Skip to contentSkip to conversation

Linux issues on Xilinx XUPV2P board

DISCUSSION Alan Casey 4 participants 12 messages Jul 3, 2008 – Aug 31, 2008

lore
Share & tools
lore

Alan Casey

author
#0 lore raw

Hi,

I have tried running the Linux 2.6.24 and Linux 2.6.26 kernels from git.xilinx.com on the Xilinx XUPV2P board but have run into a few probl=
ems.

Cross-compiler i use to compile applications was built using Crosstools=

and
based on gcc 3.3.4. I use Xilinx EDK 7.1 for integrating hardware perip=
herals
onto the board.

The problems i've seen are:

(i) gettimeofday software function returns time of 0 all the time.

(ii) The Linux 2.6.24 kernel's Xilinx Framebuffer driver and/or the Xil=
inx

PLB TFT Controller IP block (plb_tft_cntlr_ref_v1_00_d) does not a=
ppear

to centre the display on a VGA screen properly(vertically offset).=

(iii) 64-bit write/read access to peripheral integrated onto the Xilinx=

Virtex-II Pro FPGA either causes a system crash or only lower par=
t

of 32-bit data to be written (i.e. lower part of 64-bit data appe=
ars
to be mirrored on the upper and lower 32-bits of the system bus).=

However, 32-bit write/read access to the peripheral passes as wel=
l
as 64-bit write/read access to the SDRAM memory address space. Peripheral interface has been verified to be IBM PLB compliant via IBM bus functional model simulations.

(iv) The Linux 2.6.26 Xilinx Framebuffer driver on the Xilinx XUPV2P b=
oard

does not appear to be working - nothing displayed to screen/conso=
le

not switching to framebuffer device on bootup.

Just wondering if anybody has seen these issues before and know how to=

resolve them?

Any info. appreciated,
Regards,
Alan.

#1 lore raw

I meet the problem as yours . And my vga's display is not clear , have you meet this?

Quoted 61 lines · Alan Casey

Hi,

I have tried running the Linux 2.6.24 and Linux 2.6.26 kernels from git.xilinx.com on the Xilinx XUPV2P board but have run into a few
problems.

Cross-compiler i use to compile applications was built using Crosstools
and
based on gcc 3.3.4. I use Xilinx EDK 7.1 for integrating hardware
peripherals
onto the board.

The problems i've seen are:

(i) gettimeofday software function returns time of 0 all the time.

(ii) The Linux 2.6.24 kernel's Xilinx Framebuffer driver and/or the
Xilinx

PLB TFT Controller IP block (plb_tft_cntlr_ref_v1_00_d) does not
appear

to centre the display on a VGA screen properly(vertically offset).

(iii) 64-bit write/read access to peripheral integrated onto the Xilinx

Virtex-II Pro FPGA either causes a system crash or only lower part

of 32-bit data to be written (i.e. lower part of 64-bit data
appears
to be mirrored on the upper and lower 32-bits of the system bus). However, 32-bit write/read access to the peripheral passes as well as 64-bit write/read access to the SDRAM memory address space. Peripheral interface has been verified to be IBM PLB compliant via IBM bus functional model simulations.

(iv) The Linux 2.6.26 Xilinx Framebuffer driver on the Xilinx XUPV2P
board

does not appear to be working - nothing displayed to
screen/console

not switching to framebuffer device on bootup.

Just wondering if anybody has seen these issues before and know how to resolve them?

Any info. appreciated,
Regards,
Alan.

_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

Signature · 2 lines
View this message in context: http://www.nabble.com/Linux-issues-on-Xilinx-XUPV2P-board-tp18262250p18995644.html
Sent from the linuxppc-embedded mailing list archive at Nabble.com.
author
#2 lore raw

Hi,

Yes i had a problem with using one of the Linux 2.6.26 kernel versions on the XUPV2P board where the VGA display has not driven correctly, not sure why. The Linux 2.6.24 kernel from git.xilinx.com works fine.

Regards,
Alan.

Quoted 9 lines

-- Original Message --
Date: Fri, 15 Aug 2008 01:43:37 -0700 (PDT)
From: wangyanlong <[email protected]>
To: [email protected]
Subject: Re: Linux issues on Xilinx XUPV2P board

I meet the problem as yours . And my vga's display is not clear , have

you

Quoted 13 lines

meet this?

Quoted 10 lines · Alan Casey

Hi,

I have tried running the Linux 2.6.24 and Linux 2.6.26 kernels from

git.xilinx.com on the Xilinx XUPV2P board but have run into a few
problems.

Cross-compiler i use to compile applications was built using Crossto=

ols

Quoted 5 lines
Quoted 5 lines

and
based on gcc 3.3.4. I use Xilinx EDK 7.1 for integrating hardware
peripherals
onto the board.

Quoted 8 lines
Quoted 8 lines

The problems i've seen are:

(i) gettimeofday software function returns time of 0 all the time.

