Input: xpad - add PXN V900 support

Hi everybody,

I recently sent this patch to the linux-input list where it was ignored, so now I'm sending it again to every email address that get_maintainer.pl gives me in the hope that it'll somehow get merged.
This is a trivial patch that enables support for the PXN V900 steering wheel in the xpad driver. It's just a matter of adding the relevant USB vendorId/ productId to the list of supported IDs. I've tried it and it works.

All the best,
Matthias

From 9b0af40bc3c064be1c7c5ba36d7fb4b8d6535fc7 Mon Sep 17 00:00:00 2001
From: Matthias Berndt <[email protected]>
Date: Mon, 25 Sep 2023 17:54:13 +0200
Subject: [PATCH] Input: xpad - add PXN V900 support

Add VID and PID to the xpad_device table to allow driver to use the PXN V900 steering wheel, which is XTYPE_XBOX360 compatible in xinput mode.

---
 drivers/input/joystick/xpad.c | 2 ++
 1 file changed, 2 insertions(+)

index ede380551e55..478bf657efc2 100644
@@ -272,6 +272,7 @@ static const struct xpad_device {
 	{ 0x1038, 0x1430, "SteelSeries Stratus Duo", 0, XTYPE_XBOX360 },
 	{ 0x1038, 0x1431, "SteelSeries Stratus Duo", 0, XTYPE_XBOX360 },
 	{ 0x11c9, 0x55f0, "Nacon GC-100XF", 0, XTYPE_XBOX360 },
+	{ 0x11ff, 0x0511, "PXN V900", 0, XTYPE_XBOX360 },
 	{ 0x1209, 0x2882, "Ardwiino Controller", 0, XTYPE_XBOX360 },
 	{ 0x12ab, 0x0004, "Honey Bee Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x12ab, 0x0301, "PDP AFTERGLOW AX.1", 0, XTYPE_XBOX360 },

@@ -503,6 +504,7 @@ static const struct usb_device_id xpad_table[] = {
 	XPAD_XBOX360_VENDOR(0x3285),		/* Nacon GC-100 */
 	XPAD_XBOX360_VENDOR(0x3537),		/* GameSir Controllers */
 	XPAD_XBOXONE_VENDOR(0x3537),		/* GameSir Controllers */
+	XPAD_XBOX360_VENDOR(0x11ff),		/* PXN V900 */
 	{ }
 };
 

--
2.41.0

Hi Matthias,

I need your "Signed-off-by: ..." in order to merge this patch. Please resend following guidelines in Documentation/process/submitting-patches.rst

Thanks.

Dmitry