_FLAG_GGTT )) +if ((flags &XE_BO_FLAG_GGTT_ALL ) && !(flags &XE_BO_FLAG_GGTT )) { +xe_bo_free (bo);return ERR_PTR (-EINVAL ); + } if (flags & (XE_BO_FLAG_VRAM_MASK | XE_BO_FLAG_STOLEN) && !(flags & XE_BO_FLAG_IGNORE_MIN_PAGE_SIZE) &&
Greg Kroah-Hartman
maintainerPATCH 151/201 drm/xe: Fix dma-buf attachment leak in xe_gem_prime_import()
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shuicheng Lin <[email protected]>
commit 111ab678471bf1f90d078d5513bb086b70596c3c upstream.
When xe_dma_buf_init_obj() fails, the attachment from dma_buf_dynamic_attach() is not detached. Add dma_buf_detach() before returning the error. Note: we cannot use goto out_err here because xe_dma_buf_init_obj() already frees bo on failure, and out_err would double-free it.
--- drivers/gpu/drm/xe/xe_dma_buf.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-)
drivers/gpu/drm/xe/xe_dma_buf.c +7 -4
@@ -358,12 +358,15 @@ struct drm_gem_object *xe_gem_prime_impo goto out_err; } -/* Errors here will take care of freeing the bo. */ +/* +* xe_dma_buf_init_obj() takes ownership of bo on both success +* and failure, so we must not touch bo after this call. +*/ obj =xe_dma_buf_init_obj (dev, bo, dma_buf); -if (IS_ERR (obj)) +if (IS_ERR (obj)) { +dma_buf_detach (dma_buf, attach);return obj; - - + }get_dma_buf (dma_buf); obj->import_attach = attach;return obj;
Greg Kroah-Hartman
maintainerPATCH 152/201 drm/xe/bo: Fix bo leak on unaligned size validation in xe_bo_init_locked()
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shuicheng Lin <[email protected]>
commit 09a8f3c1c11977a6e10c167f26dd298790b31c32 upstream.
When type is ttm_bo_type_device and aligned_size != size, the function returns an error without freeing a caller-provided bo, violating the documented contract that bo is freed on failure.
Add xe_bo_free(bo) before returning the error.
--- drivers/gpu/drm/xe/xe_bo.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/gpu/drm/xe/xe_bo.c +3 -1
@@ -2176,8 +2176,10 @@ struct xe_bo *xe_bo_init_locked(struct x alignment =SZ_4K >>PAGE_SHIFT ; } -if (type == ttm_bo_type_device && aligned_size != size) +if (type == ttm_bo_type_device && aligned_size != size) { +xe_bo_free (bo);return ERR_PTR (-EINVAL ); + }if (!bo) { bo =xe_bo_alloc ();
Greg Kroah-Hartman
maintainerPATCH 153/201 drm/xe/uapi: Reject coh_none PAT index for CPU cached memory in madvise
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jia Yao <[email protected]>
commit 4e5591c2fc1b30f4ea5e2eab4c3a695acc404e39 upstream.
Add validation in xe_vm_madvise_ioctl() to reject PAT indices with XE_COH_NONE coherency mode when applied to CPU cached memory.
Using coh_none with CPU cached buffers is a security issue. When the kernel clears pages before reallocation, the clear operation stays in CPU cache (dirty). GPU with coh_none can bypass CPU caches and read stale sensitive data directly from DRAM, potentially leaking data from previously freed pages of other processes.
This aligns with the existing validation in vm_bind path (xe_vm_bind_ioctl_validate_bo).
v2(Matthew brost)
- Add fixes
- Move one debug print to better place
v3(Matthew Auld)
- Should be drm/xe/uapi
- More Cc
v4(Shuicheng Lin)
- Fix kmem leak issues by the way
v5
- Remove kmem leak because it has been merged by another patch
v6
- Remove the fix which is not related to current fix
v7
- No change
v8
- Rebase
v9
- Limit the restrictions to iGPU
v10
- No change
--- drivers/gpu/drm/xe/xe_vm_madvise.c | 47 +++++++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+)
drivers/gpu/drm/xe/xe_vm_madvise.c +47 -0
@@ -357,6 +357,45 @@ static void xe_madvise_details_fini(strudrm_pagemap_put (details->dpagemap); } +static bool check_pat_args_are_sane (struct xe_device *xe, +struct xe_vmas_in_madvise_range *madvise_range, +u16 pat_index) +{ +u16 coh_mode =xe_pat_index_get_coh_mode (xe, pat_index); +int i; + +/* +* Using coh_none with CPU cached buffers is not allowed on iGPU. +* On iGPU the GPU shares the LLC with the CPU, so with coh_none +* the GPU bypasses CPU caches and reads directly from DRAM, +* potentially seeing stale sensitive data from previously freed +* pages. On dGPU this restriction does not apply, because the +* platform does not provide a non-coherent system memory access +* path that would violate the DMA coherency contract. +*/ +if (coh_mode !=XE_COH_NONE ||IS_DGFX (xe)) +return true; + +for (i =0 ; i < madvise_range->num_vmas; i++) { +struct xe_vma *vma = madvise_range->vmas[i]; +struct xe_bo *bo =xe_vma_bo (vma); + +if (bo) { +/* BO with WB caching + COH_NONE is not allowed */ +if (XE_IOCTL_DBG (xe, bo->cpu_caching ==DRM_XE_GEM_CPU_CACHING_WB )) +return false; +/* Imported dma-buf without caching info, assume cached */ +if (XE_IOCTL_DBG (xe, !bo->cpu_caching)) +return false; + }else if (XE_IOCTL_DBG (xe,xe_vma_is_cpu_addr_mirror (vma) || +xe_vma_is_userptr (vma))) +/* System memory (userptr/SVM) is always CPU cached */ +return false; + } + +return true; +} +static bool check_bo_args_are_sane (struct xe_vm *vm,struct xe_vma **vmas,int num_vmas,u32 atomic_val) {
@@ -454,6 +493,14 @@ int xe_vm_madvise_ioctl(struct drm_devicif (err || !madvise_range.num_vmas) goto madv_fini; +if (args->type ==DRM_XE_MEM_RANGE_ATTR_PAT ) { +if (!check_pat_args_are_sane (xe, &madvise_range, + args->pat_index.val)) { + err = -EINVAL ; + goto free_vmas; + } + } + if (madvise_range.has_bo_vmas) { if (args->type == DRM_XE_MEM_RANGE_ATTR_ATOMIC) { if (!check_bo_args_are_sane(vm, madvise_range.vmas,
Greg Kroah-Hartman
maintainerPATCH 154/201 drm: Set old handle to NULL before prime swap in change_handle
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Francis, David <[email protected]>
commit 5e28b7b94408897e41c63477aabc9e1db439bc8c upstream.
