Skip to contentSkip to conversation

writing jffs2 file system trought JTAG

DISCUSSION Paolo Tagliavini 2 participants 2 messages Feb 26, 2005 Memory technology devices (MTD)

lore
Share & tools
lore
#0 lore raw

Dear all ,

I'm working on ARM920 based embedded system. Linux kernel is 2.4.20. This system mount a 64 Mbyte Samsung NAND flash.
My simple questions are:
Is it possible write in nand flash the jffs2 image , made with
mkfs.jffs2 , using JTAG interface ?
Is there any way to handle nand bad block dowloadind jffs2 image
trought JTAG interface ?

Best regards

Paolo Tagliavini

#1 lore raw
Quoted 9 lines · Paolo Tagliavini

Dear all ,

I'm working on ARM920 based embedded system. Linux kernel is 2.4.20. This system mount a 64 Mbyte Samsung NAND flash.
My simple questions are:
Is it possible write in nand flash the jffs2 image , made with
mkfs.jffs2 , using JTAG interface ?
Is there any way to handle nand bad block dowloadind jffs2 image
trought JTAG interface ?

Read

http://www.linux-mtd.infradead.org/tech/faq.html

The section "Must my bootloader be aware of NAND FLASH ?" has all the answers. The requirements for JTAG programming are the same as for bootloaders.

tglx