Skip to contentSkip to conversation

Motorola HS805 Headset Help Request

Bluez-users Andrea Cimino 2 participants 2 messages Jul 4, 2005 Bluetooth drivers

lore
Share & tools
lore
#0 lore raw

Hi,
first of all sorry for my poor english! I have this problem: yesterday i bought an USB Bluetooth adaptor(TRUST BT180) + a HS805 Wireless Headset. With Windows XP no problem, so i'm quite sure that all things seems to work. Obviously i would like to get things work with Linux too! I have installed Ubuntu Hoary. Installed also the Bluez framework (first from packages, than from scratch).

That's the output of hciconfig -a

ci0: Type: USB
BD Address: 00:0B:0D:60:B5:F3 ACL MTU: 377:10 SCO MTU: 16:0 UP RUNNING PSCAN ISCAN AUTH ENCRYPT
RX bytes:1390 acl:15 sco:0 events:106 errors:0
TX bytes:1673 acl:16 sco:0 commands:69 errors:0
Features: 0xff 0xfe 0x0d 0x38 0x08 0x08 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'BlueZ (0)'
Class: 0x3e0100
Service Classes: Networking, Rendering, Capturing
Device Class: Computer, Uncategorized
HCI Ver: 1.2 (0x2) HCI Rev: 0x4 LMP Ver: 1.2 (0x2) LMP Subver: 0x309
Manufacturer: Broadcom Corporation (15)

Info for the headset using hcitool

BD Address: 00:0B:2E:31:33:36
Device Name: Motorola HS805
LMP Version: 1.2 (0x2) LMP Subversion: 0x60d
Manufacturer: Cambridge Silicon Radio (10)
Features: 0xff 0xff 0x0b 0x00 0x08 0x08 0x00 0x00
<3-slot packets> <5-slot packets> <encryption> <slot offset> <timing accuracy> <role switch> <hold mode> <sniff mode> <park state> <RSSI> <channel quality> <SCO link> <HV2
packets>
<HV3 packets> <u-law log> <A-law log> <CVSD> <paging scheme> <transparent SCO> <AFH cap. slave> <AFH cap. master>

i built alsa-bluetooth with success. After some work.. the connection worked: this is the output...

root@ubuntu:/susers/andrea/tmp/bluez-utils-2.17/tools# /usr/bin/btsco -v 00:0B:2E:31:33:36
btsco v0.4c
Device is 0:0
Voice setting: 0x0060
RFCOMM channel 1 connected
recieved AT+CKPD=200
speaker volume: 11 mic volume: 1
i/o needed: connecting sco...
connected SCO channel
Done setting sco fd
recieved AT+VGS=11
Sending up speaker change 11
recieved AT+VGS=13
Sending up speaker change 13
recieved AT+VGS=11
Sending up speaker change 11
recieved AT+VGS=09
Sending up speaker change 9
recieved AT+CKPD=200
recieved AT+CKPD=200
recieved AT+VGS=11
Sending up speaker change 11
recieved AT+VGS=13
Sending up speaker change 13
recieved AT+VGS=15
Sending up speaker change 15
recieved AT+CKPD=200

If i press the buttons on my headset, the volume decrease and increase (look at the previous output)...
The problem is that i hear no sound! And mic doesn't work... but if i increase the volume i hear some "clips"... but nothing more... Maybe it's something related with SCO? What does mean RX bytes:1390 acl:15 sco:0 events:106 errors:0

      TX bytes:1673 acl:16 sco:0 commands:69 errors:0 ?

I really appreciate your help!

Cheers,
Andrea

-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

#1 lore raw

run
hciconfig hci0 revision
as root to see the chipset and sco routing

Quoted 77 lines · Andrea Cimino

Hi,
first of all sorry for my poor english! I have this problem: yesterday i bought an USB Bluetooth adaptor(TRUST BT180) + a HS805 Wireless Headset. With Windows XP no problem, so i'm quite sure that all things seems to work. Obviously i would like to get things work with Linux too! I have installed Ubuntu Hoary. Installed also the Bluez framework (first from packages, than from scratch).

That's the output of hciconfig -a

ci0: Type: USB
BD Address: 00:0B:0D:60:B5:F3 ACL MTU: 377:10 SCO MTU: 16:0 UP RUNNING PSCAN ISCAN AUTH ENCRYPT
RX bytes:1390 acl:15 sco:0 events:106 errors:0
TX bytes:1673 acl:16 sco:0 commands:69 errors:0
Features: 0xff 0xfe 0x0d 0x38 0x08 0x08 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'BlueZ (0)'
Class: 0x3e0100
Service Classes: Networking, Rendering, Capturing
Device Class: Computer, Uncategorized
HCI Ver: 1.2 (0x2) HCI Rev: 0x4 LMP Ver: 1.2 (0x2) LMP Subver: 0x309
Manufacturer: Broadcom Corporation (15)

Info for the headset using hcitool

BD Address: 00:0B:2E:31:33:36
Device Name: Motorola HS805
LMP Version: 1.2 (0x2) LMP Subversion: 0x60d
Manufacturer: Cambridge Silicon Radio (10)
Features: 0xff 0xff 0x0b 0x00 0x08 0x08 0x00 0x00
<3-slot packets> <5-slot packets> <encryption> <slot offset> <timing accuracy> <role switch> <hold mode> <sniff mode> <park state> <RSSI> <channel quality> <SCO link> <HV2
packets>
<HV3 packets> <u-law log> <A-law log> <CVSD> <paging scheme> <transparent SCO> <AFH cap. slave> <AFH cap. master>

i built alsa-bluetooth with success. After some work.. the connection worked: this is the output...

root@ubuntu:/susers/andrea/tmp/bluez-utils-2.17/tools# /usr/bin/btsco -v 00:0B:2E:31:33:36
btsco v0.4c
Device is 0:0
Voice setting: 0x0060
RFCOMM channel 1 connected
recieved AT+CKPD=200
speaker volume: 11 mic volume: 1
i/o needed: connecting sco...
connected SCO channel
Done setting sco fd
recieved AT+VGS=11
Sending up speaker change 11
recieved AT+VGS=13
Sending up speaker change 13
recieved AT+VGS=11
Sending up speaker change 11
recieved AT+VGS=09
Sending up speaker change 9
recieved AT+CKPD=200
recieved AT+CKPD=200
recieved AT+VGS=11
Sending up speaker change 11
recieved AT+VGS=13
Sending up speaker change 13
recieved AT+VGS=15
Sending up speaker change 15
recieved AT+CKPD=200

If i press the buttons on my headset, the volume decrease and increase (look at the previous output)...
The problem is that i hear no sound! And mic doesn't work... but if i increase the volume i hear some "clips"... but nothing more... Maybe it's something related with SCO? What does mean RX bytes:1390 acl:15 sco:0 events:106 errors:0

      TX bytes:1673 acl:16 sco:0 commands:69 errors:0 ?

I really appreciate your help!

Cheers,
Andrea

Quoted 9 lines

-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users