There was a potential race condition in change_handle. The ioctl briefly had a single object with two idr entries; a concurrent gem_close could delete the object and remove one of the handles while leaving the other one dangling, which could subsequently be dereferenced for a use-after-free.
To fix this, do the same dance that gem_close itself does.
(f6cd7daecff5 drm: Release driver references to handle before making it available again) First idr_replace the old handle to NULL. Later, if the prime
operations are successful, actually close it.
create_tail required a similar dance to avoid a similar problem. (bd46cece51a3 drm/gem: Fix race in drm_gem_handle_create_tail()) It idr_allocs the new handle with NULL, then swaps in the correct object later to avoid races. We don't need to do that here, since the only operations that could race are drm_prime, and change_handle holds the prime lock for the entire duration.
v2: cleanups of error paths
--- drivers/gpu/drm/drm_gem.c | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-)
drivers/gpu/drm/drm_gem.c +24 -1
@@ -1001,7 +1001,7 @@ int drm_gem_change_handle_ioctl(struct d struct drm_file *file_priv) {struct drm_gem_change_handle *args = data; -struct drm_gem_object *obj; +struct drm_gem_object *obj, *idrobj;int handle, ret;if (!drm_core_check_feature (dev,DRIVER_GEM ))
@@ -1024,8 +1024,29 @@ int drm_gem_change_handle_ioctl(struct dmutex_lock (&file_priv->prime.lock);spin_lock (&file_priv->table_lock); + +/* When create_tail allocs an obj idr, it needs to first alloc as NULL, +* then later replace with the correct object. This is not necessary +* here, because the only operations that could race are drm_prime +* bookkeeping, and we hold the prime lock. +*/ ret =idr_alloc (&file_priv->object_idr, obj, handle, handle +1 ,GFP_NOWAIT ); + +if (ret <0 ) { +spin_unlock (&file_priv->table_lock); + goto out_unlock; + } + + idrobj =idr_replace (&file_priv->object_idr,NULL , handle); +if (idrobj != obj) { +idr_replace (&file_priv->object_idr, idrobj, handle); +idr_remove (&file_priv->object_idr, args->new_handle); +spin_unlock (&file_priv->table_lock); + ret = -ENOENT ; + goto out_unlock; + } +spin_unlock (&file_priv->table_lock);if (ret <0 )
@@ -1037,6 +1058,8 @@ int drm_gem_change_handle_ioctl(struct dif (ret <0 ) {spin_lock (&file_priv->table_lock);idr_remove (&file_priv->object_idr, handle); + idrobj =idr_replace (&file_priv->object_idr, obj, handle); +WARN_ON (idrobj !=NULL );spin_unlock (&file_priv->table_lock); goto out_unlock; }
Greg Kroah-Hartman
maintainerPATCH 155/201 drm/radeon: add missing revision check for CI
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <[email protected]>
commit 17223816498f7b117d138d18eb0eba63604dc74e upstream.
The memory level workarounds only apply to revision 0 SKUs.
