Problem of porting uClinux
I am trying to port uClinux2.4 to my board [S3C44B0],but got a problem whitch I have no idea.
imagerom.bin was downloaded to 0xc100000 [RAM] and kenel can be run successfully by using command go 0xc100000.
Then I use mkimage -A arm -O linux -C gzip -a 0xc008000 -e 0xc008040 -d image.rom.gz uImage
kermit showed : (when I reset board after downloaded uImage to 0x20000 )
...
...
Verifying Checksum .....ok
Uncompressing Kenel Image ...Ok
##Loading Ramdisk Image at 000f0000....
Bad Magic Number
Quoted 1 line
Quoted 1 line
Hi Zhao,
Quoted 8 lines
kermit showed : (when I reset board after downloaded uImage to
0x20000)
...
...
Verifying Checksum .....ok
Uncompressing Kenel Image ...Ok
##Loading Ramdisk Image at000f0000....
Bad Magic NumberQuoted 1 line
Quoted 1 line
Is the root filesystem (ramdisk) in flash? The print
Quoted 2 lines
##Loading Ramdisk Image at
000f0000....
Bad Magic Number
denotes that loading the filesystem image from flash failed.
Regards,
Jayakrishnan