how to initramfs
I?m a little confused! What?s the difference between initramfs and initrd?
How can I create a runable initramfs for my linux Kernel?
Where can I found an example for a rootfs (2.6.10)?
Is a initramfs or initrd essential for a linux prompt?
Because at the moment my serial output shows only this:
U-BOOT# bootm 50040000
## Booting image at 50040000 ...
Image Name: NS9750 Kernel Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1074991 Bytes = 1 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
OK
Starting kernel ...
--
View this message in context: http://www.nabble.com/how+to+initramfs-t1667406.html#a4518657
Sent from the Uboot - Users forum at Nabble.com.
Quoted 2 lines · In message <[email protected]> you wrote:
I?m a little confused! What?s the difference between initramfs and initrd?
And what has this to do with U-Boot?
Quoted 1 line
How can I create a runable initramfs for my linux Kernel?
And what has this to do with U-Boot?
Quoted 1 line
Where can I found an example for a rootfs (2.6.10)?
And what has this to do with U-Boot?
Quoted 1 line
Is a initramfs or initrd essential for a linux prompt?
And what has this to do with U-Boot?
Best regards,
Wolfgang Denk
Signature · 4 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Dear Lord: I just want *one* one-armed manager so I never have to hear "On the other hand", again.
Nothing, but I thought someone could give me good advice to this issue.
--
View this message in context: http://www.nabble.com/how+to+initramfs-t1667406.html#a4519495
Sent from the Uboot - Users forum at Nabble.com.