--- drivers/gpu/drm/radeon/ci_dpm.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/gpu/drm/radeon/ci_dpm.c +6 -3
@@ -2461,7 +2461,8 @@ static void ci_register_patching_mc_arb(if (patch && ((rdev->pdev->device ==0x67B0 ) || - (rdev->pdev->device ==0x67B1 ))) { + (rdev->pdev->device ==0x67B1 )) && + (rdev->pdev->revision ==0 )) {if ((memory_clock >100000 ) && (memory_clock <=125000 )) { tmp2 = (((0x31 * engine_clock) /125000 ) -1 ) &0xff ; *dram_timimg2 &= ~0x00ff0000 ;
@@ -3304,7 +3305,8 @@ static int ci_populate_all_memory_levels pi->smc_state_table.MemoryLevel[0 ].EnabledForActivity =1 ;if ((dpm_table->mclk_table.count >=2 ) && - ((rdev->pdev->device ==0x67B0 ) || (rdev->pdev->device ==0x67B1 ))) { + ((rdev->pdev->device ==0x67B0 ) || (rdev->pdev->device ==0x67B1 )) && + (rdev->pdev->revision ==0 )) { pi->smc_state_table.MemoryLevel[1 ].MinVddc = pi->smc_state_table.MemoryLevel[0 ].MinVddc; pi->smc_state_table.MemoryLevel[1].MinVddcPhases =
@@ -4493,7 +4495,8 @@ static int ci_register_patching_mc_seq(sif (patch && ((rdev->pdev->device ==0x67B0 ) || - (rdev->pdev->device ==0x67B1 ))) { + (rdev->pdev->device ==0x67B1 )) && + (rdev->pdev->revision ==0 )) {for (i =0 ; i < table->last; i++) {if (table->last >=SMU7_DISCRETE_MC_REGISTER_ARRAY_SIZE )return -EINVAL ;
Greg Kroah-Hartman
maintainerPATCH 156/201 drm/amdgpu: zero-initialize GART table on allocation
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Philip Yang <[email protected]>
commit e6c2e6c2e1fa066968a16aca1cb66cd1bdde7741 upstream.
GART TLB is flushed after unmapping but not after mapping. Since amdgpu_bo_create_kernel() does not zero-initialize the buffer, when a single PTE is written the TLB may speculatively load other uninitialized entries from the same cacheline. Those garbage entries can appear valid, and a subsequent write to another PTE in the same cacheline may cause the GPU to use a stale garbage PTE from the TLB.
Fix this by calling memset_io() to zero-initialize the GART table with gart_pte_flags immediately after allocation.
Using AMDGPU_GEM_CREATE_VRAM_CLEARED, SDMA-based clear will not work since SDMA needs GART to be initialized to work.
--- drivers/gpu/drm/amd/amdgpu/amdgpu_gart.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_gart.c +10 -3
@@ -262,12 +262,19 @@ void amdgpu_gart_table_ram_free(struct a*/ int amdgpu_gart_table_vram_alloc (struct amdgpu_device *adev) { +int r; +if (adev->gart.bo !=NULL )return 0 ; -return amdgpu_bo_create_kernel (adev, adev->gart.table_size,PAGE_SIZE , -AMDGPU_GEM_DOMAIN_VRAM , &adev->gart.bo, -NULL , (void *)&adev->gart.ptr); + r =amdgpu_bo_create_kernel (adev, adev->gart.table_size,PAGE_SIZE , +AMDGPU_GEM_DOMAIN_VRAM , &adev->gart.bo, +NULL , (void *)&adev->gart.ptr); +if (r) +return r; + +memset_io (adev->gart.ptr, adev->gart.gart_pte_flags, adev->gart.table_size); +return 0 ; }/**
Greg Kroah-Hartman
maintainerPATCH 157/201 drm/exynos: remove bridge when component_add fails
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Osama Abdelkader <[email protected]>
commit 26f6654a9a60eb4d241f42a0ec85412e8821480b upstream.
Use devm_drm_bridge_add() so the bridge is released if probe fails after registration, and drop the manual drm_bridge_remove() in remove().
Check the return value of devm_drm_bridge_add().
--- drivers/gpu/drm/exynos/exynos_drm_mic.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)
drivers/gpu/drm/exynos/exynos_drm_mic.c +3 -5
@@ -423,7 +423,9 @@ static int exynos_mic_probe(struct platf mic->bridge.of_node = dev->of_node; -drm_bridge_add (&mic->bridge); + ret =devm_drm_bridge_add (dev, &mic->bridge); +if (ret) + goto err;pm_runtime_enable (dev);
@@ -443,12 +445,8 @@ err:static void exynos_mic_remove (struct platform_device *pdev) { -struct exynos_mic *mic =platform_get_drvdata (pdev); -component_del (&pdev->dev, &exynos_mic_component_ops);pm_runtime_disable (&pdev->dev); - -drm_bridge_remove (&mic->bridge); }static const struct of_device_id exynos_mic_of_match[] = {
Greg Kroah-Hartman
maintainerPATCH 131/201 drm/amd/display: fix math_mod() using arg1 instead of arg2
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wenjing Liu <[email protected]>
commit 2b104fc31be0607c04188fadbd4a9fa5b50f3b99 upstream.
[Why]math_mod() multiplied by arg1 instead of arg2, returning a wrong result for any non-trivial modulo operation.
[How]
Replace arg1 with arg2 in the subtraction term to correctly implement fmod(arg1, arg2).
--- drivers/gpu/drm/amd/display/dc/dml2_0/dml21/src/dml2_standalone_libraries/lib_float_math.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/display/dc/dml2_0/dml21/src/dml2_standalone_libraries/lib_float_math.c +1 -1
@@ -23,7 +23,7 @@ double math_mod(const double arg1, constreturn arg2;if (isNaN (arg2))return arg1; -return arg1 - arg1 * ((int )(arg1 / arg2)); +return arg1 - arg2 * ((int )(arg1 / arg2)); }double math_min2 (const double arg1,const double arg2)
Greg Kroah-Hartman
maintainerPATCH 158/201 drm/amdgpu/userq: fix access to stale wptr mapping
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sunil Khatri <[email protected]>
commit 6da7b1242da4455b11c24ce667d1cab1a348c8ea upstream.
