Skip to contentSkip to conversation

[Fwd: Re: sharp mobilon hc-4100]

Fwd: Re: sharp mobilon hc-4100 Ricardo Mendoza 2 participants 3 messages Jul 8, 2004 – Jul 9, 2004 MIPS

lore
Share & tools
lore
#0 lore raw
Quoted 30 lines · Volker Jahns

Modifications are certainly a must:

e.g. 2.4.20 in drivers/video/tx3912fb.h thereis _only_ framebuffer definitions for the nino:
<pre>
#if defined(CONFIG_NINO_4MB) || defined(CONFIG_NINO_8MB)
#define FB_X_RES 240 #define FB_Y_RES 320
#if defined(CONFIG_FBCON_CFB4)
#define FB_BPP 4
</pre>

while 2.4.0-test9 carries the _good_ information for the velo 1, velo 500 and for the helio ( the code for the nino is missing here). In drivers/video/r3912fb.h ( which seems to be the historic version of tx3912fb.h, ouch what a chaos :-( <pre>
#ifdef CONFIG_PHILIPS_VELO
# ifdef CONFIG_PHILIPS_VELO1
# define FB_X_RES 480
# elif defined(CONFIG_PHILIPS_VELO500)
# define FB_X_RES 640

#       endif
#       define  FB_Y_RES        240
#       ifdef CONFIG_PHILIPS_VELO_4GRAY
#               define FB_BPP   2
#       else /* CONFIG_PHILIPS_VELO_16GRAY */
#               define FB_BPP   4
#       endif
#       define FB_IS_GREY     1
#       define FB_IS_INVERSE  0
#       define VIDEORAM_SIZE  (FB_X_RES * FB_Y_RES * FB_BPP / 8)

</pre>

Quoted 8 lines

On the other hand the mobilon needs <pre>

#               define FB_X_RES         640
#               define FB_X_RES         240
#               define FB_BPP           4

</pre>

This information ( and what else which might be of interest to make the LCD working on this thing) must have get lost on the kernel's way. I really wonder where to find a more or less functional version of the kernel code to start with.

The 2.4.17 tree on Steven J. Hill's website is functional, I can give it
to you if you cant find it, just let me know.

By the way, when I refer to functional is for the TX3912 generic stuff, one thing for sure is that you _WILL_ need to make an specific machine directory for the mobilon, and you can use the same code for it, after removing the non-generic tx3912 stuff and perhaps changing some stuff that matters only to the mobilon.

You can also try hacking on the nino files as if you were using a nino.

P.D. Remove the html tags

Signature · 8 lines
Ricardo Mendoza Meinhardt
[email protected]

.knxTech
Administrador Linux
Programador/PHP

"get ready for a bit of the old Ultra Violence"
#1 lore raw
Quoted 2 lines · Ricardo Mendoza

The 2.4.17 tree on Steven J. Hill's website is functional, I can give it
to you if you cant find it, just let me know.

Would be nice if somebody can resurrect this platform. It's rotting for too long and Steven even convinced me to remove it from 2.6. I hope we can add functional code back somewhen.

Ralf

#2 lore raw
Quoted 3 lines · Ralf Baechle

Would be nice if somebody can resurrect this platform. It's rotting for too long and Steven even convinced me to remove it from 2.6. I hope we can add functional code back somewhen.

Hey Ralf, well as you know I have been getting involved in that, as far as today PCMCIA IDE kind of works, but the real plan is to develop a PCMCIA driver for the controller.

Im ricmm, perhaps now that vacations started for me I can really get into the stuff, I will let you know if I get into porting it to the 2.6 kernel.

Signature · 8 lines
Ricardo Mendoza Meinhardt
[email protected]

.knxTech
Administrador Linux
Programador/PHP

"get ready for a bit of the old Ultra Violence"