Skip to contentSkip to conversation

doc: thead: lpi4a: detail how to enable fastboot

PATCH In review Michael Opdenacker 2 participants 2 messages Jul 15 – Jul 16

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 doc: thead: lpi4a: detail how to enable fastboot

Add that the "BOOT" button must be used
to switch the board to fastboot mode.

---
 doc/board/thead/lpi4a.rst | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
doc/board/thead/lpi4a.rst +4 -2
index acd7ac2698d..3920efcd710 100644
@@ -91,8 +91,10 @@ OpenSBI firmware and proper U-Boot.
 Booting
 ~~~~~~~
 
-u-boot-with-spl.bin should be loaded to SRAM through fastboot. Connect
-the board to computer with Type-C cable and run
+u-boot-with-spl.bin should be loaded to SRAM through fastboot.
+
+To put the board in fastboot mode, press and hold the ``BOOT`` button,
+connect the board to the computer with a Type-C cable, release ``BOOT`` and run:
 
 .. code-block:: bash
 

---
base-commit: 8dbe57ba648648c4897717cebbc4505a8e0a8c23
change-id: 20260715-improve-lpi4a-doc-feed8191d37c

Best regards,

Signature · 1 line
Michael Opdenacker <[email protected]>
Reviewed-by on v1 1/1
#1 lore raw
Quoted 30 lines · Michael Opdenacker

Add that the "BOOT" button must be used
to switch the board to fastboot mode.

---
 doc/board/thead/lpi4a.rst | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
doc/board/thead/lpi4a.rst +4 -3
index acd7ac2698d..3920efcd710 100644
@@ -91,8 +91,10 @@ OpenSBI firmware and proper U-Boot.
 Booting
 ~~~~~~~
 
-u-boot-with-spl.bin should be loaded to SRAM through fastboot. Connect
-the board to computer with Type-C cable and run
+u-boot-with-spl.bin should be loaded to SRAM through fastboot.
+
+To put the board in fastboot mode, press and hold the ``BOOT`` button,
+connect the board to the computer with a Type-C cable, release ``BOOT`` and run:
 
 .. code-block:: bash
 
 
---

base-commit: 8dbe57ba648648c4897717cebbc4505a8e0a8c23
change-id: 20260715-improve-lpi4a-doc-feed8191d37c

Quoted 4 lines

Best regards,

Signature · 1 line
Michael Opdenacker <[email protected]>

Thanks, this is indeed more clear.

Regards,
Yao Zi