Skip to contentSkip to conversation

MPC8360EMDS lowboot option

PATCH New Jerry Van Baren 3 participants 4 messages Dec 1, 2006

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 MPC8360EMDS lowboot option

Hi Dave Liu,

The following patch adds a configuration to do "low boot" (HRCW.BMS = 0) as well as "high boot" (HRCW.BMS = 1).

Many people, myself included :o) prefer to boot out of low memory. It has an added benefit that, if you screw up the image of of u-boot in low memory, you can switch SW9.3 FCFG and boot using the BCSR, which "high boots" (assuming you smart enough to keep a valid u-boot image at 0xFFF00000).

The patch is against the top of the denx.de repository (thanks, Wolfgang, for pulling the fsl patches).

gvb
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: 0001-Add-a-configuration-option-to-low-boot-boot-memory-space-0x00000000.txt
Url: http://lists.denx.de/pipermail/u-boot/attachments/20061130/00c9ab45/attachment.txt

#1 lore raw

PATCH 1/1 MPC8360EMDS lowboot option

Quoted 10 lines · Jerry Van Baren

Hi Dave Liu,

The following patch adds a configuration to do "low boot" (HRCW.BMS = 0) as well as "high boot" (HRCW.BMS = 1).

Many people, myself included :o) prefer to boot out of low memory. It has an added benefit that, if you screw up the image of of u-boot in low memory, you can switch SW9.3 FCFG and boot using the BCSR, which "high boots" (assuming you smart enough to keep a valid u-boot image at 0xFFF00000).

The 8360EMDS u-boot is booting at low memory in default now. You can change it for high memory.

Quoted 2 lines

The patch is against the top of the denx.de repository (thanks, Wolfgang, for pulling the fsl patches).

Thanks Wolfgang and Stefan for pulling them.

#2 lore raw

PATCH 1/1 MPC8360EMDS lowboot option

Quoted 12 lines · Dave Liu
Quoted 10 lines · Jerry Van Baren

Hi Dave Liu,

The following patch adds a configuration to do "low boot" (HRCW.BMS = 0) as well as "high boot" (HRCW.BMS = 1).

Many people, myself included :o) prefer to boot out of low memory. It has an added benefit that, if you screw up the image of of u-boot in low memory, you can switch SW9.3 FCFG and boot using the BCSR, which "high boots" (assuming you smart enough to keep a valid u-boot image at 0xFFF00000).

Quoted 7 lines

The 8360EMDS u-boot is booting at low memory in default now. You can change it for high memory.

Quoted 2 lines

The patch is against the top of the denx.de repository (thanks, Wolfgang, for pulling the fsl patches).

Thanks Wolfgang and Stefan for pulling them.

Yes, if the board is not configured as a PCI slave. I forgot to ask, is that a hardware restriction or is it OK to "boot low" as a PCI slave (mostly curious)?

In defense of the patch, it is nice to be able to easily configure u-boot to boot high or low. The Makefile configuration trick is really handy and is how several boards handle it.

Thanks,
gvb

#3 lore raw

PATCH 1/1 MPC8360EMDS lowboot option

Quoted 23 lines · Jerry Van Baren
Quoted 22 lines · Dave Liu
Quoted 6 lines · Jerry Van Baren

Hi Dave Liu,

The following patch adds a configuration to do "low boot" (HRCW.BMS = 0)
as well as "high boot" (HRCW.BMS = 1).

Quoted 8 lines

Many people, myself included :o) prefer to boot out of low memory. It
has an added benefit that, if you screw up the image of of u-boot in low
memory, you can switch SW9.3 FCFG and boot using the BCSR, which "high
boots" (assuming you smart enough to keep a valid u-boot image at 0xFFF00000).

The 8360EMDS u-boot is booting at low memory in default now. You can change it for high memory.

Quoted 2 lines

The patch is against the top of the denx.de repository (thanks, Wolfgang, for pulling the fsl patches).

Quoted 6 lines
Quoted 1 line

Thanks Wolfgang and Stefan for pulling them.

Yes, if the board is not configured as a PCI slave. I forgot to ask, is
that a hardware restriction or is it OK to "boot low" as a PCI slave (mostly curious)?

You can boot low as a PCI slave, no HW restriction.

- k