ASoC: mediatek: mt8183: Fix clock error handling
Subsystems (3)
v2 cover ASoC: mediatek: mt8183: Fix clock error handling
From: bui duc phuc <[email protected]>
Hi all,
This series fixes and cleans up clock error handling in the MT8183 ASoC driver.
Compile tested only.
Changes in v2:
- Remove the redundant error log for apll1_mux_setting error handling.
- Add Fixes tags.
- Add a cover letter.
Best regards,
Phuc
bui duc phuc (4):
ASoC: mediatek: mt8183: Fix wrong clock cleanup on clk_set_parent()
failure
ASoC: mediatek: mt8183: Fix APLL enable error handling
ASoC: mediatek: mt8183: Use dev_err_probe() for error handling
ASoC: mediatek: mt8183: Drop redundant probe error messages
sound/soc/mediatek/mt8183/mt8183-afe-clk.c | 25 +++++++++++++--------- sound/soc/mediatek/mt8183/mt8183-afe-pcm.c | 8 ++----- 2 files changed, 17 insertions(+), 16 deletions(-)
Signature · 1 line
2.43.0
PATCH v2 1/4 ASoC: mediatek: mt8183: Fix wrong clock cleanup on clk_set_parent() failure
From: bui duc phuc <[email protected]>
In mt8183_afe_enable_clock(), when clk_set_parent() fails, the current error path incorrectly cleans up the previously enabled clock instead of the clock used by clk_set_parent().
Fix the error path to clean up the correct clock when clk_set_parent() fails.
--- sound/soc/mediatek/mt8183/mt8183-afe-clk.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
sound/soc/mediatek/mt8183/mt8183-afe-clk.c +2 -2
@@ -137,7 +137,7 @@ int mt8183_afe_enable_clock(struct mtk_base_afe *afe)dev_err (afe->dev,"%s(), clk_set_parent %s-%s fail %d\n" , __func__, aud_clks[CLK_MUX_AUDIO ], aud_clks[CLK_CLK26M ], ret); - goto CLK_MUX_AUDIO_ERR; + goto CLK_MUX_AUDIO_INTBUS_ERR; } ret =clk_prepare_enable (afe_priv->clk[CLK_MUX_AUDIOINTBUS ]);
@@ -153,7 +153,7 @@ int mt8183_afe_enable_clock(struct mtk_base_afe *afe)dev_err (afe->dev,"%s(), clk_set_parent %s-%s fail %d\n" , __func__, aud_clks[CLK_MUX_AUDIOINTBUS ], aud_clks[CLK_TOP_SYSPLL_D2_D4 ], ret); - goto CLK_MUX_AUDIO_INTBUS_ERR; + goto CLK_AFE_ERR; } ret =clk_prepare_enable (afe_priv->clk[CLK_AFE ]);
Signature · 1 line
2.43.0
PATCH v2 2/4 ASoC: mediatek: mt8183: Fix APLL enable error handling
In reply to [email protected]From: bui duc phuc <[email protected]>
Currently, the mt8183_apll*_enable() functions call mux_setting(afe, true) but do not check its return value to handle failures.
In addition, the cleanup paths of mt8183_apll*_enable() do not call mux_setting(afe, false) when the enable operation fails, while the mt8183_apll*_disable() functions do.
Add error handling for apll*_mux_setting() and call mux_setting(afe, false) in the cleanup paths when mt8183_apll*_enable() fails.
--- sound/soc/mediatek/mt8183/mt8183-afe-clk.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)
sound/soc/mediatek/mt8183/mt8183-afe-clk.c +10 -2
@@ -382,7 +382,9 @@ int mt8183_apll1_enable(struct mtk_base_afe *afe)int ret;/* setting for APLL */ -apll1_mux_setting (afe, true); + ret =apll1_mux_setting (afe, true); +if (ret) + goto ERR_APLL1_MUX_SETTING; ret =clk_prepare_enable (afe_priv->clk[CLK_APLL22M ]);if (ret) {
@@ -411,6 +413,8 @@ int mt8183_apll1_enable(struct mtk_base_afe *afe) ERR_CLK_APLL1_TUNER:clk_disable_unprepare (afe_priv->clk[CLK_APLL22M ]); ERR_CLK_APLL22M: +apll1_mux_setting (afe, false); +ERR_APLL1_MUX_SETTING:return ret; }
@@ -436,7 +440,9 @@ int mt8183_apll2_enable(struct mtk_base_afe *afe)int ret;/* setting for APLL */ -apll2_mux_setting (afe, true); + ret =apll2_mux_setting (afe, true); +if (ret) + goto ERR_APLL2_MUX_SETTING; ret =clk_prepare_enable (afe_priv->clk[CLK_APLL24M ]);if (ret) {
@@ -465,6 +471,8 @@ int mt8183_apll2_enable(struct mtk_base_afe *afe) ERR_CLK_APLL2_TUNER:clk_disable_unprepare (afe_priv->clk[CLK_APLL24M ]); ERR_CLK_APLL24M: +apll2_mux_setting (afe, false); +ERR_APLL2_MUX_SETTING:return ret; }
Signature · 1 line
2.43.0
PATCH v2 3/4 ASoC: mediatek: mt8183: Use dev_err_probe() for error handling
In reply to [email protected]From: bui duc phuc <[email protected]>
Replace dev_err() with dev_err_probe() to prevent log spam when probe returns -EPROBE_DEFER.
