Skip to contentSkip to conversation

cxl/pci: Fix the incorrect check of pci_config_read/write*() returns

PATCH Applied Dave Jiang 2 participants 5 messages Jun 4 CXL

lore
Share & tools
lore

Dave Jiang

author maintainer
#0 lore raw

v2 cover cxl/pci: Fix the incorrect check of pci_config_read/write*() returns

v2:
- Fixed up additional bits (Alison)
- Fix up fixes tag (Alison)

The patches are inspired by comments from Richard Cheng WRT pci config accessors return PCIBIOS errors that are positive integers rather than negative errnos. I went and audited the cxl PCI code and found a few locations that need to be fixed. There are other locations that may trigger issues, but at this point we'll fix them as they happen.

Dave Jiang (2):
cxl/pci: Fix the incorrect check of pci_read_config_word() return cxl/pci: Convert PCIBIOS errors to errno on DVSEC config accesses

 drivers/cxl/core/pci.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

base-commit: e43ffb69e0438cddd72aaa30898b4dc446f664f8

Signature · 1 line
2.54.0
author maintainer
#1 lore raw

PATCH v2 1/2 cxl/pci: Fix the incorrect check of pci_read_config_word() return

pci_read_config_word() returns PCIBIOS_* status on error which are positive values. The check should be for non-zero values to indicate error. Fix cxl_set_mem_enable() to check for non-zero return value instead of negative value.

While fixing this, also convert the error to negative errno value when returning on error path.

Fixes 34e37b4c432c ("cxl/port: Enable HDM Capability after validating DVSEC Ranges")
Assisted-by Claude:claude-opus-4-8
---
 drivers/cxl/core/pci.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/cxl/core/pci.c +4 -4
index d1f487b3d809..43885c59a7f2 100644
@@ -187,8 +187,8 @@ static int cxl_set_mem_enable(struct cxl_dev_state *cxlds, u16 val)
 	int rc;
 
 	rc = pci_read_config_word(pdev, d + PCI_DVSEC_CXL_CTRL, &ctrl);
-	if (rc < 0)
-		return rc;
+	if (rc)
+		return pcibios_err_to_errno(rc);
 
 	if ((ctrl & PCI_DVSEC_CXL_MEM_ENABLE) == val)
 		return 1;
@@ -196,8 +196,8 @@ static int cxl_set_mem_enable(struct cxl_dev_state *cxlds, u16 val)
 	ctrl |= val;
 
 	rc = pci_write_config_word(pdev, d + PCI_DVSEC_CXL_CTRL, ctrl);
-	if (rc < 0)
-		return rc;
+	if (rc)
+		return pcibios_err_to_errno(rc);
 
 	return 0;
 }
Signature · 1 line
2.54.0
author maintainer
#2 lore raw

PATCH v2 2/2 cxl/pci: Convert PCIBIOS errors to errno on DVSEC config accesses

In reply to Dave Jiang

PCI config space accessors return positive PCIBIOS_* status codes on failure that are positive integers. Several DVSEC accesses in the CXL core propagated these raw values to callers that test for failure against less than 0. Thus silently misinterpret the return value as success.

Convert the postive error values to negative errno values so the checks are correct on error paths.

While the chances of a config access failure are low, fix for correctness and to avoid confusion in the future when more DVSEC accesses are added.

Fixes 14d788740774 ("cxl/mem: Consolidate CXL DVSEC Range enumeration in the core")
Fixes ce17ad0d5498 ("cxl: Wait Memory_Info_Valid before access memory related info")
Assisted-by Claude:claude-opus-4-8

---
v2:
- Fixup cxl_dvsec_mem_range_active() and cxl_awai_media_ready(). (Alison)
- Fix fixes tag (Alison)

---
 drivers/cxl/core/pci.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)
drivers/cxl/core/pci.c +9 -9
index 43885c59a7f2..e4338fd7e01b 100644
@@ -89,7 +89,7 @@ static int cxl_dvsec_mem_range_valid(struct cxl_dev_state *cxlds, int id)
 					   d + PCI_DVSEC_CXL_RANGE_SIZE_LOW(id),
 					   &temp);
 		if (rc)
-			return rc;
+			return pcibios_err_to_errno(rc);
 
 		valid = FIELD_GET(PCI_DVSEC_CXL_MEM_INFO_VALID, temp);
 		if (valid)
@@ -123,7 +123,7 @@ static int cxl_dvsec_mem_range_active(struct cxl_dev_state *cxlds, int id)
 		rc = pci_read_config_dword(
 			pdev, d + PCI_DVSEC_CXL_RANGE_SIZE_LOW(id), &temp);
 		if (rc)
-			return rc;
+			return pcibios_err_to_errno(rc);
 