(ii) The Linux 2.6.24 kernel's Xilinx Framebuffer driver and/or the
Xilinx

PLB TFT Controller IP block (plb_tft_cntlr_ref_v1_00_d) does no=

t

Quoted 3 lines
Quoted 3 lines

appear

to centre the display on a VGA screen properly(vertically offse=

t).

Quoted 2 lines
Quoted 2 lines

(iii) 64-bit write/read access to peripheral integrated onto the Xil=

inx

Quoted 2 lines
Quoted 2 lines

Virtex-II Pro FPGA either causes a system crash or only lower

part

Quoted 4 lines
Quoted 4 lines

of 32-bit data to be written (i.e. lower part of 64-bit data
appears
to be mirrored on the upper and lower 32-bits of the system bu=

s).

Quoted 1 line
Quoted 1 line

However, 32-bit write/read access to the peripheral passes as

well

Quoted 8 lines
Quoted 8 lines

as 64-bit write/read access to the SDRAM memory address space.=

Peripheral interface has been verified to be IBM PLB compliant=

via IBM bus functional model simulations.

(iv) The Linux 2.6.26 Xilinx Framebuffer driver on the Xilinx XUPV2=

P

Quoted 19 lines
Quoted 8 lines

board

does not appear to be working - nothing displayed to
screen/console

not switching to framebuffer device on bootup.

Just wondering if anybody has seen these issues before and know how=

to

Quoted 9 lines

resolve them?

Any info. appreciated,
Regards,
Alan.

Quoted 9 lines
Quoted 6 lines

_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

Signature · 1 line
View this message in context: http://www.nabble.com/Linux-issues-on-Xili=

nx-XUPV2P-board-tp18262250p18995644.html

Quoted 6 lines

Sent from the linuxppc-embedded mailing list archive at Nabble.com.

_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

#3 lore raw

Hi Alan
I dow load the kernel from "
http://git.xilinx.com/cgi-bin/gitweb.cgi?p=linux-2.6-xlnx.git;a=summary "

Merge ../../linux-2.6 into 2.6.26-merge master commit | commitdiff | tree | snapshot

this version ,but it not work well,which version you downloaded?

Many thanks
yanlong

Quoted 58 lines · Alan Casey

Hi,

Yes i had a problem with using one of the Linux 2.6.26 kernel versions on the XUPV2P board where the VGA display has not driven correctly, not sure why. The Linux 2.6.24 kernel from git.xilinx.com works fine.

Regards,
Alan.

Quoted 9 lines

-- Original Message --
Date: Fri, 15 Aug 2008 01:43:37 -0700 (PDT)
From: wangyanlong <[email protected]>
To: [email protected]
Subject: Re: Linux issues on Xilinx XUPV2P board

I meet the problem as yours . And my vga's display is not clear , have

you

Quoted 36 lines

meet this?

Quoted 33 lines · Alan Casey

Hi,

I have tried running the Linux 2.6.24 and Linux 2.6.26 kernels from

git.xilinx.com on the Xilinx XUPV2P board but have run into a few
problems.

Cross-compiler i use to compile applications was built using
Crosstools
and
based on gcc 3.3.4. I use Xilinx EDK 7.1 for integrating hardware
peripherals
onto the board.

The problems i've seen are:

(i) gettimeofday software function returns time of 0 all the time.

(ii) The Linux 2.6.24 kernel's Xilinx Framebuffer driver and/or the
Xilinx

PLB TFT Controller IP block (plb_tft_cntlr_ref_v1_00_d) does not
appear

to centre the display on a VGA screen properly(vertically
offset).

(iii) 64-bit write/read access to peripheral integrated onto the
Xilinx

Virtex-II Pro FPGA either causes a system crash or only lower

Quoted 41 lines

part

Quoted 6 lines
Quoted 6 lines

of 32-bit data to be written (i.e. lower part of 64-bit data
appears
to be mirrored on the upper and lower 32-bits of the system
bus).
However, 32-bit write/read access to the peripheral passes as

well

Quoted 33 lines
Quoted 8 lines

as 64-bit write/read access to the SDRAM memory address space. Peripheral interface has been verified to be IBM PLB compliant

via IBM bus functional model simulations.

(iv) The Linux 2.6.26 Xilinx Framebuffer driver on the Xilinx XUPV2P
board

Quoted 6 lines

does not appear to be working - nothing displayed to
screen/console

not switching to framebuffer device on bootup.

Just wondering if anybody has seen these issues before and know how

to

Quoted 15 lines

resolve them?

Any info. appreciated,
Regards,
Alan.

_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

Signature · 1 line
View this message in context:

http://www.nabble.com/Linux-issues-on-Xilinx-XUPV2P-board-tp18262250p18995644.html

Quoted 14 lines
Quoted 6 lines

Sent from the linuxppc-embedded mailing list archive at Nabble.com.

