8139too: NETDEV WATCHDOG: eth0: transmit timed out
Quoted 2 lines
Basic mode control register
0x0000: Auto-negotiation disabled!
Speed fixed at 10 mbps, half-duplex.
Do you use any user space tools to fix the link speed?
mii-diag eth=0,0,<number> module parameter?
Could you please try what happens if you remove them.
Quoted 11 lines
Basic mode status register
0x0000... 0000.
Link status: not established.
Capable of <Warning! No media capabilities>.
Unable to perform Auto-negotiation, negotiation not complete.
This transceiver has no vendor identification.
I'm advertising 0000:
Advertising no additional info pages.
Using an unknown (non 802.3) encapsulation.
Link partner capability is 0000:.
Negotiation did not complete.
What is the link partner? hub, switch, fixed 10-mbit, dual-speed hub?
--
Manfred
Quoted 5 lines · Manfred Spraul
Do you use any user space tools to fix the link speed?
mii-diag eth=0,0,<number> module parameter?
no
Quoted 1 line
What is the link partner? hub, switch, fixed 10-mbit, dual-speed hub?
10mb fixed hub:
CentreCOM MR820TR IEEE 802.3 10BASE-T/10BASE2/AUI multiport micro hub/repeater
Signature · 1 line
Frank