select CRC32
Subsystems (6)
PATCH 1/1 select CRC32
Use "select CRC32" in Kconfig instead of makefile includes.
drivers/media/dvb/dvb-core/Kconfig +1 -0
@@ -1,6 +1,7 @@ config DVB_CORE tristate "DVB Core Support" depends on DVB + select CRC32 help DVB core utility functions for device handling, software fallbacks etc.
drivers/media/dvb/dvb-core/Makefile.lib +0 -1
@@ -1 +0,0 @@ -obj-$(CONFIG_DVB_CORE) += crc32.o
drivers/net/arm/Kconfig +2 -0
@@ -5,6 +5,7 @@ config ARM_AM79C961A bool "ARM EBSA110 AM79C961A support" depends on NET_ETHERNET && ARM && ARCH_EBSA110 + select CRC32 help If you wish to compile a kernel for the EBSA-110, then you should always answer Y to this.
@@ -26,6 +27,7 @@ config ARM_ETHERH tristate "I-cubed EtherH/ANT EtherM support" depends on NET_ETHERNET && ARM && ARCH_ACORN + select CRC32 help If you have an Acorn system with one of these network cards, you should say Y to this option if you wish to use it with Linux.
drivers/net/Kconfig +57 -0
399 lines not on this page · raw message
drivers/net/Makefile.lib +0 -76
76 lines not on this page · raw message
drivers/net/pcmcia/Kconfig +3 -0
@@ -44,6 +44,7 @@ config PCMCIA_FMVJ18X tristate "Fujitsu FMV-J18x PCMCIA support" depends on NET_PCMCIA && PCMCIA + select CRC32 help Say Y here if you intend to attach a Fujitsu FMV-J18x or compatible PCMCIA (PC-card) Ethernet card to your computer.
@@ -54,6 +55,7 @@ config PCMCIA_PCNET tristate "NE2000 compatible PCMCIA support" depends on NET_PCMCIA && PCMCIA + select CRC32 help Say Y here if you intend to attach an NE2000 compatible PCMCIA (PC-card) Ethernet or Fast Ethernet card to your computer.
@@ -74,6 +76,7 @@ config PCMCIA_SMC91C92 tristate "SMC 91Cxx PCMCIA support" depends on NET_PCMCIA && PCMCIA + select CRC32 help Say Y here if you intend to attach an SMC 91Cxx compatible PCMCIA (PC-card) Ethernet or Fast Ethernet card to your computer.
drivers/net/tulip/Kconfig +6 -0
@@ -13,6 +13,7 @@ config DE2104X tristate "Early DECchip Tulip (dc2104x) PCI support (EXPERIMENTAL)" depends on NET_TULIP && PCI && EXPERIMENTAL + select CRC32 ---help--- This driver is developed for the SMC EtherPower series Ethernet cards and also works with cards based on the DECchip
@@ -30,6 +31,7 @@ config TULIP tristate "DECchip Tulip (dc2114x) PCI support" depends on NET_TULIP && PCI + select CRC32 ---help--- This driver is developed for the SMC EtherPower series Ethernet cards and also works with cards based on the DECchip
@@ -69,6 +71,7 @@ config DE4X5 tristate "Generic DECchip & DIGITAL EtherWORKS PCI/EISA" depends on NET_TULIP && (PCI || EISA) + select CRC32 ---help--- This is support for the DIGITAL series of PCI/EISA Ethernet cards. These include the DE425, DE434, DE435, DE450 and DE500 models. If
@@ -85,6 +88,7 @@ config WINBOND_840 tristate "Winbond W89c840 Ethernet support" depends on NET_TULIP && PCI + select CRC32 help This driver is for the Winbond W89c840 chip. It also works with the TX9882 chip on the Compex RL100-ATX board.