_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

Signature · 2 lines
View this message in context: http://www.nabble.com/Linux-issues-on-Xilinx-XUPV2P-board-tp18262250p18997255.html
Sent from the linuxppc-embedded mailing list archive at Nabble.com.
author
#4 lore raw

Hi,

I used version 2.6.24. Current version is 2.6.26+ but im not sure how to download previous versions from the git tree, there should be some info at http://git.xilinx.com
about how to do this.

Regards,
Alan.

Quoted 11 lines

-- Original Message --
Date: Fri, 15 Aug 2008 04:35:01 -0700 (PDT)
From: wangyanlong <[email protected]>
To: [email protected]
Subject: Re: Linux issues on Xilinx XUPV2P board

Hi Alan
I dow load the kernel from "
http://git.xilinx.com/cgi-bin/gitweb.cgi?p=3Dlinux-2.6-xlnx.git;a=3Dsumm=

ary
"

Quoted 2 lines

Merge ../../linux-2.6 into 2.6.26-merge master commit | commitdiff | t=

ree

Quoted 30 lines

| snapshot

this version ,but it not work well,which version you downloaded?

Many thanks
yanlong

Quoted 21 lines · Alan Casey

Hi,

Yes i had a problem with using one of the Linux 2.6.26 kernel versions on the XUPV2P board where the VGA display has not driven correctly, not sure why. The Linux 2.6.24 kernel from git.xilinx.com works fine.

Regards,
Alan.

Quoted 9 lines

-- Original Message --
Date: Fri, 15 Aug 2008 01:43:37 -0700 (PDT)
From: wangyanlong <[email protected]>
To: [email protected]
Subject: Re: Linux issues on Xilinx XUPV2P board

I meet the problem as yours . And my vga's display is not clear , hav=

e

Quoted 8 lines
Quoted 8 lines

you

Quoted 7 lines

meet this?

Quoted 4 lines · Alan Casey

Hi,

I have tried running the Linux 2.6.24 and Linux 2.6.26 kernels fro=

m

Quoted 12 lines
Quoted 12 lines
Quoted 12 lines
Quoted 12 lines

git.xilinx.com on the Xilinx XUPV2P board but have run into a few
problems.

Cross-compiler i use to compile applications was built using
Crosstools
and
based on gcc 3.3.4. I use Xilinx EDK 7.1 for integrating hardware
peripherals
onto the board.

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines

The problems i've seen are:

(i) gettimeofday software function returns time of 0 all the time.=

(ii) The Linux 2.6.24 kernel's Xilinx Framebuffer driver and/or th=

e

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

Xilinx

PLB TFT Controller IP block (plb_tft_cntlr_ref_v1_00_d) does

not

Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines

appear

to centre the display on a VGA screen properly(vertically
offset).

(iii) 64-bit write/read access to peripheral integrated onto the
Xilinx

Virtex-II Pro FPGA either causes a system crash or only lowe=

r

Quoted 8 lines
Quoted 8 lines

part

Quoted 7 lines
Quoted 7 lines

of 32-bit data to be written (i.e. lower part of 64-bit data=

appears
to be mirrored on the upper and lower 32-bits of the system
bus).
However, 32-bit write/read access to the peripheral passes a=

s

Quoted 2 lines
Quoted 2 lines

well

Quoted 1 line
Quoted 1 line

as 64-bit write/read access to the SDRAM memory address spac=

e.

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

Peripheral interface has been verified to be IBM PLB complia=

nt

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

via IBM bus functional model simulations.

(iv) The Linux 2.6.26 Xilinx Framebuffer driver on the Xilinx XUP=

V2P

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

board

does not appear to be working - nothing displayed to
screen/console

not switching to framebuffer device on bootup.

Just wondering if anybody has seen these issues before and know h=

ow

Quoted 17 lines
Quoted 17 lines
Quoted 17 lines

to

Quoted 15 lines

resolve them?

Any info. appreciated,
Regards,
Alan.

_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

Quoted 3 lines
Quoted 2 lines
Quoted 2 lines
Signature · 1 line
View this message in context:

http://www.nabble.com/Linux-issues-on-Xilinx-XUPV2P-board-tp18262250p189=

95644.html

Quoted 8 lines
Quoted 8 lines
Quoted 6 lines

Sent from the linuxppc-embedded mailing list archive at Nabble.com.

_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

Quoted 9 lines
Quoted 6 lines

_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

Signature · 1 line
View this message in context: http://www.nabble.com/Linux-issues-on-Xili=

nx-XUPV2P-board-tp18262250p18997255.html

Quoted 6 lines

Sent from the linuxppc-embedded mailing list archive at Nabble.com.

_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

#5 lore raw

Hi Alan,

I'm assuming you must not have Git installed from the question, otherwise you would be using git clone as the site shows.