Use drm_exec to take both locks i.e vm root bo and wptr_obj bo to access the mapping data properly.
This fixes the security issue of unmap the wptr_obj while a queue creation is in progress and passing other bo at same address.
--- drivers/gpu/drm/amd/amdgpu/mes_userqueue.c | 95 +++++++++++------------------ 1 file changed, 37 insertions(+), 58 deletions(-)
drivers/gpu/drm/amd/amdgpu/mes_userqueue.c +37 -58
@@ -31,89 +31,68 @@#define AMDGPU_USERQ_GANG_CTX_SZ PAGE_SIZEstatic int -mes_userq_map_gtt_bo_to_gart (struct amdgpu_bo *bo) -{ -int ret; - - ret =amdgpu_bo_reserve (bo, true); -if (ret) { -DRM_ERROR ("Failed to reserve bo. ret %d\n" , ret); - goto err_reserve_bo_failed; - } - - ret =amdgpu_ttm_alloc_gart (&bo->tbo); -if (ret) { -DRM_ERROR ("Failed to bind bo to GART. ret %d\n" , ret); - goto err_map_bo_gart_failed; - } - -amdgpu_bo_unreserve (bo); - bo =amdgpu_bo_ref (bo); - -return 0 ; - -err_map_bo_gart_failed: -amdgpu_bo_unreserve (bo); -err_reserve_bo_failed: -return ret; -} - -static int mes_userq_create_wptr_mapping (struct amdgpu_device *adev,struct amdgpu_userq_mgr *uq_mgr,struct amdgpu_usermode_queue *queue,uint64_t wptr) {struct amdgpu_bo_va_mapping *wptr_mapping; -struct amdgpu_vm *wptr_vm;struct amdgpu_userq_obj *wptr_obj = &queue->wptr_obj; +struct amdgpu_bo *obj; +struct amdgpu_vm *vm = queue->vm; +struct drm_exec exec;int ret; - wptr_vm = queue->vm; - ret =amdgpu_bo_reserve (wptr_vm->root.bo, false); -if (ret) -return ret; - wptr &=AMDGPU_GMC_HOLE_MASK ; - wptr_mapping =amdgpu_vm_bo_lookup_mapping (wptr_vm, wptr >>PAGE_SHIFT ); -amdgpu_bo_unreserve (wptr_vm->root.bo); -if (!wptr_mapping) { -DRM_ERROR ("Failed to lookup wptr bo\n" ); -return -EINVAL ; - } - wptr_obj->obj = wptr_mapping->bo_va->base.bo; -if (wptr_obj->obj->tbo.base.size >PAGE_SIZE ) { -DRM_ERROR ("Requested GART mapping for wptr bo larger than one page\n" ); -return -EINVAL ; +drm_exec_init (&exec,DRM_EXEC_IGNORE_DUPLICATES ,2 ); + drm_exec_until_all_locked(&exec) { + ret =amdgpu_vm_lock_pd (vm, &exec,1 ); +drm_exec_retry_on_contention (&exec); +if (unlikely (ret)) + goto fail_lock; + + wptr_mapping =amdgpu_vm_bo_lookup_mapping (vm, wptr >>PAGE_SHIFT ); +if (!wptr_mapping) { + ret = -EINVAL ; + goto fail_lock; + } + + obj = wptr_mapping->bo_va->base.bo; + ret =drm_exec_lock_obj (&exec, &obj->tbo.base); +drm_exec_retry_on_contention (&exec); +if (unlikely (ret)) + goto fail_lock; } - ret =mes_userq_map_gtt_bo_to_gart (wptr_obj->obj); -if (ret) { -DRM_ERROR ("Failed to map wptr bo to GART\n" ); -return ret; + wptr_obj->obj =amdgpu_bo_ref (wptr_mapping->bo_va->base.bo); +if (wptr_obj->obj->tbo.base.size >PAGE_SIZE ) { + ret = -EINVAL ; + goto fail_map; } - ret =amdgpu_bo_reserve (wptr_obj->obj, true); +/* TODO use eviction fence instead of pinning. */ + ret =amdgpu_bo_pin (wptr_obj->obj,AMDGPU_GEM_DOMAIN_GTT );if (ret) { -DRM_ERROR ("Failed to reserve wptr bo\n" ); -return ret; +DRM_ERROR ("Failed to pin wptr bo. ret %d\n" , ret); + goto fail_map; } -/* TODO use eviction fence instead of pinning. */ - ret =amdgpu_bo_pin (wptr_obj->obj,AMDGPU_GEM_DOMAIN_GTT ); + ret =amdgpu_ttm_alloc_gart (&wptr_obj->obj->tbo);if (ret) { -drm_file_err (uq_mgr->file,"[Usermode queues] Failed to pin wptr bo\n" ); - goto unresv_bo; +DRM_ERROR ("Failed to bind bo to GART. ret %d\n" , ret); + goto fail_map; } queue->wptr_obj.gpu_addr =amdgpu_bo_gpu_offset (wptr_obj->obj); -amdgpu_bo_unreserve (wptr_obj->obj); +drm_exec_fini (&exec);return 0 ; -unresv_bo: -amdgpu_bo_unreserve (wptr_obj->obj); +fail_map: +amdgpu_bo_unref (&wptr_obj->obj); +fail_lock: +drm_exec_fini (&exec);return ret; }
Greg Kroah-Hartman
maintainerPATCH 159/201 drm/panel: himax-hx83102: restore MODE_LPM after sending disable cmds
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Icenowy Zheng <[email protected]>
commit 2d4e80271f784aa0c7b17676e9762c7e8156be1c upstream.
