Strange arm9 behaviour reading long(s) not aligned to 4 bytes boundary
Hi,
I have something like this on a 32 bit little endian arm9 board (SAM9 L9260):
char buffer[] = { 0, 1, 2, 3, 4, 5, 6, 7 };
long A = * ( (long*)
buffer );
long B = * ( (long*) (buffer + 2) );
printf("A: %08x B: %08x", A,
B);
I would expect that A = 0x03020100 and B = 0x05040302
instead I get the
right value for A but B is 0x01000302 or something like this but anyway not what I expect.
Is there something wrong on the board? It seems that only 4 bytes aligned long are read correctly.
Thank you in advance,
Antonio.
Quoted 14 lines · dibacco at libero.it
Hi,
I have something like this on a 32 bit little endian arm9 board (SAM9 L9260):
char buffer[] = { 0, 1, 2, 3, 4, 5, 6, 7 };
long A = * ( (long*)
buffer );
long B = * ( (long*) (buffer + 2) );printf("A: %08x B: %08x", A,
B);
Quoted 6 lines
I would expect that A =
0x03020100and B =0x05040302
instead I get the
right value for A but B is0x01000302or something like this but anyway not what I expect.
Is there something wrong on the board? It seems that only 4 bytes aligned long are read correctly.
ARM9 does not support unaligned load/store. Yours is apparently configured in the round-and-rotate mode.
Signature · 2 lines
M?ns Rullg?rd mans at mansr.com