On the http://git.xilinx.com, it says the following, =

Users without Git installed may create a tar file by using the snapshot feature. Select the tree view of the repository (far right side) on this page, then select snapshot (near the top) and a gziped tar file will be created and downloaded. =

Is this what you're looking for?

-- John

Quoted 254 lines

-----Original Message-----
From: =

[email protected] =

[mailto:linuxppc-embedded-bounces+john.linn=3Dxilinx.com@ozlabs. org] On Behalf Of Alan Casey
Sent: Friday, August 15, 2008 6:34 AM
To: wangyanlong; [email protected]
Subject: Re: Linux issues on Xilinx XUPV2P board
=

Hi,
=

I used version 2.6.24. Current version is 2.6.26+ but im not sure how to download previous versions from the git tree, there should be some info at http://git.xilinx.com
about how to do this.
=

Regards,
Alan.
=

Quoted 8 lines

-- Original Message --
Date: Fri, 15 Aug 2008 04:35:01 -0700 (PDT)
From: wangyanlong <[email protected]>
To: [email protected]
Subject: Re: Linux issues on Xilinx XUPV2P board

Quoted 4 lines

Hi Alan =

I dow load the kernel from "
http://git.xilinx.com/cgi-bin/gitweb.cgi?p=3Dlinux-2.6-xlnx.git

;a=3Dsummary
"

Quoted 2 lines

Merge ../../linux-2.6 into 2.6.26-merge master commit | =

commitdiff | tree

Quoted 37 lines

| snapshot
=

this version ,but it not work well,which version you downloaded?

Many thanks
yanlong
=

Quoted 26 lines · Alan Casey

=

Hi,
=

Yes i had a problem with using one of the Linux 2.6.26 kernel versions on the XUPV2P board where the VGA display has not driven correctly, not sure why. The Linux 2.6.24 kernel from git.xilinx.com works fine.
=

Regards,
Alan.
=

=

Quoted 9 lines

-- Original Message --
Date: Fri, 15 Aug 2008 01:43:37 -0700 (PDT)
From: wangyanlong <[email protected]>
To: [email protected]
Subject: Re: Linux issues on Xilinx XUPV2P board

I meet the problem as yours . And my vga's display is not =

clear , have

Quoted 10 lines
Quoted 10 lines

you

Quoted 9 lines

meet this?

Quoted 6 lines · Alan Casey

=

Hi,
=

I have tried running the Linux 2.6.24 and Linux 2.6.26 =

kernels from

Quoted 5 lines
Quoted 5 lines

=

Quoted 3 lines

=

Quoted 1 line

git.xilinx.com on the Xilinx XUPV2P board but have run =

into a few

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines

problems.
=

Cross-compiler i use to compile applications was built using
Crosstools
and
based on gcc 3.3.4. I use Xilinx EDK 7.1 for =

integrating hardware

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

peripherals
onto the board.
=

The problems i've seen are:
=

(i) gettimeofday software function returns time of 0 =

all the time.

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

=

(ii) The Linux 2.6.24 kernel's Xilinx Framebuffer =

driver and/or the

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

Xilinx

PLB TFT Controller IP block =

(plb_tft_cntlr_ref_v1_00_d) does
not

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

appear
=

to centre the display on a VGA screen properly(vertically
offset).
=

(iii) 64-bit write/read access to peripheral =

integrated onto the

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

Xilinx
=

Virtex-II Pro FPGA either causes a system crash =

or only lower

Quoted 4 lines
Quoted 4 lines

part

Quoted 3 lines
Quoted 3 lines

=

of 32-bit data to be written (i.e. lower part of =

64-bit data

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

appears
to be mirrored on the upper and lower 32-bits of =

the system

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

bus).
However, 32-bit write/read access to the =

peripheral passes as

Quoted 2 lines
Quoted 2 lines

well

Quoted 1 line
Quoted 1 line

as 64-bit write/read access to the SDRAM memory =

address space.

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

Peripheral interface has been verified to be IBM =

PLB compliant

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines

via IBM bus functional model simulations. =

=

(iv) The Linux 2.6.26 Xilinx Framebuffer driver on =

the Xilinx XUPV2P

Quoted 7 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines

board
=

does not appear to be working - nothing displayed to
screen/console
=

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

not switching to framebuffer device on bootup. =

=

Just wondering if anybody has seen these issues =

before and know how

Quoted 21 lines
Quoted 20 lines
Quoted 20 lines

to

Quoted 19 lines

resolve them?
=

Any info. appreciated,
Regards,
Alan.
=

=

=

=

_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
=

Quoted 7 lines
Quoted 6 lines
Quoted 6 lines
Quoted 1 line

=

-- =

View this message in context:

http://www.nabble.com/Linux-issues-on-Xilinx-XUPV2P-board-tp1

8262250p18995644.html

Quoted 16 lines
Quoted 15 lines
Quoted 6 lines

Sent from the linuxppc-embedded mailing list archive at Nabble.com.