When preparing the panel, it seems that it always expects commands to be transferred in LP mode. However, the disable function removes the MIPI_DSI_MODE_LPM flag, and no other function re-adds it.
As the unprepare function contains no DSI commands, re-adding the flag just after disabling the panel should be safe. Add the code re-adding the flag after the two commands for disabling the panel are sent.
This fixes screen unblanking (after blanking once) on mt8188-geralt-ciri-sku1 device.
--- drivers/gpu/drm/panel/panel-himax-hx83102.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/gpu/drm/panel/panel-himax-hx83102.c +2 -0
@@ -850,6 +850,8 @@ static int hx83102_disable(struct drm_pamipi_dsi_dcs_set_display_off_multi (&dsi_ctx);mipi_dsi_dcs_enter_sleep_mode_multi (&dsi_ctx); + dsi->mode_flags |=MIPI_DSI_MODE_LPM ; +mipi_dsi_msleep (&dsi_ctx,150 );return dsi_ctx.accum_err;
Greg Kroah-Hartman
maintainerPATCH 160/201 drm/amdgpu/gfx9: drop unnecessary 64-bit fence flag check in KIQ
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: John B. Moore <[email protected]>
commit 7bbfb2559bcec39d1a4e1182d931a2046112c352 upstream.
Remove the BUG_ON(flags & AMDGPU_FENCE_FLAG_64BIT) assertion from gfx_v9_0_ring_emit_fence_kiq(). The KIQ hardware supports 64-bit fence writes; the 32-bit writeback address constraint is an upper-layer convention, not a hardware limitation. The check serves no purpose and should not be present.
Found by code inspection while investigating related BUG_ON assertions in the GFX and compute ring emission paths.
--- drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 3 --- 1 file changed, 3 deletions(-)
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c +0 -3
@@ -5660,9 +5660,6 @@ static void gfx_v9_0_ring_emit_fence_kiq {struct amdgpu_device *adev = ring->adev; -/* we only allocate 32bit for each seq wb address */ -BUG_ON (flags &AMDGPU_FENCE_FLAG_64BIT ); -/* write fence seq to the "addr" */ amdgpu_ring_write (ring,PACKET3 (PACKET3_WRITE_DATA ,3 )); amdgpu_ring_write(ring, (WRITE_DATA_ENGINE_SEL(0) |
Greg Kroah-Hartman
maintainerPATCH 161/201 drm/bridge: tda998x: Use __be32 for audio port OF property pointer
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kory Maincent (TI) <[email protected]>
commit 2a46a9356ba7b1bdd741c8b41e5374edcd960557 upstream.
of_get_property() returns a pointer to big-endian (__be32) data, but port_data in tda998x_get_audio_ports() was declared as const u32 *, causing a sparse endianness type mismatch warning. Fix the declaration to use const __be32 *.
--- drivers/gpu/drm/bridge/tda998x_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/bridge/tda998x_drv.c +1 -1
@@ -1697,7 +1697,7 @@ static const struct drm_bridge_funcs tdastatic int tda998x_get_audio_ports (struct tda998x_priv *priv,struct device_node *np) { -const u32 *port_data; +const __be32 *port_data;u32 size;int i;
Greg Kroah-Hartman
maintainerPATCH 162/201 drm/sti: remove bridge when sti_hda component_add fails
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Osama Abdelkader <[email protected]>
commit 84ae1840260fece9b6b70d3872b79384bbe5a90b upstream.
Use devm_drm_bridge_add() so the bridge is released if probe fails after registration, and drop the manual drm_bridge_remove() in remove().
Check the return value of devm_drm_bridge_add().
--- drivers/gpu/drm/sti/sti_hda.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/gpu/drm/sti/sti_hda.c +4 -4
@@ -741,6 +741,7 @@ static int sti_hda_probe(struct platform_device *pdev)struct device *dev = &pdev->dev;struct sti_hda *hda;struct resource *res; +int ret;DRM_INFO ("%s\n" , __func__);
@@ -779,7 +780,9 @@ static int sti_hda_probe(struct platform_device *pdev)return PTR_ERR (hda->clk_hddac); } -drm_bridge_add (&hda->bridge); + ret =devm_drm_bridge_add (dev, &hda->bridge); +if (ret) +return ret;platform_set_drvdata (pdev, hda);
@@ -788,10 +791,7 @@ static int sti_hda_probe(struct platform_device *pdev)static void sti_hda_remove (struct platform_device *pdev) { -struct sti_hda *hda =platform_get_drvdata (pdev); -component_del (&pdev->dev, &sti_hda_ops); -drm_bridge_remove (&hda->bridge); }static const struct of_device_id hda_of_match[] = {
Signature · 1 line
2.54.0
Greg Kroah-Hartman
maintainerPATCH 163/201 drm/panel: boe-tv101wum-nl6: restore MODE_LPM after sending disable cmds
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Icenowy Zheng <[email protected]>
commit 570cf799e87ae805eacfab3b4ba66676b5fccdb6 upstream.
