Rename commproc to cpm1 and cpm2_common.c to cpm2.c
PATCH 7/7 Rename commproc to cpm1 and cpm2_common.c to cpm2.c
Rename commproc.[ch] to cpm1.[ch] to be more consistent with cpm2. Also rename cpm2_common.c to cpm2.c as suggested by Scott Wood. Adjust the includes accordingly.
---
arch/powerpc/platforms/8xx/ep88xc.c | 2 +- arch/powerpc/platforms/8xx/mpc86xads_setup.c | 2 +- arch/powerpc/platforms/8xx/mpc885ads_setup.c | 2 +- arch/powerpc/sysdev/Makefile | 4 +- arch/powerpc/sysdev/commproc.c | 612 --------------------- arch/powerpc/sysdev/cpm1.c | 612 +++++++++++++++++++++ arch/powerpc/sysdev/cpm2.c | 469 ++++++++++++++++ arch/powerpc/sysdev/cpm2_common.c | 470 ---------------- arch/powerpc/sysdev/micropatch.c | 2 +- arch/ppc/8260_io/enet.c | 2 +- arch/ppc/8xx_io/commproc.c | 2 +- arch/ppc/8xx_io/enet.c | 6 +- arch/ppc/8xx_io/fec.c | 2 +- arch/ppc/8xx_io/micropatch.c | 2 +- arch/ppc/boot/simple/iic.c | 2 +- arch/ppc/boot/simple/m8xx_tty.c | 2 +- arch/ppc/kernel/ppc_ksyms.c | 2 +- arch/ppc/platforms/mpc866ads_setup.c | 2 +- arch/ppc/platforms/mpc885ads_setup.c | 2 +- arch/ppc/syslib/mpc8xx_devices.c | 2 +- arch/ppc/xmon/start_8xx.c | 2 +- drivers/net/fec.c | 2 +- drivers/net/fec.h | 2 +- drivers/net/fec_8xx/fec_8xx-netta.c | 2 +- drivers/net/fec_8xx/fec_main.c | 2 +- drivers/net/fec_8xx/fec_mii.c | 2 +- drivers/net/fs_enet/fs_enet.h | 2 +- drivers/net/fs_enet/mac-fec.c | 2 +- drivers/net/fs_enet/mac-scc.c | 2 +- drivers/serial/68360serial.c | 2 +- drivers/serial/cpm_uart/cpm_uart_cpm1.h | 2 +- include/asm-powerpc/commproc.h | 750 -------------------------- include/asm-powerpc/cpm1.h | 750 ++++++++++++++++++++++++++ include/asm-ppc/commproc.h | 688 ----------------------- include/asm-ppc/cpm1.h | 688 +++++++++++++++++++++++ 35 files changed, 2549 insertions(+), 2550 deletions(-)
delete mode 100644 arch/powerpc/sysdev/commproc.c create mode 100644 arch/powerpc/sysdev/cpm1.c create mode 100644 arch/powerpc/sysdev/cpm2.c delete mode 100644 arch/powerpc/sysdev/cpm2_common.c delete mode 100644 include/asm-powerpc/commproc.h create mode 100644 include/asm-powerpc/cpm1.h delete mode 100644 include/asm-ppc/commproc.h create mode 100644 include/asm-ppc/cpm1.h
arch/powerpc/platforms/8xx/ep88xc.c +0 -0
@@ -15,7 +15,7 @@
#include <asm/machdep.h>
#include <asm/io.h>
#include <asm/udbg.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
#include <asm/mpc8xx.h>
struct cpm_pin {
arch/powerpc/platforms/8xx/mpc86xads_setup.c +0 -0
@@ -23,7 +23,7 @@
#include <asm/time.h>
#include <asm/mpc8xx.h>
#include <asm/8xx_immap.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
#include <asm/fs_pd.h>
#include <asm/udbg.h>
arch/powerpc/platforms/8xx/mpc885ads_setup.c +0 -0
@@ -36,7 +36,7 @@
#include <asm/time.h>
#include <asm/mpc8xx.h>
#include <asm/8xx_immap.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
#include <asm/fs_pd.h>
#include <asm/udbg.h>
arch/powerpc/sysdev/Makefile +0 -0
@@ -35,8 +35,8 @@ endif
# Temporary hack until we have migrated to asm-powerpc ifeq ($(ARCH),powerpc)
obj-$(CONFIG_CPM) += cpm_common.o
-obj-$(CONFIG_CPM2) += cpm2_common.o cpm2_pic.o