_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

=

=

_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
=

Quoted 6 lines
Quoted 1 line

=

-- =

View this message in context: =

http://www.nabble.com/Linux-issues-on-Xilinx-XUPV2P-board-tp18
262250p18997255.html

Quoted 6 lines

Sent from the linuxppc-embedded mailing list archive at Nabble.com.

_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

=

=

Quoted 7 lines

_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
=

=

This email and any attachments are intended for the sole use of the named r= ecipient(s) and contain(s) confidential information that may be proprietary= , privileged or copyrighted under applicable law. If you are not the intend= ed recipient, do not read, copy, or forward this email message or any attac= hments. Delete this email message and any attachments immediately.

author
#6 lore raw

Hi John,

Im not having any problems using GIT. I can download 2.6.26 using git no problem - i think wangyanlong would like to use 2.6.24 or 2.6.26 and he has problems downloading it using git - hence i replied to him that he may find more info about how to download the current or previous version on git.xilinx.com. I think you misread my email.

The Xilinx Framebuffer driver works fine in Linux 2.6.24 but there appears to be a problem with one of the Linux-2.6.26 versions which i posted about a few weeks/months ago.

Alan.

Quoted 216 lines

-- Original Message --
Subject: RE: Linux issues on Xilinx XUPV2P board
Date: Fri, 15 Aug 2008 08:30:25 -0600
From: John Linn <[email protected]>
To: <[email protected]>,
"wangyanlong" <[email protected]>,
<[email protected]>

Hi Alan,

I'm assuming you must not have Git installed from the question, otherwise you would be using git clone as the site shows.

On the http://git.xilinx.com, it says the following,

Users without Git installed may create a tar file by using the snapshot feature. Select the tree view of the repository (far right side) on this=

page, then select snapshot (near the top) and a gziped tar file will be created and downloaded.

Is this what you're looking for?

-- John

Quoted 190 lines

-----Original Message-----
From:
[email protected] [mailto:linuxppc-embedded-bounces+john.linn=3Dxilinx.com@ozlabs. org] On Behalf Of Alan Casey
Sent: Friday, August 15, 2008 6:34 AM
To: wangyanlong; [email protected]
Subject: Re: Linux issues on Xilinx XUPV2P board

Hi,

I used version 2.6.24. Current version is 2.6.26+ but im not sure how to download previous versions from the git tree, there should be some info at http://git.xilinx.com
about how to do this.

Regards,
Alan.

Quoted 11 lines

-- Original Message --
Date: Fri, 15 Aug 2008 04:35:01 -0700 (PDT)
From: wangyanlong <[email protected]>
To: [email protected]
Subject: Re: Linux issues on Xilinx XUPV2P board

Hi Alan
I dow load the kernel from "
http://git.xilinx.com/cgi-bin/gitweb.cgi?p=3Dlinux-2.6-xlnx.git

;a=3Dsummary
"

Quoted 2 lines

Merge ../../linux-2.6 into 2.6.26-merge master commit |

commitdiff | tree

Quoted 30 lines

| snapshot

this version ,but it not work well,which version you downloaded?

Many thanks
yanlong

Quoted 21 lines · Alan Casey

Hi,

Yes i had a problem with using one of the Linux 2.6.26 kernel versions on the XUPV2P board where the VGA display has not driven correctly, not sure why. The Linux 2.6.24 kernel from git.xilinx.com works fine.

Regards,
Alan.

Quoted 9 lines

-- Original Message --
Date: Fri, 15 Aug 2008 01:43:37 -0700 (PDT)
From: wangyanlong <[email protected]>
To: [email protected]
Subject: Re: Linux issues on Xilinx XUPV2P board

I meet the problem as yours . And my vga's display is not

clear , have

Quoted 8 lines
Quoted 8 lines

you

Quoted 7 lines

meet this?

Quoted 4 lines · Alan Casey

Hi,

I have tried running the Linux 2.6.24 and Linux 2.6.26

kernels from

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

git.xilinx.com on the Xilinx XUPV2P board but have run

into a few

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines

problems.

Cross-compiler i use to compile applications was built using
Crosstools
and
based on gcc 3.3.4. I use Xilinx EDK 7.1 for

integrating hardware

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines

peripherals
onto the board.

The problems i've seen are:

(i) gettimeofday software function returns time of 0

all the time.

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

(ii) The Linux 2.6.24 kernel's Xilinx Framebuffer

driver and/or the

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

Xilinx

PLB TFT Controller IP block

(plb_tft_cntlr_ref_v1_00_d) does
not

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines

appear

to centre the display on a VGA screen properly(vertically
offset).

