boot linux_ppc_2_4
Hi
I have a U-Boot which is working just fine,
and I'm trying to boot a kernel(ver 2.4) image with it , after I load the uImage to the DRAM by using the tftp as it is described in the README file, I'm doing bootm to the uImage location,
I see that the code is getting to the kernel code , but there it get lost after we disable the MMU in head.S.
(I know that the kernel version I have should be stable on my board cause with the DINK monitor
I can load it just fine.)
Are there any special changes I should make to the Kernel in order for it to be able to boot from the U-Boot??
If so, where can I find a good reference for it??
Thanks a lot
--
Ronen Shitrit
M.S.I.L
D.N. Misgav 20184
Tel: +972-4-9951000 Fax: +972-4-9951001 Email: mailto: [email protected]
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
Quoted 3 lines · In message <[email protected]> you wrote:
I have a U-Boot which is working just fine,
and I'm trying to boot a kernel(ver 2.4) image with it ,
Please do not post the same message to several mailing lists.
Answered in u-boot-users.
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: [email protected] 1 1 was a race-horse, 2 2 was 1 2. When 1 1 1 1 race, 2 2 1 1 2.
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/