When preparing the panel, it seems that it always expects commands to be transferred in LP mode. However, the disable function removes the MIPI_DSI_MODE_LPM flag, and no other function re-adds it.
As the unprepare function contains no DSI commands, re-adding the flag just after disabling the panel should be safe. Add the code re-adding the flag after the two commands for disabling the panel are sent.
This fixes error messages shown in kernel log when unblanking on mt8183-kukui-kodama-sku32 device.
--- drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c +2 -0
@@ -1324,6 +1324,8 @@ static int boe_panel_disable(struct drm_mipi_dsi_dcs_set_display_off_multi (&ctx);mipi_dsi_dcs_enter_sleep_mode_multi (&ctx); + boe->dsi->mode_flags |=MIPI_DSI_MODE_LPM ; +mipi_dsi_msleep (&ctx,150 );return ctx.accum_err;
Greg Kroah-Hartman
maintainerPATCH 164/201 drm/amdkfd: Make all TLB-flushes heavy-weight
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Felix Kuehling <[email protected]>
commit 9b4e3495d1bd2469bf94b74930c153c2d534ddb7 upstream.
With only one sequence number we cannot track the need for legacy vs heavy-weight flushes reliably. Always use heavy-weight.
--- drivers/gpu/drm/amd/amdkfd/kfd_chardev.c | 4 ++-- drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c | 6 +++--- drivers/gpu/drm/amd/amdkfd/kfd_priv.h | 6 +++--- drivers/gpu/drm/amd/amdkfd/kfd_svm.c | 4 ++-- 4 files changed, 10 insertions(+), 10 deletions(-)
drivers/gpu/drm/amd/amdkfd/kfd_chardev.c +2 -2
@@ -1360,7 +1360,7 @@ static int kfd_ioctl_map_memory_to_gpu(s peer_pdd =kfd_process_device_data_by_id (p, devices_arr[i]);if (WARN_ON_ONCE (!peer_pdd))continue ; -kfd_flush_tlb (peer_pdd,TLB_FLUSH_LEGACY ); +kfd_flush_tlb (peer_pdd); }kfree (devices_arr);
@@ -1455,7 +1455,7 @@ static int kfd_ioctl_unmap_memory_from_gif (WARN_ON_ONCE (!peer_pdd))continue ;if (flush_tlb) -kfd_flush_tlb (peer_pdd,TLB_FLUSH_HEAVYWEIGHT ); +kfd_flush_tlb (peer_pdd);/* Remove dma mapping after tlb flush to avoid IO_PAGE_FAULT */ err =amdgpu_amdkfd_gpuvm_dmaunmap_mem (mem, peer_pdd->drm_priv);
drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c +3 -3
@@ -572,7 +572,7 @@ static int allocate_vmid(struct device_q qpd->vmid, qpd->page_table_base);/* invalidate the VM context after pasid and vmid mapping is set up */ -kfd_flush_tlb (qpd_to_pdd (qpd),TLB_FLUSH_LEGACY ); +kfd_flush_tlb (qpd_to_pdd (qpd));if (dqm->dev->kfd2kgd->set_scratch_backing_va) dqm->dev->kfd2kgd->set_scratch_backing_va(dqm->dev->adev,
@@ -610,7 +610,7 @@ static void deallocate_vmid(struct devicif (flush_texture_cache_nocpsch (q->device, qpd))dev_err (dev,"Failed to flush TC\n" ); -kfd_flush_tlb (qpd_to_pdd (qpd),TLB_FLUSH_LEGACY ); +kfd_flush_tlb (qpd_to_pdd (qpd));/* Release the vmid mapping */ set_pasid_vmid_mapping (dqm,0 , qpd->vmid);
@@ -1284,7 +1284,7 @@ static int restore_process_queues_nocpsc dqm->dev->adev, qpd->vmid, qpd->page_table_base); -kfd_flush_tlb (pdd,TLB_FLUSH_LEGACY ); +kfd_flush_tlb (pdd); }/* Take a safe reference to the mm_struct, which may otherwise
drivers/gpu/drm/amd/amdkfd/kfd_priv.h +3 -3
@@ -1554,13 +1554,13 @@ void kfd_signal_reset_event(struct kfd_nvoid kfd_signal_poison_consumed_event (struct kfd_node *dev,u32 pasid);void kfd_signal_process_terminate_event (struct kfd_process *p); -static inline void kfd_flush_tlb (struct kfd_process_device *pdd, -enum TLB_FLUSH_TYPE type) +static inline void kfd_flush_tlb (struct kfd_process_device *pdd) {struct amdgpu_device *adev = pdd->dev->adev;struct amdgpu_vm *vm =drm_priv_to_vm (pdd->drm_priv); -amdgpu_vm_flush_compute_tlb (adev, vm, type, pdd->dev->xcc_mask); +amdgpu_vm_flush_compute_tlb (adev, vm,TLB_FLUSH_HEAVYWEIGHT , + pdd->dev->xcc_mask); }static inline bool kfd_flush_tlb_after_unmap (struct kfd_dev *dev)
drivers/gpu/drm/amd/amdkfd/kfd_svm.c +2 -2
@@ -1415,7 +1415,7 @@ svm_range_unmap_from_gpus(struct svm_ranif (r)break ; } -kfd_flush_tlb (pdd,TLB_FLUSH_HEAVYWEIGHT ); +kfd_flush_tlb (pdd); }return r;
@@ -1557,7 +1557,7 @@ svm_range_map_to_gpus(struct svm_range * } } -kfd_flush_tlb (pdd,TLB_FLUSH_LEGACY ); +kfd_flush_tlb (pdd); }return r;
Greg Kroah-Hartman
maintainerPATCH 165/201 drm/amdgpu/sdma4: replace BUG_ON with WARN_ON in fence emission
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: John B. Moore <[email protected]>
commit 78d2e624fa073c14970aa097adcf3ea31c157a66 upstream.