+obj-$(CONFIG_CPM2) += cpm2.o cpm2_pic.o
obj-$(CONFIG_PPC_DCR) += dcr.o
-obj-$(CONFIG_8xx) += mpc8xx_pic.o commproc.o
+obj-$(CONFIG_8xx) += mpc8xx_pic.o cpm1.o
obj-$(CONFIG_UCODE_PATCH) += micropatch.o
endif
arch/powerpc/sysdev/commproc.c deleted +0 -612
612 lines not on this page · raw message
arch/powerpc/sysdev/cpm1.c new file +612 -0
612 lines not on this page · raw message
arch/powerpc/sysdev/cpm2.c new file +469 -0
469 lines not on this page · raw message
arch/powerpc/sysdev/cpm2_common.c deleted +0 -470
470 lines not on this page · raw message
arch/powerpc/sysdev/micropatch.c +0 -0
@@ -16,7 +16,7 @@
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/8xx_immap.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
/*
* I2C/SPI relocation patch arrays.
arch/ppc/8260_io/enet.c +1 -1
@@ -10,7 +10,7 @@* This version of the driver is somewhat selectable for the different * processor/board combinations. It works for the boards I know about * now, and should be easily modified to include others. Some of the -* configuration information is contained in <asm/commproc.h> and the +* configuration information is contained in <asm/cpm1.h> and the * remainder is here. * * Buffer descriptors are kept in the CPM dual port RAM, and the frame
arch/ppc/8xx_io/commproc.c +0 -0
@@ -34,7 +34,7 @@
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/8xx_immap.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
#include <asm/io.h>
#include <asm/tlbflush.h>
#include <asm/rheap.h>
arch/ppc/8xx_io/enet.c +1 -1
@@ -8,7 +8,7 @@* This version of the driver is somewhat selectable for the different * processor/board combinations. It works for the boards I know about * now, and should be easily modified to include others. Some of the -* configuration information is contained in <asm/commproc.h> and the +* configuration information is contained in <asm/cpm1.h> and the * remainder is here. * * Buffer descriptors are kept in the CPM dual port RAM, and the frame
@@ -43,7 +43,7 @@
#include <asm/pgtable.h>
#include <asm/mpc8xx.h>
#include <asm/uaccess.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
#include <asm/cacheflush.h>
/*
@@ -80,7 +80,7 @@
* programming documents for details unique to your board.
*
* For the TQM8xx(L) modules, there is no control register interface.
- * All functions are directly controlled using I/O pins. See <asm/commproc.h>.
+ * All functions are directly controlled using I/O pins. See <asm/cpm1.h>. */
/* The transmitter timeout
arch/ppc/8xx_io/fec.c +0 -0
@@ -53,7 +53,7 @@
#include <asm/mpc8xx.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
#ifdef CONFIG_USE_MDIO
/* Forward declarations of some structures to support different PHYs
arch/ppc/8xx_io/micropatch.c +0 -0
@@ -16,7 +16,7 @@
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/8xx_immap.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
/*
* I2C/SPI relocation patch arrays.
arch/ppc/boot/simple/iic.c +0 -0
@@ -5,7 +5,7 @@
#include <linux/types.h>
#include <asm/uaccess.h>
#include <asm/mpc8xx.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
/* IIC functions.