(iii) 64-bit write/read access to peripheral

integrated onto the

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

Xilinx

Virtex-II Pro FPGA either causes a system crash

or only lower

Quoted 3 lines
Quoted 3 lines

part

Quoted 2 lines
Quoted 2 lines

of 32-bit data to be written (i.e. lower part of

64-bit data

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

appears
to be mirrored on the upper and lower 32-bits of

the system

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

bus).
However, 32-bit write/read access to the

peripheral passes as

Quoted 2 lines
Quoted 2 lines

well

Quoted 1 line
Quoted 1 line

as 64-bit write/read access to the SDRAM memory

address space.

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

Peripheral interface has been verified to be IBM

PLB compliant

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

via IBM bus functional model simulations.

(iv) The Linux 2.6.26 Xilinx Framebuffer driver on

the Xilinx XUPV2P

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

board

does not appear to be working - nothing displayed to
screen/console

not switching to framebuffer device on bootup.

Just wondering if anybody has seen these issues

before and know how

Quoted 17 lines
Quoted 17 lines
Quoted 17 lines

to

Quoted 15 lines

resolve them?

Any info. appreciated,
Regards,
Alan.

_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

Quoted 3 lines
Quoted 2 lines
Quoted 2 lines
Signature · 1 line
View this message in context:

http://www.nabble.com/Linux-issues-on-Xilinx-XUPV2P-board-tp1

8262250p18995644.html

Quoted 9 lines
Quoted 9 lines
Quoted 7 lines

Sent from the linuxppc-embedded mailing list archive at Nabble.com.=

_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

Quoted 9 lines
Quoted 6 lines

_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

Signature · 1 line
View this message in context: 

http://www.nabble.com/Linux-issues-on-Xilinx-XUPV2P-board-tp18
262250p18997255.html

Quoted 6 lines

Sent from the linuxppc-embedded mailing list archive at Nabble.com.

_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

Quoted 8 lines
Quoted 6 lines

_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

This email and any attachments are intended for the sole use of the name=

d

Quoted 1 line

recipient(s) and contain(s) confidential information that may be proprie=

tary,

Quoted 1 line

privileged or copyrighted under applicable law. If you are not the inten=

ded

Quoted 1 line

recipient, do not read, copy, or forward this email message or any attac=

hments.

Quoted 3 lines

Delete this email message and any attachments immediately.

#7 lore raw

Ah I see, sorry about that, misunderstood what was needed.

So there may be other ways as I'm not a Git expert, but I clone the repository, then reset to the a Git tag.

Quoted 1 line

git reset --hard <tag name>

We're working on a new frame buffer driver for a new core, but the old frame buffer has not been high priority for us.

Thanks,
John =

Quoted 344 lines

-----Original Message-----
From: Alan Casey [mailto:[email protected]] =

Sent: Friday, August 15, 2008 8:36 AM
To: John Linn; wangyanlong; [email protected]
Subject: RE: Linux issues on Xilinx XUPV2P board =

Hi John,
=

Im not having any problems using GIT. I can download 2.6.26 using git no problem - i think wangyanlong would like to use 2.6.24 or 2.6.26 and he has problems downloading it using git - hence i replied to him that he may find more info about how to download the current or previous version on git.xilinx.com. I think you misread my email.
=

The Xilinx Framebuffer driver works fine in Linux 2.6.24 but there appears to be a problem with one of the Linux-2.6.26 versions which i posted about a few weeks/months ago.
=

Alan.
=

Quoted 11 lines

-- Original Message --
Subject: RE: Linux issues on Xilinx XUPV2P board
Date: Fri, 15 Aug 2008 08:30:25 -0600
From: John Linn <[email protected]>
To: <[email protected]>,
"wangyanlong" <[email protected]>,
<[email protected]>

Hi Alan,

Quoted 7 lines

I'm assuming you must not have Git installed from the question, otherwise you would be using git clone as the site shows.

On the http://git.xilinx.com, it says the following, =

Users without Git installed may create a tar file by using =

the snapshot

Quoted 1 line

feature. Select the tree view of the repository (far right =

side) on this

Quoted 1 line

page, then select snapshot (near the top) and a gziped tar =

file will be

Quoted 142 lines

created and downloaded. =

Is this what you're looking for?

-- John

Quoted 135 lines

-----Original Message-----
From: =

[email protected] =

[mailto:linuxppc-embedded-bounces+john.linn=3Dxilinx.com@ozlabs. org] On Behalf Of Alan Casey
Sent: Friday, August 15, 2008 6:34 AM
To: wangyanlong; [email protected]
Subject: Re: Linux issues on Xilinx XUPV2P board
=

Hi,
=

I used version 2.6.24. Current version is 2.6.26+ but im not sure how to download previous versions from the git tree, there should be some info at http://git.xilinx.com
about how to do this.
=

Regards,
Alan.
=

Quoted 8 lines

-- Original Message --
Date: Fri, 15 Aug 2008 04:35:01 -0700 (PDT)
From: wangyanlong <[email protected]>
To: [email protected]
Subject: Re: Linux issues on Xilinx XUPV2P board

Quoted 4 lines

Hi Alan =

I dow load the kernel from "
http://git.xilinx.com/cgi-bin/gitweb.cgi?p=3Dlinux-2.6-xlnx.git

;a=3Dsummary
"

Quoted 2 lines

Merge ../../linux-2.6 into 2.6.26-merge master commit | =

commitdiff | tree

Quoted 37 lines

| snapshot
=

this version ,but it not work well,which version you downloaded?