--- sound/soc/mediatek/mt8183/mt8183-afe-clk.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-)
sound/soc/mediatek/mt8183/mt8183-afe-clk.c +3 -6
@@ -101,12 +101,9 @@ int mt8183_init_clock(struct mtk_base_afe *afe)for (i =0 ; i <CLK_NUM ; i++) { afe_priv->clk[i] =devm_clk_get (afe->dev, aud_clks[i]); -if (IS_ERR (afe_priv->clk[i])) { -dev_err (afe->dev,"%s(), devm_clk_get %s fail, ret %ld\n" , - __func__, aud_clks[i], -PTR_ERR (afe_priv->clk[i])); -return PTR_ERR (afe_priv->clk[i]); - } +if (IS_ERR (afe_priv->clk[i])) +return dev_err_probe (afe->dev,PTR_ERR (afe_priv->clk[i]), +"failed to get clock %s\n" , aud_clks[i]); }return 0 ;
Signature · 1 line
2.43.0
PATCH v2 4/4 ASoC: mediatek: mt8183: Drop redundant probe error messages
In reply to [email protected]From: bui duc phuc <[email protected]>
The errors handled here are already reported by the called functions, either directly or deeper in the call chain. Therefore, the additional dev_err() calls are redundant and can be removed.
--- sound/soc/mediatek/mt8183/mt8183-afe-pcm.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-)
sound/soc/mediatek/mt8183/mt8183-afe-pcm.c +2 -6
@@ -809,10 +809,8 @@ static int mt8183_afe_pcm_dev_probe(struct platform_device *pdev)/* initial audio related clock */ ret =mt8183_init_clock (afe); -if (ret) { -dev_err (dev,"init clock error\n" ); +if (ret)return ret; - }pm_runtime_enable (dev);
@@ -903,10 +901,8 @@ static int mt8183_afe_pcm_dev_probe(struct platform_device *pdev) ret =devm_request_irq (dev, irq_id, mt8183_afe_irq_handler,IRQF_TRIGGER_NONE ,"asys-isr" , (void *)afe); -if (ret) { -dev_err (dev,"could not request_irq for asys-isr\n" ); +if (ret) goto err_pm_disable; - }/* init sub_dais */ INIT_LIST_HEAD (&afe->sub_dais);
Signature · 1 line
2.43.0
Re: [PATCH v2 2/4] ASoC: mediatek: mt8183: Fix APLL enable error handling
In reply to [email protected]Quoted 11 lines · On 8/21/2026 2:29 PM, [email protected] wrote:
From: bui duc phuc <[email protected]>
Currently, the mt8183_apll*_enable() functions call
mux_setting(afe, true)but do not check its return value to handle failures.In addition, the cleanup paths of mt8183_apll*_enable() do not call
mux_setting(afe, false)when the enable operation fails, while the mt8183_apll*_disable() functions do.Add error handling for apll*_mux_setting() and call
mux_setting(afe, false)in the cleanup paths when mt8183_apll*_enable() fails.
I have mixed feelings about appl*_mux_setting(). Take a look at its disable-path: if clk_set_parent() fails the follow up clk_disable_unprepare() is skipped possibly leaving one of the clks hanging. I'd expect error paths of callers (of said mux_setting() function) to ensure all the clks are disabled and unprepared unconditionally.