sdma_v4_0_ring_emit_fence() contains two BUG_ON(addr & 0x3) assertions that verify fence writeback addresses are dword-aligned. These assertions can be reached from unprivileged userspace via crafted DRM_IOCTL_AMDGPU_CS submissions, causing a fatal kernel panic in a scheduler worker thread.
Replace both BUG_ON() calls with WARN_ON() to log the condition without crashing the kernel. A misaligned fence address at this point indicates a driver bug, but crashing the kernel is never the correct response when the assertion is reachable from userspace.
The CS IOCTL path is the correct place to filter invalid submissions; the ring emission callback is too late to do anything about it.
--- drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c +2 -2
@@ -890,7 +890,7 @@ static void sdma_v4_0_ring_emit_fence(st/* write the fence */ amdgpu_ring_write (ring,SDMA_PKT_HEADER_OP (SDMA_OP_FENCE ));/* zero in first two bits */ -BUG_ON (addr &0x3 ); +WARN_ON (addr &0x3 );amdgpu_ring_write (ring,lower_32_bits (addr));amdgpu_ring_write (ring,upper_32_bits (addr));amdgpu_ring_write (ring,lower_32_bits (seq));
@@ -900,7 +900,7 @@ static void sdma_v4_0_ring_emit_fence(st addr +=4 ;amdgpu_ring_write (ring,SDMA_PKT_HEADER_OP (SDMA_OP_FENCE ));/* zero in first two bits */ -BUG_ON (addr &0x3 ); +WARN_ON (addr &0x3 );amdgpu_ring_write (ring,lower_32_bits (addr));amdgpu_ring_write (ring,upper_32_bits (addr));amdgpu_ring_write (ring,upper_32_bits (seq));
Greg Kroah-Hartman
maintainerPATCH 166/201 drm/amdgpu/pm: add missing revision check for CI
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <[email protected]>
commit 2a561b361b7681509710f3cfc3d95d54c87ac69f upstream.
The ci_populate_all_memory_levels() workaround only applies to revision 0 SKUs.
--- drivers/gpu/drm/amd/pm/powerplay/smumgr/ci_smumgr.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/gpu/drm/amd/pm/powerplay/smumgr/ci_smumgr.c +3 -2
@@ -1326,8 +1326,9 @@ static int ci_populate_all_memory_levels dev_id = adev->pdev->device; -if ((dpm_table->mclk_table.count >=2 ) - && ((dev_id ==0x67B0 ) || (dev_id ==0x67B1 ))) { +if ((dpm_table->mclk_table.count >=2 ) && + ((dev_id ==0x67B0 ) || (dev_id ==0x67B1 )) && + (adev->pdev->revision ==0 )) { smu_data->smc_state_table.MemoryLevel[1 ].MinVddci = smu_data->smc_state_table.MemoryLevel[0 ].MinVddci; smu_data->smc_state_table.MemoryLevel[1].MinMvdd =
Greg Kroah-Hartman
maintainerPATCH 167/201 drm/amdgpu/pm: align Hawaii mclk workaround with radeon
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <[email protected]>
commit 1987c79b4fe5789dfa14423e78b5c25f6acf3e9d upstream.
Align the hawaii mclk workaround with radeon and windows.
--- drivers/gpu/drm/amd/pm/powerplay/smumgr/ci_smumgr.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/gpu/drm/amd/pm/powerplay/smumgr/ci_smumgr.c +4 -4
@@ -1329,10 +1329,10 @@ static int ci_populate_all_memory_levelsif ((dpm_table->mclk_table.count >=2 ) && ((dev_id ==0x67B0 ) || (dev_id ==0x67B1 )) && (adev->pdev->revision ==0 )) { - smu_data->smc_state_table.MemoryLevel[1 ].MinVddci = - smu_data->smc_state_table.MemoryLevel[0 ].MinVddci; - smu_data->smc_state_table.MemoryLevel[1 ].MinMvdd = - smu_data->smc_state_table.MemoryLevel[0 ].MinMvdd; + smu_data->smc_state_table.MemoryLevel[1 ].MinVddc = + smu_data->smc_state_table.MemoryLevel[0 ].MinVddc; + smu_data->smc_state_table.MemoryLevel[1 ].MinVddcPhases = + smu_data->smc_state_table.MemoryLevel[0 ].MinVddcPhases; } smu_data->smc_state_table.MemoryLevel[0 ].ActivityLevel =0x1F ;CONVERT_FROM_HOST_TO_SMC_US (smu_data->smc_state_table.MemoryLevel[0 ].ActivityLevel);
Greg Kroah-Hartman
maintainerPATCH 132/201 drm/amd: Add missing firmware declaration for PSP v15.0.0
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mario Limonciello <[email protected]>
commit 2744103f58e8e03ce675c670bbfe3f46034e5f24 upstream.