Many thanks
yanlong
=

Quoted 26 lines · Alan Casey

=

Hi,
=

Yes i had a problem with using one of the Linux 2.6.26 kernel versions on the XUPV2P board where the VGA display has not driven correctly, not sure why. The Linux 2.6.24 kernel from git.xilinx.com works fine.
=

Regards,
Alan.
=

=

Quoted 9 lines

-- Original Message --
Date: Fri, 15 Aug 2008 01:43:37 -0700 (PDT)
From: wangyanlong <[email protected]>
To: [email protected]
Subject: Re: Linux issues on Xilinx XUPV2P board

I meet the problem as yours . And my vga's display is not =

clear , have

Quoted 10 lines
Quoted 10 lines

you

Quoted 9 lines

meet this?

Quoted 6 lines · Alan Casey

=

Hi,
=

I have tried running the Linux 2.6.24 and Linux 2.6.26 =

kernels from

Quoted 5 lines
Quoted 5 lines

=

Quoted 3 lines

=

Quoted 1 line

git.xilinx.com on the Xilinx XUPV2P board but have run =

into a few

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines

problems.
=

Cross-compiler i use to compile applications was built using
Crosstools
and
based on gcc 3.3.4. I use Xilinx EDK 7.1 for =

integrating hardware

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

peripherals
onto the board.
=

The problems i've seen are:
=

(i) gettimeofday software function returns time of 0 =

all the time.

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

=

(ii) The Linux 2.6.24 kernel's Xilinx Framebuffer =

driver and/or the

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

Xilinx

PLB TFT Controller IP block =

(plb_tft_cntlr_ref_v1_00_d) does
not

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

appear
=

to centre the display on a VGA screen =

properly(vertically

Quoted 78 lines
Quoted 78 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

offset).
=

(iii) 64-bit write/read access to peripheral =

integrated onto the

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

Xilinx
=

Virtex-II Pro FPGA either causes a system crash =

or only lower

Quoted 4 lines
Quoted 4 lines

part

Quoted 3 lines
Quoted 3 lines

=

of 32-bit data to be written (i.e. lower part of =

64-bit data

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

appears
to be mirrored on the upper and lower 32-bits of =

the system

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

bus).
However, 32-bit write/read access to the =

peripheral passes as

Quoted 2 lines
Quoted 2 lines

well

Quoted 1 line
Quoted 1 line

as 64-bit write/read access to the SDRAM memory =

address space.

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

Peripheral interface has been verified to be IBM =

PLB compliant

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines

via IBM bus functional model simulations. =

=

(iv) The Linux 2.6.26 Xilinx Framebuffer driver on =

the Xilinx XUPV2P

Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines

board
=

does not appear to be working - nothing displayed to
screen/console

not switching to framebuffer device on bootup. =

=

Just wondering if anybody has seen these issues =

before and know how

Quoted 24 lines
Quoted 24 lines
Quoted 24 lines

to

Quoted 21 lines

resolve them?
=

Any info. appreciated,
Regards,
Alan.
=

=

=

=

_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
=

=

Quoted 6 lines
Quoted 6 lines
Quoted 4 lines
Quoted 3 lines
Quoted 3 lines

-- =

View this message in context:

http://www.nabble.com/Linux-issues-on-Xilinx-XUPV2P-board-tp1

8262250p18995644.html

Quoted 1 line
Quoted 1 line
Quoted 1 line

Sent from the linuxppc-embedded mailing list archive at =

Nabble.com.

Quoted 18 lines
Quoted 18 lines
Quoted 18 lines
Quoted 16 lines
Quoted 5 lines

_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

=

=

_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
=

=

Quoted 7 lines
Quoted 7 lines
Quoted 3 lines

-- =

View this message in context: =

http://www.nabble.com/Linux-issues-on-Xilinx-XUPV2P-board-tp18
262250p18997255.html

Quoted 1 line

Sent from the linuxppc-embedded mailing list archive at =

Nabble.com.

Quoted 15 lines
Quoted 14 lines
Quoted 5 lines

_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

=

=

_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
=

Quoted 4 lines
Quoted 1 line

=

This email and any attachments are intended for the sole use =

of the named

Quoted 1 line

recipient(s) and contain(s) confidential information that =

may be proprietary,

Quoted 1 line

privileged or copyrighted under applicable law. If you are =

not the intended

Quoted 1 line

recipient, do not read, copy, or forward this email message =

or any attachments.

