Skip to contentSkip to conversation

LInksys WMP11 (BCM4301 chip)

DISCUSSION David Ford 2 participants 2 messages Sep 27, 2003 – Sep 28, 2003

lore
Share & tools
lore

David Ford

author
#0 lore raw

According to http://www.linuxworld.com/story/33804.htm, (Andrew Miklas), the BCM4301 is supported however I don't see any such critter in my source.

I find numerous mentions on the web about the v2.7 model of this bugger having switched to the BCM chip instead of the Prism chip.

Is there really any [kernel 2.6] support for this thing somewhere or do I have to email LinkSys a nastygram? :)

David

#1 lore raw
Quoted 2 lines · David Ford

According to http://www.linuxworld.com/story/33804.htm, (Andrew Miklas), the BCM4301 is supported however I don't see any such critter in my source.

This is a _terribly_ misleading article. There are only a few little bits of truth in the article you have referenced, and even that has been spun to exagerate the truth.

Broadcom has never released the source for the referenced chips to the general public. Those are closed source, binary-only, mipsel drivers for kernel 2.4.5 that are embedded within the device firmware.

-Erik

--
Erik B. Andersen http://codepoet-consulting.com/
--This message was written using 73% post-consumer electrons--