[Fwd: Delivery Status Notification (Failure)]
Unfortunately...
This is an automatically generated Delivery Status Notification.
Unable to deliver message to the following recipients, due to being unable to connect successfully to the destination mail server.
Frist Name : Nebojsa
Last Name : Trpkovic
Mail Date : 2005/5/17
Mail Address : [email protected]
Select Country : Germany
Telephone No :
FAX No :
Main Board Model : VNF3-250
VGA Type : Xelo Ti4200 8x
Product Serial Number : 0412035507
Distributor / Retailer : http://www.dualc.co.yu/
Problem Description : So, I have this issue and as I can see there are more people out there that have the same issue.<br>
On my board C'n'Q works fine if there is one RAM module. If there is two modules (no matter dimm 1 & 2 or 1 & 3 are populated) C'n'Q locks machine and I have to do hard reset.<br>
<br>
Memory modules are 2 x Kingmax Color RAM 466MHz CAS 3.0 256MB single sidded modules, running at 400MHz with timmings "BY SPD". In that situation, command rate is 2T but it does not help.<br>
It happens both in Windows and in Linux (Gentoo Linux with 2.6.11 kernel).<br>
<br>
C'n'Q works just as it should work if I put just one memory module, both in Windows and in Linux.<br>
<br>
All that is not so big problem to me because there's no way to dinamicly slow down fans on the board, so any dinamic changing of frequency looses its' significance.<br>
I wrote this to you because AMD represent on cpufreq list told me so.<br> <br>
Regards,<br>
Nebojsa Trpkovic<br>
<br>P.S. I'm from Serbia & Montenegro and there's no way to select my country.<br>
<br>
<br>
<br>
<br>
If this problem also occurs on Windows, please report<br>
it to your motherboard manufacturer immediately. They'll<br> get it fixed.<br>
<br>
-Mark Langsdorf<br>
AMD, Inc.<br>
<br>
<br>
Quoted 35 lines
Quoted 13 lines
-----Original Message-----<br>
From: [email protected] <br> [mailto:[email protected]] On Behalf Of <br> Nebojsa Trpkovic<br>
Sent: Sunday, May 15, 2005 6:50 PM<br>
To: [email protected]<br>
Subject: Re: cpu-freq causing kernel lock-up after upgrading <br> to 1GB ram.<br>
<br>
<br>
Same problem here - VNF3-250 - if there's one RAM module <br> C'n'Q works fine, and if I put two modules it freezes every <br> time I try to change frequency, no matter linux or windows. <br>Quoted 8 lines
So, it's not cpufreq related problem - it just buggy VNF3-250 <br> C'n'Q inplementation.<br>
<br>
<br>
<br>
<br>
chris stones wrote:<br>
<br><br>
Quoted 1 line
Quoted 1 line
Quoted 1 line
This is my first attempt at a bug report, so forgive me for <br>
<br>
Quoted 1 line
making a <br>
<br>
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
mess, I will try my best.<br>
<br>
-------------------------<br>
hardware:<br>
-------------------------<br>
mobo: Chaintech VNF3-250<br>
chipset: nForce-3<br>
CPU: amd64 Athlon 3400+<br>
Ram: 2 * Kingston 512Meg DDR400 PC3200 2T timeing 3-3-8-3. <br>
Quoted 10 lines
<br>
Quoted 1 line
(total 1GB) <br>
<br>
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Swap : 1.3 Gb.<br>
<br>
--------------------------<br>
software:<br>
--------------------------<br>
Distro: Gentoo 2005.0 (comiped as 64bit with multilib)<br>
GCC: gcc version 3.4.3 20041125 (Gentoo Linux 3.4.3-r1,
ssp-3.4.3-0,<br>
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
pie-8.7.7)<br>
kernel versions: gentoo 2.6.11-r7; vanilla-2.6.10;
vanilla-2.6.11.9<br>
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
<br>
--------------------------<br>
description:<br>
--------------------------<br>
I have been using the modulesfreq_table,cpufreq_ondemand, <br>powernow_k8to regulate my cpu clock for over 6 months with the <br> hardware configureation shown above, minus one 512meg ram
module.<br>
Quoted 5 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
<br>
Recently, i shutdown the box, and added the second memory <br><br>
Quoted 1 line
module. At <br>
<br>
Quoted 13 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
the time, the
cpu_fredrivers were compiled into the <br><br>
Quoted 1 line
kernel, shortly <br>
<br>
Quoted 1 line
Quoted 1 line
Quoted 1 line
after booting, the system would freese when
cpu_freq<br><br>
Quoted 1 line
lowered my cpu to <br>
<br>
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
its idle state of 1Ghz.<br>
<br>
These conditions must all be met to cause the lock-up.<br>
1) Both Ram moodules are used (1GB ram)<br>
2) the modulesfreq_table,cpufreq_ondemand,powernow_k8are
loaded.<br>
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
3) The lockup occurs when the cpu is slowing down from a period of
<br>
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
heavy load.<br>
<br>
2 hours running memtest86 shows that my memory is not the
problem.<br>
Quoted 6 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
<br>
one one occasion, the kernel gave a memory dump before the <br><br>
Quoted 1 line
freeze. i <br>
<br>
Quoted 1 line
Quoted 1 line
Quoted 1 line
regret i didnt take note of its rull contents, but a function trace
<br>
Quoted 21 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
line mentioned a
cpu_freqfunction call.<br>
<br>
If i remove one of the 512meg memory modules, thecpu_freq<br> performsperfectly, as it has for the past 6 months.<br> <br>
Thankyou for taking the time to read my post.<br>
Is there anything i can do (other than go without ram or <br><br>
Quoted 1 line
cpu_freq) to <br><br>
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
solve this ? is there any more information you require from me ?<br> <br>
I have googled, but found no other similar bug reports.<br> <br>
From [email protected].<br>
<br>
_______________________________________________<br> Cpufreq mailing list<br>
[email protected] <br>
http://lists.linux.org.uk/mailman/listinfo/cpufreq<br>
<br>
Quoted 9 lines
<br>
Quoted 8 lines
<br>
<br> _______________________________________________<br> Cpufreq mailing list<br> [email protected] <br>
http://lists.linux.org.uk/mailman/listinfo/cpu> freq<br> <br>
<br>
BIOS Date : 2004/10/19
CD Version :
Operating System : both Windows and Linux 2.6.11 CPU Type : AMD Athlon64 3000+ (Newcastle core) Memory Modules : 2 x 256MB Kingmax Color RAM 466MHz CAS 3.0 Other Devices :
_______________________________________________
Cpufreq mailing list
[email protected]
http://lists.linux.org.uk/mailman/listinfo/cpufreq