Quoted 11 lines
Fixes a94aec035a12 ("ASoC: mediatek: mt8183: add platform driver")Signed-off-by bui duc phuc <[email protected]>--- sound/soc/mediatek/mt8183/mt8183-afe-clk.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)sound/soc/mediatek/mt8183/mt8183-afe-clk.c +0
-0
sound/soc/mediatek/mt8183/mt8183-afe-clk.c int mt8183_apll1_enable(struct mtk_base_afe *afe) · line 387
Quoted 7 lines
sound/soc/mediatek/mt8183/mt8183-afe-clk.c +3
-1@@ -382,7 +382,9 @@ int mt8183_apll1_enable(struct mtk_base_afe *afe)int ret;/* setting for APLL */ -apll1_mux_setting (afe, true); + ret =apll1_mux_setting (afe, true); +if (ret) + goto ERR_APLL1_MUX_SETTING;
Why goto? The check is valid but the label in my opinion is unnecessary.
sound/soc/mediatek/mt8183/mt8183-afe-clk.c int mt8183_apll1_enable(struct mtk_base_afe *afe) · line 417
Quoted 9 lines
sound/soc/mediatek/mt8183/mt8183-afe-clk.c +2
-0ret =clk_prepare_enable (afe_priv->clk[CLK_APLL22M ]);if (ret) {@@ -411,6 +413,8 @@ int mt8183_apll1_enable(struct mtk_base_afe *afe) ERR_CLK_APLL1_TUNER:clk_disable_unprepare (afe_priv->clk[CLK_APLL22M ]); ERR_CLK_APLL22M: +apll1_mux_setting (afe, false); +ERR_APLL1_MUX_SETTING:
While UPPER case for goto-labels is not part of the coding style I see why you did it - to be cohesive with the rest of the file.
Re: [PATCH v2 3/4] ASoC: mediatek: mt8183: Use dev_err_probe() for error handling
In reply to [email protected]Quoted 20 lines · On 8/21/2026 2:29 PM, [email protected] wrote:
From: bui duc phuc <[email protected]>
Replace
dev_err()withdev_err_probe()to prevent log spam when probe returns -EPROBE_DEFER.Signed-off-by bui duc phuc <[email protected]>--- sound/soc/mediatek/mt8183/mt8183-afe-clk.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-)sound/soc/mediatek/mt8183/mt8183-afe-clk.c +0
-2@@ -101,12 +101,9 @@ int mt8183_init_clock(struct mtk_base_afe *afe)for (i =0 ; i <CLK_NUM ; i++) { afe_priv->clk[i] =devm_clk_get (afe->dev, aud_clks[i]); -if (IS_ERR (afe_priv->clk[i])) { - dev_err(afe->dev, "%s(), devm_clk_get %s fail, ret %ld\n",
sound/soc/mediatek/mt8183/mt8183-afe-clk.c int mt8183_init_clock(struct mtk_base_afe *afe) · line 109
Quoted 10 lines
sound/soc/mediatek/mt8183/mt8183-afe-clk.c +3
-4- __func__, aud_clks[i], - PTR_ERR(afe_priv->clk[i])); -return PTR_ERR (afe_priv->clk[i]); - } +if (IS_ERR (afe_priv->clk[i])) +return dev_err_probe (afe->dev,PTR_ERR (afe_priv->clk[i]), +"failed to get clock %s\n" , aud_clks[i]); }return 0 ;
Re: [PATCH v2 4/4] ASoC: mediatek: mt8183: Drop redundant probe error messages
In reply to [email protected]Quoted 7 lines · On 8/21/2026 2:29 PM, [email protected] wrote:
From: bui duc phuc <[email protected]>
The errors handled here are already reported by the called functions, either directly or deeper in the call chain. Therefore, the additional
dev_err()calls are redundant and can be removed.Signed-off-by bui duc phuc <[email protected]>
Re: [PATCH v2 1/4] ASoC: mediatek: mt8183: Fix wrong clock cleanup on clk_set_parent() failure
In reply to [email protected]Quoted 11 lines · On 8/21/2026 2:29 PM, [email protected] wrote:
From: bui duc phuc <[email protected]>
In
mt8183_afe_enable_clock(), whenclk_set_parent()fails, the current error path incorrectly cleans up the previously enabled clock instead of the clock used byclk_set_parent().Fix the error path to clean up the correct clock when
clk_set_parent()fails.Fixes a94aec035a12 ("ASoC: mediatek: mt8183: add platform driver")Signed-off-by bui duc phuc <[email protected]>
Very good finding!
Re: [PATCH v2 2/4] ASoC: mediatek: mt8183: Fix APLL enable error handling
In reply to Cezary RojewskiHi Cezary,
Thank you for your review.