@@ -94,6 +98,7 @@ config DM9102 tristate "Davicom DM910x/DM980x support" depends on NET_TULIP && PCI + select CRC32 ---help--- This driver is for DM9102(A)/DM9132/DM9801 compatible PCI cards from Davicom (<http://www.davicom.com.tw/>). If you have such a network
@@ -120,6 +125,7 @@ config PCMCIA_XIRTULIP tristate "Xircom Tulip-like CardBus support (old driver)" depends on NET_TULIP && CARDBUS && BROKEN_ON_SMP + select CRC32 ---help--- This driver is for the Digital "Tulip" Ethernet CardBus adapters. It should work with most DEC 21*4*-based chips/ethercards, as well
drivers/usb/Makefile.lib +0 -3
@@ -1,3 +0,0 @@ -obj-$(CONFIG_USB_CATC) += crc32.o -obj-$(CONFIG_USB_SPEEDTOUCH) += crc32.o -obj-$(CONFIG_USB_USBNET) += crc32.o
drivers/usb/misc/Kconfig +1 -0
@@ -84,6 +84,7 @@ config USB_SPEEDTOUCH tristate "Alcatel Speedtouch USB support" depends on USB && ATM + select CRC32 help Say Y here if you have an Alcatel SpeedTouch USB or SpeedTouch 330 modem. In order to use your modem you will need to install some user
drivers/usb/net/Kconfig +2 -0
@@ -10,6 +10,7 @@ config USB_CATC tristate "USB CATC NetMate-based Ethernet device support (EXPERIMENTAL)" depends on USB && NET && EXPERIMENTAL + select CRC32 ---help--- Say Y if you want to use one of the following 10Mbps USB Ethernet device based on the EL1210A chip. Supported devices are:
@@ -94,6 +95,7 @@ config USB_USBNET tristate "Multi-purpose USB Networking Framework" depends on USB && NET + select CRC32 ---help--- This driver supports several kinds of network links over USB, with "minidrivers" built around a common network driver core
fs/Kconfig +1 -0
@@ -1046,6 +1046,7 @@ config JFFS2_FS tristate "Journalling Flash File System v2 (JFFS2) support" depends on MTD + select CRC32 help JFFS2 is the second generation of the Journalling Flash File System for use on diskless embedded devices. It provides improved wear
fs/Makefile.lib +0 -2
@@ -1,2 +0,0 @@ -obj-$(CONFIG_JFFS2_FS) += crc32.o -obj-$(CONFIG_EFI_PARTITION) += crc32.o
fs/partitions/Kconfig +1 -0
@@ -227,6 +227,7 @@ config EFI_PARTITION bool "EFI GUID Partition support" depends on PARTITION_ADVANCED + select CRC32 help Say Y here if you would like to use hard disks under Linux which were partitioned using EFI GPT. Presently only useful on the
lib/Makefile +0 -6
@@ -20,12 +20,6 @@ obj-$(CONFIG_ZLIB_INFLATE) += zlib_inflate/ obj-$(CONFIG_ZLIB_DEFLATE) += zlib_deflate/ -include drivers/net/Makefile.lib -include drivers/usb/Makefile.lib -include fs/Makefile.lib -include net/bluetooth/bnep/Makefile.lib -include drivers/media/dvb/dvb-core/Makefile.lib - host-progs := gen_crc32table clean-files := crc32table.h
net/bluetooth/bnep/Kconfig +1 -0
@@ -1,6 +1,7 @@ config BT_BNEP tristate "BNEP protocol support" depends on BT && BT_L2CAP + select CRC32 help BNEP (Bluetooth Network Encapsulation Protocol) is Ethernet emulation layer on top of Bluetooth. BNEP is required for Bluetooth
net/bluetooth/bnep/Makefile.lib +0 -1
@@ -1 +0,0 @@ -obj-$(CONFIG_BT_BNEP) += crc32.o
Quoted 1 line · Brian Gerst
Use "select CRC32" in
Kconfiginstead of makefile includes.
Hi Brian - looks good to me.
I will apply it to my local tree if Linus does not take it.
Sam