Skip to contentSkip to conversation

the custom borad supportting nandflash

U-Boot-Users willow (sent by Nabble.com) 2 participants 4 messages Jan 11, 2006 – Jan 12, 2006

lore
Share & tools
lore
#0 lore raw

Hi all,
Who could tell me any custom board' name which image of the u-boot.bin is saved in the nandflash in a "u-boot-1.1.4.tar.bz2" packet.
I am portting the u-boot to a arm926jes cutom borad booting from a nandflash and had successfully boot from a norflash. But what do I need to do for booting from nand? Perhaps I can find some tips from the exist custom boards in the u-boot packet.
Please help.

Best regards,
Willow

--
View this message in context: http://www.nabble.com/the-custom-borad-supportting-nandflash-t896328.html#a2323157
Sent from the Uboot - Users forum at Nabble.com.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20060111/4c709f03/attachment.htm

#1 lore raw
Quoted 2 lines · In message <[email protected]> you wrote:

Who could tell me any custom board' name which image of the u-boot.bin is saved in the nandflash in a "u-boot-1.1.4.tar.bz2" packet.

U-Boot does not support such a mode of operation.

Quoted 1 line

I am portting the u-boot to a arm926jes cutom borad booting from a nandflash and had successfully boot from a norflash. But what do I need to do for booting from nand? Perhaps I can find some tips from the exist custom boards in the u-boot packet

I never heard of anybody crazy enough to wrap a boot laoder image in a comporessed _tarball_.

Quoted 3 lines

------=_Part_2192_32889152.1136998266428
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit

Please never post HTML on this list.

And why the h*** did you post the very same message twice within less than a minute? Don't do this!

Best regards,

Wolfgang Denk

Signature · 5 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
It is impractical for  the  standard  to  attempt  to  constrain  the
behavior  of code that does not obey the constraints of the standard.
                                                          - Doug Gwyn
#2 lore raw

Hi, denk,
I am sorry about posting twice the same text, it is a mistake.
I do not think I describe my problem in top text. And I just want boot my arm926ejs from a nandflash, not from a norflash(there is not a norflash in my custom board in the future). so the u-boot.bin is stored in a nandflash.
So Which things must I complete in the U-boot or just say Which files must I add or modify in the U-boot?
My english is bad or could you kindly talk with me about this?my Skepe is : liugeng-ws at 163.com
Thanks.

Best Wishs,
Wilow

--
View this message in context: http://www.nabble.com/the-custom-borad-supportting-nandflash-t896328.html#a2332651
Sent from the Uboot - Users forum at Nabble.com.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20060111/8a89ba0f/attachment.htm

#3 lore raw
Quoted 3 lines · In message <[email protected]> you wrote:

I do not think I describe my problem in top text. And I just want boot my arm926ejs from a nandflash, not from a norflash(there is not a norflash in my custom board in the future). so the u-boot.bin is stored in a nandflash.
So Which things must I complete in the U-boot or just say Which files must I add or modify in the U-boot?

Compare what has been done for other processors (at91rm9200dk); search for CONFIG_SKIP_LOWLEVEL_INIT

Best regards,

Wolfgang Denk

Signature · 4 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Only in our dreams we are free.  The rest of the time we need  wages.
                                    - Terry Pratchett, _Wyrd Sisters_