drbdadm segfaults with incorrect drbd.conf
It seems that when the resources aren't setup exactly right in drbd.conf drbdadm can segfault due to using a pointer that is NULL. Attached is a patch that fixes the issue.
Signature · 6 lines
------------------------------------------------------ Dave Jiang Software Engineer MontaVista Software, Inc. http://www.mvista.com ------------------------------------------------------
user/drbdadm_main.c +4 -1
@@ -1029,6 +1029,7 @@ struct d_resource* res_by_minor(const ch mm =m_strtoll (id+6 ,1 );for_each_resource (res,t,config) { +if ( !res->me )continue ;if ( mm ==dt_minor_of_dev (res->me->device))return res; }return NULL ;
@@ -1818,7 +1819,9 @@ int main(int argc, char** argv) highest_minor=0 ;for_each_resource (res,tmp,config) { -int m =dt_minor_of_dev (res->me->device); +int m; +if ( !res->me )continue ; + m =dt_minor_of_dev (res->me->device);if ( m > highest_minor ) highest_minor = m; nr_resources++; }
Philipp Reisner
maintainerQuoted 3 lines · On Wednesday 20 June 2007 18:34:03 Dave Jiang wrote:
It seems that when the resources aren't setup exactly right in drbd.conf drbdadm can segfault due to using a pointer that is NULL. Attached is a patch that fixes the issue.
Could you provide such an drbd.conf file as well, so that we can see the issue, that gets fixed by the patch ?
Thanks!
-Phil
Signature · 3 lines
: Dipl-Ing Philipp Reisner Tel +43-1-8178292-50 : : LINBIT Information Technologies GmbH Fax +43-1-8178292-82 : : Vivenotgasse 48, 1120 Vienna, Austria http://www.linbit.com :
Philipp Reisner
maintainerQuoted 6 lines · On Wednesday 20 June 2007 20:08:30 Dave Jiang wrote:
Quoted 5 lines · Philipp Reisner
Quoted 3 lines · On Wednesday 20 June 2007 18:34:03 Dave Jiang wrote:
It seems that when the resources aren't setup exactly right in drbd.conf drbdadm can segfault due to using a pointer that is NULL. Attached is a patch that fixes the issue.
Quoted 8 lines
Quoted 6 lines
Could you provide such an drbd.conf file as well, so that we can see the issue, that gets fixed by the patch ?
Thanks!
-Phil
Ah I got one that does it. You can use it as it is.
Hi Dave,
Now I understand what you wanted to fix ;) I did a patch that rejects such config files beforehand.
http://lists.linbit.com/pipermail/drbd-cvs/2007-June/001562.html
-phil
Signature · 3 lines
: Dipl-Ing Philipp Reisner Tel +43-1-8178292-50 : : LINBIT Information Technologies GmbH Fax +43-1-8178292-82 : : Vivenotgasse 48, 1120 Vienna, Austria http://www.linbit.com :
#
# drbd.conf example
#
# parameters you _need_ to change are the hostname, device, disk,
# meta-disk, address and port in the "on <hostname> {}" sections.
#
# you ought to know about the protocol, and the various timeouts.
#
# you probably want to set the rate in the syncer sections#
# NOTE common pitfall:
# rate is given in units of _byte_ not bit #
#
# increase timeout and maybe ping-int in net{}, if you see
# problems with "connection lost/connection established"
# (or change your setup to reduce network latency; make sure full
# duplex behaves as such; check average roundtrip times while
# network is saturated; and so on ...)
#skip {
As you can see, you can also comment chunks of text with a 'skip[optional nonsense]{ skipped text }' section. This comes in handy, if you just want to comment out some 'resource <some name> {...}' section:
just precede it with 'skip'.
The basic format of option assignment is
<option name><linear whitespace><value>;
It should be obvious from the examples below,
but if you really care to know the details:
<option name> :=
valid options in the respective scope
<value> := <num>|<string>|<choice>|...
depending on the set of allowed values for the respective option.
<num> := [0-9]+, sometimes with an optional suffix of K,M,G
<string> := (<name>|\"([^\"\\\n]*|\\.)*\")+
<name> := [/_.A-Za-z0-9-]+
}
#
# At most ONE global section is allowed.
# It must precede any resource section.
#
global {
# By default we load the module with a minor-count of 32. In case you # have more devices in your config, the module gets loaded with # a minor-count that ensures that you have 10 minors spare. # In case 10 spare minors are too little for you, you can set the # minor-count exeplicit here. ( Note, in contrast to DRBD-0.7 an # unused, spare minor has only a very little overhead of allocated # memory (a single pointer to be exact). )
#
# minor-count 64;
# The user dialog counts and displays the seconds it waited so # far. You might want to disable this if you have the console # of your server connected to a serial terminal server with # limited logging capacity.
