powerpc: DBox2 Board Support

new file mode 100644
index 0000000..8d91510
@@ -0,0 +1,263 @@
+/*
+ * DBOX2 Device Tree Source
+ *
+ * Copyright 2007 Jochen Friedrich <[email protected]>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/ {
+	model = "Dbox2";
+	compatible = "betaresearch,dbox2";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,823@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <d#16>;
+			i-cache-line-size = <d#16>;
+			d-cache-size = <d#1024>;
+			i-cache-size = <d#2048>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			interrupts = <f 2>;	// decrementer interrupt
+			interrupt-parent = <&PIC>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 2000000>;
+	};
+
+	localbus@8000000 {
+		compatible = "betaresearch,dbox2-localbus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <8000000 18000000>;
+
+		ranges = <0 8000000 18000000>;
+
+		enx@0 {
+			compatible = "c-cube,enx";
+			reg = <0 3400 1000000 200000>;
+			interrupts = <2 2>;
+			interrupt-parent = <&PIC>;
+		};
+
+		gtx@0 {
+			compatible = "c-cube,gtx";
+			reg = <400000 3000 0 200000>;
+			interrupts = <2 2>;
+			interrupt-parent = <&PIC>;
+		};
+
+		fp@0 {
+			compatible = "betaresearch,dbox2-fp";
+			interrupts = <4 2>;
+			interrupt-parent = <&PIC>;
+			gpios = <0 e>;
+			gpio-parent = <&CPM1_PIO>;
+		};
+
+		fe@0 {
+			compatible = "betaresearch,dbox2-fe";
+			interrupts = <e 2>;
+			interrupt-parent = <&PIC>;
+		};
+
+		avia@2000000 {
+			compatible = "c-cube,avia";
+			reg = <2000000 200>;
+			interrupts = <8 2>;
+			interrupt-parent = <&PIC>;
+		};
+		cam@4000000 {
+			compatible = "betaresearch,dbox2-cam";
+			reg = <4000000 20000>;
+			interrupts = <6 2>;
+			interrupt-parent = <&PIC>;
+			gpios = <1 1c 1 1d 1 1e 1 1f>;
+			gpio-parent = <&CPM1_PIO>;
+		};
+
+		cam@4040000 {
+			compatible = "betaresearch,dbox2-cam";
+			reg = <4040000 20000>;
+			interrupts = <6 2>;
+			interrupt-parent = <&PIC>;
+			gpios = <1 1c 1 1d 1 1e 1 1f>;
+			gpio-parent = <&CPM1_PIO>;
+		};
+
+		flash@8000000 {
+			// Flash also has info about model needed by setup
+			compatible = "cfi-flash",
+				     "betaresearch,dbox2-config";
+			reg = <8000000 800000>;
+			bank-width = <4>;
+			device-width = <1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "BR bootloader";
+				reg = <0 20000>;
+				read-only;
+			};
+			partition@20000 {
+				label = "FLFS (U-Boot)";
+				reg = <20000 20000>;
+			};
+			partition@40000 {
+				label = "rootfs";
+				reg = <40000 7c0000>;
+			};
+			ovpartition@20000 {
+				label = "Flash without bootloader";
+				reg = <20000 7e0000>;
+			};
+			ovpartition@0 {
+				label = "Complete Flash";
+				reg = <0 800000>;
+				read-only;
+			};
+		};
+	};
+
+	soc@ff000000 {
+		compatible = "fsl,mpc823",
+			     "fsl,pq1-soc";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0 ff000000 00004000>;
+		reg = <ff000000 00004000>;
+		bus-frequency = <0>;
+
+		PIC: pic@0 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0 24>;
+			compatible = "fsl,mpc823-pic",
+				     "fsl,pq1-pic";
+		};
+
+		wdt@0 {
+			device_type = "watchdog";
+			compatible = "fsl,mpc823-wdt",
+				     "fsl,pq1-wdt";
+			reg = <0 10>;
+		};
+
+		cpm@9c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			reg = <9c0 40>;
+			command-proc = <9c0>;
+			interrupts = <0 2>;	// cpm error interrupt
+			interrupt-parent = <&CPM_PIC>;
+			compatible = "fsl,mpc823-cpm",
+				     "fsl,cpm1";
+
+			muram@2000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 2000 2000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0 1c00>;
+				};
+			};
+
+			// Port D is LCD exclusive. Don't export as GPIO
+			CPM1_PIO: pio@970 {
+				compatible = "fsl,cpm1-pario";
+				reg = <970 180>;
+				num-ports = <3>;
+				#gpio-cells = <2>;
+			};
+
+			lcd@970 {
+				reg = <970 10>;
+				compatible = "samsung,ks0713";
+			};
+
+			brg@9f0 {
+				compatible = "fsl,mpc823-brg",
+					     "fsl,cpm1-brg",
+					     "fsl,cpm-brg";
+				reg = <9f0 10>;
+			};
+
+			CPM_PIC: pic@930 {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				interrupts = <5 2 0 2>;
+				interrupt-parent = <&PIC>;
+				reg = <930 20>;
+				compatible = "fsl,mpc823-cpm-pic",
+					     "fsl,cpm1-pic";
+			};
+
+			serial@a80 {
+				device_type = "serial";
+				compatible = "fsl,mpc823-smc-uart",
+					     "fsl,cpm1-smc-uart";
+				reg = <a80 10 3e80 40>;
+				interrupts = <4 3>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-brg = <1>;
+				fsl,cpm-command = <0090>;
+			};
+
+			serial@a90 {
+				device_type = "serial";
+				compatible = "fsl,mpc823-smc-uart",
+					     "fsl,cpm1-smc-uart";
+				reg = <a90 10 3f80 40>;
+				interrupts = <3 3>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-brg = <2>;
+				fsl,cpm-command = <00d0>;
+			};
+
+			ethernet@a00 {
+				device_type = "network";
+				compatible = "fsl,mpc823-scc-enet",
+					     "fsl,cpm1-scc-enet";
+				reg = <a20 20 3d00 80>;
+				interrupts = <1d 3>;
+				interrupt-parent = <&CPM_PIC>;
+				fixed-link = <1 0 d#10>;
+				fsl,cpm-command = <0040>;
+				linux,network-index = <0>;
+			};
+
+			i2c@860 {
+				compatible = "fsl,mpc823-i2c",
+					     "fsl,cpm1-i2c",
+					     "fsl,cpm-i2c";
+				reg = <860 20 3c80 30>;
+				interrupts = <10 3>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-command = <0010>;
+			};
+		};
+	};
+	chosen {
+		linux,stdout-path = "/soc/cpm/serial@a80";
+	};
+};

1,042 lines not on this page · raw message

index bd28655..bcd3c40 100644
@@ -43,6 +43,13 @@ config PPC_EP88XC

index 8b70980..306df8a 100644
@@ -5,3 +5,4 @@ obj-$(CONFIG_PPC_8xx)	  += m8xx_setup.o