Skip to contentSkip to conversation

Strange arm9 behaviour reading long(s) not aligned to 4 bytes boundary

U-Boot dibacco at libero.it 2 participants 2 messages Jan 24, 2009

lore
Share & tools
lore
#0 lore raw

Hi,

I have something like this on a 32 bit little endian arm9 board (SAM9 L9260):

char buffer[] = { 0, 1, 2, 3, 4, 5, 6, 7 };

long A = * ( (long*)
buffer );
long B = * ( (long*) (buffer + 2) );

printf("A: %08x B: %08x", A,
B);

I would expect that A = 0x03020100 and B = 0x05040302
instead I get the
right value for A but B is 0x01000302 or something like this but anyway not what I expect.
Is there something wrong on the board? It seems that only 4 bytes aligned long are read correctly.

Thank you in advance,
Antonio.

#1 lore raw
Quoted 14 lines · dibacco at libero.it

Hi,

I have something like this on a 32 bit little endian arm9 board (SAM9 L9260):

char buffer[] = { 0, 1, 2, 3, 4, 5, 6, 7 };

long A = * ( (long*)
buffer );
long B = * ( (long*) (buffer + 2) );

printf("A: %08x B: %08x", A,
B);

Quoted 6 lines

I would expect that A = 0x03020100 and B = 0x05040302
instead I get the
right value for A but B is 0x01000302 or something like this but anyway not what I expect.
Is there something wrong on the board? It seems that only 4 bytes aligned long are read correctly.

ARM9 does not support unaligned load/store. Yours is apparently configured in the round-and-rotate mode.

Signature · 2 lines
M?ns Rullg?rd
mans at mansr.com