# The Dialog will print the count each 'dialog-refresh' seconds, # set it to 0 to disable redrawing completely. [ default = 1 ] #
# dialog-refresh 5; # 5 seconds
# You might disable one of drbdadm's sanity check. # disable-ip-verification;
# Participate in DRBD's online usage counter at http://usage.drbd.org
# possilbe options: ask, yes, no. Default is ask. In case you do not # know, set it to ask, and follow the on screen instructions later. usage-count yes;
}
#
# The common section can have all the sections a resource can have but
# not the host section (started with the "on" keyword). # The common section must precede all resources. # All resources inherit the settings from the common section. # Whereas settings in the resources have precedence over the common # setting. #
common {
syncer { rate 10M; }
}
#
# this need not be r#, you may use phony resource names, # like "resource web" or "resource mail", too #
resource r0 {
# transfer protocol to use. # C: write IO is reported as completed, if we know it has # reached _both_ local and remote DISK. # * for critical transactional data. # B: write IO is reported as completed, if it has reached # local DISK and remote buffer cache. # * for most cases. # A: write IO is reported as completed, if it has reached # local DISK and local tcp send buffer. (see also sndbuf-size) # * for high latency networks # #********** # uhm, benchmarks have shown that C is actually better than B. # this note shall disappear, when we are convinced that B is # the right choice "for most cases". # Until then, always use C unless you have a reason not to. # --lge #********** # protocol C;
handlers {
# what should be done in case the node is primary, degraded
# (=no connection) and has inconsistent data.
pri-on-incon-degr "echo o > /proc/sysrq-trigger ; halt -f"; # The node is currently primary, but lost the after split brain # auto recovery procedure. As as consequence it should go away. pri-lost-after-sb "echo o > /proc/sysrq-trigger ; halt -f";
# In case you have set the on-io-error option to "call-local-io-error", # this script will get executed in case of a local IO error. It is # expected that this script will case a immediate failover in the # cluster.
local-io-error "echo o > /proc/sysrq-trigger ; halt -f";
# Commands to run in case we need to downgrade the peer's disk
# state to "Outdated". Should be implemented by the superior
# communication possibilities of our cluster manager.
# The provided script uses ssh, and is for demonstration/development
# purposis.
# outdate-peer "/usr/lib/drbd/outdate-peer.sh on amd 192.168.22.11 192.168.23.11 on alf 192.168.22.12 192.168.23.12"; #
# Update: Now there is a solution that relies on heartbeat's
# communication layers. You should really use this.
outdate-peer "/usr/sbin/drbd-peer-outdater";
}
startup {
# Wait for connection timeout.
# The init script blocks the boot process until the resources
# are connected. This is so when the cluster manager starts later,
# it does not see a resource with internal split-brain.
# In case you want to limit the wait time, do it here.
# Default is 0, which means unlimited. Unit is seconds.
#
# wfc-timeout 0; # Wait for connection timeout if this node was a degraded cluster. # In case a degraded cluster (= cluster with only one node left) # is rebooted, this timeout value is used.
#
degr-wfc-timeout 120; # 2 minutes.
}
disk {
# if the lower level device reports io-error you have the choice of
# "pass_on" -> Report the io-error to the upper layers.
# Primary -> report it to the mounted file system.
# Secondary -> ignore it.
# "call-local-io-error"
# -> Call the script configured by the name "local-io-error".
# "detach" -> The node drops its backing storage device, and
# continues in disk less mode.
#
on-io-error detach;
# Controls the fencing policy, default is "dont-care". Before you
# set any policy you need to make sure that you have a working
# outdate-peer handler. Possible values are:
# "dont-care" -> Never call the outdate-peer handler. [ DEFAULT ]
# "resource-only" -> Call the outdate-peer handler if we primary and
# loose the connection to the secondary. As well
# whenn a unconnected secondary wants to become
# primary.
# "resource-and-stonith"
# -> Calls the outdate-peer handler and freezes local
# IO immediately after loss of connection. This is
# necessary if your heartbeat can STONITH the other
# node.
# fencing resource-only;
# In case you only want to use a fraction of the available space
# you might use the "size" option here.
#
# size 10G;}
net {
# this is the size of the tcp socket send buffer
# increase it _carefully_ if you want to use protocol A over a
# high latency network with reasonable write throughput.
# defaults to 2*65535; you might try even 1M, but if your kernel or
# network driver chokes on that, you have been warned.
# sndbuf-size 512k; # timeout 60; # 6 seconds (unit = 0.1 seconds)
# connect-int 10; # 10 seconds (unit = 1 second)
# ping-int 10; # 10 seconds (unit = 1 second)
# ping-timeout 5; # 500 ms (unit = 0.1 seconds) # Maximal number of requests (4K) to be allocated by DRBD. # The minimum is hardcoded to 32 (=128 kByte).
