[Fwd: Re: sharp mobilon hc-4100]
Quoted 30 lines · Volker Jahns
Modifications are certainly a must:
e.g. 2.4.20 in
drivers/video/tx3912fb.hthereis _only_ framebuffer definitions for the nino:
<pre>
#ifdefined(CONFIG_NINO_4MB)||defined(CONFIG_NINO_8MB)
#defineFB_X_RES240 #defineFB_Y_RES320
#ifdefined(CONFIG_FBCON_CFB4)
#defineFB_BPP4
</pre>while 2.4.0-test9 carries the _good_ information for the velo 1, velo 500 and for the helio ( the code for the nino is missing here). In
drivers/video/r3912fb.h( which seems to be the historic version oftx3912fb.h, ouch what a chaos :-( <pre>
#ifdefCONFIG_PHILIPS_VELO
# ifdefCONFIG_PHILIPS_VELO1
# defineFB_X_RES480
# elifdefined(CONFIG_PHILIPS_VELO500)
# defineFB_X_RES640# endif # define FB_Y_RES 240 # ifdef CONFIG_PHILIPS_VELO_4GRAY # define FB_BPP 2 # else /* CONFIG_PHILIPS_VELO_16GRAY */ # define FB_BPP 4 # endif # define FB_IS_GREY 1 # define FB_IS_INVERSE 0 # define VIDEORAM_SIZE (FB_X_RES * FB_Y_RES * FB_BPP / 8)</pre>
Quoted 8 lines
On the other hand the mobilon needs <pre>
# define FB_X_RES 640 # define FB_X_RES 240 # define FB_BPP 4</pre>
This information ( and what else which might be of interest to make the LCD working on this thing) must have get lost on the kernel's way. I really wonder where to find a more or less functional version of the kernel code to start with.
The 2.4.17 tree on Steven J. Hill's website is functional, I can give it
to you if you cant find it, just let me know.
By the way, when I refer to functional is for the TX3912 generic stuff, one thing for sure is that you _WILL_ need to make an specific machine directory for the mobilon, and you can use the same code for it, after removing the non-generic tx3912 stuff and perhaps changing some stuff that matters only to the mobilon.
You can also try hacking on the nino files as if you were using a nino.
P.D. Remove the html tags
Signature · 8 lines
Ricardo Mendoza Meinhardt [email protected] .knxTech Administrador Linux Programador/PHP "get ready for a bit of the old Ultra Violence"
Quoted 2 lines · Ricardo Mendoza
The 2.4.17 tree on Steven J. Hill's website is functional, I can give it
to you if you cant find it, just let me know.
Would be nice if somebody can resurrect this platform. It's rotting for too long and Steven even convinced me to remove it from 2.6. I hope we can add functional code back somewhen.
Ralf
Quoted 3 lines · Ralf Baechle
Would be nice if somebody can resurrect this platform. It's rotting for too long and Steven even convinced me to remove it from 2.6. I hope we can add functional code back somewhen.
Hey Ralf, well as you know I have been getting involved in that, as far as today PCMCIA IDE kind of works, but the real plan is to develop a PCMCIA driver for the controller.
Im ricmm, perhaps now that vacations started for me I can really get into the stuff, I will let you know if I get into porting it to the 2.6 kernel.
Signature · 8 lines
Ricardo Mendoza Meinhardt [email protected] .knxTech Administrador Linux Programador/PHP "get ready for a bit of the old Ultra Violence"