Skip to contentSkip to conversation

8139too: NETDEV WATCHDOG: eth0: transmit timed out

DISCUSSION Manfred Spraul 2 participants 2 messages Oct 11, 2001

lore
Share & tools
lore
#0 lore raw
Quoted 2 lines

Basic mode control register 0x0000: Auto-negotiation disabled!
Speed fixed at 10 mbps, half-duplex.

Do you use any user space tools to fix the link speed?

	mii-diag
	eth=0,0,<number>
	module parameter?

Could you please try what happens if you remove them.

Quoted 11 lines

Basic mode status register 0x0000 ... 0000.
Link status: not established.
Capable of <Warning! No media capabilities>.
Unable to perform Auto-negotiation, negotiation not complete.
This transceiver has no vendor identification.
I'm advertising 0000:
Advertising no additional info pages.
Using an unknown (non 802.3) encapsulation.
Link partner capability is 0000:.
Negotiation did not complete.

What is the link partner? hub, switch, fixed 10-mbit, dual-speed hub?

--
Manfred

#1 lore raw
Quoted 5 lines · Manfred Spraul

Do you use any user space tools to fix the link speed?

	mii-diag
	eth=0,0,<number>
	module parameter?

no

Quoted 1 line

What is the link partner? hub, switch, fixed 10-mbit, dual-speed hub?

10mb fixed hub:

	CentreCOM MR820TR
	IEEE 802.3 10BASE-T/10BASE2/AUI
	multiport micro hub/repeater
Signature · 1 line
Frank