Motorola HS805 Headset Help Request
Hi,
first of all sorry for my poor english! I have this problem: yesterday i bought an USB Bluetooth adaptor(TRUST BT180) + a HS805 Wireless Headset. With Windows XP no problem, so i'm quite sure that all things seems to work. Obviously i would like to get things work with Linux too! I have installed Ubuntu Hoary. Installed also the Bluez framework (first from packages, than from scratch).
That's the output of hciconfig -a
ci0: Type: USB
BD Address: 00:0B:0D:60:B5:F3 ACL MTU: 377:10 SCO MTU: 16:0 UP RUNNING PSCAN ISCAN AUTH ENCRYPT
RX bytes:1390 acl:15 sco:0 events:106 errors:0
TX bytes:1673 acl:16 sco:0 commands:69 errors:0
Features: 0xff 0xfe 0x0d 0x38 0x08 0x08 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'BlueZ (0)'
Class: 0x3e0100
Service Classes: Networking, Rendering, Capturing
Device Class: Computer, Uncategorized
HCI Ver: 1.2 (0x2) HCI Rev: 0x4 LMP Ver: 1.2 (0x2) LMP Subver: 0x309
Manufacturer: Broadcom Corporation (15)
Info for the headset using hcitool
BD Address: 00:0B:2E:31:33:36
Device Name: Motorola HS805
LMP Version: 1.2 (0x2) LMP Subversion: 0x60d
Manufacturer: Cambridge Silicon Radio (10)
Features: 0xff 0xff 0x0b 0x00 0x08 0x08 0x00 0x00
<3-slot packets> <5-slot packets> <encryption> <slot offset> <timing accuracy> <role switch> <hold mode> <sniff mode> <park state> <RSSI> <channel quality> <SCO link> <HV2
packets>
<HV3 packets> <u-law log> <A-law log> <CVSD> <paging scheme> <transparent SCO> <AFH cap. slave> <AFH cap. master>
i built alsa-bluetooth with success. After some work.. the connection worked: this is the output...
root@ubuntu:/susers/andrea/tmp/bluez-utils-2.17/tools# /usr/bin/btsco -v 00:0B:2E:31:33:36 btsco v0.4c Device is 0:0 Voice setting: 0x0060 RFCOMM channel 1 connected recieved AT+CKPD=200 speaker volume: 11 mic volume: 1 i/o needed: connecting sco... connected SCO channel Done setting sco fd recieved AT+VGS=11 Sending up speaker change 11 recieved AT+VGS=13 Sending up speaker change 13 recieved AT+VGS=11 Sending up speaker change 11 recieved AT+VGS=09 Sending up speaker change 9 recieved AT+CKPD=200 recieved AT+CKPD=200 recieved AT+VGS=11 Sending up speaker change 11 recieved AT+VGS=13 Sending up speaker change 13 recieved AT+VGS=15 Sending up speaker change 15 recieved AT+CKPD=200
If i press the buttons on my headset, the volume decrease and increase (look at the previous output)...
The problem is that i hear no sound! And mic doesn't work... but if i increase the volume i hear some "clips"... but nothing more... Maybe it's something related with SCO? What does mean RX bytes:1390 acl:15 sco:0 events:106 errors:0
TX bytes:1673 acl:16 sco:0 commands:69 errors:0 ?
I really appreciate your help!
Cheers,
Andrea
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
run
hciconfig hci0 revision
as root to see the chipset and sco routing
Quoted 77 lines · Andrea Cimino
Hi,
first of all sorry for my poor english! I have this problem: yesterday i bought an USB Bluetooth adaptor(TRUST BT180) + a HS805 Wireless Headset. With Windows XP no problem, so i'm quite sure that all things seems to work. Obviously i would like to get things work with Linux too! I have installed Ubuntu Hoary. Installed also the Bluez framework (first from packages, than from scratch).That's the output of hciconfig -a
ci0: Type: USB
BD Address: 00:0B:0D:60:B5:F3 ACL MTU: 377:10 SCO MTU: 16:0 UP RUNNING PSCAN ISCAN AUTH ENCRYPT
RX bytes:1390 acl:15 sco:0 events:106 errors:0
TX bytes:1673 acl:16 sco:0 commands:69 errors:0
Features:0xff0xfe0x0d0x380x080x080x000x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'BlueZ (0)'
Class:0x3e0100
Service Classes: Networking, Rendering, Capturing
Device Class: Computer, Uncategorized
HCI Ver: 1.2 (0x2) HCI Rev:0x4LMP Ver: 1.2 (0x2) LMP Subver:0x309
Manufacturer: Broadcom Corporation (15)Info for the headset using hcitool
BD Address: 00:0B:2E:31:33:36
Device Name: Motorola HS805
LMP Version: 1.2 (0x2) LMP Subversion:0x60d
Manufacturer: Cambridge Silicon Radio (10)
Features:0xff0xff0x0b0x000x080x080x000x00
<3-slot packets> <5-slot packets> <encryption> <slot offset> <timing accuracy> <role switch> <hold mode> <sniff mode> <park state> <RSSI> <channel quality> <SCO link> <HV2
packets>
<HV3 packets> <u-law log> <A-law log> <CVSD> <paging scheme> <transparent SCO> <AFH cap. slave> <AFH cap. master>i built alsa-bluetooth with success. After some work.. the connection worked: this is the output...
root@ubuntu:/susers/andrea/tmp/bluez-utils-2.17/tools# /usr/bin/btsco -v 00:0B:2E:31:33:36 btsco v0.4c Device is 0:0 Voice setting: 0x0060 RFCOMM channel 1 connected recieved AT+CKPD=200 speaker volume: 11 mic volume: 1 i/o needed: connecting sco... connected SCO channel Done setting sco fd recieved AT+VGS=11 Sending up speaker change 11 recieved AT+VGS=13 Sending up speaker change 13 recieved AT+VGS=11 Sending up speaker change 11 recieved AT+VGS=09 Sending up speaker change 9 recieved AT+CKPD=200 recieved AT+CKPD=200 recieved AT+VGS=11 Sending up speaker change 11 recieved AT+VGS=13 Sending up speaker change 13 recieved AT+VGS=15 Sending up speaker change 15 recieved AT+CKPD=200If i press the buttons on my headset, the volume decrease and increase (look at the previous output)...
The problem is that i hear no sound! And mic doesn't work... but if i increase the volume i hear some "clips"... but nothing more... Maybe it's something related with SCO? What does mean RX bytes:1390 acl:15 sco:0 events:106 errors:0TX bytes:1673 acl:16 sco:0 commands:69 errors:0 ?I really appreciate your help!
Cheers,
Andrea
Quoted 9 lines
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users