Skip to contentSkip to conversation

Ide Floppy problems

DISCUSSION Mihai Moldovanu 1 participant 1 message May 18, 2001 1 message not in the archive

lore
Share & tools
lore
#1 lore raw
In reply to a message not in the archive
Quoted 14 lines
Quoted 8 lines
May 17 05:42:20 m kernel: hdd: lost interrupt
May 17 05:42:20 m kernel: ide-floppy: CoD != 0 in idefloppy_pc_intr
May 17 05:42:20 m kernel: hdd: ATAPI reset complete
May 17 05:43:10 m kernel: hdd: lost interrupt
May 17 05:43:10 m kernel: ide-floppy: CoD != 0 in idefloppy_pc_intr
May 17 05:43:10 m kernel: hdd: ATAPI reset complete

After another 1 minute of this repeated messages I push reset . Any ideeas ?

CONFIG_BLK_DEV_IDEFLOPPY=n
CONFIG_BLK_DEV_IDESCSI=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y

Quoted 4 lines

And, your ZIP drive shows up as SCSI disk. This also has the advantage that you can use ziptool to write protect / unprotect / eject ZIP disks. Ide-floppy never worker properly for me. Ide-scsi has worked without problems.

Does not work with SCSI drivers. Same kind of error .

May 18 03:10:02 m kernel: hdd: lost interrupt
May 18 03:10:02 m kernel: ide-scsi: CoD != 0 in idescsi_pc_intr
May 18 03:10:02 m kernel: hdd: ATAPI reset complete
May 18 03:10:02 m kernel: hdd: irq timeout: status=0x80 { Busy }
Signature · 1 line
Mihai Moldovanu