NAND_ECC_NONE in u-boot question
Hi,
I am using 9G20 and set eccmode NAND_ECC_NONE in u-boot, but when I try to write some data from memory into flash with u-boot interface, it failed. (sam-ba can not read this page back from nand flash, it says a bad block). but I use NAND_ECC_SOFT, it is successful.
why? anyone can give some help?
Thanks in advance.
Signature · 2 lines
View this message in context: http://old.nabble.com/NAND_ECC_NONE-in-u-boot-question-tp26642489p26642489.html Sent from the Uboot - Users mailing list archive at Nabble.com.
Quoted 7 lines · joe zhou
Hi,
I am using 9G20 and set eccmode
NAND_ECC_NONEin u-boot, but when I try to write some data from memory into flash with u-boot interface, it failed. (sam-ba can not read this page back from nand flash, it says a bad block). but I useNAND_ECC_SOFT, it is successful.
why? anyone can give some help?
Telling U-Boot to ignore ECC (why do you want to do this?) does not also tell Linux to do so.
-Scott