the custom borad supportting nandflash
Hi all,
Who could tell me any custom board' name which image of the u-boot.bin is saved in the nandflash in a "u-boot-1.1.4.tar.bz2" packet.
I am portting the u-boot to a arm926jes cutom borad booting from a nandflash and had successfully boot from a norflash. But what do I need to do for booting from nand? Perhaps I can find some tips from the exist custom boards in the u-boot packet.
Please help.
Best regards,
Willow
--
View this message in context: http://www.nabble.com/the-custom-borad-supportting-nandflash-t896328.html#a2323157
Sent from the Uboot - Users forum at Nabble.com.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20060111/4c709f03/attachment.htm
Quoted 2 lines · In message <[email protected]> you wrote:
Who could tell me any custom board' name which image of the u-boot.bin is saved in the nandflash in a "u-boot-1.1.4.tar.bz2" packet.
U-Boot does not support such a mode of operation.
Quoted 1 line
I am portting the u-boot to a arm926jes cutom borad booting from a nandflash and had successfully boot from a norflash. But what do I need to do for booting from nand? Perhaps I can find some tips from the exist custom boards in the u-boot packet
I never heard of anybody crazy enough to wrap a boot laoder image in a comporessed _tarball_.
Quoted 3 lines
------=_Part_2192_32889152.1136998266428
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit
Please never post HTML on this list.
And why the h*** did you post the very same message twice within less than a minute? Don't do this!
Best regards,
Wolfgang Denk
Signature · 5 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
It is impractical for the standard to attempt to constrain the
behavior of code that does not obey the constraints of the standard.
- Doug GwynHi, denk,
I am sorry about posting twice the same text, it is a mistake.
I do not think I describe my problem in top text. And I just want boot my arm926ejs from a nandflash, not from a norflash(there is not a norflash in my custom board in the future). so the u-boot.bin is stored in a nandflash.
So Which things must I complete in the U-boot or just say Which files must I add or modify in the U-boot?
My english is bad or could you kindly talk with me about this?my Skepe is : liugeng-ws at 163.com
Thanks.
Best Wishs,
Wilow
--
View this message in context: http://www.nabble.com/the-custom-borad-supportting-nandflash-t896328.html#a2332651
Sent from the Uboot - Users forum at Nabble.com.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20060111/8a89ba0f/attachment.htm
Quoted 3 lines · In message <[email protected]> you wrote:
I do not think I describe my problem in top text. And I just want boot my arm926ejs from a nandflash, not from a norflash(there is not a norflash in my custom board in the future). so the u-boot.bin is stored in a nandflash.
So Which things must I complete in the U-boot or just say Which files must I add or modify in the U-boot?
Compare what has been done for other processors (at91rm9200dk); search for CONFIG_SKIP_LOWLEVEL_INIT
Best regards,
Wolfgang Denk
Signature · 4 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Only in our dreams we are free. The rest of the time we need wages.
- Terry Pratchett, _Wyrd Sisters_