Ide Floppy problems
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 14 lines
Quoted 8 lines
May 17 05:42:20 m kernel: hdd: lost interrupt May 17 05:42:20 m kernel: ide-floppy: CoD != 0 in idefloppy_pc_intr May 17 05:42:20 m kernel: hdd: ATAPI reset complete May 17 05:43:10 m kernel: hdd: lost interrupt May 17 05:43:10 m kernel: ide-floppy: CoD != 0 in idefloppy_pc_intr May 17 05:43:10 m kernel: hdd: ATAPI reset completeAfter another 1 minute of this repeated messages I push reset . Any ideeas ?
CONFIG_BLK_DEV_IDEFLOPPY=nCONFIG_BLK_DEV_IDESCSI=yCONFIG_SCSI=yCONFIG_BLK_DEV_SD=y
Quoted 4 lines
And, your ZIP drive shows up as SCSI disk. This also has the advantage that you can use ziptool to write protect / unprotect / eject ZIP disks. Ide-floppy never worker properly for me. Ide-scsi has worked without problems.
Does not work with SCSI drivers. Same kind of error .
May 18 03:10:02 m kernel: hdd: lost interrupt
May 18 03:10:02 m kernel: ide-scsi: CoD != 0 in idescsi_pc_intr
May 18 03:10:02 m kernel: hdd: ATAPI reset complete
May 18 03:10:02 m kernel: hdd: irq timeout: status=0x80 { Busy }Signature · 1 line
Mihai Moldovanu