 		active = FIELD_GET(PCI_DVSEC_CXL_MEM_ACTIVE, temp);
 		if (active)
@@ -156,7 +156,7 @@ int cxl_await_media_ready(struct cxl_dev_state *cxlds)
 	rc = pci_read_config_word(pdev,
 				  d + PCI_DVSEC_CXL_CAP, &cap);
 	if (rc)
-		return rc;
+		return pcibios_err_to_errno(rc);
 
 	hdm_count = FIELD_GET(PCI_DVSEC_CXL_HDM_COUNT, cap);
 	for (i = 0; i < hdm_count; i++) {
@@ -275,7 +275,7 @@ int cxl_dvsec_rr_decode(struct cxl_dev_state *cxlds,
 
 	rc = pci_read_config_word(pdev, d + PCI_DVSEC_CXL_CAP, &cap);
 	if (rc)
-		return rc;
+		return pcibios_err_to_errno(rc);
 
 	if (!(cap & PCI_DVSEC_CXL_MEM_CAPABLE)) {
 		dev_dbg(dev, "Not MEM Capable\n");
@@ -299,7 +299,7 @@ int cxl_dvsec_rr_decode(struct cxl_dev_state *cxlds,
 	 */
 	rc = pci_read_config_word(pdev, d + PCI_DVSEC_CXL_CTRL, &ctrl);
 	if (rc)
-		return rc;
+		return pcibios_err_to_errno(rc);
 
 	info->mem_enabled = FIELD_GET(PCI_DVSEC_CXL_MEM_ENABLE, ctrl);
 	if (!info->mem_enabled)
@@ -316,14 +316,14 @@ int cxl_dvsec_rr_decode(struct cxl_dev_state *cxlds,
 		rc = pci_read_config_dword(
 			pdev, d + PCI_DVSEC_CXL_RANGE_SIZE_HIGH(i), &temp);
 		if (rc)
-			return rc;
+			return pcibios_err_to_errno(rc);
 
 		size = (u64)temp << 32;
 
 		rc = pci_read_config_dword(
 			pdev, d + PCI_DVSEC_CXL_RANGE_SIZE_LOW(i), &temp);
 		if (rc)
-			return rc;
+			return pcibios_err_to_errno(rc);
 
 		size |= temp & PCI_DVSEC_CXL_MEM_SIZE_LOW;
 		if (!size) {
@@ -333,14 +333,14 @@ int cxl_dvsec_rr_decode(struct cxl_dev_state *cxlds,
 		rc = pci_read_config_dword(
 			pdev, d + PCI_DVSEC_CXL_RANGE_BASE_HIGH(i), &temp);
 		if (rc)
-			return rc;
+			return pcibios_err_to_errno(rc);
 
 		base = (u64)temp << 32;
 
 		rc = pci_read_config_dword(
 			pdev, d + PCI_DVSEC_CXL_RANGE_BASE_LOW(i), &temp);
 		if (rc)
-			return rc;
+			return pcibios_err_to_errno(rc);
 
 		base |= temp & PCI_DVSEC_CXL_MEM_BASE_LOW;
 
Signature · 1 line
2.54.0
maintainer Reviewed-by on v2 2/2
#3 lore raw

Re: [PATCH v2 2/2] cxl/pci: Convert PCIBIOS errors to errno on DVSEC config accesses

Quoted 6 lines · Dave Jiang

PCI config space accessors return positive PCIBIOS_* status codes on failure that are positive integers. Several DVSEC accesses in the CXL core propagated these raw values to callers that test for failure against less than 0. Thus silently misinterpret the return value as success.

Convert the postive error values to negative errno values so the checks

positive

Quoted 5 lines

are correct on error paths.

While the chances of a config access failure are low, fix for correctness and to avoid confusion in the future when more DVSEC accesses are added.

author maintainer Applied
#4 lore raw
In reply to Dave Jiang
Quoted 15 lines · Dave Jiang

v2:
- Fixed up additional bits (Alison)
- Fix up fixes tag (Alison)

The patches are inspired by comments from Richard Cheng WRT pci config accessors return PCIBIOS errors that are positive integers rather than negative errnos. I went and audited the cxl PCI code and found a few locations that need to be fixed. There are other locations that may trigger issues, but at this point we'll fix them as they happen.

Dave Jiang (2):
cxl/pci: Fix the incorrect check of pci_read_config_word() return cxl/pci: Convert PCIBIOS errors to errno on DVSEC config accesses

Quoted 5 lines
 drivers/cxl/core/pci.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

base-commit: e43ffb69e0438cddd72aaa30898b4dc446f664f8

merged to cxl/next

66782cfa0085
26aa60e02762