Write-combining
Dear list,
Sorry this maybe off topic-- I am writing a device driver for a kind of framebuffer device.
This is virtually complete and working, all I wish to add is write-combining but I can find
very little information on how to do this. Looking at other device drivers MTRR crops
up a few times but I is still not clear to me what I have to do.
So far-
I grab the memory region for the framebuffer (1/4Mb) something like so;
......
memio=ioremap(pci_resource_start(dev,MEMIO)&PCI_BASE_ADDRESS_MEM_MASK,MEMIO_SIZE);
......
then try to mtrr it
.....
err=mtrr_add(memio,MEMIO_SIZE,MTRR_TYPE_WRCOMB,1);
......
which fails because memio is not aligned correctly
my code generates the following messages
slm: init: mtrr option enabled- trying region cc960000
mtrr: base(0xcc960000) is not aligned on a size(0x40000) boundary
slm: init: mtrr: unable to set write combining for slm memory :(
Before I go any further I would like to ask is this a sensible approach or have I missed
something somewhere?
If this is not the most sensible way please point me towards a sensible solution-
If this is the correct way of doing things is there
Quoted 1 line
an easy way to discover the mtrr alignment requirements prior to
mtrr_add?
Quoted 2 lines
Can I align memio properly (how?) or
do I start by defining a larger mtrr region below memio and then
masking off the
unwanted regions either side of my memory region withmtrr(...MTRR_TYPE_WRBACK..)?
Quoted 1 line
What happens on none x86 type processors?
any other advice?
Thanks SA