arch/ppc/boot/simple/m8xx_tty.c +0 -0
@@ -11,7 +11,7 @@
#include <linux/types.h>
#include <asm/uaccess.h>
#include <asm/mpc8xx.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
#ifdef CONFIG_MBX
#define MBX_CSR1 ((volatile u_char *)0xfa100000)
arch/ppc/kernel/ppc_ksyms.c +0 -0
@@ -45,7 +45,7 @@
#include <asm/dcr.h>
#ifdef CONFIG_8xx
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
#endif
extern void transfer_to_handler(void);
arch/ppc/platforms/mpc866ads_setup.c +0 -0
@@ -32,7 +32,7 @@
#include <asm/time.h>
#include <asm/ppcboot.h>
#include <asm/8xx_immap.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
#include <asm/ppc_sys.h>
#include <asm/mpc8xx.h>
arch/ppc/platforms/mpc885ads_setup.c +0 -0
@@ -31,7 +31,7 @@
#include <asm/time.h>
#include <asm/ppcboot.h>
#include <asm/8xx_immap.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
#include <asm/ppc_sys.h>
extern unsigned char __res[];
arch/ppc/syslib/mpc8xx_devices.c +0 -0
@@ -16,7 +16,7 @@
#include <linux/device.h>
#include <linux/serial_8250.h>
#include <linux/mii.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
#include <asm/mpc8xx.h>
#include <asm/irq.h>
#include <asm/ppc_sys.h>
arch/ppc/xmon/start_8xx.c +0 -0
@@ -14,7 +14,7 @@
#include <linux/kernel.h>
#include <asm/8xx_immap.h>
#include <asm/mpc8xx.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
extern void xmon_printf(const char *fmt, ...);
extern int xmon_8xx_write(char *str, int nb);
drivers/net/fec.c +0 -0
@@ -58,7 +58,7 @@
#else
#include <asm/8xx_immap.h>
#include <asm/mpc8xx.h>
-#include "commproc.h"
+#include "cpm1.h"
#endif
#if defined(CONFIG_FEC2)
drivers/net/fec.h +0 -0
@@ -111,7 +111,7 @@ typedef struct bufdesc {
/*
- * The following definitions courtesy of commproc.h, which where
+ * The following definitions courtesy of cpm1.h, which where
* Copyright (c) 1997 Dan Malek ([email protected]).
*/
#define BD_SC_EMPTY ((ushort)0x8000) /* Recieve is empty */
drivers/net/fec_8xx/fec_8xx-netta.c +0 -0
@@ -26,7 +26,7 @@
#include <asm/mpc8xx.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
#include "fec_8xx.h"
drivers/net/fec_8xx/fec_main.c +0 -0
@@ -35,7 +35,7 @@
#include <asm/mpc8xx.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
#include "fec_8xx.h"
drivers/net/fec_8xx/fec_mii.c +0 -0
@@ -34,7 +34,7 @@
#include <asm/mpc8xx.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
/*************************************************/
drivers/net/fs_enet/fs_enet.h +0 -0
@@ -12,7 +12,7 @@
#include <asm/fs_pd.h>
#ifdef CONFIG_CPM1
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
struct fec_info {
fec_t __iomem *fecp;drivers/net/fs_enet/mac-fec.c +0 -0
@@ -40,7 +40,7 @@
#include <asm/8xx_immap.h>
#include <asm/pgtable.h>
#include <asm/mpc8xx.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
#endif
#ifdef CONFIG_PPC_CPM_NEW_BINDING
drivers/net/fs_enet/mac-scc.c +0 -0
@@ -39,7 +39,7 @@
#ifdef CONFIG_8xx
#include <asm/8xx_immap.h>
#include <asm/pgtable.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
#endif
#ifdef CONFIG_PPC_CPM_NEW_BINDING
drivers/serial/68360serial.c +0 -0
@@ -39,7 +39,7 @@
#include <linux/delay.h>
#include <asm/irq.h>
#include <asm/m68360.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
#ifdef CONFIG_KGDB
drivers/serial/cpm_uart/cpm_uart_cpm1.h +0 -0
@@ -10,7 +10,7 @@
#ifndef CPM_UART_CPM1_H
#define CPM_UART_CPM1_H
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
/* defines for IRQs */
#ifndef CONFIG_PPC_CPM_NEW_BINDING
include/asm-powerpc/commproc.h deleted +0 -750
750 lines not on this page · raw message
include/asm-powerpc/cpm1.h new file +750 -0
69 lines not on this page · raw message
include/asm-ppc/commproc.h deleted +0 -688
688 lines not on this page · raw message
include/asm-ppc/cpm1.h new file +688 -0
688 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
1.5.3.8
Part of the diff is not shown here. View the raw message.