# For high performance installations it might help if you # increase that number. These buffers are used to hold # datablocks while they are written to disk.
#
# max-buffers 2048;
# When the number of outstanding requests on a standby (secondary) # node exceeds bdev-threshold, we start to kick the backing device # to start its request processing. This is an advanced tuning # parameter to get more performance out of capable storage controlers. # Some controlers like to be kicked often, other controlers # deliver better performance when they are kicked less frequently. # Set it to the value of max-buffers to get the least possible # number of run_task_queue_disk() / q->unplug_fn(q) calls. #
# unplug-watermark 128;
# The highest number of data blocks between two write barriers. # If you set this < 10 you might decrease your performance. # max-epoch-size 2048;
# if some block send times out this many times, the peer is # considered dead, even if it still answers ping requests. # ko-count 4;
# If you want to use OCFS2/openGFS on top of DRBD enable # this optione, and only enable it if you are going to use # one of these filesystems. Do not enable it for ext2, # ext3,reiserFS,XFS,JFS etc...
# allow-two-primaries;
# This enables peer authentication. Without this everybody # on the network could connect to one of your DRBD nodes with # a program that emulates DRBD's protocoll and could suck off # all your data.
# Specify one of the kernel's digest algorithms, e.g.:
# md5, sha1, sha256, sha512, wp256, wp384, wp512, michael_mic ... # an a shared secret.
# Authentication is only done once after the TCP connection # is establised, there are no disadvantages from using authentication, # therefore I suggest to enable it in any case.
# cram-hmac-alg "sha1";
# shared-secret "FooFunFactory";
# In case the nodes of your cluster nodes see each other again, after # an split brain situation in which both nodes where primary # at the same time, you have two diverged versions of your data. #
# In case both nodes are secondary you can control DRBD's # auto recovery strategy by the "after-sb-0pri" options. The # default is to disconnect.
# "disconnect" ... No automatic resynchronisation, simply disconnect.
# "discard-younger-primary"
# Auto sync from the node that was primary before
# the split brain situation happened.
# "discard-older-primary"
# Auto sync from the node that became primary
# as second during the split brain situation.
# "discard-least-changes"
# Auto sync from the node that touched more
# blocks during the split brain situation.
# "discard-node-NODENAME"
# Auto sync _to_ the named node.
after-sb-0pri disconnect;
# In one of the nodes is already primary, then the auto-recovery # strategie is controled by the "after-sb-1pri" options.
# "disconnect" ... always disconnect
# "consensus" ... discard the version of the secondary if the outcome
# of the "after-sb-0pri" algorithm would also destroy
# the current secondary's data. Otherwise disconnect.
# "violently-as0p" Always take the decission of the "after-sb-0pri"
# algorithm. Even if that causes case an erratic change
# of the primarie's view of the data.
# This is only usefull if you use an 1node FS (i.e.
# not OCFS2 or GFS) with the allow-two-primaries
# flag, _AND_ you really know what you are doing.
# This is DANGEROUS and MAY CRASH YOUR MACHINE if you
# have a FS mounted on the primary node.
# "discard-secondary"
# discard the version of the secondary.
# "call-pri-lost-after-sb" Always honour the outcome of the "after-sb-0pri"
# algorithm. In case it decides the the current
# secondary has the right data, it panics the
# current primary.
# "suspend-primary" ???
after-sb-1pri disconnect;
# In case both nodes are primary you control DRBD's strategy by # the "after-sb-2pri" option.
# "disconnect" ... Go to StandAlone mode on both sides.
# "violently-as0p" Always take the decission of the "after-sb-0pri".
# "call-pri-lost-after-sb" ... Honor the outcome of the "after-sb-0pri"
# algorithm and panic the other node.
after-sb-2pri disconnect;
# To solve the cases when the outcome of the resync descissions is # incompatible to the current role asignment in the cluster.