Quoted 3 lines

Delete this email message and any attachments immediately.

Quoted 7 lines

=

=

=

=

This email and any attachments are intended for the sole use of the named r= ecipient(s) and contain(s) confidential information that may be proprietary= , privileged or copyrighted under applicable law. If you are not the intend= ed recipient, do not read, copy, or forward this email message or any attac= hments. Delete this email message and any attachments immediately.

#8 lore raw
Quoted 5 lines · John Linn

Ah I see, sorry about that, misunderstood what was needed.

So there may be other ways as I'm not a Git expert, but I clone the repository, then reset to the a Git tag.

Quoted 7 lines
Quoted 1 line

git reset --hard <tag name>

We're working on a new frame buffer driver for a new core, but the old frame buffer has not been high priority for us.

Thanks,
John

While this "Works" in the sense that it makes your working directory look like the contents of the given tag, you are now using a "detached HEAD" -- ie, no real branch.

If you think you will ever want to make a change or check in something, you might be better to create a branch based on the original tag, perhaps something like:

   $ git checkout -b my-v2.6.24 v2.6.24

HTH,
jdl

#9 lore raw
In reply to Alan Casey

Hi

	v2.6.24
	v2.6.24-rc8
	v2.6.24-rc7
	v2.6.24-rc6
	v2.6.24-rc5
	v2.6.24-rc4
	v2.6.24-rc3
	v2.6.24-rc2

many versions, which one ???
Thanks :)

	v2.6.24-rc1

Hi,

I used version 2.6.24. Current version is 2.6.26+ but im not sure how to download previous versions from the git tree, there should be some info at http://git.xilinx.com
about how to do this.

Regards,
Alan.

Signature · 2 lines
View this message in context: http://www.nabble.com/Linux-issues-on-Xilinx-XUPV2P-board-tp18262250p18999662.html
Sent from the linuxppc-embedded mailing list archive at Nabble.com.
author
#10 lore raw

Hi,

2.6.24-rc8 was the version i think i used.
2.6.24 should be fine also.

Alan.

Quoted 27 lines

-- Original Message --
Date: Fri, 15 Aug 2008 07:31:35 -0700 (PDT)
From: wangyanlong <[email protected]>
To: [email protected]
Subject: Re: Linux issues on Xilinx XUPV2P board

Hi

	v2.6.24
	v2.6.24-rc8
	v2.6.24-rc7
	v2.6.24-rc6
	v2.6.24-rc5
	v2.6.24-rc4
	v2.6.24-rc3
	v2.6.24-rc2

many versions, which one ???
Thanks :)

	v2.6.24-rc1

Hi,

Quoted 11 lines

I used version 2.6.24. Current version is 2.6.26+ but im not sure how to download previous versions from the git tree, there should be some info at http://git.xilinx.com
about how to do this.

Regards,
Alan.

Signature · 1 line
View this message in context: http://www.nabble.com/Linux-issues-on-Xili=

nx-XUPV2P-board-tp18262250p18999662.html

Quoted 6 lines

Sent from the linuxppc-embedded mailing list archive at Nabble.com.

_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

#11 lore raw

Hi
For 4 days ,i corrected the ip 's bug . Thanks for your help . The
solution is here http://www.openhard.org/myspace/blog/show_155462.html
Regards
yanlong

Quoted 46 lines · Alan Casey

Hi,

2.6.24-rc8 was the version i think i used.
2.6.24 should be fine also.

Alan.

Quoted 38 lines

-- Original Message --
Date: Fri, 15 Aug 2008 07:31:35 -0700 (PDT)
From: wangyanlong <[email protected]>
To: [email protected]
Subject: Re: Linux issues on Xilinx XUPV2P board

Hi

	v2.6.24
	v2.6.24-rc8
	v2.6.24-rc7
	v2.6.24-rc6
	v2.6.24-rc5
	v2.6.24-rc4
	v2.6.24-rc3
	v2.6.24-rc2

many versions, which one ???
Thanks :)

	v2.6.24-rc1

Hi,

I used version 2.6.24. Current version is 2.6.26+ but im not sure how to download previous versions from the git tree, there should be some info at http://git.xilinx.com
about how to do this.

Regards,
Alan.

Signature · 1 line
View this message in context:

http://www.nabble.com/Linux-issues-on-Xilinx-XUPV2P-board-tp18262250p18999662.html

Quoted 14 lines
Quoted 6 lines

Sent from the linuxppc-embedded mailing list archive at Nabble.com.

_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

Signature · 2 lines
View this message in context: http://www.nabble.com/Linux-issues-on-Xilinx-XUPV2P-board-tp18262250p19243481.html
Sent from the linuxppc-embedded mailing list archive at Nabble.com.