Skip to contentSkip to conversation

PATCH: cyber2010 framebuffer on ARM Netwinder fix...

PATCH Woody Suwalski 2 participants 2 messages Jan 9, 2007 – Jan 20, 2007 5 messages not in the archive Framebuffer layer

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): Pine.LNX.4.64.0701041235351.3796@localhost

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

#5 lore raw
Quoted 12 lines · Martin Michlmayr
Quoted 9 lines · Stuart Anderson

shark w/o any changes to the kernel. I dug a bit further, both in the driver, and in the HW spec for the shark, and discovered that the video chip on the shark is connected via the VL bus, not the PCI bus. The shark does have a VL-PCI bridge, but there doesn't seem to be anything connected to the PCI side of it (which matches what lspci says). The function containing the patch in question doesn't appear to even run on the shark (there is a VL version that is #ifdef SHARK'd), so I'd have to say the patch would have not impact on the shark.

Quoted 3 lines

OK, good news. Thanks for checking. Woody, can you submit the patch (with proper intentation) to [email protected]

As suggested - I am sending this patch to fbdev-devel....

The Netwinder machines with Cyber2010 crash badly when starting Xserver. The workaround is to disable pci burst option for this revision of video chip.

Thanks, Woody

The Netwinder machines with Cyber2010 crash badly when starting Xserver. The workaround is to disable pci burst option for this revision of video chip.

---

drivers/video/cyber2000fb.c +18 -10
@@ -1539,16 +1539,24 @@ static int cyberpro_pci_enable_mmio(stru
 	/*
 	 * Allow the CyberPro to accept PCI burst accesses
 	 */
-	val = cyber2000_grphr(EXT_BUS_CTL, cfb);
-	if (!(val & EXT_BUS_CTL_PCIBURST_WRITE)) {
-		printk(KERN_INFO "%s: enabling PCI bursts\n", cfb->fb.fix.id);
-
-		val |= EXT_BUS_CTL_PCIBURST_WRITE;
-
-		if (cfb->id == ID_CYBERPRO_5000)
-			val |= EXT_BUS_CTL_PCIBURST_READ;
-
-		cyber2000_grphw(EXT_BUS_CTL, val, cfb);
+	if (cfb->id == ID_CYBERPRO_2010)
+	{
+		printk(KERN_INFO "%s: NOT enabling PCI bursts\n", cfb->fb.fix.id);
+	}
+	else
+	{
+		val = cyber2000_grphr(EXT_BUS_CTL, cfb);
+		if (!(val & EXT_BUS_CTL_PCIBURST_WRITE)) {
+			printk(KERN_INFO "%s: enabling PCI bursts\n",
+				cfb->fb.fix.id);
+	
+			val |= EXT_BUS_CTL_PCIBURST_WRITE;
+	
+			if (cfb->id == ID_CYBERPRO_5000)
+				val |= EXT_BUS_CTL_PCIBURST_READ;
+	
+			cyber2000_grphw(EXT_BUS_CTL, val, cfb);
+		}
 	}
 
 	return 0;
#6 lore raw

Just wondering, did the rtc change for the arm get sent up also?

Quoted 17 lines · Woody Suwalski
Quoted 12 lines · Martin Michlmayr
Quoted 9 lines · Stuart Anderson

shark w/o any changes to the kernel. I dug a bit further, both in the driver, and in the HW spec for the shark, and discovered that the video chip on the shark is connected via the VL bus, not the PCI bus. The shark does have a VL-PCI bridge, but there doesn't seem to be anything connected to the PCI side of it (which matches what lspci says). The function containing the patch in question doesn't appear to even run on the shark (there is a VL version that is #ifdef SHARK'd), so I'd have to say the patch would have not impact on the shark.

Quoted 3 lines

OK, good news. Thanks for checking. Woody, can you submit the patch (with proper intentation) to [email protected]

Quoted 8 lines

As suggested - I am sending this patch to fbdev-devel....

The Netwinder machines with Cyber2010 crash badly when starting Xserver. The workaround is to disable pci burst option for this revision of video chip.

Thanks, Woody

Stuart

Stuart R. Anderson                               [email protected]
Network & Software Engineering                   http://www.netsweng.com/
1024D/37A79149:                                  0791 D3B8 9A4C 2CDC A31F
                                                 BD03 0A62 E534 37A7 9149