Quoted 7 lines
I have mixed feelings about appl*_mux_setting(). Take a look at its
disable-path: ifclk_set_parent()fails the follow upclk_disable_unprepare()is skipped possibly leaving one of the clks hanging. I'd expect error paths of callers (of saidmux_setting()function) to ensure all the clks are disabled and unprepared unconditionally.
Perhaps the primary purpose of the appl*_mux_setting() functions is to configure the mux, as their names suggest, which may explain why the disable path is currently structured this way. However, I think your point is valid.
As far as I understand, calling clk_disable_unprepare() before clk_set_parent() should not cause any issues. Therefore, we could move both clk_disable_unprepare() calls before changing the parent in the disable path:
------------------------------------clk_disable_unprepare(afe_priv->clk[CLK_TOP_MUX_AUD_ENG2]); clk_disable_unprepare(afe_priv->clk[CLK_TOP_MUX_AUD_2]); ret = clk_set_parent(afe_priv->clk[CLK_TOP_MUX_AUD_ENG2],
afe_priv->clk[CLK_CLK26M]);
if (ret) {
...
goto EXIT;
}
ret = clk_set_parent(afe_priv->clk[CLK_TOP_MUX_AUD_2],
afe_priv->clk[CLK_CLK26M]);
if (ret) {
...
goto EXIT;
}
-------------------------------------
To be honest, after looking at the code for other MediaTek SoCs, I found quite a few logic issues and inconsistent clock handling. This, along with the git log history,
makes me wonder whether these code paths were ever properly tested on real hardware.
Therefore, I have stopped at mt8186 for now.
Quoted 8 lines
sound/soc/mediatek/mt8183/mt8183-afe-clk.c int mt8183_apll1_enable(struct mtk_base_afe *afe) · line 387
Quoted 5 lines
/* setting for APLL */sound/soc/mediatek/mt8183/mt8183-afe-clk.c +3
-1-apll1_mux_setting (afe, true); + ret =apll1_mux_setting (afe, true); +if (ret) + goto ERR_APLL1_MUX_SETTING;Why goto? The check is valid but the label in my opinion is unnecessary.
The function could return directly here, but I used goto to keep it consistent with
the existing error handling in this function.
Quoted 5 lines
sound/soc/mediatek/mt8183/mt8183-afe-clk.c int mt8183_apll1_enable(struct mtk_base_afe *afe) · line 417
Quoted 2 lines
sound/soc/mediatek/mt8183/mt8183-afe-clk.c +2
-0+apll1_mux_setting (afe, false); +ERR_APLL1_MUX_SETTING:While UPPER case for goto-labels is not part of the coding style I see why you did it - to be cohesive with the rest of the file.
Yes, that's right. However, I noticed that the mt8186 code uses lowercase names for goto labels,
so the style is not consistent across the file.
https://elixir.bootlin.com/linux/v7.2/source/sound/soc/mediatek/mt8186/mt8186-afe-clk.c#L303
Best regards,
Phuc
Mark Brown
maintainerRe: [PATCH v2 2/4] ASoC: mediatek: mt8183: Fix APLL enable error handling
Quoted 6 lines · Bui Duc Phuc
To be honest, after looking at the code for other MediaTek SoCs, I found quite a few logic issues and inconsistent clock handling. This, along with the git log history,
makes me wonder whether these code paths were ever properly tested on real hardware.
Therefore, I have stopped at mt8186 for now.
There's a lot of code there with shaky error handling; probably the default case works but things blow up relatively easily on error.
Re: [PATCH v2 2/4] ASoC: mediatek: mt8183: Fix APLL enable error handling
Hi Mark, Cezary.
Thank you for your feedback.
Quoted 10 lines
Quoted 7 lines
To be honest, after looking at the code for other MediaTek SoCs, I found quite a few logic issues and inconsistent clock handling. This, along with the git log history,
makes me wonder whether these code paths were ever properly tested on real hardware.
Therefore, I have stopped at mt8186 for now.There's a lot of code there with shaky error handling; probably the default case works but things blow up relatively easily on error.
If you think these code paths are generally functional on real hardware and the main issue is the shaky error handling,
I’m happy to continue reviewing the remaining SoCs.
I’ll also apply Cezary’s review comments regarding the clock handling in the mux disable path and returning directly from apllx_mux_setting() instead of using a goto label, and incorporate these changes into the next patches.
There are also quite a few uppercase goto labels. I think this cleanup can be addressed separately later.
Best regards,
Phuc