writing jffs2 file system trought JTAG
Dear all ,
I'm working on ARM920 based embedded system. Linux kernel is 2.4.20. This system mount a 64 Mbyte Samsung NAND flash.
My simple questions are:
Is it possible write in nand flash the jffs2 image , made with
mkfs.jffs2 , using JTAG interface ?
Is there any way to handle nand bad block dowloadind jffs2 image
trought JTAG interface ?
Best regards
Paolo Tagliavini
Quoted 9 lines · Paolo Tagliavini
Dear all ,
I'm working on ARM920 based embedded system. Linux kernel is 2.4.20. This system mount a 64 Mbyte Samsung NAND flash.
My simple questions are:
Is it possible write in nand flash the jffs2 image , made with
mkfs.jffs2 , using JTAG interface ?
Is there any way to handle nand bad block dowloadind jffs2 image
trought JTAG interface ?
Read
http://www.linux-mtd.infradead.org/tech/faq.html
The section "Must my bootloader be aware of NAND FLASH ?" has all the answers. The requirements for JTAG programming are the same as for bootloaders.
tglx