# "disconnect" ... No automatic resynchronisation, simply disconnect.
# "violently" .... Sync to the primary node is allowed, violating the
# assumption that data on a block device is stable
# for one of the nodes. DANGEROUS, DO NOT USE.
# "call-pri-lost" Call the "pri-lost" helper program on one of the
# machines. This program is expected to reboot the
# machine. (I.e. make it secondary.)
rr-conflict disconnect;
# DRBD-0.7's behaviour is equivalent to
# after-sb-0pri discard-younger-primary;
# after-sb-1pri consensus;
# after-sb-2pri disconnect;
}
syncer {
# Limit the bandwith used by the resynchronisation process.
# default unit is kByte/sec; optional suffixes K,M,G are allowed.
#
# Even though this is a network setting, the units are based
# on _byte_ (octet for our french friends) not bit.
# We are storage guys.
#
# Note that on 100Mbit ethernet, you cannot expect more than
# 12.5 MByte total transfer rate.
# Consider using GigaBit Ethernet.
#
rate 10M; # Normally all devices are resynchronized parallel.
# To achieve better resynchronisation performance you should resync # DRBD resources which have their backing storage on one physical # disk sequentially. The express this use the "after" keyword. after "r2";
# Configures the size of the active set. Each extent is 4M, # 257 Extents ~> 1GB active set size. In case your syncer # runs @ 10MB/sec, all resync after a primary's crash will last # 1GB / ( 10MB/sec ) ~ 102 seconds ~ One Minute and 42 Seconds. # BTW, the hash algorithm works best if the number of al-extents # is prime. (To test the worst case performace use a power of 2) al-extents 257;
}
on TARGET1 {
device /dev/drbd0;
disk /dev/sda2;
address 10.40.20.47:7788;
flexible-meta-disk internal;# on amd {
# device /dev/drbd0; # disk /dev/hde5; # address 192.168.22.11:7788; # flexible-meta-disk internal;
# meta-disk is either 'internal' or '/dev/ice/name [idx]'
#
# You can use a single block device to store meta-data
# of multiple DRBD's.
# E.g. use meta-disk /dev/hde6[0]; and meta-disk /dev/hde6[1];
# for two different resources. In this case the meta-disk
# would need to be at least 256 MB in size.
#
# 'internal' means, that the last 128 MB of the lower device
# are used to store the meta-data.
# You must not give an index with 'internal'.
}# on alf {
# device /dev/drbd0; # disk /dev/hdc5; # address 192.168.22.12:7788; # meta-disk internal;
# }
}
#
# yes, you may also quote the resource name.
# but don't include whitespace, unless you mean it :)
#
#resource "r1" {
# protocol C;
# startup {
# wfc-timeout 0; ## Infinite!
# degr-wfc-timeout 120; ## 2 minutes.
# }
# disk {
# on-io-error detach;
# }
# net {
# # timeout 60;
# # connect-int 10;
# # ping-int 10;
# # max-buffers 2048;
# # max-epoch-size 2048;
# }
# syncer {
# }# on amd {
# device /dev/drbd1; # disk /dev/hde6; # address 192.168.22.11:7789; # meta-disk /dev/somewhere [7];
# }
# on alf {
# device /dev/drbd1; # disk /dev/hdc6; # address 192.168.22.12:7789; # meta-disk /dev/somewhere [7];
# }
#}
#resource r2 {
# protocol C;
#
# startup { wfc-timeout 0; degr-wfc-timeout 120; }
# disk { on-io-error detach; }
# net { timeout 60; connect-int 10; ping-int 10;# max-buffers 2048; max-epoch-size 2048; }
# syncer { rate 4M; } # sync when r0 and r1 are finished syncing. # on amd {
# address 192.168.22.11:7790;
# disk /dev/hde7; device /dev/drbd2; meta-disk "internal";
# }
# on alf {
# device "/dev/drbd2"; disk "/dev/hdc7"; meta-disk "internal";
# address 192.168.22.12:7790;
# }
#}
#
#resource r3 {
# protocol C;
#
# startup { wfc-timeout 0; degr-wfc-timeout 120; }
# disk { on-io-error detach; }
# syncer {
# }
# on amd {
# device /dev/drbd3;
# disk /dev/hde8;
# address 192.168.22.11:7791;
# meta-disk internal;
# }
# on alf {
# device /dev/drbd3;
# disk /dev/hdc8;
# address 192.168.22.12:7791;
# meta-disk /some/where[8];# }
#}