PSP v15.0.0 needs both TOC and TA firmware. Without the declaration it won't get included in initramfs and leads to following failure:
``` Direct firmware load for amdgpu/psp_15_0_0_ta.bin failed with error -2 early_init of IP block <psp> failed -19 Fatal error during GPU init ```
--- drivers/gpu/drm/amd/amdgpu/psp_v15_0.c | 1 + 1 file changed, 1 insertion(+)
drivers/gpu/drm/amd/amdgpu/psp_v15_0.c +1 -0
@@ -32,6 +32,7 @@#include "mp/mp_15_0_0_sh_mask.h" MODULE_FIRMWARE ("amdgpu/psp_15_0_0_toc.bin" ); +MODULE_FIRMWARE ("amdgpu/psp_15_0_0_ta.bin" );static int psp_v15_0_0_init_microcode (struct psp_context *psp) {
Greg Kroah-Hartman
maintainerPATCH 168/201 arm64: dts: qcom: kodiak: Fix PCIe1 PHY ref clock voting
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krishna Chaitanya Chundru <[email protected]>
commit 30e8b6d42e8988eaaf0c2efd8c3797cb3884faea upstream.
GCC_PCIE_CLKREF_EN controls a repeater that provides the reference clock only to the PCIe0 PHY. PCIe1 PHY receives its refclk directly from the CXO source.
If the PCIe1 driver in HLOS votes for or against GCC_PCIE_CLKREF_EN, it will inadvertently modify the refclk to PCIe0 as well. Since PCIe0 is managed by WPSS while PCIe1 is managed in HLOS, there is no mechanism to coordinate these votes. As a result, HLOS may disable this repeater during suspend and cut off the PCIe0 PHY refclk while PCIe0 is still active.
Replace the unused GCC_PCIE_CLKREF_EN clock entry with RPMH_CXO_CLK to reflect the actual hardware wiring and prevent unintended changes to PCIe0 clocking.
--- arch/arm64/boot/dts/qcom/kodiak.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/qcom/kodiak.dtsi +1 -1
@@ -2445,7 +2445,7 @@ reg = <0 0x01c0e000 0 0x1000>; clocks = <&gcc GCC_PCIE_1_AUX_CLK>, <&gcc GCC_PCIE_1_CFG_AHB_CLK>, - <&gcc GCC_PCIE_CLKREF_EN>, + <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_PCIE1_PHY_RCHNG_CLK>, <&gcc GCC_PCIE_1_PIPE_CLK>; clock-names = "aux",
Greg Kroah-Hartman
maintainerPATCH 169/201 arm64: dts: qcom: lemans: Correct QUP interrupt numbers
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Viken Dadhaniya <[email protected]>
commit c5b22c88cc09b180e3a23010b29f4d02ec117a44 upstream.
Fix GIC_SPI interrupt numbers for QUPv3 SE6 nodes on Lemans SoC. Using incorrect interrupt lines can prevent IRQs from triggering and break I2C, SPI, and UART operation.
--- arch/arm64/boot/dts/qcom/lemans.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
arch/arm64/boot/dts/qcom/lemans.dtsi +4 -4
@@ -1512,7 +1512,7 @@ reg = <0x0 0x898000 0x0 0x4000>; #address-cells = <1>; #size-cells = <0>; - interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; clock-names = "se"; pinctrl-0 = <&qup_i2c20_default>;
@@ -1539,7 +1539,7 @@ reg = <0x0 0x898000 0x0 0x4000>; #address-cells = <1>; #size-cells = <0>; - interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; clock-names = "se"; pinctrl-0 = <&qup_spi20_default>;
@@ -1564,7 +1564,7 @@ uart20: serial@898000 { compatible = "qcom,geni-uart"; reg = <0x0 0x00898000 0x0 0x4000>; - interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; clock-names = "se"; pinctrl-0 = <&qup_uart20_default>;
@@ -2510,7 +2510,7 @@ reg = <0x0 0xa98000 0x0 0x4000>; #address-cells = <1>; #size-cells = <0>; - interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; clock-names = "se"; pinctrl-0 = <&qup_i2c13_default>;
Greg Kroah-Hartman
maintainerPATCH 170/201 arm64: dts: ti: k3-am62a7-sk: Fix pin name in comment from M19 to N22
In reply to Greg Kroah-Hartman7.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Siddharth Vadapalli <[email protected]>
commit 6ee0792d83d5c690205c350825a4c30746c0e0a2 upstream.
The pin for GPMC0_CLK.GPIO0_31 at address 0x000F407C is N22 and not M19. Hence, fix the pin name in the comment to avoid confusion.
--- arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/ti/k3-am62a7-sk.dts +1 -1
@@ -398,7 +398,7 @@ vddshv_sdio_pins_default: vddshv-sdio-default-pins { pinctrl-single,pins = < - AM62AX_IOPAD(0x07c, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO0_31 */ + AM62AX_IOPAD(0x07c, PIN_OUTPUT, 7) /* (N22) GPMC0_CLK.GPIO0_31 */ >; };