PATCH: cyber2010 framebuffer on ARM Netwinder fix...
Quoted 12 lines · Martin Michlmayr
Quoted 9 lines · Stuart Anderson
shark w/o any changes to the kernel. I dug a bit further, both in the driver, and in the HW spec for the shark, and discovered that the video chip on the shark is connected via the VL bus, not the PCI bus. The shark does have a VL-PCI bridge, but there doesn't seem to be anything connected to the PCI side of it (which matches what lspci says). The function containing the patch in question doesn't appear to even run on the shark (there is a VL version that is #ifdef SHARK'd), so I'd have to say the patch would have not impact on the shark.
Quoted 3 lines
OK, good news. Thanks for checking. Woody, can you submit the patch (with proper intentation) to [email protected]
As suggested - I am sending this patch to fbdev-devel....
The Netwinder machines with Cyber2010 crash badly when starting Xserver. The workaround is to disable pci burst option for this revision of video chip.
Thanks, Woody
The Netwinder machines with Cyber2010 crash badly when starting Xserver. The workaround is to disable pci burst option for this revision of video chip.
---
drivers/video/cyber2000fb.c +18 -10
@@ -1539,16 +1539,24 @@ static int cyberpro_pci_enable_mmio(stru/* * Allow the CyberPro to accept PCI burst accesses */ - val =cyber2000_grphr (EXT_BUS_CTL , cfb); -if (!(val &EXT_BUS_CTL_PCIBURST_WRITE )) { -printk (KERN_INFO "%s: enabling PCI bursts\n" , cfb->fb.fix.id); - - val |=EXT_BUS_CTL_PCIBURST_WRITE ; - -if (cfb->id ==ID_CYBERPRO_5000 ) - val |=EXT_BUS_CTL_PCIBURST_READ ; - -cyber2000_grphw (EXT_BUS_CTL , val, cfb); +if (cfb->id ==ID_CYBERPRO_2010 ) + { +printk (KERN_INFO "%s: NOT enabling PCI bursts\n" , cfb->fb.fix.id); + } +else + { + val =cyber2000_grphr (EXT_BUS_CTL , cfb); +if (!(val &EXT_BUS_CTL_PCIBURST_WRITE )) { +printk (KERN_INFO "%s: enabling PCI bursts\n" , + cfb->fb.fix.id); + + val |=EXT_BUS_CTL_PCIBURST_WRITE ; + +if (cfb->id ==ID_CYBERPRO_5000 ) + val |=EXT_BUS_CTL_PCIBURST_READ ; + +cyber2000_grphw (EXT_BUS_CTL , val, cfb); + } }return 0 ;
Just wondering, did the rtc change for the arm get sent up also?
Quoted 17 lines · Woody Suwalski
Quoted 12 lines · Martin Michlmayr
Quoted 9 lines · Stuart Anderson
shark w/o any changes to the kernel. I dug a bit further, both in the driver, and in the HW spec for the shark, and discovered that the video chip on the shark is connected via the VL bus, not the PCI bus. The shark does have a VL-PCI bridge, but there doesn't seem to be anything connected to the PCI side of it (which matches what lspci says). The function containing the patch in question doesn't appear to even run on the shark (there is a VL version that is #ifdef SHARK'd), so I'd have to say the patch would have not impact on the shark.
Quoted 3 lines
OK, good news. Thanks for checking. Woody, can you submit the patch (with proper intentation) to [email protected]
Quoted 8 lines
As suggested - I am sending this patch to fbdev-devel....
The Netwinder machines with Cyber2010 crash badly when starting Xserver. The workaround is to disable pci burst option for this revision of video chip.
Thanks, Woody
Stuart
Stuart R. Anderson [email protected] Network & Software Engineering http://www.netsweng.com/ 1024D/37A79149: 0791 D3B8 9A4C 2CDC A31F BD03 0A62 E534 37A7 9149